contiki/examples/ipv6/sky-websense
2010-06-08 22:39:30 +00:00
..
example-sky-websense.csc Added example COOJA simulation 2010-05-09 14:31:33 +00:00
Makefile Added example using HTTP to control and be controlled. 2010-06-08 22:39:30 +00:00
Makefile.target Web server example showing light and temperature sensor data 2010-05-09 12:56:48 +00:00
project-rpl-web-conf.h Web server example showing light and temperature sensor data 2010-05-09 12:56:48 +00:00
README Added documentation 2010-05-09 15:57:34 +00:00
sky-websense.c minor cleanup 2010-06-08 13:27:06 +00:00
websense-remote.c Added example using HTTP to control and be controlled. 2010-06-08 22:39:30 +00:00
wget.c Added example using HTTP to control and be controlled. 2010-06-08 22:39:30 +00:00
wget.h Added example using HTTP to control and be controlled. 2010-06-08 22:39:30 +00:00

This example features a simple webserver running on top of the IPv6
contiki stack on Sky motes to provide sensor values, and with a RPL
border router to bridge the sensor network to Internet.


To test the example in COOJA under Linux
----------------------------------------

1. Start COOJA and load the simulation "example-sky-websense.csc"
> make TARGET=cooja example-sky-websense.csc

2. Connect to the COOJA simulation using tunslip6:
> make connect-router-cooja

3. You should now be able to browse to the nodes using your web browser:
   Router: http://[aaaa::0212:7401:0001:0101]/
   Node 2: http://[aaaa::0212:7402:0002:0202]/


To run the example on real nodes under Linux
--------------------------------------------

1. Program the nodes with the websense application
> make TARGET=sky sky-websense.upload

2. Disconnect the nodes and program one node with the RPL border router
> (cd ../rpl-border-router && make TARGET=sky border-router.upload)

3. Connect to the border router using tunslip6:
> make connect-router

4. Reboot the router and note the router IP address

5. You should now be able to browse to your router node using your web
   browser: http://[<ROUTER IPv6 ADDRESS>]/. On this page you should
   see a list of all accessible nodes with their IP adresses.