contiki/platform/seedeye/dev/mrf24j40/mrf24j40.c
2014-04-03 13:38:31 +02:00

975 lines
25 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* Contiki SeedEye Platform project
*
* Copyright (c) 2012,
* Scuola Superiore Sant'Anna (http://www.sssup.it) and
* Consorzio Nazionale Interuniversitario per le Telecomunicazioni
* (http://www.cnit.it).
*
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the Institute nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/**
* \addtogroup mrf24j40 MRF24J40 Driver
*
* @{
*/
/**
* \file mrf24j40.c
*
* \brief MRF24J40 Driver
* \author Giovanni Pellerano <giovanni.pellerano@evilaliv3.org>
* \date 2012-03-21
*/
#include "contiki.h"
#include "mrf24j40.h"
#include "mrf24j40_arch.h"
#include <pic32_spi.h>
#include <pic32_irq.h>
#include "net/packetbuf.h"
#include "net/netstack.h"
#define DEBUG 0
#if DEBUG
#include <stdio.h>
#define PRINTF(...) printf(__VA_ARGS__)
#else
#define PRINTF(...)
#endif
/*---------------------------------------------------------------------------*/
PROCESS(mrf24j40_process, "MRF24J40 driver");
/*---------------------------------------------------------------------------*/
static volatile uint8_t mrf24j40_last_lqi;
static volatile uint8_t mrf24j40_last_rssi;
static volatile uint8_t status_tx;
static volatile uint8_t pending;
static volatile uint8_t receive_on;
/*---------------------------------------------------------------------------*/
static void
set_short_add_mem(uint8_t addr, uint8_t val)
{
const uint8_t tmp = MRF24J40_INTERRUPT_ENABLE_STAT();
uint8_t msg[2];
msg[0] = (addr << 1) | 0x01;
msg[1] = val;
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_CLR();
}
MRF24J40_CSn_LOW();
MRF24J40_SPI_PORT_WRITE(msg, 2);
MRF24J40_CSn_HIGH();
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_SET();
}
}
/*---------------------------------------------------------------------------*/
static void
set_long_add_mem(uint16_t addr, uint8_t val)
{
const uint8_t tmp = MRF24J40_INTERRUPT_ENABLE_STAT();
uint8_t msg[3];
msg[0] = (((uint8_t)(addr >> 3)) & 0x7F) | 0x80;
msg[1] = (((uint8_t)(addr << 5)) & 0xE0) | 0x10;
msg[2] = val;
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_CLR();
}
MRF24J40_CSn_LOW();
MRF24J40_SPI_PORT_WRITE(msg, 3);
MRF24J40_CSn_HIGH();
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_SET();
}
}
/*---------------------------------------------------------------------------*/
static uint8_t
get_short_add_mem(uint8_t addr)
{
const uint8_t tmp = MRF24J40_INTERRUPT_ENABLE_STAT();
uint8_t ret_val;
addr <<= 1;
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_CLR();
}
MRF24J40_CSn_LOW();
MRF24J40_SPI_PORT_WRITE(&addr, 1);
MRF24J40_SPI_PORT_READ(&ret_val, 1);
MRF24J40_CSn_HIGH();
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_SET();
}
return ret_val;
}
/*---------------------------------------------------------------------------*/
static uint8_t
get_long_add_mem(uint16_t addr)
{
const uint8_t tmp = MRF24J40_INTERRUPT_ENABLE_STAT();
uint8_t ret_val;
uint8_t msg[2];
msg[0] = (((uint8_t)(addr >> 3)) & 0x7F) | 0x80;
msg[1] = ((uint8_t)(addr << 5)) & 0xE0;
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_CLR();
}
MRF24J40_CSn_LOW();
MRF24J40_SPI_PORT_WRITE(msg, 2);
MRF24J40_SPI_PORT_READ(&ret_val, 1);
MRF24J40_CSn_HIGH();
if(tmp) {
MRF24J40_INTERRUPT_ENABLE_SET();
}
return ret_val;
}
/*---------------------------------------------------------------------------*/
static void
reset_rf_state_machine(void)
{
/*
* Reset RF state machine
*/
const uint8_t rfctl = get_short_add_mem(MRF24J40_RFCTL);
set_short_add_mem(MRF24J40_RFCTL, rfctl | 0b00000100);
set_short_add_mem(MRF24J40_RFCTL, rfctl & 0b11111011);
clock_delay_usec(2500);
}
/*---------------------------------------------------------------------------*/
void
flush_rx_fifo(void)
{
set_short_add_mem(MRF24J40_RXFLUSH, get_short_add_mem(MRF24J40_RXFLUSH) | 0b00000001);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Set the channel
*
* This routine sets the rx/tx channel
*/
void
mrf24j40_set_channel(uint16_t ch)
{
set_long_add_mem(MRF24J40_RFCON0, ((ch - 11) << 4) | 0b00000011);
reset_rf_state_machine();
}
/*---------------------------------------------------------------------------*/
/**
* \brief Store MAC PAN ID
*
* This routine sets the MAC PAN ID in the MRF24J40.
*/
void
mrf24j40_set_panid(uint16_t id)
{
set_short_add_mem(MRF24J40_PANIDL, (uint8_t)id);
set_short_add_mem(MRF24J40_PANIDH, (uint8_t)(id >> 8));
}
/*---------------------------------------------------------------------------*/
/**
* \brief Store short MAC address
*
* This routine sets the short MAC address in the MRF24J40.
*/
void
mrf24j40_set_short_mac_addr(uint16_t addr)
{
set_short_add_mem(MRF24J40_SADRL, (uint8_t)addr);
set_short_add_mem(MRF24J40_SADRH, (uint8_t)(addr >> 8));
}
/*---------------------------------------------------------------------------*/
/**
* \brief Store extended MAC address
*
* This routine sets the extended MAC address in the MRF24J40.
*/
void
mrf24j40_set_extended_mac_addr(uint64_t addr)
{
set_short_add_mem(MRF24J40_EADR7, (uint8_t)addr);
set_short_add_mem(MRF24J40_EADR6, (uint8_t)(addr >> 8));
set_short_add_mem(MRF24J40_EADR5, (uint8_t)(addr >> 16));
set_short_add_mem(MRF24J40_EADR4, (uint8_t)(addr >> 24));
set_short_add_mem(MRF24J40_EADR3, (uint8_t)(addr >> 32));
set_short_add_mem(MRF24J40_EADR2, (uint8_t)(addr >> 40));
set_short_add_mem(MRF24J40_EADR1, (uint8_t)(addr >> 48));
set_short_add_mem(MRF24J40_EADR0, (uint8_t)(addr >> 56));
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get short MAC address
*
* This routine gets the short MAC address stored in the MRF24J40.
*/
void
mrf24j40_get_short_mac_addr(uint16_t *addr)
{
*(((uint8_t *)& addr)) = get_short_add_mem(MRF24J40_SADRH);
*(((uint8_t *)& addr) + 1) = get_short_add_mem(MRF24J40_SADRL);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Gets extended MAC address
*
* This routine gets the extended MAC address stored in the MRF24J40.
*/
void
mrf24j40_get_extended_mac_addr(uint64_t *addr)
{
*(((uint8_t *)& addr)) = get_short_add_mem(MRF24J40_EADR7);
*(((uint8_t *)& addr) + 1) = get_short_add_mem(MRF24J40_EADR6);
*(((uint8_t *)& addr) + 2) = get_short_add_mem(MRF24J40_EADR5);
*(((uint8_t *)& addr) + 3) = get_short_add_mem(MRF24J40_EADR4);
*(((uint8_t *)& addr) + 4) = get_short_add_mem(MRF24J40_EADR3);
*(((uint8_t *)& addr) + 5) = get_short_add_mem(MRF24J40_EADR2);
*(((uint8_t *)& addr) + 6) = get_short_add_mem(MRF24J40_EADR1);
*(((uint8_t *)& addr) + 7) = get_short_add_mem(MRF24J40_EADR0);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Set TX power
*
* This routine sets the transmission power of the MRF24J40.
*/
void
mrf24j40_set_tx_power(uint8_t pwr)
{
set_long_add_mem(MRF24J40_RFCON3, pwr);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get radio status
*
* This routine returns the MRF24J40 status.
*/
uint8_t
mrf24j40_get_status(void)
{
return get_long_add_mem(MRF24J40_RFSTATE);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get the RSSI
*
* This routine returns the rssi value mesured in dbm
* Note: to convert the returned value to dBm, use the table 3-8 available
* in the MRF24J40 datasheet.
*/
uint8_t
mrf24j40_get_rssi(void)
{
/*
* 3.6.1 RSSI FIRMWARE REQUEST (RSSI MODE1)
* In this mode, the host microcontroller sends a request
* to calculate RSSI, then waits until it is done and then
* reads the RSSI value. The steps are:
*
* 1.
* Set RSSIMODE1 0x3E<7> Initiate RSSI
* calculation.
*
* 2.
* Wait until RSSIRDY 0x3E<0> is set to 1 RSSI
* calculation is complete.
*
* 3.
* Read RSSI 0x210<7:0> The RSSI register
* contains the averaged RSSI received power
* level for 8 symbol periods.
*/
/* Initiate RSSI calculation */
set_short_add_mem(MRF24J40_BBREG6, get_short_add_mem(MRF24J40_BBREG6) | 0b10000000);
/* Wait until RSSI calculation is done */
while(!(get_short_add_mem(MRF24J40_BBREG6) & 0b00000001)) {
;
}
mrf24j40_last_rssi = get_long_add_mem(MRF24J40_RSSI);
return mrf24j40_last_rssi;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get the last read RSSI
*
* This routine returns the last rssi value mesured in dbm
* Note: to convert the returned value to dBm, use the table 3-8 available
* in the MRF24J40 datasheet.
*/
uint8_t
mrf24j40_get_last_rssi(void)
{
return mrf24j40_last_rssi;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get the last read LQI
*
* This routine returns the last lqi
*/
uint8_t
mrf24j40_get_last_lqi(void)
{
return mrf24j40_last_lqi;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Store message
*
* This routine stores a buffer of buf_len bytes in the TX_FIFO
* buffer of the MRF24J40.
*/
int32_t
mrf24j40_set_txfifo(const uint8_t *buf, uint8_t buf_len)
{
uint8_t i;
if((buf_len == 0) || (buf_len > 128)) {
return -1;
}
set_long_add_mem(MRF24J40_NORMAL_TX_FIFO, 0);
set_long_add_mem(MRF24J40_NORMAL_TX_FIFO + 1, buf_len);
for(i = 0; i < buf_len; ++i) {
set_long_add_mem(MRF24J40_NORMAL_TX_FIFO + 2 + i, buf[i]);
}
return 0;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Get message
*
* This routine is used to retrieve a message stored in the RX_FIFO
*/
int32_t
mrf24j40_get_rxfifo(uint8_t *buf, uint8_t buf_len)
{
uint8_t i, len;
MRF24J40_INTERRUPT_ENABLE_CLR();
/* Disable packet reception */
set_short_add_mem(MRF24J40_BBREG1, 0b00000100);
/* Get packet length discarding 2 bytes (LQI, RSSI) */
len = get_long_add_mem(MRF24J40_RX_FIFO) - 2;
if(len <= buf_len) {
/* Get the packet */
for(i = 0; i < len; ++i) {
buf[i] = get_long_add_mem(MRF24J40_RX_FIFO + i + 1);
}
/*
* packet len includes = header + paylod + LQI + RSSI
*/
#ifdef ADD_RSSI_AND_LQI_TO_PACKET
mrf24j40_last_lqi = get_long_add_mem(MRF24J40_RX_FIFO + len + 3);
mrf24j40_last_rssi = get_long_add_mem(MRF24J40_RX_FIFO + len + 4);
#endif
} else {
len = 0;
}
/* Enable packet reception */
set_short_add_mem(MRF24J40_BBREG1, 0b00000000);
pending = 0;
#ifdef MRF24J40_PROMISCUOUS_MODE
/*
* Flush RX FIFO as suggested by the work around 1 in
* MRF24J40 Silicon Errata.
*/
flush_rx_fifo();
#endif
MRF24J40_INTERRUPT_ENABLE_SET();
return len == 0 ? -1 : len;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Start sleep
*
* This routine puts the radio in sleep mode.
*/
static void
put_to_sleep(void)
{
/* Prepare WAKE pin: */
MRF24J40_WAKE = 0;
/* Enable Immediate Wake-up mode */
set_short_add_mem(MRF24J40_WAKECON, 0b10000000);
set_short_add_mem(MRF24J40_SOFTRST, 0b00000100);
set_short_add_mem(MRF24J40_RXFLUSH, 0b01100000);
/* Put to sleep */
set_short_add_mem(MRF24J40_SLPACK, 0b10000000);
}
/*---------------------------------------------------------------------------*/
/**
* \brief Awake the radio
*
* This routine turns on and sets the radio on receiving mode.
* Note: After performing this routine the radio is in the receiving state.
*/
static void
wake(void)
{
/* Wake-up */
MRF24J40_WAKE = 1;
/* RF State Machine reset */
set_short_add_mem(MRF24J40_RFCTL, 0b00000100);
set_short_add_mem(MRF24J40_RFCTL, 0b00000000);
clock_delay_usec(2500);
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_on(void)
{
if(!receive_on) {
wake();
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
receive_on = 1;
}
return 1;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_off(void)
{
if(receive_on) {
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
receive_on = 0;
put_to_sleep();
}
return 1;
}
/*---------------------------------------------------------------------------*/
/**
* \brief Init transceiver
*
* This routine initializes the radio transceiver
*/
int
mrf24j40_init(void)
{
uint8_t i;
/* Set the IO pins direction */
MRF24J40_PINDIRECTION_INIT();
/* Set interrupt registers and reset flags */
MRF24J40_INTERRUPT_INIT(6, 3);
if(MRF24J40_SPI_PORT_INIT(10000000, SPI_DEFAULT) < 0)
return -1;
PRINTF("MRF24J40 Initialization started\n");
MRF24J40_HARDRESET_LOW();
clock_delay_usec(2500);
MRF24J40_HARDRESET_HIGH();
clock_delay_usec(2500);
/*
* bit 7:3 reserved: Maintain as 0
* bit 2 RSTPWR: Power Management Reset bit
* 1 = Reset power management circuitry (bit is automatically cleared to 0 by hardware)
* bit 1 RSTBB: Baseband Reset bit
* 1 = Reset baseband circuitry (bit is automatically cleared to 0 by hardware)
* bit 0 RSTMAC: MAC Reset bit
* 1 = Reset MAC circuitry (bit is automatically cleared to 0 by hardware)
*/
set_short_add_mem(MRF24J40_SOFTRST, 0b00000111);
/*
* wait until the radio reset is completed
*/
do {
i = get_short_add_mem(MRF24J40_SOFTRST);
} while((i & 0b0000111) != 0);
clock_delay_usec(2500);
/*
* bit 7 FIFOEN: FIFO Enable bit 1 = Enabled (default). Always maintain this bit as a 1.
* bit 6 reserved: Maintain as 0
* bit 5:2 TXONTS<3:0>: Transmitter Enable On Time Symbol bits(1)
* Transmitter on time before beginning of packet. Units: symbol period (16 μs).
* Minimum value: 0x1. Default value: 0x2 (2 * 16 μs = 32 μs). Recommended value: 0x6 (6 * 16 μs = 96 μs).
* bit 1:0 TXONT<8:7>: Transmitter Enable On Time Tick bits(1)
* Transmitter on time before beginning of packet. TXONT is a 9-bit value. TXONT<6:0> bits are located
* in SYMTICKH<7:1>. Units: tick (50 ns). Default value = 0x028 (40 * 50 ns = 2 μs).
*/
set_short_add_mem(MRF24J40_PACON2, 0b10011000);
mrf24j40_set_channel(MRF24J40_DEFAULT_CHANNEL);
set_long_add_mem(MRF24J40_RFCON1, 0b00000010); /* program the RF and Baseband Register */
/* as suggested by the datasheet */
set_long_add_mem(MRF24J40_RFCON2, 0b10000000); /* enable PLL */
mrf24j40_set_tx_power(0b00000000); /* set power 0dBm (plus 20db power amplifier 20dBm)*/
/*
* Set up
*
* bit 7 '1' as suggested by the datasheet
* bit 6:5 '00' reserved
* bit 4 '1' recovery from sleep 1 usec
* bit 3 '0' battery monitor disabled
* bit 2:0 '000' reserved
*/
set_long_add_mem(MRF24J40_RFCON6, 0b10010000);
set_long_add_mem(MRF24J40_RFCON7, 0b10000000); /* Sleep clock = 100kHz */
set_long_add_mem(MRF24J40_RFCON8, 0b00000010); /* as suggested by the datasheet */
set_long_add_mem(MRF24J40_SLPCON1, 0b00100001); /* as suggested by the datasheet */
/* Program CCA, RSSI threshold values */
set_short_add_mem(MRF24J40_BBREG2, 0b01111000); /* Recommended value by the datashet */
set_short_add_mem(MRF24J40_CCAEDTH, 0b01100000); /* Recommended value by the datashet */
#ifdef MRF24J40MB
/* Activate the external amplifier needed by the MRF24J40MB */
set_long_add_mem(MRF24J40_TESTMODE, 0b0001111);
PRINTF("MRF24J40 Init Amplifier activated \n");
#endif
#ifdef ADD_RSSI_AND_LQI_TO_PACKET
/* Enable the packet RSSI */
set_short_add_mem(MRF24J40_BBREG6, 0b01000000);
PRINTF("MRF24J40 Init append RSSI and LQI to packet\n");
#endif
/*
* Wait until the radio state machine is not on rx mode
*/
do {
i = get_long_add_mem(MRF24J40_RFSTATE);
} while((i & 0xA0) != 0xA0);
i = 0;
#ifdef MRF24J40_DISABLE_AUTOMATIC_ACK
i = i | 0b00100000;
PRINTF("MRF24J40 Init NO_AUTO_ACK\n");
#endif
#ifdef MRF24J40_PAN_COORDINATOR
i = i | 0b00001000;
PRINTF("MRF24J40 Init PAN COORD\n");
set_short_add_mem(MRF24J40_ORDER, 0b11111111);
#endif
#ifdef MRF24J40_COORDINATOR
i = i | 0b00000100;
PRINTF("MRF24J40 Init COORD\n");
#endif
#ifdef MRF24J40_ACCEPT_WRONG_CRC_PKT
i = i | 0b00000010;
PRINTF("MRF24J40 Init Accept Wrong CRC\n");
#endif
#ifdef MRF24J40_PROMISCUOUS_MODE
i = i | 0b00000001;
PRINTF("MRF24J40 Init PROMISCUOUS MODE\n");
#endif
/*
* Set the RXMCR register.
* Default setting i = 0x00, which means:
* - Automatic ACK;
* - Device is not a PAN coordinator;
* - Device is not a coordinator;
* - Accept only packets with good CRC
* - Discard packet when there is a MAC address mismatch,
* illegal frame type, dPAN/sPAN or MAC short address mismatch.
*/
set_short_add_mem(MRF24J40_RXMCR, i);
PRINTF("RXMCR 0x%X\n", i);
/*
* Set the TXMCR register.
* bit 7 '0' Enable No Carrier Sense Multiple Access (CSMA) Algorithm.
* bit 6 '0' Disable Battery Life Extension Mode bit.
* bit 5 '0' Disable Slotted CSMA-CA Mode bit.
* bit 4:3 '11' MAC Minimum Backoff Exponent bits (macMinBE).
* bit 2:0 '100' CSMA Backoff bits (macMaxCSMABackoff)
*/
set_short_add_mem(MRF24J40_TXMCR, 0b00011100);
i = get_short_add_mem(MRF24J40_TXMCR);
PRINTF("TXMCR 0x%X\n", i);
/*
* Set TX turn around time as defined by IEEE802.15.4 standard
*/
set_short_add_mem(MRF24J40_TXSTBL, 0b10010101);
set_short_add_mem(MRF24J40_TXTIME, 0b00110000);
#ifdef INT_POLARITY_HIGH
/* Set interrupt edge polarity high */
set_long_add_mem(MRF24J40_SLPCON0, 0b00000011);
PRINTF("MRF24J40 Init INT Polarity High\n");
#else
set_long_add_mem(MRF24J40_SLPCON0, 0b00000001);
PRINTF("MRF24J40 Init INT Polarity Low\n");
#endif
PRINTF("MRF24J40 Inititialization completed\n");
mrf24j40_last_lqi = 0;
mrf24j40_last_rssi = 0;
status_tx = MRF24J40_TX_ERR_NONE;
pending = 0;
receive_on = 1;
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
reset_rf_state_machine();
/* Flush RX FIFO */
flush_rx_fifo();
process_start(&mrf24j40_process, NULL);
/*
*
* Setup interrupts.
*
* set INTCON
* bit 7 '1' Disables the sleep alert interrupt
* bit 6 '1' Disables the wake-up alert interrupt
* bit 5 '1' Disables the half symbol timer interrupt
* bit 4 '1' Disables the security key request interrupt
* bit 3 '0' Enables the RX FIFO reception interrupt
* bit 2 '1' Disables the TX GTS2 FIFO transmission interrupt
* bit 1 '1' Disables the TX GTS1 FIFO transmission interrupt
* bit 0 '0' Enables the TX Normal FIFO transmission interrupt
*/
set_short_add_mem(MRF24J40_INTCON, 0b11110110);
return 0;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_prepare(const void *data, unsigned short len)
{
PRINTF("PREPARE %u bytes\n", len);
uint8_t receive_was_on = receive_on;
mrf24j40_on();
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
mrf24j40_set_txfifo(data, len);
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
if(!receive_was_on) {
mrf24j40_off();
} else {
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
}
return 0;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_transmit(unsigned short len)
{
PRINTF("TRANSMIT %u bytes\n", len);
uint8_t receive_was_on = receive_on;
mrf24j40_on();
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
status_tx = MRF24J40_TX_WAIT;
set_short_add_mem(MRF24J40_TXNCON, 0b00000001);
/* Wait until the transmission has finished. */
while(status_tx == MRF24J40_TX_WAIT) {
;
}
ENERGEST_OFF(ENERGEST_TYPE_TRANSMIT);
if(!receive_was_on) {
mrf24j40_off();
} else {
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
}
switch(status_tx) {
case MRF24J40_TX_ERR_NONE:
return RADIO_TX_OK;
case MRF24J40_TX_ERR_COLLISION:
return RADIO_TX_COLLISION;
case MRF24J40_TX_ERR_MAXRETRY:
return RADIO_TX_NOACK;
default:
return RADIO_TX_ERR;
}
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_write(const void *data, uint16_t len)
{
int ret = -1;
PRINTF("PREPARE & TRANSMIT %u bytes\n", len);
if(mrf24j40_prepare(data, len))
return ret;
ret = mrf24j40_transmit(len);
return ret;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_read(void *data, uint16_t len)
{
return mrf24j40_get_rxfifo(data, len);
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_cca(void)
{
uint8_t ret;
uint8_t receive_was_on = receive_on;
mrf24j40_on();
ENERGEST_OFF(ENERGEST_TYPE_LISTEN);
ENERGEST_ON(ENERGEST_TYPE_TRANSMIT);
ret = mrf24j40_get_rssi() <= 95; /* -69dbm */
if(!receive_was_on) {
mrf24j40_off();
} else {
ENERGEST_ON(ENERGEST_TYPE_LISTEN);
}
return ret;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_receiving_packet(void)
{
return 0;
}
/*---------------------------------------------------------------------------*/
int
mrf24j40_pending_packet(void)
{
return pending;
}
/*---------------------------------------------------------------------------*/
MRF24J40_ISR()
{
INT_status int_status;
TX_status tx_status;
ENERGEST_ON(ENERGEST_TYPE_IRQ);
int_status.val = get_short_add_mem(MRF24J40_INTSTAT);
if(!int_status.val) {
return;
}
if(int_status.bits.RXIF) {
pending = 1;
process_poll(&mrf24j40_process);
}
if(int_status.bits.TXNIF) {
tx_status.val = get_short_add_mem(MRF24J40_TXSTAT);
if(tx_status.bits.TXNSTAT) {
if(tx_status.bits.CCAFAIL) {
status_tx = MRF24J40_TX_ERR_COLLISION;
} else {
status_tx = MRF24J40_TX_ERR_MAXRETRY;
}
} else {
status_tx = MRF24J40_TX_ERR_NONE;
}
}
MRF24J40_INTERRUPT_FLAG_CLR();
ENERGEST_OFF(ENERGEST_TYPE_IRQ);
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(mrf24j40_process, ev, data)
{
PROCESS_BEGIN();
uint8_t ret;
while(1) {
PROCESS_YIELD_UNTIL(ev == PROCESS_EVENT_POLL);
if(!pending) {
continue;
}
packetbuf_clear();
ret = mrf24j40_read(packetbuf_dataptr(), PACKETBUF_SIZE);
packetbuf_set_datalen(ret);
#ifdef ADD_RSSI_AND_LQI_TO_PACKET
packetbuf_set_attr(PACKETBUF_ATTR_RSSI, mrf24j40_last_rssi);
packetbuf_set_attr(PACKETBUF_ATTR_LINK_QUALITY, mrf24j40_last_lqi);
#endif
NETSTACK_RDC.input();
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
static radio_result_t
get_value(radio_param_t param, radio_value_t *value)
{
return RADIO_RESULT_NOT_SUPPORTED;
}
/*---------------------------------------------------------------------------*/
static radio_result_t
set_value(radio_param_t param, radio_value_t value)
{
return RADIO_RESULT_NOT_SUPPORTED;
}
/*---------------------------------------------------------------------------*/
static radio_result_t
get_object(radio_param_t param, void *dest, size_t size)
{
return RADIO_RESULT_NOT_SUPPORTED;
}
/*---------------------------------------------------------------------------*/
static radio_result_t
set_object(radio_param_t param, const void *src, size_t size)
{
return RADIO_RESULT_NOT_SUPPORTED;
}
/*---------------------------------------------------------------------------*/
const struct radio_driver mrf24j40_driver = {
mrf24j40_init,
mrf24j40_prepare,
mrf24j40_transmit,
mrf24j40_write,
mrf24j40_read,
mrf24j40_cca,
mrf24j40_receiving_packet,
mrf24j40_pending_packet,
mrf24j40_on,
mrf24j40_off,
get_value,
set_value,
get_object,
set_object
};
/*---------------------------------------------------------------------------*/
/** @} */