mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-16 07:28:57 +00:00
931 lines
43 KiB
C
931 lines
43 KiB
C
/* This file has been prepared for Doxygen automatic documentation generation.*/
|
|
/*! \file *********************************************************************
|
|
*
|
|
* \brief
|
|
* This file contains the USB driver routines.
|
|
*
|
|
* \addtogroup usbstick
|
|
*
|
|
* \author
|
|
* Atmel Corporation: http://www.atmel.com \n
|
|
* Support email: avr@atmel.com
|
|
*
|
|
******************************************************************************/
|
|
/* Copyright (c) 2008 ATMEL Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
* Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in
|
|
the documentation and/or other materials provided with the
|
|
distribution.
|
|
* Neither the name of the copyright holders nor the names of
|
|
contributors may be used to endorse or promote products derived
|
|
from this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef _USB_DRV_H_
|
|
#define _USB_DRV_H_
|
|
|
|
#include "compiler.h"
|
|
|
|
/**
|
|
* \addtogroup usbdriver
|
|
* @{
|
|
*/
|
|
|
|
//_____ I N C L U D E S ____________________________________________________
|
|
|
|
|
|
typedef enum endpoint_parameter{ep_num, ep_type, ep_direction, ep_size, ep_bank, nyet_status} t_endpoint_parameter;
|
|
|
|
|
|
//_____ M A C R O S ________________________________________________________
|
|
|
|
#define MAX_EP_NB 7
|
|
|
|
#define EP_CONTROL 0
|
|
#define EP_1 1
|
|
#define EP_2 2
|
|
#define EP_3 3
|
|
#define EP_4 4
|
|
#define EP_5 5
|
|
#define EP_6 6
|
|
#define EP_7 7
|
|
|
|
#define PIPE_CONTROL 0
|
|
#define PIPE_0 0
|
|
#define PIPE_1 1
|
|
#define PIPE_2 2
|
|
#define PIPE_3 3
|
|
#define PIPE_4 4
|
|
#define PIPE_5 5
|
|
#define PIPE_6 6
|
|
#define PIPE_7 7
|
|
|
|
// USB EndPoint
|
|
#define MSK_EP_DIR 0x7F
|
|
#define MSK_UADD 0x7F
|
|
#define MSK_EPTYPE 0xC0
|
|
#define MSK_EPSIZE 0x70
|
|
#define MSK_EPBK 0x0C
|
|
#define MSK_DTSEQ 0x0C
|
|
#define MSK_NBUSYBK 0x03
|
|
#define MSK_CURRBK 0x03
|
|
#define MSK_DAT 0xFF // UEDATX
|
|
#define MSK_BYCTH 0x07 // UEBCHX
|
|
#define MSK_BYCTL 0xFF // UEBCLX
|
|
#define MSK_EPINT 0x7F // UEINT
|
|
#define MSK_HADDR 0xFF // UHADDR
|
|
|
|
// USB Pipe
|
|
#define MSK_PNUM 0x07 // UPNUM
|
|
#define MSK_PRST 0x7F // UPRST
|
|
#define MSK_PTYPE 0xC0 // UPCFG0X
|
|
#define MSK_PTOKEN 0x30
|
|
#define MSK_PEPNUM 0x0F
|
|
#define MSK_PSIZE 0x70 // UPCFG1X
|
|
#define MSK_PBK 0x0C
|
|
|
|
#define MSK_NBUSYBK 0x03
|
|
|
|
#define MSK_ERROR 0x1F
|
|
|
|
#define MSK_PTYPE 0xC0 // UPCFG0X
|
|
#define MSK_PTOKEN 0x30
|
|
#define MSK_TOKEN_SETUP 0x30
|
|
#define MSK_TOKEN_IN 0x10
|
|
#define MSK_TOKEN_OUT 0x20
|
|
#define MSK_PEPNUM 0x0F
|
|
|
|
#define MSK_PSIZE 0x70 // UPCFG1X
|
|
#define MSK_PBK 0x0C
|
|
|
|
|
|
// Parameters for endpoint configuration
|
|
// These define are the values used to enable and configure an endpoint.
|
|
#define TYPE_CONTROL 0
|
|
#define TYPE_ISOCHRONOUS 1
|
|
#define TYPE_BULK 2
|
|
#define TYPE_INTERRUPT 3
|
|
//typedef enum ep_type {TYPE_CONTROL, TYPE_BULK, TYPE_ISOCHRONOUS, TYPE_INTERRUPT} e_ep_type;
|
|
|
|
#define DIRECTION_OUT 0
|
|
#define DIRECTION_IN 1
|
|
//typedef enum ep_dir {DIRECTION_OUT, DIRECTION_IN} e_ep_dir;
|
|
|
|
#define SIZE_8 0
|
|
#define SIZE_16 1
|
|
#define SIZE_32 2
|
|
#define SIZE_64 3
|
|
#define SIZE_128 4
|
|
#define SIZE_256 5
|
|
#define SIZE_512 6
|
|
#define SIZE_1024 7
|
|
//typedef enum ep_size {SIZE_8, SIZE_16, SIZE_32, SIZE_64,
|
|
// SIZE_128, SIZE_256, SIZE_512, SIZE_1024} e_ep_size;
|
|
|
|
#define ONE_BANK 0
|
|
#define TWO_BANKS 1
|
|
//typedef enum ep_bank {ONE_BANK, TWO_BANKS} e_ep_bank;
|
|
|
|
#define NYET_ENABLED 0
|
|
#define NYET_DISABLED 1
|
|
//typedef enum ep_nyet {NYET_DISABLED, NYET_ENABLED} e_ep_nyet;
|
|
|
|
#define TOKEN_SETUP 0
|
|
#define TOKEN_IN 1
|
|
#define TOKEN_OUT 2
|
|
|
|
#define Is_ep_addr_in(x) ( (x&0x80)? TRUE : FALSE)
|
|
|
|
|
|
//! @ingroup usbdriver
|
|
//! @defgroup Endpoints_configuration Configuration macros for endpoints
|
|
//! List of the standard macro used to configure pipes and endpoints
|
|
//! @{
|
|
#define Usb_build_ep_config0(type, dir, nyet) ((type<<6) | (nyet<<1) | (dir))
|
|
#define Usb_build_ep_config1(size, bank ) ((size<<4) | (bank<<2) )
|
|
#define usb_configure_endpoint(num, type, dir, size, bank, nyet) \
|
|
( Usb_select_endpoint(num), \
|
|
usb_config_ep(Usb_build_ep_config0(type, dir, nyet),\
|
|
Usb_build_ep_config1(size, bank) ))
|
|
|
|
#define Host_build_pipe_config0(type, token, ep_num) ((type<<6) | (token<<4) | (ep_num))
|
|
#define Host_build_pipe_config1(size, bank ) ((size<<4) | (bank<<2) )
|
|
#define host_configure_pipe(num, type, token,ep_num, size, bank, freq) \
|
|
( Host_select_pipe(num), \
|
|
Host_set_interrupt_frequency(freq), \
|
|
host_config_pipe(Host_build_pipe_config0(type, token, ep_num),\
|
|
Host_build_pipe_config1(size, bank) ))
|
|
//! @}
|
|
|
|
//! @ingroup usbdriver
|
|
//! @defgroup USB_regulator USB Pads Regulator drivers
|
|
//! Turns ON/OFF USB pads regulator
|
|
//! @{
|
|
//! Enable internal USB pads regulator
|
|
#define Usb_enable_regulator() (UHWCON |= (1<<UVREGE))
|
|
//! Disable internal USB pads regulator
|
|
#define Usb_disable_regulator() (UHWCON &= ~(1<<UVREGE))
|
|
//! Check regulator enable bit
|
|
#define Is_usb_regulator_enabled() ((UHWCON & (1<<UVREGE)) ? TRUE : FALSE)
|
|
//! @}
|
|
|
|
//! @ingroup usbdriver
|
|
//! @defgroup gen_usb USB common management drivers
|
|
//! These macros manage the USB controller
|
|
//! @{
|
|
//! Enable external UID pin
|
|
#define Usb_enable_uid_pin() (UHWCON |= (1<<UIDE))
|
|
//! Disable external UID pin
|
|
#define Usb_disable_uid_pin() (UHWCON &= ~(1<<UIDE))
|
|
//! Disable external UID pin and force device mode
|
|
#define Usb_force_device_mode() (Usb_disable_uid_pin(), UHWCON |= (1<<UIMOD))
|
|
//! Disable external UID pin and force host mode
|
|
#define Usb_force_host_mode() (Usb_disable_uid_pin(), UHWCON &= ~(1<<UIMOD))
|
|
//! Enable external UVCON pin
|
|
#define Usb_enable_uvcon_pin() (UHWCON |= (1<<UVCONE))
|
|
//! Enable external UVCON pin
|
|
#define Usb_disable_uvcon_pin() (UHWCON &= ~(1<<UVCONE))
|
|
//! Use device full speed mode (default mode)
|
|
#define Usb_full_speed_mode() (UDCON &= ~(1<<LSM))
|
|
//! For device mode, force low speed mode
|
|
#define Usb_low_speed_mode() (UDCON |= (1<<LSM))
|
|
|
|
//! Enable both USB interface and Vbus pad
|
|
#define Usb_enable() (USBCON |= ((1<<USBE) | (1<<OTGPADE)))
|
|
//! Disable both USB interface and Vbus pad
|
|
#define Usb_disable() (USBCON &= ~((1<<USBE) | (1<<OTGPADE)))
|
|
#define Is_usb_enabled() ((USBCON & (1<<USBE)) ? TRUE : FALSE)
|
|
|
|
//! Enable VBUS pad
|
|
#define Usb_enable_vbus_pad() (USBCON |= (1<<OTGPADE))
|
|
//! Disable VBUS pad
|
|
#define Usb_disable_vbus_pad() (USBCON &= ~(1<<OTGPADE))
|
|
|
|
#define Usb_select_device() (USBCON &= ~(1<<HOST))
|
|
#define Usb_select_host() (USBCON |= (1<<HOST))
|
|
#define Is_usb_host_enabled() ((USBCON & (1<<HOST)) ? TRUE : FALSE)
|
|
|
|
//! Stop internal USB clock in interface (freeze the interface register)
|
|
#define Usb_freeze_clock() (USBCON |= (1<<FRZCLK))
|
|
#define Usb_unfreeze_clock() (USBCON &= ~(1<<FRZCLK))
|
|
#define Is_usb_clock_freezed() ((USBCON & (1<<FRZCLK)) ? TRUE : FALSE)
|
|
|
|
#define Usb_enable_id_interrupt() (USBCON |= (1<<IDTE))
|
|
#define Usb_disable_id_interrupt() (USBCON &= ~(1<<IDTE))
|
|
#define Is_usb_id_interrupt_enabled() ((USBCON & (1<<IDTE)) ? TRUE : FALSE)
|
|
#define Is_usb_id_device() ((USBSTA & (1<<ID)) ? TRUE : FALSE)
|
|
#define Usb_ack_id_transition() (USBINT = ~(1<<IDTI))
|
|
#define Is_usb_id_transition() ((USBINT & (1<<IDTI)) ? TRUE : FALSE)
|
|
|
|
#define Usb_enable_vbus_interrupt() (USBCON |= (1<<VBUSTE))
|
|
#define Usb_disable_vbus_interrupt() (USBCON &= ~(1<<VBUSTE))
|
|
#define Is_usb_vbus_interrupt_enabled() ((USBCON & (1<<VBUSTE)) ? TRUE : FALSE)
|
|
#define Is_usb_vbus_high() ((USBSTA & (1<<VBUS)) ? TRUE : FALSE)
|
|
#define Is_usb_vbus_low() ((USBSTA & (1<<VBUS)) ? FALSE : TRUE)
|
|
#define Usb_ack_vbus_transition() (USBINT = ~(1<<VBUSTI))
|
|
#define Is_usb_vbus_transition() ((USBINT & (1<<VBUSTI)) ? TRUE : FALSE)
|
|
|
|
//! returns the USB general interrupts (interrupt enabled)
|
|
#define Usb_get_general_interrupt() (USBINT & (USBCON & MSK_IDTE_VBUSTE))
|
|
//! acks the general interrupts (interrupt enabled)
|
|
#define Usb_ack_all_general_interrupt() (USBINT = ~(USBCON & MSK_IDTE_VBUSTE))
|
|
#define Usb_ack_cache_id_transition(x) ((x) &= ~(1<<IDTI))
|
|
#define Usb_ack_cache_vbus_transition(x) ((x) &= ~(1<<VBUSTI))
|
|
#define Is_usb_cache_id_transition(x) (((x) & (1<<IDTI)) )
|
|
#define Is_usb_cache_vbus_transition(x) (((x) & (1<<VBUSTI)))
|
|
|
|
//! returns the USB Pad interrupts (interrupt enabled)
|
|
#define Usb_get_otg_interrupt() (OTGINT & OTGIEN)
|
|
//! acks the USB Pad interrupts (interrupt enabled)
|
|
#define Usb_ack_all_otg_interrupt() (OTGINT = ~OTGIEN)
|
|
#define Is_otg_cache_bconnection_error(x) (((x) & MSK_BCERRI))
|
|
#define Usb_ack_cache_bconnection_error(x) ((x) &= ~MSK_BCERRI)
|
|
|
|
#define Usb_enter_dpram_mode() (UDPADDH = (1<<DPACC))
|
|
#define Usb_exit_dpram_mode() (UDPADDH = (U8)~(1<<DPACC))
|
|
#define Usb_set_dpram_address(addr) (UDPADDH = (1<<DPACC) + ((Uint16)addr >> 8), UDPADDL = (Uchar)addr)
|
|
#define Usb_write_dpram_byte(val) (UEDATX=val)
|
|
#define Usb_read_dpram_byte() (UEDATX)
|
|
|
|
//! requests for VBus activation
|
|
#define Usb_enable_vbus() (OTGCON |= (1<<VBUSREQ))
|
|
//! requests for VBus desactivation
|
|
#define Usb_disable_vbus() (OTGCON |= (1<<VBUSRQC))
|
|
//! Manually request VBUS without UVCON signal from USB interface
|
|
#define Usb_enable_manual_vbus() (PORTE|=0x80,DDRE|=0x80,Usb_disable_uvcon_pin())
|
|
|
|
//! initiates a Host Negociation Protocol
|
|
#define Usb_device_initiate_hnp() (OTGCON |= (1<<HNPREQ))
|
|
//! accepts a Host Negociation Protocol
|
|
#define Usb_host_accept_hnp() (OTGCON |= (1<<HNPREQ))
|
|
//! rejects a Host Negociation Protocol
|
|
#define Usb_host_reject_hnp() (OTGCON &= ~(1<<HNPREQ))
|
|
//! initiates a Session Request Protocol
|
|
#define Usb_device_initiate_srp() (OTGCON |= (1<<SRPREQ))
|
|
//! selects VBus as SRP method
|
|
#define Usb_select_vbus_srp_method() (OTGCON |= (1<<SRPSEL))
|
|
//! selects data line as SRP method
|
|
#define Usb_select_data_srp_method() (OTGCON &= ~(1<<SRPSEL))
|
|
//! enables hardware control on VBus
|
|
#define Usb_enable_vbus_hw_control() (OTGCON &= ~(1<<VBUSHWC))
|
|
//! disables hardware control on VBus
|
|
#define Usb_disable_vbus_hw_control() (OTGCON |= (1<<VBUSHWC))
|
|
//! tests if VBus has been requested
|
|
#define Is_usb_vbus_enabled() ((OTGCON & (1<<VBUSREQ)) ? TRUE : FALSE)
|
|
//! tests if a HNP occurs
|
|
#define Is_usb_hnp() ((OTGCON & (1<<HNPREQ)) ? TRUE : FALSE)
|
|
//! tests if a SRP from device occurs
|
|
#define Is_usb_device_srp() ((OTGCON & (1<<SRPREQ)) ? TRUE : FALSE)
|
|
|
|
//! enables suspend time out interrupt
|
|
#define Usb_enable_suspend_time_out_interrupt() (OTGIEN |= (1<<STOE))
|
|
//! disables suspend time out interrupt
|
|
#define Usb_disable_suspend_time_out_interrupt() (OTGIEN &= ~(1<<STOE))
|
|
#define Is_suspend_time_out_interrupt_enabled() ((OTGIEN & (1<<STOE)) ? TRUE : FALSE)
|
|
//! acks suspend time out interrupt
|
|
#define Usb_ack_suspend_time_out_interrupt() (OTGINT &= ~(1<<STOI))
|
|
//! tests if a suspend time out occurs
|
|
#define Is_usb_suspend_time_out_interrupt() ((OTGINT & (1<<STOI)) ? TRUE : FALSE)
|
|
|
|
//! enables HNP error interrupt
|
|
#define Usb_enable_hnp_error_interrupt() (OTGIEN |= (1<<HNPERRE))
|
|
//! disables HNP error interrupt
|
|
#define Usb_disable_hnp_error_interrupt() (OTGIEN &= ~(1<<HNPERRE))
|
|
#define Is_hnp_error_interrupt_enabled() ((OTGIEN & (1<<HNPERRE)) ? TRUE : FALSE)
|
|
//! acks HNP error interrupt
|
|
#define Usb_ack_hnp_error_interrupt() (OTGINT &= ~(1<<HNPERRI))
|
|
//! tests if a HNP error occurs
|
|
#define Is_usb_hnp_error_interrupt() ((OTGINT & (1<<HNPERRI)) ? TRUE : FALSE)
|
|
|
|
//! enables role exchange interrupt
|
|
#define Usb_enable_role_exchange_interrupt() (OTGIEN |= (1<<ROLEEXE))
|
|
//! disables role exchange interrupt
|
|
#define Usb_disable_role_exchange_interrupt() (OTGIEN &= ~(1<<ROLEEXE))
|
|
#define Is_role_exchange_interrupt_enabled() ((OTGIEN & (1<<ROLEEXE)) ? TRUE : FALSE)
|
|
//! acks role exchange interrupt
|
|
#define Usb_ack_role_exchange_interrupt() (OTGINT &= ~(1<<ROLEEXI))
|
|
//! tests if a role exchange occurs
|
|
#define Is_usb_role_exchange_interrupt() ((OTGINT & (1<<ROLEEXI)) ? TRUE : FALSE)
|
|
|
|
//! enables B device connection error interrupt
|
|
#define Usb_enable_bconnection_error_interrupt() (OTGIEN |= (1<<BCERRE))
|
|
//! disables B device connection error interrupt
|
|
#define Usb_disable_bconnection_error_interrupt() (OTGIEN &= ~(1<<BCERRE))
|
|
#define Is_bconnection_error_interrupt_enabled() ((OTGIEN & (1<<BCERRE)) ? TRUE : FALSE)
|
|
//! acks B device connection error interrupt
|
|
#define Usb_ack_bconnection_error_interrupt() (OTGINT &= ~(1<<BCERRI))
|
|
//! tests if a B device connection error occurs
|
|
#define Is_usb_bconnection_error_interrupt() ((OTGINT & (1<<BCERRI)) ? TRUE : FALSE)
|
|
|
|
//! enables VBus error interrupt
|
|
#define Usb_enable_vbus_error_interrupt() (OTGIEN |= (1<<VBERRE))
|
|
//! disables VBus error interrupt
|
|
#define Usb_disable_vbus_error_interrupt() (OTGIEN &= ~(1<<VBERRE))
|
|
#define Is_vbus_error_interrupt_enabled() ((OTGIEN & (1<<VBERRE)) ? TRUE : FALSE)
|
|
//! acks VBus error interrupt
|
|
#define Usb_ack_vbus_error_interrupt() (OTGINT &= ~(1<<VBERRI))
|
|
//! tests if a VBus error occurs
|
|
#define Is_usb_vbus_error_interrupt() ((OTGINT & (1<<VBERRI)) ? TRUE : FALSE)
|
|
|
|
//! enables SRP interrupt
|
|
#define Usb_enable_srp_interrupt() (OTGIEN |= (1<<SRPE))
|
|
//! disables SRP interrupt
|
|
#define Usb_disable_srp_interrupt() (OTGIEN &= ~(1<<SRPE))
|
|
#define Is_srp_interrupt_enabled() ((OTGIEN & (1<<SRPE)) ? TRUE : FALSE)
|
|
//! acks SRP interrupt
|
|
#define Usb_ack_srp_interrupt() (OTGINT &= ~(1<<SRPI))
|
|
//! tests if a SRP occurs
|
|
#define Is_usb_srp_interrupt() ((OTGINT & (1<<SRPI)) ? TRUE : FALSE)
|
|
//! @}
|
|
|
|
//! @ingroup usbdriver
|
|
//! @defgroup USB_device_driver USB device controller drivers
|
|
//! These macros manage the USB Device controller.
|
|
//! @{
|
|
//! initiates a remote wake-up
|
|
#define Usb_initiate_remote_wake_up() (UDCON |= (1<<RMWKUP))
|
|
//! detaches from USB bus
|
|
#define Usb_detach() (UDCON |= (1<<DETACH))
|
|
//! attaches to USB bus
|
|
#define Usb_attach() (UDCON &= ~(1<<DETACH))
|
|
//! test if remote wake-up still running
|
|
#define Is_usb_pending_remote_wake_up() ((UDCON & (1<<RMWKUP)) ? TRUE : FALSE)
|
|
//! test if the device is detached
|
|
#define Is_usb_detached() ((UDCON & (1<<DETACH)) ? TRUE : FALSE)
|
|
|
|
//! returns the USB device interrupts (interrupt enabled)
|
|
#define Usb_get_device_interrupt() (UDINT & (1<<UDIEN))
|
|
//! acks the USB device interrupts (interrupt enabled)
|
|
#define Usb_ack_all_device_interrupt() (UDINT = ~(1<<UDIEN))
|
|
|
|
//! enables remote wake-up interrupt
|
|
#define Usb_enable_remote_wake_up_interrupt() (UDIEN |= (1<<UPRSME))
|
|
//! disables remote wake-up interrupt
|
|
#define Usb_disable_remote_wake_up_interrupt() (UDIEN &= ~(1<<UPRSME))
|
|
#define Is_remote_wake_up_interrupt_enabled() ((UDIEN & (1<<UPRSME)) ? TRUE : FALSE)
|
|
//! acks remote wake-up
|
|
#define Usb_ack_remote_wake_up_start() (UDINT = ~(1<<UPRSMI))
|
|
//! tests if remote wake-up still running
|
|
#define Is_usb_remote_wake_up_start() ((UDINT & (1<<UPRSMI)) ? TRUE : FALSE)
|
|
|
|
//! enables resume interrupt
|
|
#define Usb_enable_resume_interrupt() (UDIEN |= (1<<EORSME))
|
|
//! disables resume interrupt
|
|
#define Usb_disable_resume_interrupt() (UDIEN &= ~(1<<EORSME))
|
|
#define Is_resume_interrupt_enabled() ((UDIEN & (1<<EORSME)) ? TRUE : FALSE)
|
|
//! acks resume
|
|
#define Usb_ack_resume() (UDINT = ~(1<<EORSMI))
|
|
//! tests if resume occurs
|
|
#define Is_usb_resume() ((UDINT & (1<<EORSMI)) ? TRUE : FALSE)
|
|
|
|
//! enables wake-up interrupt
|
|
#define Usb_enable_wake_up_interrupt() (UDIEN |= (1<<WAKEUPE))
|
|
//! disables wake-up interrupt
|
|
#define Usb_disable_wake_up_interrupt() (UDIEN &= ~(1<<WAKEUPE))
|
|
#define Is_swake_up_interrupt_enabled() ((UDIEN & (1<<WAKEUPE)) ? TRUE : FALSE)
|
|
//! acks wake-up
|
|
#define Usb_ack_wake_up() (UDINT = ~(1<<WAKEUPI))
|
|
//! tests if wake-up occurs
|
|
#define Is_usb_wake_up() ((UDINT & (1<<WAKEUPI)) ? TRUE : FALSE)
|
|
|
|
//! enables USB reset interrupt
|
|
#define Usb_enable_reset_interrupt() (UDIEN |= (1<<EORSTE))
|
|
//! disables USB reset interrupt
|
|
#define Usb_disable_reset_interrupt() (UDIEN &= ~(1<<EORSTE))
|
|
#define Is_reset_interrupt_enabled() ((UDIEN & (1<<EORSTE)) ? TRUE : FALSE)
|
|
//! acks USB reset
|
|
#define Usb_ack_reset() (UDINT = ~(1<<EORSTI))
|
|
//! tests if USB reset occurs
|
|
#define Is_usb_reset() ((UDINT & (1<<EORSTI)) ? TRUE : FALSE)
|
|
|
|
//! enables Start Of Frame Interrupt
|
|
#define Usb_enable_sof_interrupt() (UDIEN |= (1<<SOFE))
|
|
//! disables Start Of Frame Interrupt
|
|
#define Usb_disable_sof_interrupt() (UDIEN &= ~(1<<SOFE))
|
|
#define Is_sof_interrupt_enabled() ((UDIEN & (1<<SOFE)) ? TRUE : FALSE)
|
|
//! acks Start Of Frame
|
|
#define Usb_ack_sof() (UDINT = ~(1<<SOFI))
|
|
//! tests if Start Of Frame occurs
|
|
#define Is_usb_sof() ((UDINT & (1<<SOFI)) ? TRUE : FALSE)
|
|
|
|
//! enables suspend state interrupt
|
|
#define Usb_enable_suspend_interrupt() (UDIEN |= (1<<SUSPE))
|
|
//! disables suspend state interrupt
|
|
#define Usb_disable_suspend_interrupt() (UDIEN &= ~(1<<SUSPE))
|
|
#define Is_suspend_interrupt_enabled() ((UDIEN & (1<<SUSPE)) ? TRUE : FALSE)
|
|
//! acks Suspend
|
|
#define Usb_ack_suspend() (UDINT = ~(1<<SUSPI))
|
|
//! tests if Suspend state detected
|
|
#define Is_usb_suspend() ((UDINT & (1<<SUSPI)) ? TRUE : FALSE)
|
|
|
|
//! enables USB device address
|
|
#define Usb_enable_address() (UDADDR |= (1<<ADDEN))
|
|
//! disables USB device address
|
|
#define Usb_disable_address() (UDADDR &= ~(1<<ADDEN))
|
|
//! sets the USB device address
|
|
#define Usb_configure_address(addr) (UDADDR = (UDADDR & (1<<ADDEN)) | ((U8)addr & MSK_UADD))
|
|
|
|
//! returns the last frame number
|
|
#define Usb_frame_number() ((U16)((((U16)UDFNUMH) << 8) | ((U16)UDFNUML)))
|
|
//! tests if a crc error occurs in frame number
|
|
#define Is_usb_frame_number_crc_error() ((UDMFN & (1<<FNCERR)) ? TRUE : FALSE)
|
|
//! @}
|
|
|
|
|
|
|
|
//! @ingroup usbdriver
|
|
//! @defgroup usb_gen_ep USB endpoint drivers
|
|
//! These macros manage the common features of the endpoints.
|
|
//! @{
|
|
//! selects the endpoint number to interface with the CPU
|
|
#define Usb_select_endpoint(ep) (UENUM = (U8)ep )
|
|
|
|
//! get the currently selected endpoint number
|
|
#define Usb_get_selected_endpoint() (UENUM )
|
|
|
|
//! resets the selected endpoint
|
|
#define Usb_reset_endpoint(ep) (UERST = 1 << (U8)ep, UERST = 0)
|
|
|
|
//! enables the current endpoint
|
|
#define Usb_enable_endpoint() (UECONX |= (1<<EPEN))
|
|
//! enables the STALL handshake for the next transaction
|
|
#define Usb_enable_stall_handshake() (UECONX |= (1<<STALLRQ))
|
|
//! resets the data toggle sequence
|
|
#define Usb_reset_data_toggle() (UECONX |= (1<<RSTDT))
|
|
//! disables the current endpoint
|
|
#define Usb_disable_endpoint() (UECONX &= ~(1<<EPEN))
|
|
//! disables the STALL handshake
|
|
#define Usb_disable_stall_handshake() (UECONX |= (1<<STALLRQC))
|
|
//! selects endpoint interface on CPU
|
|
#define Usb_select_epnum_for_cpu() (UECONX &= ~(1<<EPNUMS))
|
|
//! tests if the current endpoint is enabled
|
|
#define Is_usb_endpoint_enabled() ((UECONX & (1<<EPEN)) ? TRUE : FALSE)
|
|
//! tests if STALL handshake request is running
|
|
#define Is_usb_endpoint_stall_requested() ((UECONX & (1<<STALLRQ)) ? TRUE : FALSE)
|
|
|
|
//! configures the current endpoint
|
|
#define Usb_configure_endpoint_type(type) (UECFG0X = (UECFG0X & ~(MSK_EPTYPE)) | ((U8)type << 6))
|
|
//! configures the current endpoint direction
|
|
#define Usb_configure_endpoint_direction(dir) (UECFG0X = (UECFG0X & ~(1<<EPDIR)) | ((U8)dir))
|
|
|
|
//! configures the current endpoint size
|
|
#define Usb_configure_endpoint_size(size) (UECFG1X = (UECFG1X & ~MSK_EPSIZE) | ((U8)size << 4))
|
|
//! configures the current endpoint number of banks
|
|
#define Usb_configure_endpoint_bank(bank) (UECFG1X = (UECFG1X & ~MSK_EPBK) | ((U8)bank << 2))
|
|
//! allocates the current configuration in DPRAM memory
|
|
#define Usb_allocate_memory() (UECFG1X |= (1<<ALLOC))
|
|
//! un-allocates the current configuration in DPRAM memory
|
|
#define Usb_unallocate_memory() (UECFG1X &= ~(1<<ALLOC))
|
|
|
|
//! acks endpoint overflow interrupt
|
|
#define Usb_ack_overflow_interrupt() (UESTA0X &= ~(1<<OVERFI))
|
|
//! acks endpoint underflow memory
|
|
#define Usb_ack_underflow_interrupt() (UESTA0X &= ~(1<<UNDERFI))
|
|
//! acks Zero Length Packet received
|
|
#define Usb_ack_zlp() (UESTA0X &= ~(1<<ZLPSEEN))
|
|
//! returns data toggle
|
|
#define Usb_data_toggle() ((UESTA0X&MSK_DTSEQ) >> 2)
|
|
//! returns the number of busy banks
|
|
#define Usb_nb_busy_bank() (UESTA0X & MSK_NBUSYBK)
|
|
//! tests if at least one bank is busy
|
|
#define Is_usb_one_bank_busy() ((UESTA0X & MSK_NBUSYBK) == 0 ? FALSE : TRUE)
|
|
//! tests if current endpoint is configured
|
|
#define Is_endpoint_configured() ((UESTA0X & (1<<CFGOK)) ? TRUE : FALSE)
|
|
//! tests if an overflows occurs
|
|
#define Is_usb_overflow() ((UESTA0X & (1<<OVERFI)) ? TRUE : FALSE)
|
|
//! tests if an underflow occurs
|
|
#define Is_usb_underflow() ((UESTA0X & (1<<UNDERFI)) ? TRUE : FALSE)
|
|
//! tests if a ZLP has been detected
|
|
#define Is_usb_zlp() ((UESTA0X & (1<<ZLPSEEN)) ? TRUE : FALSE)
|
|
|
|
//! returns the control direction
|
|
#define Usb_control_direction() ((UESTA1X & (1<<CTRLDIR)) >> 2)
|
|
//! returns the number of the current bank
|
|
#define Usb_current_bank() ( UESTA1X & MSK_CURRBK)
|
|
|
|
//! clears FIFOCON bit
|
|
#define Usb_ack_fifocon() (UEINTX &= ~(1<<FIFOCON))
|
|
//! acks NAK IN received
|
|
#define Usb_ack_nak_in() (UEINTX &= ~(1<<NAKINI))
|
|
//! acks NAK OUT received
|
|
#define Usb_ack_nak_out() (UEINTX &= ~(1<<NAKOUTI))
|
|
//! acks receive SETUP
|
|
#define Usb_ack_receive_setup() (UEINTX &= ~(1<<RXSTPI))
|
|
//! acks reveive OUT
|
|
#define Usb_ack_receive_out() (UEINTX &= ~(1<<RXOUTI), Usb_ack_fifocon())
|
|
//! acks STALL sent
|
|
#define Usb_ack_stalled() (MSK_STALLEDI= 0)
|
|
//! acks IN ready
|
|
#define Usb_ack_in_ready() (UEINTX &= ~(1<<TXINI), Usb_ack_fifocon())
|
|
//! Kills last bank
|
|
#define Usb_kill_last_in_bank() (UENTTX |= (1<<RXOUTI))
|
|
//! tests if endpoint read allowed
|
|
#define Is_usb_read_enabled() (UEINTX&(1<<RWAL))
|
|
//! tests if endpoint write allowed
|
|
#define Is_usb_write_enabled() (UEINTX&(1<<RWAL))
|
|
//! tests if read allowed on control endpoint
|
|
#define Is_usb_read_control_enabled() (UEINTX&(1<<TXINI))
|
|
//! tests if SETUP received
|
|
#define Is_usb_receive_setup() (UEINTX&(1<<RXSTPI))
|
|
//! tests if OUT received
|
|
#define Is_usb_receive_out() (UEINTX&(1<<RXOUTI))
|
|
//! tests if IN ready
|
|
#define Is_usb_in_ready() (UEINTX&(1<<TXINI))
|
|
//! sends IN
|
|
#define Usb_send_in() (UEINTX &= ~(1<<FIFOCON))
|
|
//! sends IN on control endpoint
|
|
#define Usb_send_control_in() (UEINTX &= ~(1<<TXINI))
|
|
//! frees OUT bank
|
|
#define Usb_free_out_bank() (UEINTX &= ~(1<<FIFOCON))
|
|
//! acks OUT on control endpoint
|
|
#define Usb_ack_control_out() (UEINTX &= ~(1<<RXOUTI))
|
|
|
|
//! enables flow error interrupt
|
|
#define Usb_enable_flow_error_interrupt() (UEIENX |= (1<<FLERRE))
|
|
//! enables NAK IN interrupt
|
|
#define Usb_enable_nak_in_interrupt() (UEIENX |= (1<<NAKINE))
|
|
//! enables NAK OUT interrupt
|
|
#define Usb_enable_nak_out_interrupt() (UEIENX |= (1<<NAKOUTE))
|
|
//! enables receive SETUP interrupt
|
|
#define Usb_enable_receive_setup_interrupt() (UEIENX |= (1<<RXSTPE))
|
|
//! enables receive OUT interrupt
|
|
#define Usb_enable_receive_out_interrupt() (UEIENX |= (1<<RXOUTE))
|
|
//! enables STALL sent interrupt
|
|
#define Usb_enable_stalled_interrupt() (UEIENX |= (1<<STALLEDE))
|
|
//! enables IN ready interrupt
|
|
#define Usb_enable_in_ready_interrupt() (UEIENX |= (1<<TXINE))
|
|
//! disables flow error interrupt
|
|
#define Usb_disable_flow_error_interrupt() (UEIENX &= ~(1<<FLERRE))
|
|
//! disables NAK IN interrupt
|
|
#define Usb_disable_nak_in_interrupt() (UEIENX &= ~(1<<NAKINE))
|
|
//! disables NAK OUT interrupt
|
|
#define Usb_disable_nak_out_interrupt() (UEIENX &= ~(1<<NAKOUTE))
|
|
//! disables receive SETUP interrupt
|
|
#define Usb_disable_receive_setup_interrupt() (UEIENX &= ~(1<<RXSTPE))
|
|
//! disables receive OUT interrupt
|
|
#define Usb_disable_receive_out_interrupt() (UEIENX &= ~(1<<RXOUTE))
|
|
//! disables STALL sent interrupt
|
|
#define Usb_disable_stalled_interrupt() (UEIENX &= ~(1<<STALLEDE))
|
|
//! disables IN ready interrupt
|
|
#define Usb_disable_in_ready_interrupt() (UEIENX &= ~(1<<TXIN))
|
|
|
|
//! returns FIFO byte for current endpoint
|
|
#define Usb_read_byte() (UEDATX)
|
|
//! writes byte in FIFO for current endpoint
|
|
#define Usb_write_byte(byte) (UEDATX = (U8)byte)
|
|
|
|
//! returns number of bytes in FIFO current endpoint (16 bits)
|
|
#define Usb_byte_counter() ((((U16)UEBCHX) << 8) | (UEBCLX))
|
|
//! returns number of bytes in FIFO current endpoint (8 bits)
|
|
#define Usb_byte_counter_8() ((U8)UEBCLX)
|
|
|
|
//! tests the general endpoint interrupt flags
|
|
#define Usb_interrupt_flags() (UEINT)
|
|
//! tests the general endpoint interrupt flags
|
|
#define Is_usb_endpoint_event() (Usb_interrupt_flags() != 0x00)
|
|
//! @}
|
|
|
|
|
|
//! @ingroup usbdriver
|
|
//! @defgroup host_management USB host controller drivers
|
|
//! These macros manage the USB Host controller.
|
|
//! @{
|
|
//! allocates the current configuration in DPRAM memory
|
|
#define Host_allocate_memory() (UPCFG1X |= (1<<ALLOC))
|
|
//! un-allocates the current configuration in DPRAM memory
|
|
#define Host_unallocate_memory() (UPCFG1X &= ~(1<<ALLOC))
|
|
|
|
//! enables USB Host function
|
|
#define Host_enable() (USBCON |= (1<<HOST))
|
|
|
|
#ifndef SOFEN
|
|
#define SOFEN 0 //For AVRGCC, SOFEN bit missing in default sfr file
|
|
#endif
|
|
//! enables SOF generation
|
|
#define Host_enable_sof() (UHCON |= (1<<SOFEN))
|
|
//! disables SOF generation
|
|
#define Host_disable_sof() (UHCON &= ~(1<<SOFEN))
|
|
//! sends a USB Reset to the device
|
|
#define Host_send_reset() (UHCON |= (1<<RESET))
|
|
//! tests if USB Reset running
|
|
#define Host_is_reset() ((UHCON & (1<<RESET)) ? TRUE : FALSE)
|
|
//! sends a USB Resume to the device
|
|
#define Host_send_resume() (UHCON |= (1<<RESUME))
|
|
//! tests if USB Resume running
|
|
#define Host_is_resume() ((UHCON & (1<<RESUME)) ? TRUE : FALSE)
|
|
|
|
//! enables host start of frame interrupt
|
|
#define Host_enable_sof_interrupt() (UHIEN |= (1<<HSOFE))
|
|
//! enables host start of frame interrupt
|
|
#define Host_disable_sof_interrupt() (UHIEN &= ~(1<<HSOFE))
|
|
#define Is_host_sof_interrupt_enabled() ((UHIEN & (1<<HSOFE)) ? TRUE : FALSE)
|
|
//! tests if SOF detected
|
|
#define Host_is_sof() ((UHINT & (1<<HSOFI)) ? TRUE : FALSE)
|
|
#define Is_host_sof() ((UHINT & (1<<HSOFI)) ? TRUE : FALSE)
|
|
#define Host_ack_sof() (UHINT &= ~(1<<HSOFI))
|
|
|
|
//! enables host wake up interrupt detection
|
|
#define Host_enable_hwup_interrupt() (UHIEN |= (1<<HWUPE))
|
|
//! disables host wake up interrupt detection
|
|
#define Host_disable_hwup_interrupt() (UHIEN &= ~(1<<HWUPE))
|
|
#define Is_host_hwup_interrupt_enabled() ((UHIEN & (1<<HWUPE)) ? TRUE : FALSE)
|
|
//! tests if host wake up detected
|
|
#define Host_is_hwup() ((UHINT & (1<<HWUPI)) ? TRUE : FALSE)
|
|
//! Ack host wake up detection
|
|
#define Is_host_hwup() ((UHINT & (1<<HWUPI)) ? TRUE : FALSE)
|
|
#define Host_ack_hwup() (UHINT &= ~(1<<HWUPI))
|
|
|
|
//! enables host down stream rsm sent interrupt detection
|
|
#define Host_enable_down_stream_resume_interrupt() (UHIEN |= (1<<RSMEDE))
|
|
//! disables host down stream rsm sent interrupt detection
|
|
#define Host_disable_down_stream_resume_interrupt() (UHIEN &= ~(1<<RSMEDE))
|
|
#define Is_host_down_stream_resume_interrupt_enabled() ((UHIEN & (1<<RSMEDE)) ? TRUE : FALSE)
|
|
//! Ack host down stream resume sent
|
|
#define Is_host_down_stream_resume() ((UHINT & (1<<RSMEDI)) ? TRUE : FALSE)
|
|
#define Host_ack_down_stream_resume() (UHINT &= ~(1<<RSMEDI))
|
|
|
|
//! enables host remote wake up interrupt detection
|
|
#define Host_enable_remote_wakeup_interrupt() (UHIEN |= (1<<RXRSME))
|
|
//! disables host remote wake up interrupt detection
|
|
#define Host_disable_remote_wakeup_interrupt() (UHIEN &= ~(1<<RXRSME))
|
|
#define Is_host_remote_wakeup_interrupt_enabled() ((UHIEN & (1<<RXRSME)) ? TRUE : FALSE)
|
|
//! tests if host wake up detected
|
|
#define Host_is_remote_wakeup() ((UHINT & (1<<RXRSMI)) ? TRUE : FALSE)
|
|
//! Ack host wake up detection
|
|
#define Is_host_remote_wakeup() ((UHINT & (1<<RXRSMI)) ? TRUE : FALSE)
|
|
#define Host_ack_remote_wakeup() (UHINT &= ~(1<<RXRSMI))
|
|
|
|
//! enables host device connection interrupt
|
|
#define Host_enable_device_connection_interrupt() (UHIEN |= (1<<DCONNE))
|
|
//! disables USB device connection interrupt
|
|
#define Host_disable_device_connection_interrupt() (UHIEN &= ~(1<<DCONNE))
|
|
#define Is_host_device_connection_interrupt_enabled() ((UHIEN & (1<<DCONNE)) ? TRUE : FALSE)
|
|
//! tests if a USB device has been detected
|
|
#define Is_device_connection() (UHINT & (1<<DCONNI))
|
|
//! acks device connection
|
|
#define Host_ack_device_connection() (UHINT = ~(1<<DCONNI))
|
|
|
|
//! enables host device disconnection interrupt
|
|
#define Host_enable_device_disconnection_interrupt() (UHIEN |= (1<<DDISCE))
|
|
//! disables USB device connection interrupt
|
|
#define Host_disable_device_disconnection_interrupt() (UHIEN &= ~(1<<DDISCE))
|
|
#define Is_host_device_disconnection_interrupt_enabled() ((UHIEN & (1<<DDISCE)) ? TRUE : FALSE)
|
|
//! tests if a USB device has been removed
|
|
#define Is_device_disconnection() (UHINT & (1<<DDISCI) ? TRUE : FALSE)
|
|
//! acks device disconnection
|
|
#define Host_ack_device_disconnection() (UHINT = ~(1<<DDISCI))
|
|
|
|
//! enables host USB reset interrupt
|
|
#define Host_enable_reset_interrupt() (UHIEN |= (1<<RSTE))
|
|
//! disables host USB reset interrupt
|
|
#define Host_disable_reset_interrupt() (UHIEN &= ~(1<<RSTE))
|
|
#define Is_host_reset_interrupt_enabled() ((UHIEN & (1<<RSTE)) ? TRUE : FALSE)
|
|
//! acks host USB reset sent
|
|
#define Host_ack_reset() (UHINT = ~(1<<RSTI))
|
|
//! tests if USB reset has been sent
|
|
#define Is_host_reset() Host_is_reset()
|
|
|
|
|
|
//! switches on VBus
|
|
#define Host_vbus_request() (OTGCON |= (1<<VBUSREQ))
|
|
//! switches off VBus
|
|
#define Host_clear_vbus_request() (OTGCON |= (1<<VBUSRQC))
|
|
//! configures the address to use for the device
|
|
#define Host_configure_address(addr) (UHADDR = addr & MSK_HADDR)
|
|
|
|
//! Get connected device speed, returns TRUE when in full speed mode
|
|
#define Is_host_full_speed() ((USBSTA & (1<<SPEED)) ? TRUE : FALSE)
|
|
//! @}
|
|
|
|
|
|
//! @ingroup usbdriver
|
|
//! @defgroup general_pipe USB pipe drivers
|
|
//! These macros manage the common features of the pipes.
|
|
//! @{
|
|
//! selects pipe for CPU interface
|
|
#define Host_select_pipe(p) (UPNUM = (U8)p)
|
|
|
|
//! get the currently selected pipe number
|
|
#define Host_get_selected_pipe() (UPNUM )
|
|
|
|
//! enables pipe
|
|
#define Host_enable_pipe() (UPCONX |= (1<<PEN))
|
|
//! disables pipe
|
|
#define Host_disable_pipe() (UPCONX &= ~(1<<PEN))
|
|
|
|
//! sets SETUP token
|
|
#define Host_set_token_setup() (UPCFG0X = UPCFG0X & ~MSK_TOKEN_SETUP)
|
|
//! sets IN token
|
|
#define Host_set_token_in() (UPCFG0X = (UPCFG0X & ~MSK_TOKEN_SETUP) | MSK_TOKEN_IN)
|
|
//! sets OUT token
|
|
#define Host_set_token_out() (UPCFG0X = (UPCFG0X & ~MSK_TOKEN_SETUP) | MSK_TOKEN_OUT)
|
|
|
|
//! returns the number of the endpoint associated to the current pipe
|
|
#define Host_get_endpoint_number() (UPCFG0X & (MSK_PEPNUM))
|
|
|
|
//! returns pipe interrupt register
|
|
#define Host_get_pipe_interrupt() (UPINT)
|
|
|
|
//! sets the interrupt frequency
|
|
#define Host_set_interrupt_frequency(frq) (UPCFG2X = (U8)frq)
|
|
|
|
//! tests if current pipe is configured
|
|
#define Is_pipe_configured() (UPSTAX & (1<<CFGOK))
|
|
//! tests if at least one bank is busy
|
|
#define Is_host_one_bank_busy() ((UPSTAX & (1<<MSK_NBUSYBK)) != 0)
|
|
//! returns the number of busy banks
|
|
#define Host_number_of_busy_bank() (UPSTAX & (1<<MSK_NBUSYBK))
|
|
|
|
//! resets the pipe
|
|
#define Host_reset_pipe(p) (UPRST = 1<<p , UPRST = 0)
|
|
|
|
//! writes a byte into the pipe FIFO
|
|
#define Host_write_byte(dat) (UPDATX = dat)
|
|
//! reads a byte from the pipe FIFO
|
|
#define Host_read_byte() (UPDATX)
|
|
|
|
//! freezes the pipe
|
|
#define Host_freeze_pipe() (UPCONX |= (1<<PFREEZE))
|
|
//! un-freezees the pipe
|
|
#define Host_unfreeze_pipe() (UPCONX &= ~(1<<PFREEZE))
|
|
//! tests if the current pipe is frozen
|
|
#define Is_host_pipe_freeze() (UPCONX & (1<<PFREEZE))
|
|
|
|
//! resets data toggle
|
|
#define Host_reset_pipe_data_toggle() (UPCONX |= (1<<RSTDT) )
|
|
|
|
//! tests if SETUP has been sent
|
|
#define Is_host_setup_sent() ((UPINTX & (1<<TXSTPI)) ? TRUE : FALSE)
|
|
//! tests if control IN has been received
|
|
#define Is_host_control_in_received() ((UPINTX & (1<<RXINI)) ? TRUE : FALSE)
|
|
//! tests if control OUT has been sent
|
|
#define Is_host_control_out_sent() ((UPINTX & (1<<TXOUTI)) ? TRUE : FALSE)
|
|
//! tests if a STALL has been received
|
|
#define Is_host_stall() ((UPINTX & (1<<RXSTALLI)) ? TRUE : FALSE)
|
|
//! tests if an error occurs on current pipe
|
|
#define Is_host_pipe_error() ((UPINTX & (1<<PERRI)) ? TRUE : FALSE)
|
|
//! sends a setup
|
|
#define Host_send_setup() (UPINTX &= ~(1<<FIFOCON))
|
|
//! sends a control IN
|
|
#define Host_send_control_in() (UPINTX &= ~(1<<FIFOCON))
|
|
//! sends a control OUT
|
|
#define Host_send_control_out() (UPINTX &= ~(1<<FIFOCON))
|
|
//! acks control OUT
|
|
#define Host_ack_control_out() (UPINTX &= ~(1<<TXOUTI))
|
|
//! acks control IN
|
|
#define Host_ack_control_in() (UPINTX &= ~(1<<RXINI))
|
|
//! acks setup
|
|
#define Host_ack_setup() (UPINTX &= ~(1<<TXSTPI))
|
|
//! acks STALL reception
|
|
#define Host_ack_stall() (UPINTX &= ~(1<<RXSTALLI))
|
|
|
|
//! sends a OUT
|
|
#define Host_send_out() (UPINTX &= ~(1<<FIFOCON))
|
|
//! tests if OUT has been sent
|
|
#define Is_host_out_sent() ((UPINTX & (1<<TXOUTI)) ? TRUE : FALSE)
|
|
//! acks OUT sent
|
|
#define Host_ack_out_sent() (UPINTX &= ~(1<<TXOUTI))
|
|
//! tests if IN received
|
|
#define Is_host_in_received() ((UPINTX & (1<<RXINI)) ? TRUE : FALSE)
|
|
//! acks IN reception
|
|
#define Host_ack_in_received() (UPINTX &= ~(1<<RXINI))
|
|
//! sends a IN
|
|
#define Host_send_in() (UPINTX &= ~(1<<FIFOCON))
|
|
//! tests if nak handshake has been received
|
|
#define Is_host_nak_received() ((UPINTX & (1<<NAKEDI)) ? TRUE : FALSE)
|
|
//! acks NAk received sent
|
|
#define Host_ack_nak_received() (UPINTX &= ~(1<<NAKEDI))
|
|
|
|
|
|
|
|
//! tests if endpoint read allowed
|
|
#define Is_host_read_enabled() (UPINTX&(1<<RWAL))
|
|
//! tests if endpoint read allowed
|
|
#define Is_host_write_enabled() (UPINTX&(1<<RWAL))
|
|
|
|
//! sets IN in standard mode
|
|
#define Host_standard_in_mode() (UPCONX &= ~(1<<INMODE))
|
|
//! sets IN in continuous mode
|
|
#define Host_continuous_in_mode() (UPCONX |= (1<<INMODE))
|
|
|
|
//! sets number of IN requests to perform before freeze
|
|
#define Host_in_request_number(in_num) (UPINRQX = (U8)in_num)
|
|
//! returns number of remaining IN requests
|
|
#define Host_get_in_request_number() (UPINRQX)
|
|
|
|
//! returns number of bytes (8 bits)
|
|
#define Host_data_length_U8() (UPBCLX)
|
|
//! returns number of bytes (16 bits)
|
|
#define Host_data_length_U16() ((((U16)UPBCHX)<<8) | UPBCLX)
|
|
//! for device compatibility
|
|
#define Host_byte_counter() Host_data_length_U16()
|
|
//! for device compatibility
|
|
#define Host_byte_counter_8() Host_data_length_U8()
|
|
|
|
//! returns the size of the current pipe
|
|
#define Host_get_pipe_length() ((U16)0x08 << ((UPCFG1X & MSK_PSIZE)>>4))
|
|
|
|
//! returns the type of the current pipe
|
|
#define Host_get_pipe_type() (UPCFG0X>>6)
|
|
|
|
//! tests if error occurs on pipe
|
|
#define Host_error_status() (UPERRX & MSK_ERROR)
|
|
//! acks all pipe error
|
|
#define Host_ack_all_errors() (UPERRX = 0x00)
|
|
|
|
//! Enable pipe end transmission interrupt
|
|
#define Host_enable_transmit_interrupt() (UPIENX |= (1<<TXOUTE))
|
|
//! Disable pipe end transmission interrupt
|
|
#define Host_disable_transmit_interrupt() (UPIENX &= ~(1<<TXOUTE))
|
|
|
|
//! Enable pipe reception interrupt
|
|
#define Host_enable_receive_interrupt() (UPIENX |= (1<<RXINE))
|
|
//! Disable pipe recption interrupt
|
|
#define Host_disable_receive_interrupt() (UPIENX &= ~(1<<RXINE))
|
|
|
|
//! Enable pipe stall interrupt
|
|
#define Host_enable_stall_interrupt() (UPIENX |= (1<<RXSTALLE))
|
|
//! Disable pipe stall interrupt
|
|
#define Host_disable_stall_interrupt() (UPIENX &= ~(1<<RXSTALLE))
|
|
|
|
//! Enable pipe error interrupt
|
|
#define Host_enable_error_interrupt() (UPIENX |= (1<<PERRE))
|
|
//! Disable pipe error interrupt
|
|
#define Host_disable_error_interrupt() (UPIENX &= ~(1<<PERRE))
|
|
|
|
//! Enable pipe NAK interrupt
|
|
#define Host_enable_nak_interrupt() (UPIENX |= (1<<NAKEDE))
|
|
//! Disable pipe NAK interrupt
|
|
#define Host_disable_nak_interrupt() (UPIENX &= ~(1<<NAKEDE))
|
|
|
|
#define Get_pipe_token(x) ((x & (0x80)) ? TOKEN_IN : TOKEN_OUT)
|
|
|
|
//! @}
|
|
|
|
//! wSWAP
|
|
//! This macro swaps the U8 order in words.
|
|
//!
|
|
//! @param x (U16) the 16 bit word to swap
|
|
//!
|
|
//! @return (U16) the 16 bit word x with the 2 bytes swaped
|
|
|
|
#define wSWAP(x) \
|
|
( (((x)>>8)&0x00FF) \
|
|
| (((x)<<8)&0xFF00) \
|
|
)
|
|
|
|
|
|
//! Usb_write_word_enum_struc
|
|
//! This macro help to fill the U16 fill in USB enumeration struct.
|
|
//! Depending on the CPU architecture, the macro swap or not the nibbles
|
|
//!
|
|
//! @param x (U16) the 16 bit word to be written
|
|
//!
|
|
//! @return (U16) the 16 bit word written
|
|
#if !defined(BIG_ENDIAN) && !defined(LITTLE_ENDIAN)
|
|
#error YOU MUST Define the Endian Type of target: LITTLE_ENDIAN or BIG_ENDIAN
|
|
#endif
|
|
#ifdef LITTLE_ENDIAN
|
|
#define Usb_write_word_enum_struc(x) (x)
|
|
#else //BIG_ENDIAN
|
|
#define Usb_write_word_enum_struc(x) (wSWAP(x))
|
|
#endif
|
|
|
|
|
|
//_____ D E C L A R A T I O N ______________________________________________
|
|
|
|
U8 usb_config_ep (U8, U8);
|
|
U8 usb_select_enpoint_interrupt (void);
|
|
U8 usb_send_packet (U8 , U8*, U8);
|
|
U8 usb_read_packet (U8 , U8*, U8);
|
|
void usb_halt_endpoint (U8);
|
|
U8 usb_init_device (void);
|
|
|
|
U8 host_config_pipe (U8, U8);
|
|
U8 host_determine_pipe_size (U16);
|
|
void host_disable_all_pipe (void);
|
|
U8 usb_get_nb_pipe_interrupt (void);
|
|
|
|
#endif // _USB_DRV_H_
|
|
|
|
/** @} */
|