mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-15 00:29:02 +00:00
208 lines
6.0 KiB
Makefile
208 lines
6.0 KiB
Makefile
|
|
CONTIKI_TARGET_DIRS = .
|
|
|
|
|
|
ifeq ($(USE_SENSOR_BOARD),1)
|
|
COMPILE_SENSORS=TRUE
|
|
CFLAGS += -DCOMPILE_SENSORS
|
|
${info Compiling with Sensor Files}
|
|
else
|
|
COMPILE_SENSORS=FALSE
|
|
${info NOT compiling Sensor Files}
|
|
endif
|
|
|
|
|
|
ifeq ($(USE_SUBGHZ_BOARD),IDS01A4)
|
|
CFLAGS += -DX_NUCLEO_IDS01A4
|
|
${info Using 868 MHz SPIRIT1 Board}
|
|
else ifeq ($(USE_SUBGHZ_BOARD),IDS01A5)
|
|
CFLAGS += -DX_NUCLEO_IDS01A5
|
|
${info Using 915 MHz SPIRIT1 Board}
|
|
else
|
|
${info You must specify which SPIRIT1 board you use:}
|
|
${info make USE_SUBGHZ_BOARD=IDS01A4 for 868 MHz}
|
|
${info make USE_SUBGHZ_BOARD=IDS01A5 for 915 MHz}
|
|
${error }
|
|
endif
|
|
|
|
|
|
#Currently we support only GCC
|
|
GCC=1
|
|
|
|
CONTIKI_TARGET_DIRS += stm32cube-hal/Src
|
|
CONTIKI_TARGET_DIRS += dev
|
|
CONTIKI_TARGET_DIRS += drivers/stm32l1xx_nucleo
|
|
CONTIKI_TARGET_DIRS += drivers/x_nucleo_ids01ax
|
|
CONTIKI_TARGET_DIRS += drivers/Common
|
|
CONTIKI_TARGET_DIRS += drivers/spirit1/src drivers/spirit1/inc
|
|
|
|
ifeq ($(COMPILE_SENSORS),TRUE)
|
|
CONTIKI_TARGET_DIRS += drivers/x_nucleo_iks01a1
|
|
CONTIKI_TARGET_DIRS += drivers/sensors/hts221 drivers/sensors/lps25h drivers/sensors/lps25hb\
|
|
drivers/sensors/lsm6ds0 drivers/sensors/lsm6ds3 drivers/sensors/lis3mdl
|
|
endif
|
|
|
|
|
|
ARCH_DEV = button-sensor.c leds-arch.c
|
|
|
|
ARCH_DEV_SENSORS = temperature-sensor.c humidity-sensor.c pressure-sensor.c magneto-sensor.c acceleration-sensor.c gyroscope-sensor.c
|
|
|
|
ARCH_NUCLEOSPIRIT1 = contiki-spirit1-main.c uart-msg.c spirit1-arch.c spirit1.c node-id.c
|
|
|
|
ARCH_NUCLEOSPIRIT1_STM32CUBEHAL = spirit1_appli.c stm32l1xx_hal_msp.c stm32l1xx_it.c stm32cube_hal_init.c
|
|
|
|
ARCH_DRIVERS_STM32L1xx = stm32l1xx_nucleo.c
|
|
|
|
ARCH_DRIVERS_IDS01AX = radio_gpio.c radio_shield_config.c radio_spi.c
|
|
|
|
ARCH_DRIVERS_SPIRIT1 = \
|
|
SPIRIT1_Util.c \
|
|
SPIRIT_Aes.c \
|
|
SPIRIT_Calibration.c \
|
|
SPIRIT_Commands.c \
|
|
SPIRIT_Csma.c \
|
|
SPIRIT_DirectRF.c \
|
|
SPIRIT_General.c \
|
|
SPIRIT_Gpio.c \
|
|
SPIRIT_Irq.c \
|
|
SPIRIT_LinearFifo.c \
|
|
SPIRIT_Management.c \
|
|
SPIRIT_PktBasic.c \
|
|
SPIRIT_PktCommon.c \
|
|
SPIRIT_PktMbus.c \
|
|
SPIRIT_PktStack.c \
|
|
SPIRIT_Qi.c \
|
|
SPIRIT_Radio.c \
|
|
SPIRIT_Timer.c \
|
|
SPIRIT_Types.c
|
|
|
|
ARCH_DRIVERS_IKS01A1 = x_nucleo_iks01a1.c x_nucleo_iks01a1_hum_temp.c x_nucleo_iks01a1_imu_6axes.c \
|
|
x_nucleo_iks01a1_magneto.c x_nucleo_iks01a1_pressure.c
|
|
|
|
ARCH_DRIVERS_SENSORS = hts221.c \
|
|
lis3mdl.c \
|
|
lps25h.c \
|
|
lps25hb.c \
|
|
lsm6ds0.c \
|
|
lsm6ds3.c
|
|
|
|
ARCH+=$(ARCH_DEV)
|
|
ARCH+=$(ARCH_NUCLEOSPIRIT1)
|
|
ARCH+=$(ARCH_NUCLEOSPIRIT1_STM32CUBEHAL)
|
|
ARCH+=$(ARCH_DRIVERS_STM32L1xx)
|
|
ARCH+=$(ARCH_DRIVERS_IDS01AX)
|
|
ARCH+=$(ARCH_DRIVERS_SPIRIT1)
|
|
|
|
ifeq ($(COMPILE_SENSORS),TRUE)
|
|
ARCH+=$(ARCH_DEV_SENSORS)
|
|
ARCH+=$(ARCH_DRIVERS_IKS01A1)
|
|
ARCH+=$(ARCH_DRIVERS_SENSORS)
|
|
endif
|
|
|
|
CFLAGS += -DUSE_STM32L152_EVAL \
|
|
-DSTM32L152xE \
|
|
-DUSE_STM32L1XX_NUCLEO \
|
|
-DUSE_HAL_DRIVER \
|
|
-DUSE_STDPERIPH_DRIVER \
|
|
-DNO_EEPROM \
|
|
-DSPIRIT1_ST_SHIELD \
|
|
-DSPIRIT_MODULE \
|
|
-DUSE_SPIRIT1_DEFAULT
|
|
|
|
CFLAGS += -I. \
|
|
-I$(CONTIKI)/platform/$(TARGET)/ \
|
|
-I$(CONTIKI)/platform/$(TARGET)/stm32cube-hal/Inc \
|
|
-I$(CONTIKI)/platform/$(TARGET)/drivers/Common \
|
|
-I$(CONTIKI)/platform/$(TARGET)/divers/x_nucleo_ids01ax\
|
|
-I$(CONTIKI)/platform/$(TARGET)/drivers/spirit1/inc \
|
|
-I$(CONTIKI)/cpu/arm/stm32l152/CMSIS \
|
|
-I$(CONTIKI)/platform/$(TARGET)/drvers/stm32l1xx_nucleo \
|
|
-I$(CONTIKI)/cpu/arm/stm32l152/STM32L1xx_HAL_Driver/Inc \
|
|
-I$(CONTIKI)/cpu/arm/stm32l152 \
|
|
-I$(CONTIKI)/core \
|
|
-I$(CONTIKI)/platform/$(TARGET)/dev
|
|
|
|
|
|
ifdef UIP_CONF_IPV6
|
|
CFLAGS += -DWITH_UIP6=1
|
|
endif
|
|
|
|
|
|
ifndef CONTIKI_TARGET_MAIN
|
|
CONTIKI_TARGET_MAIN = contiki-spirit1-main.c
|
|
endif
|
|
|
|
CONTIKI_TARGET_SOURCEFILES += $(ARCH) $(CONTIKI_TARGET_MAIN)
|
|
|
|
MCU=stm32l152
|
|
CONTIKI_CPU=$(CONTIKI)/cpu/arm/stm32l152
|
|
include $(CONTIKI)/cpu/arm/stm32l152/Makefile.stm32l152
|
|
|
|
|
|
MODULES+=core/net \
|
|
core/net/mac core/net/mac/contikimac \
|
|
core/net/llsec
|
|
|
|
|
|
# build rules ------------------------------------
|
|
|
|
CLEAN += *.stm32nucleo-spirit1 symbols.c symbols.h contiki-stm32nucleo-spirit1.log
|
|
|
|
contiki-$(TARGET).a: ${addprefix $(OBJECTDIR)/,symbols.o}
|
|
|
|
help:
|
|
@echo A few useful make commands:
|
|
@echo make help - shows this help
|
|
@echo make TARGET=stm32nucleo-spirit1 savetarget - stores selection of target to avoid using TARGET= on every make invokation
|
|
@echo make program.upload - compiles and uploads program to connected board
|
|
@echo make program.upload IAR=1 - uses the IAR compiler instead of gcc (not implemented yet)
|
|
@echo make program.upload NODEID=x - uploads with node_id set to x
|
|
|
|
# Serialdump rules
|
|
ifeq ($(HOST_OS),Windows)
|
|
SERIALDUMP = serialdump-windows
|
|
# this ID is a string with which the node identifies itself as, and is used to
|
|
# find the proper /dev/comX-port in Cygwin to connect to.
|
|
CYGWIN_DEV_ID="stm32nucleo-spirit1 Spirit1 Platform"
|
|
# include $(CONTIKI)/tools/cygwin/Makefile.cygwin
|
|
endif
|
|
ifeq ($(HOST_OS),Darwin)
|
|
SERIALDUMP = serialdump-macos
|
|
endif
|
|
ifndef SERIALDUMP
|
|
# Assume Linux
|
|
SERIALDUMP = serialdump-linux
|
|
endif
|
|
|
|
# IAR/windows/cygwin only for now; after GCC port, see if stm32flash works with Linux
|
|
STLINKCLI=ST-LINK_CLI.exe
|
|
%.upload: %.hex
|
|
#Note: this command only uploads to a single connected device
|
|
#$(STLINKCLI) -ME || $(STLINKCLI) -ME || $(STLINKCLI) -ME || $(STLINKCLI) -ME
|
|
$(STLINKCLI) -Q -P $*.hex -V -Run
|
|
|
|
|
|
# devcon requires WinDriverKit, downloadable from microsoft.com
|
|
DEVCON=devcon.exe
|
|
DEVCON_ALLDEVS=$(shell $(DEVCON) find =USB | grep "STMicroelectronics STLink dongle" | cut -d " " -f 1)
|
|
devcon_enableonly:
|
|
devcon disable =USB @"USB\VID_0483&PID_3748\*"
|
|
devcon enable =USB @"$(ID)"
|
|
|
|
%.uploadall: %.hex
|
|
$(foreach D,$(DEVCON_ALLDEVS), echo D IS "$(D)" && make devcon_enableonly ID="$(D)" && make $*.upload && ) echo "Done"
|
|
devcon enable =USB @"USB\VID_0483&PID_3748\*"
|
|
|
|
login:
|
|
@echo "Connecting to $(COMPORT)"
|
|
$(CONTIKI)/tools/sky/$(SERIALDUMP) -b115200 $(COMPORT)
|
|
|
|
%.ramusage: %.$(TARGET)
|
|
$(NM) -S $< --size-sort --line-numbers | grep -v " T " | grep -v " t "
|
|
%.romusage: %.$(TARGET)
|
|
$(NM) -S $< --size-sort --line-numbers | grep -v " b " | grep -v " B " | grep -v " d " | grep -v " D "
|
|
|
|
|
|
|
|
|