Michael LeMay c815fa4511 x86: Use shared ISR for I2C and GPIO ... This patch permits interrupts to be generated by both the I2C and GPIO controllers for simultaneously-executing applications. The controllers share a single interrupt pin, INTC. Prior to this patch, quarkX1000_gpio_init() routed INTA to PIRQC and IRQ 10 (due to an incorrect assumption that INTA is connected to the GPIO controller), and quarkX1000_i2c_init() routed INTC to PIRQC and IRQ 9. The I2C controller initialization is a prerequisite for GPIO initialization, so the final configuration was that INTA and INTC were both routed to PIRQC and IRQ 10. Thus, only the GPIO ISR was being invoked, even if the I2C controller was actually responsible for the interrupt. This patch refactors the I2C and GPIO ISR setup and handler code so that the shared portions are combined in cpu/x86/drivers/legacy_pc/shared-isr.[ch]. The I2C and GPIO drivers communicate their interrupt information to the shared component by placing structures in a specific section of the binary.		2016-02-16 21:19:44 -08:00
..
nmi.c
nmi.h
pci.c	x86: Add driver for Intel Quark X1000 built-in Ethernet	2015-12-21 08:06:14 -02:00
pci.h	x86: Add support for PCI BAR1	2015-12-21 08:06:14 -02:00
pic.c
pic.h
pit.c
pit.h
rtc.c
rtc.h
shared-isr.c	x86: Use shared ISR for I2C and GPIO	2016-02-16 21:19:44 -08:00
shared-isr.h	x86: Use shared ISR for I2C and GPIO	2016-02-16 21:19:44 -08:00
uart-16x50.c	x86: Add support for PCI BAR1	2015-12-21 08:06:14 -02:00
uart-16x50.h	x86: Add driver for MMIO-accessible 16X50 UART	2015-12-21 08:06:14 -02:00