mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-19 03:05:14 +00:00
35 lines
1.6 KiB
Plaintext
35 lines
1.6 KiB
Plaintext
This example features a simple webserver running on top of the IPv6
|
|
contiki stack.
|
|
|
|
For this example to run properly the UIP_CONF_TCP compilation flag
|
|
must be set to 1 in the contiki-conf.h file of the platform.
|
|
|
|
If you are using the minimal-net platform on linux you can test the
|
|
code as follows:
|
|
- First do 'ifconfig tap0 inet6 3ffe:0501:ffff:0100:0206:98ff:fe00:0231'
|
|
or 'ip -6 address add 3ffe:0501:ffff:0100:0206:98ff:fe00:0231' dev tap0.
|
|
- You might need to add a route 'ip -6 route add
|
|
aaaa:0000:0000:0000:0206:98ff:fe00:0232/64 dev tap0'
|
|
- Then configure a global address by sending a router advertisement (RA)
|
|
with a prefix option. You can use radvd for example to generate such a
|
|
packet.
|
|
Assume the prefix in the RA is:
|
|
3ffe:0501:ffff:0100:0000:0000:0000:0000/64.
|
|
and that the resulting address created by the contiki stack is:
|
|
3ffe:0501:ffff:0100:0206:98ff:fe00:0232
|
|
- Finally you can use 'wget http://[3ffe:0501:ffff:0100:0206:98ff:fe00:0232]'
|
|
to get the web page (index.html file)
|
|
|
|
Two alternate servers Huginn and Muninn are included in this directory.
|
|
Use e.g. $make WEBDIR=Huginn to generate a webserver6-huginn.elf file.
|
|
The ipv6 address suffix and server names are specified in the makefsdata.h file.
|
|
|
|
$make COFFEE_FILES=1 or 3 uses a static coffee file system in eeprom or program
|
|
flash memory. Files can not be created, but existing files can be rewritten
|
|
using http POST via upload.html. When switching coffee types a $make clean
|
|
should be done to ensure all c source is on the same page (ahem).
|
|
-->This is under development and rewrites are not working yet.
|
|
|
|
Future plans are for $make COFFEE_FILES=2 or 4 for a full coffee file system.
|
|
|