contiki/platform/msb430
nvt-se 90b9b9bae3 configure LPP parameters with slightly longer listen time since the CC1020
driver switches from TX mode to RX mode rather slowly.

decreased CCA check timeout.
2009-03-26 12:47:12 +00:00
..
apps Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
buildscripts configurable port 2007-12-18 11:55:01 +00:00
dev avoid hanging in TX mode after CCA check failed. 2009-03-25 15:25:05 +00:00
doc added a small guide. 2008-09-26 18:14:12 +00:00
loader From the ESB port. 2007-06-28 12:54:05 +00:00
contiki-conf.h configure LPP parameters with slightly longer listen time since the CC1020 2009-03-26 12:47:12 +00:00
contiki-msb430-main.c switched from serial to serial_line. patch from Jesper Karlsson. 2009-03-24 15:02:03 +00:00
contiki-msb430.h Renamed serial module to serial-line 2009-03-17 20:32:22 +00:00
init-net-rime.c replaced usage of 16-bit rimeaddr field. 2008-12-02 16:00:15 +00:00
init-net-uip.c moving radio init to init-net files 2007-12-20 13:43:24 +00:00
Makefile Use test-abc instead of core. 2007-08-17 13:10:16 +00:00
Makefile.msb430 enable serial line tools using the same commands as the sky platform's Makefile 2009-03-17 22:27:14 +00:00
msb430-slip-arch.c cr->lf 2007-08-20 11:01:13 +00:00
node-id.c use uint16_t to be specific about id type size. 2007-09-14 19:24:45 +00:00
node-id.h use uint16_t to be specific about id type size. 2007-09-14 19:24:45 +00:00
symbols.c Scatterweb MSB430 port. 2007-06-28 12:49:57 +00:00
symbols.h Scatterweb MSB430 port. 2007-06-28 12:49:57 +00:00