mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-14 09:28:59 +00:00
674 lines
36 KiB
C
674 lines
36 KiB
C
/*
|
||
* Copyright (c) 2011, George Oikonomou - <oikonomou@users.sourceforge.net>
|
||
* All rights reserved.
|
||
*
|
||
* Redistribution and use in source and binary forms, with or without
|
||
* modification, are permitted provided that the following conditions
|
||
* are met:
|
||
* 1. Redistributions of source code must retain the above copyright
|
||
* notice, this list of conditions and the following disclaimer.
|
||
* 2. Redistributions in binary form must reproduce the above copyright
|
||
* notice, this list of conditions and the following disclaimer in the
|
||
* documentation and/or other materials provided with the distribution.
|
||
* 3. Neither the name of the Institute nor the names of its contributors
|
||
* may be used to endorse or promote products derived from this software
|
||
* without specific prior written permission.
|
||
*
|
||
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||
* SUCH DAMAGE.
|
||
*
|
||
* This file is part of the Contiki operating system.
|
||
*/
|
||
|
||
/**
|
||
* \file
|
||
* Definitions for TI/Chipcon cc2530, cc2531 and cc2533 SFR registers.
|
||
*
|
||
* Based on information in:
|
||
* "CC253x System-on-Chip Solution for 2.4-GHz IEEE 802.15.4 and ZigBee®
|
||
* Applications"
|
||
* Literature Number: SWRU191B. April 2009–Revised September 2010
|
||
*
|
||
* \author
|
||
* George Oikonomou - <oikonomou@users.sourceforge.net>
|
||
*/
|
||
|
||
#ifndef CC253X_H_
|
||
#define CC253X_H_
|
||
|
||
/*---------------------------------------------------------------------------*/
|
||
/* Compiler Abstraction */
|
||
#include <compiler.h>
|
||
/*---------------------------------------------------------------------------
|
||
* Interrupt Vectors
|
||
* (Table 2.5, page 40)
|
||
*---------------------------------------------------------------------------*/
|
||
#define RFERR_VECTOR 0 /* RF TXFIFO underflow and RXFIFO overflow. */
|
||
#define ADC_VECTOR 1 /* ADC end of conversion */
|
||
#define URX0_VECTOR 2 /* USART 0 RX complete */
|
||
#define URX1_VECTOR 3 /* USART 1 RX complete */
|
||
#define ENC_VECTOR 4 /* AES encryption/decryption complete */
|
||
#define ST_VECTOR 5 /* Sleep Timer compare */
|
||
#define P2INT_VECTOR 6 /* Port 2 inputs/USB/I2C */
|
||
#define UTX0_VECTOR 7 /* USART 0 TX complete */
|
||
#define DMA_VECTOR 8 /* DMA transfer complete */
|
||
#define T1_VECTOR 9 /* Timer 1 (16-bit) capture/compare/overflow */
|
||
#define T2_VECTOR 10 /* Timer 2 (MAC Timer) */
|
||
#define T3_VECTOR 11 /* Timer 3 (8-bit) compare/overflow */
|
||
#define T4_VECTOR 12 /* Timer 4 (8-bit) compare/overflow */
|
||
#define P0INT_VECTOR 13 /* Port 0 inputs */
|
||
#define UTX1_VECTOR 14 /* USART1 TX complete */
|
||
#define P1INT_VECTOR 15 /* Port 1 inputs */
|
||
#define RF_VECTOR 16 /* RF general interrupts */
|
||
#define WDT_VECTOR 17 /* Watchdog overflow in timer mode */
|
||
/*---------------------------------------------------------------------------
|
||
* Special Function Registers and BITs
|
||
* (Table 2.1, page 27)
|
||
*---------------------------------------------------------------------------*/
|
||
/* 8051 Internals */
|
||
SFR(P0, 0x80); /* Port 0 */
|
||
SBIT(P0_7, 0x80, 7); /* Port 0 bit 7 */
|
||
SBIT(P0_6, 0x80, 6); /* Port 0 bit 6 */
|
||
SBIT(P0_5, 0x80, 5); /* Port 0 bit 5 */
|
||
SBIT(P0_4, 0x80, 4); /* Port 0 bit 4 */
|
||
SBIT(P0_3, 0x80, 3); /* Port 0 bit 3 */
|
||
SBIT(P0_2, 0x80, 2); /* Port 0 bit 2 */
|
||
SBIT(P0_1, 0x80, 1); /* Port 0 bit 1 */
|
||
SBIT(P0_0, 0x80, 0); /* Port 0 bit 0 */
|
||
SFR(SP, 0x81); /* Stack pointer */
|
||
SFR(DPL0, 0x82); /* Data pointer 0 low byte */
|
||
SFR(DPH0, 0x83); /* Data pointer 0 high byte */
|
||
SFR(DPL1, 0x84); /* Data pointer 1 low byte */
|
||
SFR(DPH1, 0x85); /* Data pointer 1 high byte */
|
||
SFR(PCON, 0x87); /* Power mode control */
|
||
SFR(TCON, 0x88); /* Interrupt flags */
|
||
SBIT(URX1IF, 0x88, 7); /* USART1 RX interrupt flag */
|
||
SBIT(ADCIF, 0x88, 5); /* ADC interrupt flag */
|
||
SBIT(URX0IF, 0x88, 3); /* USART0 RX interrupt flag */
|
||
SBIT(IT1, 0x88, 2); /* Reserved. Must always be set to 1 */
|
||
SBIT(RFERRIF, 0x88, 1); /* RF TXFIFO/RXFIFO interrupt flag */
|
||
SBIT(IT0, 0x88, 0); /* Reserved. Must always be set to 1 */
|
||
SFR(P1, 0x90); /* Port 1 */
|
||
SBIT(P1_7, 0x90, 7); /* Port 1 bit 7 */
|
||
SBIT(P1_6, 0x90, 6); /* Port 1 bit 6 */
|
||
SBIT(P1_5, 0x90, 5); /* Port 1 bit 5 */
|
||
SBIT(P1_4, 0x90, 4); /* Port 1 bit 4 */
|
||
SBIT(P1_3, 0x90, 3); /* Port 1 bit 3 */
|
||
SBIT(P1_2, 0x90, 2); /* Port 1 bit 2 */
|
||
SBIT(P1_1, 0x90, 1); /* Port 1 bit 1 */
|
||
SBIT(P1_0, 0x90, 0); /* Port 1 bit 0 */
|
||
SFR(DPS, 0x92); /* Data pointer select */
|
||
SFR(S0CON, 0x98); /* Interrupt flags 2 */
|
||
SBIT(ENCIF_1, 0x98, 1); /* AES Interrupt flag 1 */
|
||
SBIT(ENCIF_0, 0x98, 0); /* AES Interrupt flag 0 */
|
||
SFR(IEN2, 0x9A); /* Interrupt enable 2 */
|
||
SFR(S1CON, 0x9B); /* Interrupt flags 3 */
|
||
SFR(P2, 0xA0); /* Port 2 */
|
||
SBIT(P2_7, 0xA0, 7); /* Port 2 bit 7 */
|
||
SBIT(P2_6, 0xA0, 6); /* Port 2 bit 6 */
|
||
SBIT(P2_5, 0xA0, 5); /* Port 2 bit 5 */
|
||
SBIT(P2_4, 0xA0, 4); /* Port 2 bit 4 */
|
||
SBIT(P2_3, 0xA0, 3); /* Port 2 bit 3 */
|
||
SBIT(P2_2, 0xA0, 2); /* Port 2 bit 2 */
|
||
SBIT(P2_1, 0xA0, 1); /* Port 2 bit 1 */
|
||
SBIT(P2_0, 0xA0, 0); /* Port 2 bit 0 */
|
||
SFR(IEN0, 0xA8); /* Interrupt enable 0 */
|
||
SBIT(EA, 0xA8, 7); /* All interrupts - enable/disable */
|
||
SBIT(STIE, 0xA8, 5); /* Sleep Timer interrupt enable */
|
||
SBIT(ENCIE, 0xA8, 4); /* AES encryption/decryption interrupt enable */
|
||
SBIT(URX1IE, 0xA8, 3); /* USART1 RX interrupt enable */
|
||
SBIT(URX0IE, 0xA8, 2); /* USART0 RX interrupt enable */
|
||
SBIT(ADCIE, 0xA8, 1); /* ADC interrupt enable */
|
||
SBIT(RFERRIE, 0xA8, 0); /* RF TXFIFO/RXFIFO interrupt enable */
|
||
SFR(IP0, 0xA9); /* Interrupt priority 0 */
|
||
SFR(IEN1, 0xB8); /* Interrupt enable 1 */
|
||
SBIT(P0IE, 0xB8, 5); /* Port 0 interrupt enable */
|
||
SBIT(T4IE, 0xB8, 4); /* Timer 4 interrupt enable */
|
||
SBIT(T3IE, 0xB8, 3); /* Timer 3 interrupt enable */
|
||
SBIT(T2IE, 0xB8, 2); /* Timer 2 interrupt enable */
|
||
SBIT(T1IE, 0xB8, 1); /* Timer 1 interrupt enable */
|
||
SBIT(DMAIE, 0xB8, 0); /* DMA Transfer interrupt enable */
|
||
SFR(IP1, 0xB9); /* Interrupt priority 1 */
|
||
SFR(IRCON, 0xC0); /* Interrupt flags 4 */
|
||
SBIT(STIF, 0xC0, 7); /* Sleep Timer interrupt flag */
|
||
SBIT(P0IF, 0xC0, 5); /* Port 0 interrupt flag */
|
||
SBIT(T4IF, 0xC0, 4); /* Timer 4 interrupt flag */
|
||
SBIT(T3IF, 0xC0, 3); /* Timer 3 interrupt flag */
|
||
SBIT(T2IF, 0xC0, 2); /* Timer 2 interrupt flag */
|
||
SBIT(T1IF, 0xC0, 1); /* Timer 1 interrupt flag */
|
||
SBIT(DMAIF, 0xC0, 0); /* DMA-complete interrupt flag */
|
||
SFR(PSW, 0xD0); /* Program status word */
|
||
SBIT(CY, 0xD0, 7); /* Carry flag */
|
||
SBIT(AC, 0xD0, 6); /* Auxiliary carry flag */
|
||
SBIT(F0, 0xD0, 5); /* User-defined flag 1, bit addressable */
|
||
SBIT(RS1, 0xD0, 4); /* Register bank select, bit 1 */
|
||
SBIT(RS0, 0xD0, 3); /* Register bank select, bit 0 */
|
||
SBIT(OV, 0xD0, 2); /* Overflow flag */
|
||
SBIT(F1, 0xD0, 1); /* User-defined flag 0, bit addressable */
|
||
SBIT(P, 0xD0, 0); /* Parity flag */
|
||
SFR(ACC, 0xE0); /* Accumulator */
|
||
SBIT(ACC_7, 0xE0, 7); /* Accumulator bit 7 */
|
||
SBIT(ACC_6, 0xE0, 6); /* Accumulator bit 6 */
|
||
SBIT(ACC_5, 0xE0, 5); /* Accumulator bit 5 */
|
||
SBIT(ACC_4, 0xE0, 4); /* Accumulator bit 4 */
|
||
SBIT(ACC_3, 0xE0, 3); /* Accumulator bit 3 */
|
||
SBIT(ACC_2, 0xE0, 2); /* Accumulator bit 2 */
|
||
SBIT(ACC_1, 0xE0, 1); /* Accumulator bit 1 */
|
||
SBIT(ACC_0, 0xE0, 0); /* Accumulator bit 0 */
|
||
SFR(IRCON2, 0xE8); /* Interrupt flags 5 */
|
||
SBIT(WDTIF, 0xE8, 4); /* Watchdog Timer interrupt flag */
|
||
SBIT(P1IF, 0xE8, 3); /* Port 1 Interrupt flag */
|
||
SBIT(UTX1IF, 0xE8, 2); /* USART1 TX interrupt flag */
|
||
SBIT(UTX0IF, 0xE8, 1); /* USART0 TX interrupt flag */
|
||
SBIT(P2IF, 0xE8, 0); /* Port 2 interrupt flag */
|
||
SFR(B, 0xF0); /* B Register */
|
||
SBIT(B_7, 0xF0, 7); /* Register B bit 7 */
|
||
SBIT(B_6, 0xF0, 6); /* Register B bit 6 */
|
||
SBIT(B_5, 0xF0, 5); /* Register B bit 5 */
|
||
SBIT(B_4, 0xF0, 4); /* Register B bit 4 */
|
||
SBIT(B_3, 0xF0, 3); /* Register B bit 3 */
|
||
SBIT(B_2, 0xF0, 2); /* Register B bit 2 */
|
||
SBIT(B_1, 0xF0, 1); /* Register B bit 1 */
|
||
SBIT(B_0, 0xF0, 0); /* Register B bit 0 */
|
||
|
||
/* ADC */
|
||
SFR(ADCCON1, 0xB4); /* ADC control 1 */
|
||
SFR(ADCCON2, 0xB5); /* ADC control 2 */
|
||
SFR(ADCCON3, 0xB6); /* ADC control 3 */
|
||
SFR(ADCL, 0xBA); /* ADC data low */
|
||
SFR(ADCH, 0xBB); /* ADC data high */
|
||
SFR(RNDL, 0xBC); /* Random number generator data low */
|
||
SFR(RNDH, 0xBD); /* Random number generator data high */
|
||
|
||
/* AES Coprocessor */
|
||
SFR(ENCDI, 0xB1); /* Encryption/decryption input data */
|
||
SFR(ENCDO, 0xB2); /* Encryption/decryption output data */
|
||
SFR(ENCCS, 0xB3); /* Encryption/decryption control and status */
|
||
|
||
/* DMA Controller */
|
||
SFR(DMAIRQ, 0xD1); /* DMA interrupt flag */
|
||
SFR(DMA1CFGL, 0xD2); /* DMA channel 1–4 configuration address low */
|
||
SFR(DMA1CFGH, 0xD3); /* DMA channel 1–4 configuration address high */
|
||
SFR(DMA0CFGL, 0xD4); /* DMA channel 0 configuration address low */
|
||
SFR(DMA0CFGH, 0xD5); /* DMA channel 0 configuration address high */
|
||
SFR(DMAARM, 0xD6); /* DMA channel armed */
|
||
SFR(DMAREQ, 0xD7); /* DMA channel start request and status */
|
||
|
||
/* I/O */
|
||
SFR(P0IFG, 0x89); /* Port 0 interrupt status flag */
|
||
SFR(P1IFG, 0x8A); /* Port 1 interrupt status flag */
|
||
SFR(P2IFG, 0x8B); /* Port 2 interrupt status flag */
|
||
SFR(PICTL, 0x8C); /* Port pins interrupt mask and edge */
|
||
SFR(P0IEN, 0xAB); /* Port 0 interrupt mask */
|
||
SFR(P1IEN, 0x8D); /* Port 1 interrupt mask */
|
||
SFR(P2IEN, 0xAC); /* Port 2 interrupt mask */
|
||
SFR(P0INP, 0x8F); /* Port 0 input Mode */
|
||
SFR(PERCFG, 0xF1); /* Peripheral I/O control */
|
||
SFR(APCFG, 0xF2); /* Analog peripheral I/O configuration */
|
||
SFR(P0SEL, 0xF3); /* Port 0 function select */
|
||
SFR(P1SEL, 0xF4); /* Port 1 function select */
|
||
SFR(P2SEL, 0xF5); /* Port 2 function select */
|
||
SFR(P1INP, 0xF6); /* Port 1 input mode */
|
||
SFR(P2INP, 0xF7); /* Port 2 input mode */
|
||
SFR(P0DIR, 0xFD); /* Port 0 direction */
|
||
SFR(P1DIR, 0xFE); /* Port 1 direction */
|
||
SFR(P2DIR, 0xFF); /* Port 2 direction */
|
||
SFR(PMUX, 0xAE); /* Power-down signal mux */
|
||
|
||
/* Memory */
|
||
SFR(MPAGE, 0x93); /* Memory page select */
|
||
SFR(_XPAGE, 0x93); /* Memory page select - SDCC name */
|
||
SFR(MEMCTR, 0xC7); /* Memory system control */
|
||
SFR(FMAP, 0x9F); /* Flash-memory bank mapping */
|
||
SFR(PSBANK, 0x9F); /* Flash-memory bank mapping - SDCC name */
|
||
|
||
/* RF */
|
||
SFR(RFIRQF1, 0x91); /* RF interrupt flags MSB */
|
||
SFR(RFD, 0xD9); /* RF data */
|
||
SFR(RFST, 0xE1); /* RF command strobe */
|
||
SFR(RFIRQF0, 0xE9); /* RF interrupt flags LSB */
|
||
SFR(RFERRF, 0xBF); /* RF error interrupt flags */
|
||
|
||
/* Sleep Timer */
|
||
SFR(ST0, 0x95); /* Sleep Timer 0 */
|
||
SFR(ST1, 0x96); /* Sleep Timer 1 */
|
||
SFR(ST2, 0x97); /* Sleep Timer 2 */
|
||
SFR(STLOAD, 0xAD); /* Sleep-timer load status */
|
||
SFR(SLEEPCMD, 0xBE); /* Sleep-mode control command */
|
||
SFR(SLEEPSTA, 0x9D); /* Sleep-mode control status */
|
||
|
||
/* Power Management and Clocks */
|
||
SFR(CLKCONCMD, 0xC6); /* Clock control command */
|
||
SFR(CLKCONSTA, 0x9E); /* Clock control status */
|
||
|
||
/* Timer 1 */
|
||
SFR(T1CC0L, 0xDA); /* Timer 1 channel 0 capture/compare value low */
|
||
SFR(T1CC0H, 0xDB); /* Timer 1 channel 0 capture/compare value high */
|
||
SFR(T1CC1L, 0xDC); /* Timer 1 channel 1 capture/compare value low */
|
||
SFR(T1CC1H, 0xDD); /* Timer 1 channel 1 capture/compare value high */
|
||
SFR(T1CC2L, 0xDE); /* Timer 1 channel 2 capture/compare value low */
|
||
SFR(T1CC2H, 0xDF); /* Timer 1 channel 2 capture/compare value high */
|
||
SFR(T1CNTL, 0xE2); /* Timer 1 counter low */
|
||
SFR(T1CNTH, 0xE3); /* Timer 1 counter high */
|
||
SFR(T1CTL, 0xE4); /* Timer 1 control and status */
|
||
SFR(T1CCTL0, 0xE5); /* Timer 1 channel 0 capture/compare control */
|
||
SFR(T1CCTL1, 0xE6); /* Timer 1 channel 1 capture/compare control */
|
||
SFR(T1CCTL2, 0xE7); /* Timer 1 channel 2 capture/compare control */
|
||
SFR(T1STAT, 0xAF); /* Timer 1 status */
|
||
|
||
/* Timer 2 (MAC Timer) */
|
||
SFR(T2CTRL, 0x94); /* Timer 2 control */
|
||
SFR(T2EVTCFG, 0x9C); /* Timer 2 event configuration */
|
||
SFR(T2IRQF, 0xA1); /* Timer 2 interrupt flags */
|
||
SFR(T2M0, 0xA2); /* Timer 2 multiplexed register 0 */
|
||
SFR(T2M1, 0xA3); /* Timer 2 multiplexed register 1 */
|
||
SFR(T2MOVF0, 0xA4); /* Timer 2 multiplexed overflow register 0 */
|
||
SFR(T2MOVF1, 0xA5); /* Timer 2 multiplexed overflow register 1 */
|
||
SFR(T2MOVF2, 0xA6); /* Timer 2 multiplexed overflow register 2 */
|
||
SFR(T2IRQM, 0xA7); /* Timer 2 interrupt mask */
|
||
SFR(T2MSEL, 0xC3); /* Timer 2 multiplex select */
|
||
|
||
/* Timer 3 */
|
||
SFR(T3CNT, 0xCA); /* Timer 3 counter */
|
||
SFR(T3CTL, 0xCB); /* Timer 3 control */
|
||
SFR(T3CCTL0, 0xCC); /* Timer 3 channel 0 compare control */
|
||
SFR(T3CC0, 0xCD); /* Timer 3 channel 0 compare value */
|
||
SFR(T3CCTL1, 0xCE); /* Timer 3 channel 1 compare control */
|
||
SFR(T3CC1, 0xCF); /* Timer 3 channel 1 compare value */
|
||
|
||
/* Timer 4 */
|
||
SFR(T4CNT, 0xEA); /* Timer 4 counter */
|
||
SFR(T4CTL, 0xEB); /* Timer 4 control */
|
||
SFR(T4CCTL0, 0xEC); /* Timer 4 channel 0 compare control */
|
||
SFR(T4CC0, 0xED); /* Timer 4 channel 0 compare value */
|
||
SFR(T4CCTL1, 0xEE); /* Timer 4 channel 1 compare control */
|
||
SFR(T4CC1, 0xEF); /* Timer 4 channel 1 compare value */
|
||
|
||
/* Timer 1, 3, 4 join Interrupts */
|
||
SFR(TIMIF, 0xD8); /* Timers 1/3/4 joint interrupt mask/flags */
|
||
SBIT(OVFIM, 0xD8, 6); /* Timer 1 overflow interrupt mask */
|
||
SBIT(T4CH1IF, 0xD8, 5); /* Timer 4 channel 1 interrupt flag */
|
||
SBIT(T4CH0IF, 0xD8, 4); /* Timer 4 channel 0 interrupt flag */
|
||
SBIT(T4OVFIF, 0xD8, 3); /* Timer 4 overflow interrupt flag */
|
||
SBIT(T3CH1IF, 0xD8, 2); /* Timer 3 channel 1 interrupt flag */
|
||
SBIT(T3CH0IF, 0xD8, 1); /* Timer 3 channel 0 interrupt flag */
|
||
SBIT(T3OVFIF, 0xD8, 0); /* Timer 3 overflow interrupt flag */
|
||
|
||
/* USART 0 */
|
||
SFR(U0CSR, 0x86); /* USART 0 control and status */
|
||
SFR(U0DBUF, 0xC1); /* USART 0 receive/transmit data buffer */
|
||
SFR(U0BAUD, 0xC2); /* USART 0 baud-rate control */
|
||
SFR(U0UCR, 0xC4); /* USART 0 UART control */
|
||
SFR(U0GCR, 0xC5); /* USART 0 generic control */
|
||
|
||
/* USART 1 */
|
||
SFR(U1CSR, 0xF8); /* USART 1 control and status */
|
||
SBIT(MODE, 0xF8, 7); /* USART mode select */
|
||
SBIT(RE, 0xF8, 6); /* UART receiver enable */
|
||
SBIT(SLAVE, 0xF8, 5); /* SPI master- or slave mode select */
|
||
SBIT(FE, 0xF8, 4); /* UART framing error status */
|
||
SBIT(ERR, 0xF8, 3); /* UART parity error status */
|
||
SBIT(RX_BYTE, 0xF8, 2); /* Receive byte status */
|
||
SBIT(TX_BYTE, 0xF8, 1); /* Transmit byte status */
|
||
SBIT(ACTIVE, 0xF8, 0); /* USART transmit/receive active status */
|
||
SFR(U1DBUF, 0xF9); /* USART 1 receive/transmit data buffer */
|
||
SFR(U1BAUD, 0xFA); /* USART 1 baud-rate control */
|
||
SFR(U1UCR, 0xFB); /* USART 1 UART control */
|
||
SFR(U1GCR, 0xFC); /* USART 1 Generic control */
|
||
|
||
/* Watchdog Timer */
|
||
SFR(WDCTL, 0xC9); /* Watchdog Timer Control */
|
||
/*---------------------------------------------------------------------------
|
||
* XREG Registers (0x6000–0x63FF), excluding RF and USB registers
|
||
* (Table 2.2, page 31)
|
||
*---------------------------------------------------------------------------*/
|
||
SFRX(MONMUX , 0x61A6); /* Operational amplifier mode control (cc2530/31) */
|
||
SFRX(OPAMPMC, 0x61A6); /* Battery monitor MUX (cc2533) */
|
||
/* I2C registers - cc2533 only */
|
||
SFRX(I2CCFG, 0x6230); /* I2C control */
|
||
SFRX(I2CSTAT, 0x6231); /* I2C status */
|
||
SFRX(I2CDATA, 0x6232); /* I2C data */
|
||
SFRX(I2CADDR, 0x6233); /* I2C own slave address */
|
||
SFRX(I2CWC, 0x6234); /* Wrapper Control */
|
||
SFRX(I2CIO, 0x6235); /* GPIO */
|
||
/* End I2C registers */
|
||
SFRX(OBSSEL0, 0x6243); /* Observation output control - register 0 */
|
||
SFRX(OBSSEL1, 0x6244); /* Observation output control - register 1 */
|
||
SFRX(OBSSEL2, 0x6245); /* Observation output control - register 2 */
|
||
SFRX(OBSSEL3, 0x6246); /* Observation output control - register 3 */
|
||
SFRX(OBSSEL4, 0x6247); /* Observation output control - register 4 */
|
||
SFRX(OBSSEL5, 0x6248); /* Observation output control - register 5 */
|
||
SFRX(CHVER, 0x6249); /* Chip version */
|
||
SFRX(CHIPID, 0x624A); /* Chip identification */
|
||
|
||
/* TR0 below is renamed to TESTREG0 to avoid namespace conflicts with the
|
||
* bit-addressable TCON.TR0 on the default 8051. See SDCC bug 3513300 */
|
||
SFRX(TESTREG0, 0x624B); /* Test register 0 */
|
||
|
||
SFRX(DBGDATA, 0x6260); /* Debug interface write data */
|
||
SFRX(SRCRC, 0x6262); /* Sleep reset CRC */
|
||
SFRX(BATTMON, 0x6264); /* Battery monitor */
|
||
SFRX(IVCTRL, 0x6265); /* Analog control register */
|
||
SFRX(FCTL, 0x6270); /* Flash control */
|
||
SFRX(FADDRL, 0x6271); /* Flash address low */
|
||
SFRX(FADDRH, 0x6272); /* Flash address high */
|
||
SFRX(FWDATA, 0x6273); /* Flash write data */
|
||
SFRX(CHIPINFO0, 0x6276); /* Chip information byte 0 */
|
||
SFRX(CHIPINFO1, 0x6277); /* Chip information byte 1 */
|
||
SFRX(IRCTL, 0x6281); /* Timer 1 IR generation control */
|
||
SFRX(CLD, 0x6290); /* Clock-loss detection */
|
||
SFRX(XX_T1CCTL0, 0x62A0); /* Timer 1 channel 0 capture/compare control (additional XREG mapping of SFR) */
|
||
SFRX(XX_T1CCTL1, 0x62A1); /* Timer 1 channel 1 capture/compare control (additional XREG mapping of SFR register) */
|
||
SFRX(XX_T1CCTL2, 0x62A2); /* Timer 1 channel 2 capture/compare control (additional XREG mapping of SFR register) */
|
||
SFRX(T1CCTL3, 0x62A3); /* Timer 1 channel 3 capture/compare control */
|
||
SFRX(T1CCTL4, 0x62A4); /* Timer 1 channel 4 capture/compare control */
|
||
SFRX(XX_T1CC0L, 0x62A6); /* Timer 1 channel 0 capture/compare value low (additional XREG mapping of SFR register) */
|
||
SFRX(XX_T1CC0H, 0x62A7); /* Timer 1 channel 0 capture/compare value high (additional XREG mapping of SFR register) */
|
||
SFRX(XX_T1CC1L, 0x62A8); /* Timer 1 channel 1 capture/compare value low (additional XREG mapping of SFR register) */
|
||
SFRX(XX_T1CC1H, 0x62A9); /* Timer 1 channel 1 capture/compare value high (additional XREG mapping of SFR register) */
|
||
SFRX(XX_T1CC2L, 0x62AA); /* Timer 1 channel 2 capture/compare value low (additional XREG mapping of SFR register) */
|
||
SFRX(XX_T1CC2H, 0x62AB); /* Timer 1 channel 2 capture/compare value high (additional XREG mapping of SFR register) */
|
||
SFRX(T1CC3L, 0x62AC); /* Timer 1 channel 3 capture/compare value low */
|
||
SFRX(T1CC3H, 0x62AD); /* Timer 1 channel 3 capture/compare value high */
|
||
SFRX(T1CC4L, 0x62AE); /* Timer 1 channel 4 capture/compare value low */
|
||
SFRX(T1CC4H, 0x62AF); /* Timer 1 channel 4 capture/compare value high */
|
||
SFRX(STCC, 0x62B0); /* Sleep Timer capture control */
|
||
SFRX(STCS, 0x62B1); /* Sleep Timer capture status */
|
||
SFRX(STCV0, 0x62B2); /* Sleep Timer capture value byte 0 */
|
||
SFRX(STCV1, 0x62B3); /* Sleep Timer capture value byte 1 */
|
||
SFRX(STCV2, 0x62B4); /* Sleep Timer capture value byte 2 */
|
||
SFRX(OPAMPC, 0x62C0); /* Operational amplifier control */
|
||
SFRX(OPAMPS, 0x62C1); /* Operational amplifier status */
|
||
SFRX(CMPCTL, 0x62D0); /* Analog comparator control and status */
|
||
/*---------------------------------------------------------------------------
|
||
* Radio Registers
|
||
* (Sec. 23, page 211)
|
||
*---------------------------------------------------------------------------*/
|
||
SFRX(RFCORE_RAM, 0x6000); /* RF Core Memory Map (0x6000 to 0x0617F) */
|
||
SFRX(RXFIFO, 0x6000); /* TXFIFO Direct Access (0x6000 to 0x607F) */
|
||
SFRX(TXFIFO, 0x6080); /* TXFIFO Direct Access (0x6080 to 0x60FF) */
|
||
|
||
SFRX(SRC_ADDR_TABLE, 0x6100); /* Source Address Table Start */
|
||
|
||
/* Source Address Matching Result */
|
||
SFRX(SRCRESMASK0, 0x6160); /* Extended address matching */
|
||
SFRX(SRCRESMASK1, 0x6161); /* Short address matching */
|
||
SFRX(SRCRESMASK2, 0x6162); /* Source address match - 24-bit mask */
|
||
SFRX(SRCRESINDEX, 0x6163); /* Bit index of least-significant 1 in SRCRESMASK */
|
||
|
||
/* Source Address Matching Control */
|
||
SFRX(SRCEXTPENDEN0, 0x6164); /* Ext. Address bit-mask 0 (LSB) */
|
||
SFRX(SRCEXTPENDEN1, 0x6165); /* Ext. Address bit-mask 1 */
|
||
SFRX(SRCEXTPENDEN2, 0x6166); /* Ext. Address bit-mask 2 (MSB) */
|
||
SFRX(SRCSHORTPENDEN0, 0x6167); /* Short Address bit-mask 0 (LSB) */
|
||
SFRX(SRCSHORTPENDEN1, 0x6168); /* Short Address bit-mask 1 */
|
||
SFRX(SRCSHORTPENDEN2, 0x6169); /* Short Address bit-mask 2 (MSB) */
|
||
|
||
/* Local Address Information (used during destination address filtering) */
|
||
SFRX(EXT_ADDR0, 0x616A); /* IEEE extended address 0 */
|
||
SFRX(EXT_ADDR1, 0x616B); /* IEEE extended address 1 */
|
||
SFRX(EXT_ADDR2, 0x616C); /* IEEE extended address 2 */
|
||
SFRX(EXT_ADDR3, 0x616D); /* IEEE extended address 3 */
|
||
SFRX(EXT_ADDR4, 0x616E); /* IEEE extended address 4 */
|
||
SFRX(EXT_ADDR5, 0x616F); /* IEEE extended address 5 */
|
||
SFRX(EXT_ADDR6, 0x6170); /* IEEE extended address 6 */
|
||
SFRX(EXT_ADDR7, 0x6171); /* IEEE extended address 7 */
|
||
SFRX(PAN_ID0, 0x6172); /* PAN ID 0 */
|
||
SFRX(PAN_ID1, 0x6173); /* PAN ID 1 */
|
||
SFRX(SHORT_ADDR0, 0x6174); /* Short Address 0 */
|
||
SFRX(SHORT_ADDR1, 0x6175); /* Short Address 1 */
|
||
|
||
SFRX(FRMFILT0, 0x6180); /* Frame Filtering 0 */
|
||
SFRX(FRMFILT1, 0x6181); /* Frame Filtering 1 */
|
||
SFRX(SRCMATCH, 0x6182); /* Source Address Matching and Pending Bits */
|
||
SFRX(SRCSHORTEN0, 0x6183); /* Short Address Matching 0 */
|
||
SFRX(SRCSHORTEN1, 0x6184); /* Short Address Matching 1 */
|
||
SFRX(SRCSHORTEN2, 0x6185); /* Short Address Matching 2 */
|
||
SFRX(SRCEXTEN0, 0x6186); /* Extended Address Matching 0 */
|
||
SFRX(SRCEXTEN1, 0x6187); /* Extended Address Matching 1 */
|
||
SFRX(SRCEXTEN2, 0x6188); /* Extended Address Matching 2 */
|
||
SFRX(FRMCTRL0, 0x6189); /* Frame Handling */
|
||
SFRX(FRMCTRL1, 0x618A); /* Frame Handling */
|
||
SFRX(RXENABLE, 0x618B); /* RX Enabling */
|
||
SFRX(RXMASKSET, 0x618C); /* RX Enabling */
|
||
SFRX(RXMASKCLR, 0x618D); /* RX Disabling */
|
||
SFRX(FREQTUNE, 0x618E); /* Crystal Oscillator Frequency Tuning */
|
||
SFRX(FREQCTRL, 0x618F); /* RF Frequency Control */
|
||
SFRX(TXPOWER, 0x6190); /* Controls the Output Power */
|
||
SFRX(TXCTRL, 0x6191); /* Controls the TX Settings */
|
||
SFRX(FSMSTAT0, 0x6192); /* Radio Status Register */
|
||
SFRX(FSMSTAT1, 0x6193); /* Radio Status Register */
|
||
SFRX(FIFOPCTRL, 0x6194); /* FIFOP Threshold */
|
||
SFRX(FSMCTRL, 0x6195); /* FSM Options */
|
||
SFRX(CCACTRL0, 0x6196); /* CCA Threshold */
|
||
SFRX(CCACTRL1, 0x6197); /* Other CCA Options */
|
||
SFRX(RSSI, 0x6198); /* RSSI Status Register */
|
||
SFRX(RSSISTAT, 0x6199); /* RSSI Valid Status Register */
|
||
SFRX(RXFIRST, 0x619A); /* First Byte in RXFIFO */
|
||
SFRX(RXFIFOCNT, 0x619B); /* Number of Bytes in RXFIFO */
|
||
SFRX(TXFIFOCNT, 0x619C); /* Number of Bytes in TXFIFO */
|
||
SFRX(RXFIRST_PTR, 0x619D); /* RXFIFO Pointer */
|
||
SFRX(RXLAST_PTR, 0x619E); /* RXFIFO Pointer */
|
||
SFRX(RXP1_PTR, 0x619F); /* RXFIFO Pointer */
|
||
SFRX(TXFIRST_PTR, 0x61A1); /* TXFIFO Pointer */
|
||
SFRX(TXLAST_PTR, 0x61A2); /* TXFIFO Pointer */
|
||
SFRX(RFIRQM0, 0x61A3); /* RF Interrupt Masks 0 */
|
||
SFRX(RFIRQM1, 0x61A4); /* RF Interrupt Masks 1 */
|
||
SFRX(RFERRM, 0x61A5); /* RF Error Interrupt Mask */
|
||
SFRX(RFRND, 0x61A7); /* Random Data */
|
||
SFRX(MDMCTRL0, 0x61A8); /* Controls Modem 0 */
|
||
SFRX(MDMCTRL1, 0x61A9); /* Controls Modem 1 */
|
||
SFRX(FREQEST, 0x61AA); /* Estimated RF Frequency Offset */
|
||
SFRX(RXCTRL, 0x61AB); /* Tune Receive Section */
|
||
SFRX(FSCTRL, 0x61AC); /* Tune Frequency Synthesizer */
|
||
SFRX(FSCAL0, 0x61AD); /* Tune Frequency Calibration 0 */
|
||
SFRX(FSCAL1, 0x61AE); /* Tune Frequency Calibration 1 */
|
||
SFRX(FSCAL2, 0x61AF); /* Tune Frequency Calibration 2 */
|
||
SFRX(FSCAL3, 0x61B0); /* Tune Frequency Calibration 3 */
|
||
SFRX(AGCCTRL0, 0x61B1); /* AGC Dynamic Range Control */
|
||
SFRX(AGCCTRL1, 0x61B2); /* AGC Reference Level */
|
||
SFRX(AGCCTRL2, 0x61B3); /* AGC Gain Override */
|
||
SFRX(AGCCTRL3, 0x61B4); /* AGC Control */
|
||
SFRX(ADCTEST0, 0x61B5); /* ADC Tuning 0 */
|
||
SFRX(ADCTEST1, 0x61B6); /* ADC Tuning 1 */
|
||
SFRX(ADCTEST2, 0x61B7); /* ADC Tuning 2 */
|
||
SFRX(MDMTEST0, 0x61B8); /* Test Register for Modem 0 */
|
||
SFRX(MDMTEST1, 0x61B9); /* Test Register for Modem 1 */
|
||
SFRX(DACTEST0, 0x61BA); /* DAC Override Value */
|
||
SFRX(DACTEST1, 0x61BB); /* DAC Override Value */
|
||
SFRX(DACTEST2, 0x61BC); /* DAC Test Setting */
|
||
SFRX(ATEST, 0x61BD); /* Analog Test Control */
|
||
SFRX(PTEST0, 0x61BE); /* Override Power-Down Register 0 */
|
||
SFRX(PTEST1, 0x61BF); /* Override Power-Down Register 1 */
|
||
SFRX(TXFILTCFG, 0x61FA); /* TX Filter Configuration */
|
||
SFRX(RFC_OBS_CTRL0, 0x61EB); /* RF Observation Mux Control 0 */
|
||
SFRX(RFC_OBS_CTRL1, 0x61EC); /* RF Observation Mux Control 1 */
|
||
SFRX(RFC_OBS_CTRL2, 0x61ED); /* RF Observation Mux Control 2 */
|
||
|
||
/* Command Strobe/CSMA-CA Processor Registers */
|
||
SFRX(CSPPROG0, 0x61C0); /* CSP Program Memory, Byte 0 */
|
||
SFRX(CSPPROG1, 0x61C1); /* CSP Program Memory, Byte 1 */
|
||
SFRX(CSPPROG2, 0x61C2); /* CSP Program Memory, Byte 2 */
|
||
SFRX(CSPPROG3, 0x61C3); /* CSP Program Memory, Byte 3 */
|
||
SFRX(CSPPROG4, 0x61C4); /* CSP Program Memory, Byte 4 */
|
||
SFRX(CSPPROG5, 0x61C5); /* CSP Program Memory, Byte 5 */
|
||
SFRX(CSPPROG6, 0x61C6); /* CSP Program Memory, Byte 6 */
|
||
SFRX(CSPPROG7, 0x61C7); /* CSP Program Memory, Byte 7 */
|
||
SFRX(CSPPROG8, 0x61C8); /* CSP Program Memory, Byte 8 */
|
||
SFRX(CSPPROG9, 0x61C9); /* CSP Program Memory, Byte 9 */
|
||
SFRX(CSPPROG10, 0x61CA); /* CSP Program Memory, Byte 10 */
|
||
SFRX(CSPPROG11, 0x61CB); /* CSP Program Memory, Byte 11 */
|
||
SFRX(CSPPROG12, 0x61CC); /* CSP Program Memory, Byte 12 */
|
||
SFRX(CSPPROG13, 0x61CD); /* CSP Program Memory, Byte 13 */
|
||
SFRX(CSPPROG14, 0x61CE); /* CSP Program Memory, Byte 14 */
|
||
SFRX(CSPPROG15, 0x61CF); /* CSP Program Memory, Byte 15 */
|
||
SFRX(CSPPROG16, 0x61D0); /* CSP Program Memory, Byte 16 */
|
||
SFRX(CSPPROG17, 0x61D1); /* CSP Program Memory, Byte 17 */
|
||
SFRX(CSPPROG18, 0x61D2); /* CSP Program Memory, Byte 18 */
|
||
SFRX(CSPPROG19, 0x61D3); /* CSP Program Memory, Byte 19 */
|
||
SFRX(CSPPROG20, 0x61D4); /* CSP Program Memory, Byte 20 */
|
||
SFRX(CSPPROG21, 0x61D5); /* CSP Program Memory, Byte 21 */
|
||
SFRX(CSPPROG22, 0x61D6); /* CSP Program Memory, Byte 22 */
|
||
SFRX(CSPPROG23, 0x61D7); /* CSP Program Memory, Byte 23 */
|
||
SFRX(CSPCTRL, 0x61E0); /* CSP Control Bit */
|
||
SFRX(CSPSTAT, 0x61E1); /* CSP Status Register */
|
||
SFRX(CSPX, 0x61E2); /* CSP X Register */
|
||
SFRX(CSPY, 0x61E3); /* CSP Y Register */
|
||
SFRX(CSPZ, 0x61E4); /* CSP Z Register */
|
||
SFRX(CSPT, 0x61E5); /* CSP T Register */
|
||
/*---------------------------------------------------------------------------
|
||
* cc2531 USB Registers
|
||
* (Sec. 21.12, page 196)
|
||
*---------------------------------------------------------------------------*/
|
||
SFRX(USBADDR, 0x6200); /* Function Address */
|
||
SFRX(USBPOW, 0x6201); /* Power/Control Register */
|
||
SFRX(USBIIF, 0x6202); /* IN Endpoints and EP0 Interrupt Flags */
|
||
SFRX(USBOIF, 0x6204); /* OUT-Endpoint Interrupt Flags */
|
||
SFRX(USBCIF, 0x6206); /* Common USB Interrupt Flags */
|
||
SFRX(USBIIE, 0x6207); /* IN Endpoints and EP0 Interrupt-Enable Mask */
|
||
SFRX(USBOIE, 0x6209); /* Out Endpoints Interrupt Enable Mask */
|
||
SFRX(USBCIE, 0x620B); /* Common USB Interrupt-Enable Mask */
|
||
SFRX(USBFRML, 0x620C); /* Current Frame Number (Low Byte) */
|
||
SFRX(USBFRMH, 0x620D); /* Current Frame Number (High Byte) */
|
||
SFRX(USBINDEX, 0x620E); /* Current-Endpoint Index Register */
|
||
SFRX(USBCTRL, 0x620F); /* USB Control Register */
|
||
SFRX(USBMAXI, 0x6210); /* Max. Packet Size for IN Endpoint{1–5} */
|
||
SFRX(USBCS0, 0x6211); /* EP0 Control and Status (USBINDEX = 0) */
|
||
SFRX(USBCSIL, 0x6211); /* IN EP{1–5} Control and Status, Low */
|
||
SFRX(USBCSIH, 0x6212); /* IN EP{1–5} Control and Status, High */
|
||
SFRX(USBMAXO, 0x6213); /* Max. Packet Size for OUT EP{1–5} */
|
||
SFRX(USBCSOL, 0x6214); /* OUT EP{1–5} Control and Status, Low */
|
||
SFRX(USBCSOH, 0x6215); /* OUT EP{1–5} Control and Status, High */
|
||
SFRX(USBCNT0, 0x6216); /* Number of Received Bytes in EP0 FIFO (USBINDEX = 0) */
|
||
SFRX(USBCNTL, 0x6216); /* Number of Bytes in EP{1–5} OUT FIFO, Low */
|
||
SFRX(USBCNTH, 0x6217); /* Number of Bytes in EP{1–5} OUT FIFO, High */
|
||
SFRX(USBF0, 0x6220); /* Endpoint-0 FIFO */
|
||
SFRX(USBF1, 0x6222); /* Endpoint-1 FIFO */
|
||
SFRX(USBF2, 0x6224); /* Endpoint-2 FIFO */
|
||
SFRX(USBF3, 0x6226); /* Endpoint-3 FIFO */
|
||
SFRX(USBF4, 0x6228); /* Endpoint-4 FIFO */
|
||
SFRX(USBF5, 0x622A); /* Endpoint-5 FIFO */
|
||
/*---------------------------------------------------------------------------
|
||
* SFR Access via XDATA (0x7080 - 0x70FF)
|
||
*---------------------------------------------------------------------------*/
|
||
SFRX(X_P0, 0x7080); /* Port 0 - Read Only */
|
||
SFRX(X_U0CSR, 0x7086); /* USART 0 control and status */
|
||
SFRX(X_P0IFG, 0x7089); /* Port 0 interrupt status flag */
|
||
SFRX(X_P1IFG, 0x708A); /* Port 1 interrupt status flag */
|
||
SFRX(X_P2IFG, 0x708B); /* Port 2 interrupt status flag */
|
||
SFRX(X_PICTL, 0x708C); /* Port pins interrupt mask and edge */
|
||
SFRX(X_P1IEN, 0x708D); /* Port 1 interrupt mask */
|
||
SFRX(X_P0INP, 0x708F); /* Port 0 input Mode */
|
||
SFRX(X_P1, 0x7090); /* Port 1 - Read Only */
|
||
SFRX(X_RFIRQF1, 0x7091); /* RF interrupt flags MSB */
|
||
SFRX(X_MPAGE, 0x7093); /* Memory page select */
|
||
SFRX(X__XPAGE, 0x7093); /* Memory page select - SDCC name */
|
||
SFRX(X_T2CTRL, 0x7094); /* Timer 2 control */
|
||
SFRX(X_ST0, 0x7095); /* Sleep Timer 0 */
|
||
SFRX(X_ST1, 0x7096); /* Sleep Timer 1 */
|
||
SFRX(X_ST2, 0x7097); /* Sleep Timer 2 */
|
||
SFRX(X_T2EVTCFG, 0x709C); /* Timer 2 event configuration */
|
||
SFRX(X_SLEEPSTA, 0x709D); /* Sleep-mode control status */
|
||
SFRX(X_CLKCONSTA, 0x709E); /* Clock control status */
|
||
SFRX(X_FMAP, 0x709F); /* Flash-memory bank mapping */
|
||
SFRX(X_PSBANK, 0x709F); /* Flash-memory bank mapping - SDCC name */
|
||
SFRX(X_P2, 0x70A0); /* Port 2 - Read Only */
|
||
SFRX(X_T2IRQF, 0x70A1); /* Timer 2 interrupt flags */
|
||
SFRX(X_T2M0, 0x70A2); /* Timer 2 multiplexed register 0 */
|
||
SFRX(X_T2M1, 0x70A3); /* Timer 2 multiplexed register 1 */
|
||
SFRX(X_T2MOVF0, 0x70A4); /* Timer 2 multiplexed overflow register 0 */
|
||
SFRX(X_T2MOVF1, 0x70A5); /* Timer 2 multiplexed overflow register 1 */
|
||
SFRX(X_T2MOVF2, 0x70A6); /* Timer 2 multiplexed overflow register 2 */
|
||
SFRX(X_T2IRQM, 0x70A7); /* Timer 2 interrupt mask */
|
||
SFRX(X_P0IEN, 0x70AB); /* Port 0 interrupt mask */
|
||
SFRX(X_P2IEN, 0x70AC); /* Port 2 interrupt mask */
|
||
SFRX(X_STLOAD, 0x70AD); /* Sleep-timer load status */
|
||
SFRX(X_PMUX, 0x70AE); /* Power-down signal mux */
|
||
SFRX(X_T1STAT, 0x70AF); /* Timer 1 status */
|
||
SFRX(X_ENCDI, 0x70B1); /* Encryption/decryption input data */
|
||
SFRX(X_ENCDO, 0x70B2); /* Encryption/decryption output data */
|
||
SFRX(X_ENCCS, 0x70B3); /* Encryption/decryption control and status */
|
||
SFRX(X_ADCCON1, 0x70B4); /* ADC control 1 */
|
||
SFRX(X_ADCCON2, 0x70B5); /* ADC control 2 */
|
||
SFRX(X_ADCCON3, 0x70B6); /* ADC control 3 */
|
||
SFRX(X_ADCL, 0x70BA); /* ADC data low */
|
||
SFRX(X_ADCH, 0x70BB); /* ADC data high */
|
||
SFRX(X_RNDL, 0x70BC); /* Random number generator data low */
|
||
SFRX(X_RNDH, 0x70BD); /* Random number generator data high */
|
||
SFRX(X_SLEEPCMD, 0x70BE); /* Sleep-mode control command */
|
||
SFRX(X_RFERRF, 0x70BF); /* RF error interrupt flags */
|
||
SFRX(X_U0DBUF, 0x70C1); /* USART 0 receive/transmit data buffer */
|
||
SFRX(X_U0BAUD, 0x70C2); /* USART 0 baud-rate control */
|
||
SFRX(X_T2MSEL, 0x70C3); /* Timer 2 multiplex select */
|
||
SFRX(X_U0UCR, 0x70C4); /* USART 0 UART control */
|
||
SFRX(X_U0GCR, 0x70C5); /* USART 0 generic control */
|
||
SFRX(X_CLKCONCMD, 0x70C6); /* Clock control command */
|
||
SFRX(X_MEMCTR, 0x70C7); /* Memory system control */
|
||
SFRX(X_WDCTL, 0x70C9); /* Watchdog Timer Control */
|
||
SFRX(X_T3CNT, 0x70CA); /* Timer 3 counter */
|
||
SFRX(X_T3CTL, 0x70CB); /* Timer 3 control */
|
||
SFRX(X_T3CCTL0, 0x70CC); /* Timer 3 channel 0 compare control */
|
||
SFRX(X_T3CC0, 0x70CD); /* Timer 3 channel 0 compare value */
|
||
SFRX(X_T3CCTL1, 0x70CE); /* Timer 3 channel 1 compare control */
|
||
SFRX(X_T3CC1, 0x70CF); /* Timer 3 channel 1 compare value */
|
||
SFRX(X_DMAIRQ, 0x70D1); /* DMA interrupt flag */
|
||
SFRX(X_DMA1CFGL, 0x70D2); /* DMA channel 1–4 configuration address low */
|
||
SFRX(X_DMA1CFGH, 0x70D3); /* DMA channel 1–4 configuration address high */
|
||
SFRX(X_DMA0CFGL, 0x70D4); /* DMA channel 0 configuration address low */
|
||
SFRX(X_DMA0CFGH, 0x70D5); /* DMA channel 0 configuration address high */
|
||
SFRX(X_DMAARM, 0x70D6); /* DMA channel armed */
|
||
SFRX(X_DMAREQ, 0x70D7); /* DMA channel start request and status */
|
||
SFRX(X_TIMIF, 0x70D8); /* Timers 1/3/4 joint interrupt mask/flags */
|
||
SFRX(X_RFD, 0x70D9); /* RF data */
|
||
SFRX(X_T1CC0L, 0x70DA); /* Timer 1 channel 0 capture/compare value low */
|
||
SFRX(X_T1CC0H, 0x70DB); /* Timer 1 channel 0 capture/compare value high */
|
||
SFRX(X_T1CC1L, 0x70DC); /* Timer 1 channel 1 capture/compare value low */
|
||
SFRX(X_T1CC1H, 0x70DD); /* Timer 1 channel 1 capture/compare value high */
|
||
SFRX(X_T1CC2L, 0x70DE); /* Timer 1 channel 2 capture/compare value low */
|
||
SFRX(X_T1CC2H, 0x70DF); /* Timer 1 channel 2 capture/compare value high */
|
||
SFRX(X_RFST, 0x70E1); /* RF command strobe */
|
||
SFRX(X_T1CNTL, 0x70E2); /* Timer 1 counter low */
|
||
SFRX(X_T1CNTH, 0x70E3); /* Timer 1 counter high */
|
||
SFRX(X_T1CTL, 0x70E4); /* Timer 1 control and status */
|
||
SFRX(X_T1CCTL0, 0x70E5); /* Timer 1 channel 0 capture/compare control */
|
||
SFRX(X_T1CCTL1, 0x70E6); /* Timer 1 channel 1 capture/compare control */
|
||
SFRX(X_T1CCTL2, 0x70E7); /* Timer 1 channel 2 capture/compare control */
|
||
SFRX(X_RFIRQF0, 0x70E9); /* RF interrupt flags LSB */
|
||
SFRX(X_T4CNT, 0x70EA); /* Timer 4 counter */
|
||
SFRX(X_T4CTL, 0x70EB); /* Timer 4 control */
|
||
SFRX(X_T4CCTL0, 0x70EC); /* Timer 4 channel 0 compare control */
|
||
SFRX(X_T4CC0, 0x70ED); /* Timer 4 channel 0 compare value */
|
||
SFRX(X_T4CCTL1, 0x70EE); /* Timer 4 channel 1 compare control */
|
||
SFRX(X_T4CC1, 0x70EF); /* Timer 4 channel 1 compare value */
|
||
SFRX(X_PERCFG, 0x70F1); /* Peripheral I/O control */
|
||
SFRX(X_APCFG, 0x70F2); /* Analog peripheral I/O configuration */
|
||
SFRX(X_P0SEL, 0x70F3); /* Port 0 function select */
|
||
SFRX(X_P1SEL, 0x70F4); /* Port 1 function select */
|
||
SFRX(X_P2SEL, 0x70F5); /* Port 2 function select */
|
||
SFRX(X_P1INP, 0x70F6); /* Port 1 input mode */
|
||
SFRX(X_P2INP, 0x70F7); /* Port 2 input mode */
|
||
SFRX(X_U1CSR, 0x70F8); /* USART 1 control and status */
|
||
SFRX(X_U1DBUF, 0x70F9); /* USART 1 receive/transmit data buffer */
|
||
SFRX(X_U1BAUD, 0x70FA); /* USART 1 baud-rate control */
|
||
SFRX(X_U1UCR, 0x70FB); /* USART 1 UART control */
|
||
SFRX(X_U1GCR, 0x70FC); /* USART 1 Generic control */
|
||
SFRX(X_P0DIR, 0x70FD); /* Port 0 direction */
|
||
SFRX(X_P1DIR, 0x70FE); /* Port 1 direction */
|
||
SFRX(X_P2DIR, 0x70FF); /* Port 2 direction */
|
||
/*---------------------------------------------------------------------------
|
||
* Information Page (Read Only)
|
||
*---------------------------------------------------------------------------*/
|
||
SFRX(X_INFOPAGE, 0x7800); /* Start of Information Page */
|
||
SFRX(X_IEEE_ADDR, 0x780C); /* Start of unique IEEE Address */
|
||
|
||
#endif /* CC253X_H_ */
|