mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-19 03:05:14 +00:00
872 lines
52 KiB
C
872 lines
52 KiB
C
/*
|
|
* Original file:
|
|
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
|
|
* All rights reserved.
|
|
*
|
|
* Port to Contiki:
|
|
* Copyright (c) 2014 Andreas Dröscher <contiki@anticat.ch>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/**
|
|
* \addtogroup cc2538
|
|
* @{
|
|
*
|
|
* \defgroup cc2538-pka cc2538 PKA engine
|
|
*
|
|
* Driver for the cc2538 PKA engine
|
|
* @{
|
|
*
|
|
* \file
|
|
* Header file for the cc2538 PKA engine driver
|
|
*/
|
|
#ifndef PKA_H_
|
|
#define PKA_H_
|
|
|
|
#include "contiki.h"
|
|
#include <stdint.h>
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA memory
|
|
* @{
|
|
*/
|
|
#define PKA_RAM_BASE 0x44006000 /**< PKA Memory Address */
|
|
#define PKA_RAM_SIZE 0x800 /**< PKA Memory Size */
|
|
#define PKA_MAX_CURVE_SIZE 12 /**< Define for the maximum curve
|
|
size supported by the PKA module
|
|
in 32 bit word. */
|
|
#define PKA_MAX_LEN 12 /**< Define for the maximum length of
|
|
the big number supported by the
|
|
PKA module in 32 bit word. */
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA register offsets
|
|
* @{
|
|
*/
|
|
#define PKA_APTR 0x44004000 /**< PKA vector A address During
|
|
execution of basic PKCP
|
|
operations, this register is
|
|
double buffered and can be
|
|
written with a new value for the
|
|
next operation; when not
|
|
written, the value remains
|
|
intact. During the execution of
|
|
sequencer-controlled complex
|
|
operations, this register may
|
|
not be written and its value is
|
|
undefined at the conclusion of
|
|
the operation. The driver
|
|
software cannot rely on the
|
|
written value to remain intact. */
|
|
#define PKA_BPTR 0x44004004 /**< PKA vector B address During
|
|
execution of basic PKCP
|
|
operations, this register is
|
|
double buffered and can be
|
|
written with a new value for the
|
|
next operation; when not
|
|
written, the value remains
|
|
intact. During the execution of
|
|
sequencer-controlled complex
|
|
operations, this register may
|
|
not be written and its value is
|
|
undefined at the conclusion of
|
|
the operation. The driver
|
|
software cannot rely on the
|
|
written value to remain intact. */
|
|
#define PKA_CPTR 0x44004008 /**< PKA vector C address During
|
|
execution of basic PKCP
|
|
operations, this register is
|
|
double buffered and can be
|
|
written with a new value for the
|
|
next operation; when not
|
|
written, the value remains
|
|
intact. During the execution of
|
|
sequencer-controlled complex
|
|
operations, this register may
|
|
not be written and its value is
|
|
undefined at the conclusion of
|
|
the operation. The driver
|
|
software cannot rely on the
|
|
written value to remain intact. */
|
|
#define PKA_DPTR 0x4400400C /**< PKA vector D address During
|
|
execution of basic PKCP
|
|
operations, this register is
|
|
double buffered and can be
|
|
written with a new value for the
|
|
next operation; when not
|
|
written, the value remains
|
|
intact. During the execution of
|
|
sequencer-controlled complex
|
|
operations, this register may
|
|
not be written and its value is
|
|
undefined at the conclusion of
|
|
the operation. The driver
|
|
software cannot rely on the
|
|
written value to remain intact. */
|
|
#define PKA_ALENGTH 0x44004010 /**< PKA vector A length During
|
|
execution of basic PKCP
|
|
operations, this register is
|
|
double buffered and can be
|
|
written with a new value for the
|
|
next operation; when not
|
|
written, the value remains
|
|
intact. During the execution of
|
|
sequencer-controlled complex
|
|
operations, this register may
|
|
not be written and its value is
|
|
undefined at the conclusion of
|
|
the operation. The driver
|
|
software cannot rely on the
|
|
written value to remain intact. */
|
|
#define PKA_BLENGTH 0x44004014 /**< PKA vector B length During
|
|
execution of basic PKCP
|
|
operations, this register is
|
|
double buffered and can be
|
|
written with a new value for the
|
|
next operation; when not
|
|
written, the value remains
|
|
intact. During the execution of
|
|
sequencer-controlled complex
|
|
operations, this register may
|
|
not be written and its value is
|
|
undefined at the conclusion of
|
|
the operation. The driver
|
|
software cannot rely on the
|
|
written value to remain intact. */
|
|
#define PKA_SHIFT 0x44004018 /**< PKA bit shift value For basic
|
|
PKCP operations, modifying the
|
|
contents of this register is
|
|
made impossible while the
|
|
operation is being performed.
|
|
For the ExpMod-variable and
|
|
ExpMod-CRT operations, this
|
|
register is used to indicate the
|
|
number of odd powers to use
|
|
(directly as a value in the
|
|
range 1-16). For the ModInv and
|
|
ECC operations, this register is
|
|
used to hold a completion code. */
|
|
#define PKA_FUNCTION 0x4400401C /**< PKA function This register
|
|
contains the control bits to
|
|
start basic PKCP as well as
|
|
complex sequencer operations.
|
|
The run bit can be used to poll
|
|
for the completion of the
|
|
operation. Modifying bits [11:0]
|
|
is made impossible during the
|
|
execution of a basic PKCP
|
|
operation. During the execution
|
|
of sequencer-controlled complex
|
|
operations, this register is
|
|
modified; the run and stall
|
|
result bits are set to zero at
|
|
the conclusion, but other bits
|
|
are undefined. Attention:
|
|
Continuously reading this
|
|
register to poll the run bit is
|
|
not allowed when executing
|
|
complex sequencer operations
|
|
(the sequencer cannot access the
|
|
PKCP when this is done). Leave
|
|
at least one sysclk cycle
|
|
between poll operations. */
|
|
#define PKA_COMPARE 0x44004020 /**< PKA compare result This
|
|
register provides the result of
|
|
a basic PKCP compare operation.
|
|
It is updated when the run bit
|
|
in the PKA_FUNCTION register is
|
|
reset at the end of that
|
|
operation. Status after a
|
|
complex sequencer operation is
|
|
unknown */
|
|
#define PKA_MSW 0x44004024 /**< PKA most-significant-word of
|
|
result vector This register
|
|
indicates the (word) address in
|
|
the PKA RAM where the most
|
|
significant nonzero 32-bit word
|
|
of the result is stored. Should
|
|
be ignored for modulo
|
|
operations. For basic PKCP
|
|
operations, this register is
|
|
updated when the run bit in the
|
|
PKA_FUNCTION register is reset
|
|
at the end of the operation. For
|
|
the complex-sequencer controlled
|
|
operations, updating of the
|
|
final value matching the actual
|
|
result is done near the end of
|
|
the operation; note that the
|
|
result is only meaningful if no
|
|
errors were detected and that
|
|
for ECC operations, the PKA_MSW
|
|
register will provide
|
|
information for the x-coordinate
|
|
of the result point only. */
|
|
#define PKA_DIVMSW 0x44004028 /**< PKA most-significant-word of
|
|
divide remainder This register
|
|
indicates the (32-bit word)
|
|
address in the PKA RAM where the
|
|
most significant nonzero 32-bit
|
|
word of the remainder result for
|
|
the basic divide and modulo
|
|
operations is stored. Bits [4:0]
|
|
are loaded with the bit number
|
|
of the most-significant nonzero
|
|
bit in the most-significant
|
|
nonzero word when MS one control
|
|
bit is set. For divide, modulo,
|
|
and MS one reporting, this
|
|
register is updated when the RUN
|
|
bit in the PKA_FUNCTION register
|
|
is reset at the end of the
|
|
operation. For the complex
|
|
sequencer controlled operations,
|
|
updating of bits [4:0] of this
|
|
register with the
|
|
most-significant bit location of
|
|
the actual result is done near
|
|
the end of the operation. The
|
|
result is meaningful only if no
|
|
errors were detected and that
|
|
for ECC operations; the
|
|
PKA_DIVMSW register provides
|
|
information for the x-coordinate
|
|
of the result point only. */
|
|
#define PKA_SEQ_CTRL 0x440040C8 /**< PKA sequencer control and
|
|
status register The sequencer is
|
|
interfaced with the outside
|
|
world through a single control
|
|
and status register. With the
|
|
exception of bit [31], the
|
|
actual use of bits in the
|
|
separate sub-fields of this
|
|
register is determined by the
|
|
sequencer firmware. This
|
|
register need only be accessed
|
|
when the sequencer program is
|
|
stored in RAM. The reset value
|
|
of the RESTE bit depends upon
|
|
the option chosen for sequencer
|
|
program storage. */
|
|
#define PKA_OPTIONS 0x440040F4 /**< PKA hardware options register
|
|
This register provides the host
|
|
with a means to determine the
|
|
hardware configuration
|
|
implemented in this PKA engine,
|
|
focused on options that have an
|
|
effect on software interacting
|
|
with the module. Note: (32 x
|
|
(1st LNME nr. of PEs + 1st LNME
|
|
FIFO RAM depth - 10)) equals the
|
|
maximum modulus vector length
|
|
(in bits) that can be handled by
|
|
the modular exponentiation and
|
|
ECC operations executed on a PKA
|
|
engine that includes an LNME. */
|
|
#define PKA_SW_REV 0x440040F8 /**< PKA firmware revision and
|
|
capabilities register This
|
|
register allows the host access
|
|
to the internal firmware
|
|
revision number of the PKA
|
|
Engine for software driver
|
|
matching and diagnostic
|
|
purposes. This register also
|
|
contains a field that encodes
|
|
the capabilities of the embedded
|
|
firmware. The PKA_SW_REV
|
|
register is written by the
|
|
firmware within a few clock
|
|
cycles after starting up that
|
|
firmware. The hardware reset
|
|
value is zero, indicating that
|
|
the information has not been
|
|
written yet. */
|
|
#define PKA_REVISION 0x440040FC /**< PKA hardware revision register
|
|
This register allows the host
|
|
access to the hardware revision
|
|
number of the PKA engine for
|
|
software driver matching and
|
|
diagnostic purposes. It is
|
|
always located at the highest
|
|
address in the access space of
|
|
the module and contains an
|
|
encoding of the EIP number (with
|
|
its complement as signature) for
|
|
recognition of the hardware
|
|
module. */
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_APTR register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_APTR_APTR_M 0x000007FF /**< This register specifies the
|
|
location of vector A within the
|
|
PKA RAM. Vectors are identified
|
|
through the location of their
|
|
least-significant 32-bit word.
|
|
Note that bit [0] must be zero
|
|
to ensure that the vector starts
|
|
at an 8-byte boundary. */
|
|
#define PKA_APTR_APTR_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_BPTR register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_BPTR_BPTR_M 0x000007FF /**< This register specifies the
|
|
location of vector B within the
|
|
PKA RAM. Vectors are identified
|
|
through the location of their
|
|
least-significant 32-bit word.
|
|
Note that bit [0] must be zero
|
|
to ensure that the vector starts
|
|
at an 8-byte boundary. */
|
|
#define PKA_BPTR_BPTR_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_CPTR register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_CPTR_CPTR_M 0x000007FF /**< This register specifies the
|
|
location of vector C within the
|
|
PKA RAM. Vectors are identified
|
|
through the location of their
|
|
least-significant 32-bit word.
|
|
Note that bit [0] must be zero
|
|
to ensure that the vector starts
|
|
at an 8-byte boundary. */
|
|
#define PKA_CPTR_CPTR_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_DPTR register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_DPTR_DPTR_M 0x000007FF /**< This register specifies the
|
|
location of vector D within the
|
|
PKA RAM. Vectors are identified
|
|
through the location of their
|
|
least-significant 32-bit word.
|
|
Note that bit [0] must be zero
|
|
to ensure that the vector starts
|
|
at an 8-byte boundary. */
|
|
#define PKA_DPTR_DPTR_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_ALENGTH register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_ALENGTH_ALENGTH_M 0x000001FF /**< This register specifies the
|
|
length (in 32-bit words) of
|
|
Vector A. */
|
|
#define PKA_ALENGTH_ALENGTH_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_BLENGTH register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_BLENGTH_BLENGTH_M 0x000001FF /**< This register specifies the
|
|
length (in 32-bit words) of
|
|
Vector B. */
|
|
#define PKA_BLENGTH_BLENGTH_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_SHIFT register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_SHIFT_NUM_BITS_TO_SHIFT_M \
|
|
0x0000001F /**< This register specifies the
|
|
number of bits to shift the
|
|
input vector (in the range 0-31)
|
|
during a Rshift or Lshift
|
|
operation. */
|
|
|
|
#define PKA_SHIFT_NUM_BITS_TO_SHIFT_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_FUNCTION register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_FUNCTION_STALL_RESULT \
|
|
0x01000000 /**< When written with a 1b,
|
|
updating of the PKA_COMPARE,
|
|
PKA_MSW and PKA_DIVMSW
|
|
registers, as well as resetting
|
|
the run bit is stalled beyond
|
|
the point that a running
|
|
operation is actually finished.
|
|
Use this to allow software
|
|
enough time to read results from
|
|
a previous operation when the
|
|
newly started operation is known
|
|
to take only a short amount of
|
|
time. If a result is waiting,
|
|
the result registers is updated
|
|
and the run bit is reset in the
|
|
clock cycle following writing
|
|
the stall result bit back to 0b.
|
|
The Stall result function may
|
|
only be used for basic PKCP
|
|
operations. */
|
|
|
|
#define PKA_FUNCTION_STALL_RESULT_M \
|
|
0x01000000
|
|
#define PKA_FUNCTION_STALL_RESULT_S 24
|
|
#define PKA_FUNCTION_RUN 0x00008000 /**< The host sets this bit to
|
|
instruct the PKA module to begin
|
|
processing the basic PKCP or
|
|
complex sequencer operation.
|
|
This bit is reset low
|
|
automatically when the operation
|
|
is complete. The complement of
|
|
this bit is output as
|
|
interrupts[1]. After a reset,
|
|
the run bit is always set to 1b.
|
|
Depending on the option, program
|
|
ROM or program RAM, the
|
|
following applies: Program ROM -
|
|
The first sequencer instruction
|
|
sets the bit to 0b. This is done
|
|
immediately after the hardware
|
|
reset is released. Program RAM -
|
|
The sequencer must set the bit
|
|
to 0b. As a valid firmware may
|
|
not have been loaded, the
|
|
sequencer is held in software
|
|
reset after the hardware reset
|
|
is released (the reset bit in
|
|
PKA_SEQ_CRTL is set to 1b).
|
|
After the FW image is loaded and
|
|
the Reset bit is cleared, the
|
|
sequencer starts to execute the
|
|
FW. The first instruction clears
|
|
the run bit. In both cases a few
|
|
clock cycles are needed before
|
|
the first instruction is
|
|
executed and the run bit state
|
|
has been propagated. */
|
|
#define PKA_FUNCTION_RUN_M 0x00008000
|
|
#define PKA_FUNCTION_RUN_S 15
|
|
#define PKA_FUNCTION_SEQUENCER_OPERATIONS_M \
|
|
0x00007000 /**< These bits select the complex
|
|
sequencer operation to perform:
|
|
000b: None 001b: ExpMod-CRT
|
|
010b: ExpMod-ACT4 (compatible
|
|
with EIP2315) 011b: ECC-ADD (if
|
|
available in firmware, otherwise
|
|
reserved) 100b: ExpMod-ACT2
|
|
(compatible with EIP2316) 101b:
|
|
ECC-MUL (if available in
|
|
firmware, otherwise reserved)
|
|
110b: ExpMod-variable 111b:
|
|
ModInv (if available in
|
|
firmware, otherwise reserved)
|
|
The encoding of these operations
|
|
is determined by sequencer
|
|
firmware. */
|
|
|
|
#define PKA_FUNCTION_SEQUENCER_OPERATIONS_S 12
|
|
#define PKA_FUNCTION_COPY 0x00000800 /**< Perform copy operation */
|
|
#define PKA_FUNCTION_COPY_M 0x00000800
|
|
#define PKA_FUNCTION_COPY_S 11
|
|
#define PKA_FUNCTION_COMPARE 0x00000400 /**< Perform compare operation */
|
|
#define PKA_FUNCTION_COMPARE_M 0x00000400
|
|
#define PKA_FUNCTION_COMPARE_S 10
|
|
#define PKA_FUNCTION_MODULO 0x00000200 /**< Perform modulo operation */
|
|
#define PKA_FUNCTION_MODULO_M 0x00000200
|
|
#define PKA_FUNCTION_MODULO_S 9
|
|
#define PKA_FUNCTION_DIVIDE 0x00000100 /**< Perform divide operation */
|
|
#define PKA_FUNCTION_DIVIDE_M 0x00000100
|
|
#define PKA_FUNCTION_DIVIDE_S 8
|
|
#define PKA_FUNCTION_LSHIFT 0x00000080 /**< Perform left shift operation */
|
|
#define PKA_FUNCTION_LSHIFT_M 0x00000080
|
|
#define PKA_FUNCTION_LSHIFT_S 7
|
|
#define PKA_FUNCTION_RSHIFT 0x00000040 /**< Perform right shift operation */
|
|
#define PKA_FUNCTION_RSHIFT_M 0x00000040
|
|
#define PKA_FUNCTION_RSHIFT_S 6
|
|
#define PKA_FUNCTION_SUBTRACT 0x00000020 /**< Perform subtract operation */
|
|
#define PKA_FUNCTION_SUBTRACT_M 0x00000020
|
|
#define PKA_FUNCTION_SUBTRACT_S 5
|
|
#define PKA_FUNCTION_ADD 0x00000010 /**< Perform add operation */
|
|
#define PKA_FUNCTION_ADD_M 0x00000010
|
|
#define PKA_FUNCTION_ADD_S 4
|
|
#define PKA_FUNCTION_MS_ONE 0x00000008 /**< Loads the location of the Most
|
|
Significant one bit within the
|
|
result word indicated in the
|
|
PKA_MSW register into bits [4:0]
|
|
of the PKA_DIVMSW register - can
|
|
only be used with basic PKCP
|
|
operations, except for Divide,
|
|
Modulo and Compare. */
|
|
#define PKA_FUNCTION_MS_ONE_M 0x00000008
|
|
#define PKA_FUNCTION_MS_ONE_S 3
|
|
#define PKA_FUNCTION_ADDSUB 0x00000002 /**< Perform combined add/subtract
|
|
operation */
|
|
#define PKA_FUNCTION_ADDSUB_M 0x00000002
|
|
#define PKA_FUNCTION_ADDSUB_S 1
|
|
#define PKA_FUNCTION_MULTIPLY 0x00000001 /**< Perform multiply operation */
|
|
#define PKA_FUNCTION_MULTIPLY_M 0x00000001
|
|
#define PKA_FUNCTION_MULTIPLY_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_COMPARE register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_COMPARE_A_GREATER_THAN_B \
|
|
0x00000004 /**< Vector_A is greater than
|
|
Vector_B */
|
|
|
|
#define PKA_COMPARE_A_GREATER_THAN_B_M \
|
|
0x00000004
|
|
#define PKA_COMPARE_A_GREATER_THAN_B_S 2
|
|
#define PKA_COMPARE_A_LESS_THAN_B \
|
|
0x00000002 /**< Vector_A is less than Vector_B */
|
|
|
|
#define PKA_COMPARE_A_LESS_THAN_B_M \
|
|
0x00000002
|
|
#define PKA_COMPARE_A_LESS_THAN_B_S 1
|
|
#define PKA_COMPARE_A_EQUALS_B 0x00000001 /**< Vector_A is equal to Vector_B */
|
|
#define PKA_COMPARE_A_EQUALS_B_M \
|
|
0x00000001
|
|
#define PKA_COMPARE_A_EQUALS_B_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_MSW register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_MSW_RESULT_IS_ZERO 0x00008000 /**< The result vector is all
|
|
zeroes, ignore the address
|
|
returned in bits [10:0] */
|
|
#define PKA_MSW_RESULT_IS_ZERO_M \
|
|
0x00008000
|
|
#define PKA_MSW_RESULT_IS_ZERO_S 15
|
|
#define PKA_MSW_MSW_ADDRESS_M 0x000007FF /**< Address of the most-significant
|
|
nonzero 32-bit word of the
|
|
result vector in PKA RAM */
|
|
#define PKA_MSW_MSW_ADDRESS_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_DIVMSW register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_DIVMSW_RESULT_IS_ZERO \
|
|
0x00008000 /**< The result vector is all
|
|
zeroes, ignore the address
|
|
returned in bits [10:0] */
|
|
|
|
#define PKA_DIVMSW_RESULT_IS_ZERO_M \
|
|
0x00008000
|
|
#define PKA_DIVMSW_RESULT_IS_ZERO_S 15
|
|
#define PKA_DIVMSW_MSW_ADDRESS_M \
|
|
0x000007FF /**< Address of the most significant
|
|
nonzero 32-bit word of the
|
|
remainder result vector in PKA
|
|
RAM */
|
|
|
|
#define PKA_DIVMSW_MSW_ADDRESS_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_SEQ_CTRL register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_SEQ_CTRL_RESET 0x80000000 /**< Option program ROM: Reset value
|
|
= 0. Read/Write, reset value 0b
|
|
(ZERO). Writing 1b resets the
|
|
sequencer, write to 0b to
|
|
restart operations again. As the
|
|
reset value is 0b, the sequencer
|
|
will automatically start
|
|
operations executing from
|
|
program ROM. This bit should
|
|
always be written with zero and
|
|
ignored when reading this
|
|
register. Option Program RAM:
|
|
Reset value =1. Read/Write,
|
|
reset value 1b (ONE). When 1b,
|
|
the sequencer is held in a reset
|
|
state and the PKA_PROGRAM area
|
|
is accessible for loading the
|
|
sequencer program (while the
|
|
PKA_DATA_RAM is inaccessible),
|
|
write to 0b to (re)start
|
|
sequencer operations and disable
|
|
PKA_PROGRAM area accessibility
|
|
(also enables the PKA_DATA_RAM
|
|
accesses). Resetting the
|
|
sequencer (in order to load
|
|
other firmware) should only be
|
|
done when the PKA Engine is not
|
|
performing any operations (i.e.
|
|
the run bit in the PKA_FUNCTION
|
|
register should be zero). */
|
|
#define PKA_SEQ_CTRL_RESET_M 0x80000000
|
|
#define PKA_SEQ_CTRL_RESET_S 31
|
|
#define PKA_SEQ_CTRL_SEQUENCER_STATUS_M \
|
|
0x0000FF00 /**< These read-only bits can be
|
|
used by the sequencer to
|
|
communicate status to the
|
|
outside world. Bit [8] is also
|
|
used as sequencer interrupt,
|
|
with the complement of this bit
|
|
ORed into the run bit in
|
|
PKA_FUNCTION. This field should
|
|
always be written with zeroes
|
|
and ignored when reading this
|
|
register. */
|
|
|
|
#define PKA_SEQ_CTRL_SEQUENCER_STATUS_S 8
|
|
#define PKA_SEQ_CTRL_SW_CONTROL_STATUS_M \
|
|
0x000000FF /**< These bits can be used by
|
|
software to trigger sequencer
|
|
operations. External logic can
|
|
set these bits by writing 1b,
|
|
cannot reset them by writing 0b.
|
|
The sequencer can reset these
|
|
bits by writing 0b, cannot set
|
|
them by writing 1b. Setting the
|
|
run bit in PKA_FUNCTION together
|
|
with a nonzero sequencer
|
|
operations field automatically
|
|
sets bit [0] here. This field
|
|
should always be written with
|
|
zeroes and ignored when reading
|
|
this register. */
|
|
|
|
#define PKA_SEQ_CTRL_SW_CONTROL_STATUS_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_OPTIONS register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_OPTIONS_FIRST_LNME_FIFO_DEPTH_M \
|
|
0xFF000000 /**< Number of words in the first
|
|
LNME's FIFO RAM Should be
|
|
ignored if LNME configuration is
|
|
0. The contents of this field
|
|
indicate the actual depth as
|
|
selected by the LNME FIFO RAM
|
|
size strap input, fifo_size_sel.
|
|
Note: Reset value is undefined */
|
|
|
|
#define PKA_OPTIONS_FIRST_LNME_FIFO_DEPTH_S 24
|
|
#define PKA_OPTIONS_FIRST_LNME_NR_OF_PES_M \
|
|
0x003F0000 /**< Number of processing elements
|
|
in the pipeline of the first
|
|
LNME Should be ignored if LNME
|
|
configuration is 0. Note: Reset
|
|
value is undefined. */
|
|
|
|
#define PKA_OPTIONS_FIRST_LNME_NR_OF_PES_S 16
|
|
#define PKA_OPTIONS_MMM3A 0x00001000 /**< Reserved for a future
|
|
functional extension to the LNME
|
|
Always 0b */
|
|
#define PKA_OPTIONS_MMM3A_M 0x00001000
|
|
#define PKA_OPTIONS_MMM3A_S 12
|
|
#define PKA_OPTIONS_INT_MASKING 0x00000800 /**< Value 0b indicates that the
|
|
main interrupt output (bit [1]
|
|
of the interrupts output bus) is
|
|
the direct complement of the run
|
|
bit in the PKA_CONTROL register,
|
|
value 1b indicates that
|
|
interrupt masking logic is
|
|
present for this output. Note:
|
|
Reset value is undefined */
|
|
#define PKA_OPTIONS_INT_MASKING_M \
|
|
0x00000800
|
|
#define PKA_OPTIONS_INT_MASKING_S 11
|
|
#define PKA_OPTIONS_PROTECTION_OPTION_M \
|
|
0x00000700 /**< Value 0 indicates no additional
|
|
protection against side channel
|
|
attacks, value 1 indicates the
|
|
SCAP option, value 3 indicates
|
|
the PROT option; other values
|
|
are reserved. Note: Reset value
|
|
is undefined */
|
|
|
|
#define PKA_OPTIONS_PROTECTION_OPTION_S 8
|
|
#define PKA_OPTIONS_PROGRAM_RAM 0x00000080 /**< Value 1b indicates sequencer
|
|
program storage in RAM, value 0b
|
|
in ROM. Note: Reset value is
|
|
undefined */
|
|
#define PKA_OPTIONS_PROGRAM_RAM_M \
|
|
0x00000080
|
|
#define PKA_OPTIONS_PROGRAM_RAM_S 7
|
|
#define PKA_OPTIONS_SEQUENCER_CONFIGURATION_M \
|
|
0x00000060 /**< Value 1 indicates a standard
|
|
sequencer; other values are
|
|
reserved. */
|
|
|
|
#define PKA_OPTIONS_SEQUENCER_CONFIGURATION_S 5
|
|
#define PKA_OPTIONS_LNME_CONFIGURATION_M \
|
|
0x0000001C /**< Value 0 indicates NO LNME,
|
|
value 1 indicates one standard
|
|
LNME (with alpha = 32, beta =
|
|
8); other values reserved. Note:
|
|
Reset value is undefined */
|
|
|
|
#define PKA_OPTIONS_LNME_CONFIGURATION_S 2
|
|
#define PKA_OPTIONS_PKCP_CONFIGURATION_M \
|
|
0x00000003 /**< Value 1 indicates a PKCP with a
|
|
16x16 multiplier, value 2
|
|
indicates a PKCP with a 32x32
|
|
multiplier, other values
|
|
reserved. Note: Reset value is
|
|
undefined. */
|
|
|
|
#define PKA_OPTIONS_PKCP_CONFIGURATION_S 0
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_SW_REV register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_SW_REV_FW_CAPABILITIES_M \
|
|
0xF0000000 /**< 4-bit binary encoding for the
|
|
functionality implemented in the
|
|
firmware. Value 0 indicates
|
|
basic ModExp with/without CRT.
|
|
Value 1 adds Modular Inversion,
|
|
value 2 adds Modular Inversion
|
|
and ECC operations. Values 3-15
|
|
are reserved. */
|
|
|
|
#define PKA_SW_REV_FW_CAPABILITIES_S 28
|
|
#define PKA_SW_REV_MAJOR_FW_REVISION_M \
|
|
0x0F000000 /**< 4-bit binary encoding of the
|
|
major firmware revision number */
|
|
|
|
#define PKA_SW_REV_MAJOR_FW_REVISION_S 24
|
|
#define PKA_SW_REV_MINOR_FW_REVISION_M \
|
|
0x00F00000 /**< 4-bit binary encoding of the
|
|
minor firmware revision number */
|
|
|
|
#define PKA_SW_REV_MINOR_FW_REVISION_S 20
|
|
#define PKA_SW_REV_FW_PATCH_LEVEL_M \
|
|
0x000F0000 /**< 4-bit binary encoding of the
|
|
firmware patch level, initial
|
|
release will carry value zero
|
|
Patches are used to remove bugs
|
|
without changing the
|
|
functionality or interface of a
|
|
module. */
|
|
|
|
#define PKA_SW_REV_FW_PATCH_LEVEL_S 16
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA_REVISION register registers bit fields
|
|
* @{
|
|
*/
|
|
#define PKA_REVISION_MAJOR_HW_REVISION_M \
|
|
0x0F000000 /**< 4-bit binary encoding of the
|
|
major hardware revision number */
|
|
|
|
#define PKA_REVISION_MAJOR_HW_REVISION_S 24
|
|
#define PKA_REVISION_MINOR_HW_REVISION_M \
|
|
0x00F00000 /**< 4-bit binary encoding of the
|
|
minor hardware revision number */
|
|
|
|
#define PKA_REVISION_MINOR_HW_REVISION_S 20
|
|
#define PKA_REVISION_HW_PATCH_LEVEL_M \
|
|
0x000F0000 /**< 4-bit binary encoding of the
|
|
hardware patch level, initial
|
|
release will carry value zero
|
|
Patches are used to remove bugs
|
|
without changing the
|
|
functionality or interface of a
|
|
module. */
|
|
|
|
#define PKA_REVISION_HW_PATCH_LEVEL_S 16
|
|
#define PKA_REVISION_COMPLEMENT_OF_BASIC_EIP_NUMBER_M \
|
|
0x0000FF00 /**< Bit-by-bit logic complement of
|
|
bits [7:0], EIP-28 gives 0xE3 */
|
|
|
|
#define PKA_REVISION_COMPLEMENT_OF_BASIC_EIP_NUMBER_S 8
|
|
#define PKA_REVISION_BASIC_EIP_NUMBER_M \
|
|
0x000000FF /**< 8-bit binary encoding of the
|
|
EIP number, EIP-28 gives 0x1C */
|
|
|
|
#define PKA_REVISION_BASIC_EIP_NUMBER_S 0
|
|
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA driver return codes
|
|
* @{
|
|
*/
|
|
#define PKA_STATUS_SUCCESS 0 /**< Success */
|
|
#define PKA_STATUS_FAILURE 1 /**< Failure */
|
|
#define PKA_STATUS_INVALID_PARAM 2 /**< Invalid parameter */
|
|
#define PKA_STATUS_BUF_UNDERFLOW 3 /**< Buffer underflow */
|
|
#define PKA_STATUS_RESULT_0 4 /**< Result is all zeros */
|
|
#define PKA_STATUS_A_GR_B 5 /**< Big number compare return status if
|
|
the first big num is greater than
|
|
the second. */
|
|
#define PKA_STATUS_A_LT_B 6 /**< Big number compare return status if
|
|
the first big num is less than the
|
|
second. */
|
|
#define PKA_STATUS_OPERATION_INPRG 7 /**< PKA operation is in progress. */
|
|
#define PKA_STATUS_OPERATION_NOT_INPRG 8 /**< No PKA operation is in progress. */
|
|
#define PKA_STATUS_SIGNATURE_INVALID 9 /**< Signature is invalid. */
|
|
|
|
/** @} */
|
|
/*---------------------------------------------------------------------------*/
|
|
/** \name PKA functions
|
|
* @{
|
|
*/
|
|
|
|
/** \brief Enables and resets the PKA engine
|
|
*/
|
|
void pka_init(void);
|
|
|
|
/** \brief Enables the PKA engine
|
|
*/
|
|
void pka_enable(void);
|
|
|
|
/** \brief Disables the PKA engine
|
|
* \note Call this function to save power when the engine is unused.
|
|
*/
|
|
void pka_disable(void);
|
|
|
|
/** \brief Checks the status of the PKA engine operation
|
|
* \retval false Result not yet available, and no error occurred
|
|
* \retval true Result available, or error occurred
|
|
*/
|
|
uint8_t pka_check_status(void);
|
|
|
|
/** \brief Registers a process to be notified of the completion of a PKA
|
|
* operation
|
|
* \param p Process to be polled upon IRQ
|
|
* \note This function is only supposed to be called by the PKA drivers.
|
|
*/
|
|
void pka_register_process_notification(struct process *p);
|
|
|
|
/** @} */
|
|
|
|
#endif /* PKA_H_ */
|
|
|
|
/**
|
|
* @}
|
|
* @}
|
|
*/
|