contiki/tools/cooja/contiki_tests/sky_ipv6_udp_fragmentation.csc

158 lines
6.1 KiB
Plaintext

<?xml version="1.0" encoding="UTF-8"?>
<simconf>
<project>../apps/mrm</project>
<project>../apps/mspsim</project>
<project>../apps/avrora</project>
<project>../apps/native_gateway</project>
<simulation>
<title>My simulation</title>
<delaytime>0</delaytime>
<randomseed>generated</randomseed>
<motedelay_us>1000000</motedelay_us>
<radiomedium>
se.sics.cooja.radiomediums.UDGM
<transmitting_range>50.0</transmitting_range>
<interference_range>100.0</interference_range>
<success_ratio_tx>1.0</success_ratio_tx>
<success_ratio_rx>1.0</success_ratio_rx>
</radiomedium>
<motetype>
se.sics.cooja.mspmote.SkyMoteType
<identifier>sky1</identifier>
<description>Sky Mote Type #1</description>
<source>../../../examples/udp-sender-ipv6/example-udp-sender.c</source>
<commands>make clean TARGET=sky
make example-udp-sender.sky TARGET=sky DEFINES=WITH_UIP6,UDP_ADDR_A=0xfe80,UDP_ADDR_B=0,UDP_ADDR_C=0,UDP_ADDR_D=0,UDP_ADDR_E=0x0212,UDP_ADDR_F=0x7402,UDP_ADDR_G=0x02,UDP_ADDR_H=0x202,SICSLOWPAN_CONF_FRAG=1,SEND_TOO_LARGE_PACKET_TO_TEST_FRAGMENTATION=1</commands>
<firmware>../../../examples/udp-sender-ipv6/example-udp-sender.sky</firmware>
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyByteRadio</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.SkySerial</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
</motetype>
<motetype>
se.sics.cooja.mspmote.SkyMoteType
<identifier>sky2</identifier>
<description>Sky Mote Type #2</description>
<source>../../../examples/udp-receiver-ipv6/example-udp-receiver.c</source>
<commands>make clean TARGET=sky
make example-udp-receiver.sky TARGET=sky DEFINES=WITH_UIP6,UDP_ADDR_A=0xfe80,UDP_ADDR_B=0,UDP_ADDR_C=0,UDP_ADDR_D=0,UDP_ADDR_E=0x0212,UDP_ADDR_F=0x7401,UDP_ADDR_G=0x01,UDP_ADDR_H=0x101,SICSLOWPAN_CONF_FRAG=1</commands>
<firmware>../../../examples/udp-receiver-ipv6/example-udp-receiver.sky</firmware>
<moteinterface>se.sics.cooja.interfaces.Position</moteinterface>
<moteinterface>se.sics.cooja.interfaces.IPAddress</moteinterface>
<moteinterface>se.sics.cooja.interfaces.Mote2MoteRelations</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.MspClock</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.MspMoteID</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyButton</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyFlash</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyByteRadio</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.SkySerial</moteinterface>
<moteinterface>se.sics.cooja.mspmote.interfaces.SkyLED</moteinterface>
</motetype>
<mote>
se.sics.cooja.mspmote.SkyMote
<motetype_identifier>sky1</motetype_identifier>
<breakpoints />
<interface_config>
se.sics.cooja.interfaces.Position
<x>65.934608127183</x>
<y>63.70462190529231</y>
<z>0.0</z>
</interface_config>
<interface_config>
se.sics.cooja.mspmote.interfaces.MspMoteID
<id>1</id>
</interface_config>
</mote>
<mote>
se.sics.cooja.mspmote.SkyMote
<motetype_identifier>sky2</motetype_identifier>
<breakpoints />
<interface_config>
se.sics.cooja.interfaces.Position
<x>67.66105781539623</x>
<y>63.13924301161143</y>
<z>0.0</z>
</interface_config>
<interface_config>
se.sics.cooja.mspmote.interfaces.MspMoteID
<id>2</id>
</interface_config>
</mote>
</simulation>
<plugin>
se.sics.cooja.plugins.SimControl
<width>248</width>
<z>3</z>
<height>200</height>
<location_x>0</location_x>
<location_y>0</location_y>
<minimized>false</minimized>
</plugin>
<plugin>
se.sics.cooja.plugins.LogListener
<plugin_config>
<filter />
</plugin_config>
<width>816</width>
<z>1</z>
<height>333</height>
<location_x>1</location_x>
<location_y>365</location_y>
<minimized>false</minimized>
</plugin>
<plugin>
se.sics.cooja.plugins.Visualizer
<plugin_config>
<skin>Mote IDs</skin>
<skin>Addresses: IP or Rime</skin>
<skin>Radio environment (UDGM)</skin>
</plugin_config>
<width>246</width>
<z>0</z>
<height>167</height>
<location_x>0</location_x>
<location_y>198</location_y>
<minimized>false</minimized>
</plugin>
<plugin>
se.sics.cooja.plugins.ScriptRunner
<plugin_config>
<script>TIMEOUT(100000, log.log("last msg: " + msg + "\n")); /* print last msg at timeout */
WAIT_UNTIL(msg.contains("Created connection"));
YIELD_THEN_WAIT_UNTIL(msg.contains("Created connection"));
log.log("Both nodes booted\n");
count = 0;
while (count++ &lt; 5) {
/* Message from sender process to receiver process */
YIELD_THEN_WAIT_UNTIL(msg.contains("Sender sending"));
YIELD_THEN_WAIT_UNTIL(msg.contains("Receiver received"));
log.log(count + ": Sender -&gt; Receiver OK\n");
/* Message from receiver process to sender process */
YIELD_THEN_WAIT_UNTIL(msg.contains("Receiver sending"));
YIELD_THEN_WAIT_UNTIL(msg.contains("Sender received"));
log.log(count + ": Receiver -&gt; Sender OK\n");
}
log.testOK(); /* Report test success and quit */</script>
<active>true</active>
</plugin_config>
<width>572</width>
<z>2</z>
<height>700</height>
<location_x>246</location_x>
<location_y>-1</location_y>
<minimized>false</minimized>
</plugin>
</simconf>