mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-17 21:09:03 +00:00
f348f4feb2
There are scenarios in which it is beneficial to search for an Etherne chip at several i/o locations. To do so the chip initialization is performed at several i/o locations until it succeeds. In order to allow for that operation model the i/o location fixup needs to be repeatable. Note: This won't work with the RR-Net because the fixup bits overlap with the chip i/o bits.
434 lines
9.8 KiB
ArmAsm
434 lines
9.8 KiB
ArmAsm
;
|
|
; Copyright (c) 2003-2007, Adam Dunkels, Josef Soucek and Oliver Schmidt
|
|
; All rights reserved.
|
|
;
|
|
; Redistribution and use in source and binary forms, with or without
|
|
; modification, are permitted provided that the following conditions
|
|
; are met:
|
|
; 1. Redistributions of source code must retain the above copyright
|
|
; notice, this list of conditions and the following disclaimer.
|
|
; 2. Redistributions in binary form must reproduce the above copyright
|
|
; notice, this list of conditions and the following disclaimer in the
|
|
; documentation and/or other materials provided with the distribution.
|
|
; 3. Neither the name of the Institute nor the names of its contributors
|
|
; may be used to endorse or promote products derived from this software
|
|
; without specific prior written permission.
|
|
;
|
|
; THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
; ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
; OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
; HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
; LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
; OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
; SUCH DAMAGE.
|
|
;
|
|
; This file is part of the Contiki operating system.
|
|
;
|
|
; Author: Adam Dunkels <adam@sics.se>, Josef Soucek <josef.soucek@ide64.org>,
|
|
; Oliver Schmidt <ol.sc@web.de>
|
|
;
|
|
;---------------------------------------------------------------------
|
|
|
|
.macpack module
|
|
module_header _lan91c96
|
|
|
|
; Driver signature
|
|
.byte $65, $74, $68 ; "eth"
|
|
.byte $01 ; Ethernet driver API version number
|
|
|
|
; Ethernet address
|
|
mac: .byte $00, $80, $0F ; OUI of Standard Microsystems
|
|
.byte $11, $11, $11
|
|
|
|
; Buffer attributes
|
|
bufaddr:.res 2 ; Address
|
|
bufsize:.res 2 ; Size
|
|
|
|
; Jump table.
|
|
jmp init
|
|
jmp poll
|
|
jmp send
|
|
jmp exit
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
.if DYN_DRV
|
|
|
|
.zeropage
|
|
sp: .res 2 ; Stack pointer (Do not trash !)
|
|
reg: .res 2 ; Address of register base
|
|
ptr: .res 2 ; Indirect addressing pointer
|
|
len: .res 2 ; Frame length
|
|
|
|
.else
|
|
|
|
.include "zeropage.inc"
|
|
reg := ptr1 ; Address of register base
|
|
ptr := ptr2 ; Indirect addressing pointer
|
|
len := ptr3 ; Frame length
|
|
|
|
.endif
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
.rodata
|
|
|
|
fixup: .byte fixup02-fixup01, fixup03-fixup02, fixup04-fixup03
|
|
.byte fixup05-fixup04, fixup06-fixup05, fixup07-fixup06
|
|
.byte fixup08-fixup07, fixup09-fixup08, fixup10-fixup09
|
|
.byte fixup11-fixup10, fixup12-fixup11, fixup13-fixup12
|
|
.byte fixup14-fixup13, fixup15-fixup14, fixup16-fixup15
|
|
.byte fixup17-fixup16, fixup18-fixup17, fixup19-fixup18
|
|
.byte fixup20-fixup19, fixup21-fixup20, fixup22-fixup21
|
|
.byte fixup23-fixup22, fixup24-fixup23, fixup25-fixup24
|
|
.byte fixup26-fixup25, fixup27-fixup26, fixup28-fixup27
|
|
.byte fixup29-fixup28, fixup30-fixup29, fixup31-fixup30
|
|
.byte fixup32-fixup31, fixup33-fixup32, fixup34-fixup33
|
|
.byte fixup35-fixup34, fixup36-fixup35, fixup37-fixup36
|
|
.byte fixup38-fixup37, fixup39-fixup38
|
|
|
|
fixups = * - fixup
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
; 3 most significant nibbles are fixed up at runtime
|
|
ethbsr := $FFFE ; Bank select register R/W (2B)
|
|
|
|
; Register bank 0
|
|
ethtcr := $FFF0 ; Transmition control register R/W (2B)
|
|
ethephsr := $FFF2 ; EPH status register R/O (2B)
|
|
ethrcr := $FFF4 ; Receive control register R/W (2B)
|
|
ethecr := $FFF6 ; Counter register R/O (2B)
|
|
ethmir := $FFF8 ; Memory information register R/O (2B)
|
|
ethmcr := $FFFA ; Memory Config. reg. +0 R/W +1 R/O (2B)
|
|
|
|
; Register bank 1
|
|
ethcr := $FFF0 ; Configuration register R/W (2B)
|
|
ethbar := $FFF2 ; Base address register R/W (2B)
|
|
ethiar := $FFF4 ; Individual address register R/W (6B)
|
|
ethgpr := $FFFA ; General address register R/W (2B)
|
|
ethctr := $FFFC ; Control register R/W (2B)
|
|
|
|
; Register bank 2
|
|
ethmmucr := $FFF0 ; MMU command register W/O (1B)
|
|
ethautotx := $FFF1 ; AUTO TX start register R/W (1B)
|
|
ethpnr := $FFF2 ; Packet number register R/W (1B)
|
|
etharr := $FFF3 ; Allocation result register R/O (1B)
|
|
ethfifo := $FFF4 ; FIFO ports register R/O (2B)
|
|
ethptr := $FFF6 ; Pointer register R/W (2B)
|
|
ethdata := $FFF8 ; Data register R/W (4B)
|
|
ethist := $FFFC ; Interrupt status register R/O (1B)
|
|
ethack := $FFFC ; Interrupt acknowledge register W/O (1B)
|
|
ethmsk := $FFFD ; Interrupt mask register R/W (1B)
|
|
|
|
; Register bank 3
|
|
ethmt := $FFF0 ; Multicast table R/W (8B)
|
|
ethmgmt := $FFF8 ; Management interface R/W (2B)
|
|
ethrev := $FFFA ; Revision register R/W (2B)
|
|
ethercv := $FFFC ; Early RCV register R/W (2B)
|
|
|
|
.data
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
init:
|
|
; Save address of register base
|
|
sta reg
|
|
stx reg+1
|
|
|
|
; Start with first fixup location
|
|
lda #<(fixup01+1)
|
|
ldx #>(fixup01+1)
|
|
sta ptr
|
|
stx ptr+1
|
|
ldx #$FF
|
|
ldy #$00
|
|
|
|
; Fixup address at location
|
|
: lda (ptr),y
|
|
and #$0F
|
|
ora reg
|
|
sta (ptr),y
|
|
iny
|
|
lda reg+1
|
|
sta (ptr),y
|
|
dey
|
|
|
|
; Advance to next fixup location
|
|
inx
|
|
cpx #fixups
|
|
bcs :+
|
|
lda ptr
|
|
clc
|
|
adc fixup,x
|
|
sta ptr
|
|
bcc :-
|
|
inc ptr+1
|
|
bcs :- ; Always
|
|
|
|
; Check bank select register upper byte to always read as $33
|
|
: ldy #$00
|
|
fixup01:sty ethbsr+1
|
|
fixup02:lda ethbsr+1
|
|
cmp #$33
|
|
beq :+
|
|
sec
|
|
rts
|
|
|
|
; Reset ETH card
|
|
: ; Bank 0
|
|
fixup03:sty ethbsr
|
|
|
|
lda #%10000000 ; Software reset
|
|
fixup04:sta ethrcr+1
|
|
|
|
fixup05:sty ethrcr
|
|
fixup06:sty ethrcr+1
|
|
|
|
; Delay
|
|
: cmp ($FF,x) ; 6 cycles
|
|
cmp ($FF,x) ; 6 cycles
|
|
iny ; 2 cycles
|
|
bne :- ; 3 cycles
|
|
; 17 * 256 = 4352 -> 4,4 ms
|
|
|
|
; Enable transmit and receive
|
|
lda #%10000001 ; Enable transmit TXENA, PAD_EN
|
|
ldx #%00000011 ; Enable receive, strip CRC ???
|
|
fixup07:sta ethtcr
|
|
fixup08:stx ethrcr+1
|
|
|
|
lda #$01 ; Bank 1
|
|
fixup09:sta ethbsr
|
|
|
|
fixup10:lda ethcr+1
|
|
ora #%00010000 ; No wait (IOCHRDY)
|
|
fixup11:sta ethcr+1
|
|
|
|
lda #%00001001 ; Auto release
|
|
fixup12:sta ethctr+1
|
|
|
|
; Set MAC address
|
|
ldy #$00
|
|
: lda mac,y
|
|
fixup13:sta ethiar,y
|
|
iny
|
|
cpy #$06
|
|
bcc :-
|
|
|
|
; Set interrupt mask
|
|
lda #$02 ; Bank 2
|
|
fixup14:sta ethbsr
|
|
|
|
lda #%00000000 ; No interrupts
|
|
fixup15:sta ethmsk
|
|
tax
|
|
clc
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
poll:
|
|
fixup16:lda ethist
|
|
and #%00000001 ; RCV INT
|
|
beq :+
|
|
|
|
; Process the incoming packet
|
|
; ---------------------------
|
|
|
|
lda #$00
|
|
ldx #%11100000 ; RCV, AUTO INCR., READ
|
|
fixup17:sta ethptr
|
|
fixup18:stx ethptr+1
|
|
|
|
; Last word contains 'last data byte' and $60 or 'fill byte' and $40
|
|
fixup19:lda ethdata ; Status word
|
|
fixup20:lda ethdata ; Need high byte only
|
|
|
|
; Move ODDFRM bit into carry:
|
|
; - Even packet length -> carry clear -> subtract 6 bytes
|
|
; - Odd packet length -> carry set -> subtract 5 bytes
|
|
lsr
|
|
lsr
|
|
lsr
|
|
lsr
|
|
lsr
|
|
|
|
; The packet contains 3 extra words
|
|
fixup21:lda ethdata ; Total number of bytes
|
|
sbc #$05 ; Actually 5 or 6 depending on carry
|
|
sta len
|
|
fixup22:lda ethdata
|
|
sbc #$00
|
|
sta len+1
|
|
|
|
; Is bufsize < len ?
|
|
lda bufsize
|
|
cmp len
|
|
lda bufsize+1
|
|
sbc len+1
|
|
bcs :++
|
|
|
|
; Yes, skip packet
|
|
jsr releasepacket
|
|
|
|
; No packet available
|
|
lda #$00
|
|
: tax
|
|
sec
|
|
rts
|
|
|
|
; Read bytes into buffer
|
|
: jsr adjustptr
|
|
:
|
|
fixup23:lda ethdata
|
|
sta (ptr),y
|
|
iny
|
|
bne :-
|
|
inc ptr+1
|
|
dex
|
|
bpl :-
|
|
|
|
; Remove and release RX packet from the FIFO
|
|
jsr releasepacket
|
|
|
|
; Return packet length
|
|
lda len
|
|
ldx len+1
|
|
clc
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
send:
|
|
; Save packet length
|
|
sta len
|
|
stx len+1
|
|
|
|
; Allocate memory for TX
|
|
txa
|
|
ora #%00100000
|
|
fixup24:sta ethmmucr
|
|
|
|
; 8 retries
|
|
ldy #$08
|
|
|
|
; Wait for allocation ready
|
|
:
|
|
fixup25:lda ethist
|
|
and #%00001000 ; ALLOC INT
|
|
bne :+
|
|
|
|
; No space avaliable, skip a received frame
|
|
jsr releasepacket
|
|
|
|
; And try again
|
|
dey
|
|
bne :-
|
|
sec
|
|
rts
|
|
|
|
; Acknowledge interrupt, is it necessary ???
|
|
: lda #%00001000
|
|
fixup26:sta ethack
|
|
|
|
; Set packet address
|
|
fixup27:lda etharr
|
|
fixup28:sta ethpnr
|
|
|
|
lda #$00
|
|
ldx #%01000000 ; AUTO INCR.
|
|
fixup29:sta ethptr
|
|
fixup30:stx ethptr+1
|
|
|
|
; Status written by CSMA
|
|
lda #$00
|
|
fixup31:sta ethdata
|
|
fixup32:sta ethdata
|
|
|
|
; Check packet length parity:
|
|
; - Even packet length -> carry set -> add 6 bytes
|
|
; - Odd packet length -> carry clear -> add 5 bytes
|
|
lda len
|
|
eor #$01
|
|
lsr
|
|
|
|
; The packet contains 3 extra words
|
|
lda len
|
|
adc #$05 ; Actually 5 or 6 depending on carry
|
|
fixup33:sta ethdata
|
|
lda len+1
|
|
adc #$00
|
|
fixup34:sta ethdata
|
|
|
|
; Send the packet
|
|
; ---------------
|
|
|
|
; Write bytes from buffer
|
|
jsr adjustptr
|
|
: lda (ptr),y
|
|
fixup35:sta ethdata
|
|
iny
|
|
bne :-
|
|
inc ptr+1
|
|
dex
|
|
bpl :-
|
|
|
|
; Odd packet length ?
|
|
lda len
|
|
lsr
|
|
bcc :+
|
|
|
|
; Yes
|
|
lda #%00100000 ; ODD
|
|
bne :++ ; Always
|
|
|
|
; No
|
|
: lda #$00
|
|
fixup36:sta ethdata ; Fill byte
|
|
:
|
|
fixup37:sta ethdata ; Control byte
|
|
|
|
; Add packet to FIFO
|
|
lda #%11000000 ; ENQUEUE PACKET - transmit packet
|
|
fixup38:sta ethmmucr
|
|
clc
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
exit:
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
releasepacket:
|
|
; Remove and release RX packet from the FIFO
|
|
lda #%10000000
|
|
fixup39:sta ethmmucr
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
adjustptr:
|
|
lda len
|
|
ldx len+1
|
|
eor #$FF ; Two's complement part 1
|
|
tay
|
|
iny ; Two's complement part 2
|
|
sty reg
|
|
sec
|
|
lda bufaddr
|
|
sbc reg
|
|
sta ptr
|
|
lda bufaddr+1
|
|
sbc #$00
|
|
sta ptr+1
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|