mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-11-11 12:05:53 +00:00
90 lines
3.2 KiB
Makefile
90 lines
3.2 KiB
Makefile
# Sensinode CC2430 platform makefile
|
|
# Supported products: N100, N600, N601, N710, N711
|
|
# Support for N740 is experimental.
|
|
|
|
# We support defines for product models using the following format
|
|
# e.g. MODEL_N601. Run make TARGET=sensinode DEFINES=MODEL_N601 to
|
|
# automatically configure the correct LED, button, UART etc. settings
|
|
# for that product model. If undefined, MODEL_N100 is chosen by default.
|
|
# Model settings are defined in /dev/models.h
|
|
|
|
# make sensinode.upload - Will use nano_programmer to upload file using D2xx Devboard
|
|
# make sensinode.serialdump - Will use the Contiki serialdump tool on the default UART
|
|
# make foo.model - Will copy foo.ihx to foo-XYZ.ihx (e.g. foo-n740.ihx)
|
|
PATH:=$(CONTIKI)/platform/$(TARGET)/tools/bin:$(PATH)
|
|
export PATH
|
|
|
|
ifndef CONTIKI
|
|
$(error CONTIKI not defined! You must specify where CONTIKI resides!)
|
|
endif
|
|
|
|
# Determine our model and (later on) add it as part of the .ihx filename
|
|
# Handy when building for various models so we can easily tell which ihx
|
|
# is for what model.
|
|
# Defaults to N100 (which is what the contiki code does as well)
|
|
MODEL_SUFFIX=n100
|
|
ifdef DEFINES
|
|
MODEL_SUFFIX=$(patsubst MODEL_N%,n%, \
|
|
$(filter MODEL_%,$(subst $(COMMA), ,$(DEFINES))))
|
|
endif
|
|
|
|
# Define the default UART for tools and tool commands
|
|
DEFUART = /dev/ttyUSB0
|
|
PROG = $(CONTIKI)/tools/sensinode/nano_programmer/nano_programmer -d $(DEFUART)
|
|
SERIALDUMP = $(CONTIKI)/tools/sky/serialdump-linux -b115200 $(DEFUART)
|
|
|
|
CONTIKI_TARGET_DIRS = . dev
|
|
CONTIKI_TARGET_MAIN = $(addprefix $(OBJECTDIR)/,contiki-sensinode-main.rel)
|
|
|
|
CONTIKI_TARGET_SOURCEFILES = contiki-sensinode-main.c
|
|
CONTIKI_TARGET_SOURCEFILES += leds.c leds-arch.c serial-line.c sensors.c
|
|
CONTIKI_TARGET_SOURCEFILES += sensinode-sensors.c button-sensor.c adc-sensor.c
|
|
CONTIKI_TARGET_SOURCEFILES += n740.c models.c m25p16.c slip-arch.c slip.c
|
|
CONTIKI_TARGET_SOURCEFILES += putchar.c debug.c
|
|
|
|
CONTIKI_SOURCEFILES += $(CONTIKI_TARGET_SOURCEFILES)
|
|
|
|
CLEAN += *.sensinode
|
|
|
|
ifeq ($(UIP_CONF_IPV6),1)
|
|
ifeq ($(OFFSET_FIRMWARE),1)
|
|
CFLAGS += -DDISCO_ENABLED=1
|
|
CONTIKI_TARGET_SOURCEFILES += disco.c
|
|
endif
|
|
CONTIKI_TARGET_SOURCEFILES += viztool.c
|
|
endif
|
|
|
|
FORCE:
|
|
|
|
# .sensinode target so we can behave similar to other targets
|
|
# Lastly, it will create a %-$(MODEL).ihx file
|
|
%.$(TARGET): %.hex FORCE
|
|
cp $< $(<:.hex=.$(TARGET))
|
|
if [ -f $(<:.hex=.ihx) ] ; then \
|
|
cp $(<:.hex=.ihx) $(<:.hex=-$(MODEL_SUFFIX).ihx); fi
|
|
@echo "\nReport"
|
|
@echo "==============="
|
|
@echo 'Code footprint:'
|
|
@echo 'Area Addr Size' \
|
|
' Decimal'
|
|
@echo '---------------------------------- -------- --------' \
|
|
' --------'
|
|
@echo -n 'HOME,CSEG,CONST,XINIT,GS* $(HOME_START) '
|
|
@egrep ',CODE\)' $(<:.hex=.map) | egrep -v '(^BANK[1-9][^=])' | uniq | \
|
|
awk '{ SUM += $$5 } END { printf "%08X = %8d", SUM, SUM }'
|
|
@echo '. bytes (REL,CON,CODE)'
|
|
@egrep '(^BANK[1-9][^=])' $(<:.hex=.map) | uniq | sort
|
|
@egrep -A 5 'Other memory' $(<:.hex=.mem)
|
|
|
|
%.upload: %.hex
|
|
$(PROG) -P $<
|
|
|
|
sensinode.serialdump:
|
|
$(SERIALDUMP)
|
|
|
|
### Define the CPU directory
|
|
CONTIKI_CPU=$(CONTIKI)/cpu/cc2430
|
|
include $(CONTIKI)/cpu/cc2430/Makefile.cc2430
|
|
|
|
contiki-$(TARGET).a:# $(addprefix $(OBJECTDIR)/,symbols.rel)
|