mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-09-01 02:29:03 +00:00
326 lines
10 KiB
C
326 lines
10 KiB
C
/*
|
|
* Copyright (c) 2013, University of Michigan.
|
|
*
|
|
* Copyright (c) 2015, Weptech elektronik GmbH
|
|
* Author: Ulf Knoblich, ulf.knoblich@weptech.de
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
/**
|
|
* \addtogroup cc2538-spi
|
|
* @{
|
|
*
|
|
* \file
|
|
* Implementation of the cc2538 SPI peripheral driver
|
|
*/
|
|
#include "contiki.h"
|
|
#include "reg.h"
|
|
#include "spi-arch.h"
|
|
#include "dev/ioc.h"
|
|
#include "dev/sys-ctrl.h"
|
|
#include "dev/spi.h"
|
|
#include "dev/ssi.h"
|
|
#include "dev/gpio.h"
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Check port / pin settings for SPI0 and provide default values for spi_cfg */
|
|
#ifndef SPI0_CLK_PORT
|
|
#define SPI0_CLK_PORT (-1)
|
|
#endif
|
|
#ifndef SPI0_CLK_PIN
|
|
#define SPI0_CLK_PIN (-1)
|
|
#endif
|
|
#if SPI0_CLK_PORT >= 0 && SPI0_CLK_PIN < 0 || \
|
|
SPI0_CLK_PORT < 0 && SPI0_CLK_PIN >= 0
|
|
#error Both SPI0_CLK_PORT and SPI0_CLK_PIN must be valid or invalid
|
|
#endif
|
|
|
|
#ifndef SPI0_TX_PORT
|
|
#define SPI0_TX_PORT (-1)
|
|
#endif
|
|
#ifndef SPI0_TX_PIN
|
|
#define SPI0_TX_PIN (-1)
|
|
#endif
|
|
#if SPI0_TX_PORT >= 0 && SPI0_TX_PIN < 0 || \
|
|
SPI0_TX_PORT < 0 && SPI0_TX_PIN >= 0
|
|
#error Both SPI0_TX_PORT and SPI0_TX_PIN must be valid or invalid
|
|
#endif
|
|
|
|
#ifndef SPI0_RX_PORT
|
|
#define SPI0_RX_PORT (-1)
|
|
#endif
|
|
#ifndef SPI0_RX_PIN
|
|
#define SPI0_RX_PIN (-1)
|
|
#endif
|
|
#if SPI0_RX_PORT >= 0 && SPI0_RX_PIN < 0 || \
|
|
SPI0_RX_PORT < 0 && SPI0_RX_PIN >= 0
|
|
#error Both SPI0_RX_PORT and SPI0_RX_PIN must be valid or invalid
|
|
#endif
|
|
|
|
/* Here we check that either all or none of the ports are defined. As
|
|
we did already check that both ports + pins are either defined or
|
|
not for every pin, this means that we can check for an incomplete
|
|
configuration by only looking at the port defines */
|
|
/* If some SPI0 pads are valid */
|
|
#if SPI0_CLK_PORT >= 0 || SPI0_TX_PORT >= 0 || SPI0_RX_PORT >= 0
|
|
/* but not all */
|
|
#if SPI0_CLK_PORT < 0 || SPI0_TX_PORT < 0 || SPI0_RX_PORT < 0
|
|
#error Some SPI0 pad definitions are invalid
|
|
#endif
|
|
#define SPI0_PADS_VALID
|
|
#endif
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Check port / pin settings for SPI1 and provide default values for spi_cfg */
|
|
#ifndef SPI1_CLK_PORT
|
|
#define SPI1_CLK_PORT (-1)
|
|
#endif
|
|
#ifndef SPI1_CLK_PIN
|
|
#define SPI1_CLK_PIN (-1)
|
|
#endif
|
|
#if SPI1_CLK_PORT >= 0 && SPI1_CLK_PIN < 0 || \
|
|
SPI1_CLK_PORT < 0 && SPI1_CLK_PIN >= 0
|
|
#error Both SPI1_CLK_PORT and SPI1_CLK_PIN must be valid or invalid
|
|
#endif
|
|
|
|
#ifndef SPI1_TX_PORT
|
|
#define SPI1_TX_PORT (-1)
|
|
#endif
|
|
#ifndef SPI1_TX_PIN
|
|
#define SPI1_TX_PIN (-1)
|
|
#endif
|
|
#if SPI1_TX_PORT >= 0 && SPI1_TX_PIN < 0 || \
|
|
SPI1_TX_PORT < 0 && SPI1_TX_PIN >= 0
|
|
#error Both SPI1_TX_PORT and SPI1_TX_PIN must be valid or invalid
|
|
#endif
|
|
|
|
#ifndef SPI1_RX_PORT
|
|
#define SPI1_RX_PORT (-1)
|
|
#endif
|
|
#ifndef SPI1_RX_PIN
|
|
#define SPI1_RX_PIN (-1)
|
|
#endif
|
|
#if SPI1_RX_PORT >= 0 && SPI1_RX_PIN < 0 || \
|
|
SPI1_RX_PORT < 0 && SPI1_RX_PIN >= 0
|
|
#error Both SPI1_RX_PORT and SPI1_RX_PIN must be valid or invalid
|
|
#endif
|
|
|
|
/* If some SPI1 pads are valid */
|
|
#if SPI1_CLK_PORT >= 0 || SPI1_TX_PORT >= 0 || SPI1_RX_PORT >= 0
|
|
/* but not all */
|
|
#if SPI1_CLK_PORT < 0 || SPI1_TX_PORT < 0 || SPI1_RX_PORT < 0
|
|
#error Some SPI1 pad definitions are invalid
|
|
#endif
|
|
#define SPI1_PADS_VALID
|
|
#endif
|
|
|
|
#ifdef SPI_DEFAULT_INSTANCE
|
|
#if SPI_DEFAULT_INSTANCE == 0
|
|
#ifndef SPI0_PADS_VALID
|
|
#error SPI_DEFAULT_INSTANCE is set to SPI0, but its pads are not valid
|
|
#endif
|
|
#elif SPI_DEFAULT_INSTANCE == 1
|
|
#ifndef SPI1_PADS_VALID
|
|
#error SPI_DEFAULT_INSTANCE is set to SPI1, but its pads are not valid
|
|
#endif
|
|
#endif
|
|
#endif
|
|
|
|
#if (SPI0_CPRS_CPSDVSR & 1) == 1 || SPI0_CPRS_CPSDVSR < 2 || SPI0_CPRS_CPSDVSR > 254
|
|
#error SPI0_CPRS_CPSDVSR must be an even number between 2 and 254
|
|
#endif
|
|
|
|
#if (SPI1_CPRS_CPSDVSR & 1) == 1 || SPI1_CPRS_CPSDVSR < 2 || SPI1_CPRS_CPSDVSR > 254
|
|
#error SPI1_CPRS_CPSDVSR must be an even number between 2 and 254
|
|
#endif
|
|
|
|
/*---------------------------------------------------------------------------*/
|
|
typedef struct {
|
|
int8_t port;
|
|
int8_t pin;
|
|
} spi_pad_t;
|
|
typedef struct {
|
|
uint32_t base;
|
|
uint32_t ioc_ssirxd_ssi;
|
|
uint32_t ioc_pxx_sel_ssi_clkout;
|
|
uint32_t ioc_pxx_sel_ssi_txd;
|
|
uint8_t ssi_cprs_cpsdvsr;
|
|
spi_pad_t clk;
|
|
spi_pad_t tx;
|
|
spi_pad_t rx;
|
|
} spi_regs_t;
|
|
/*---------------------------------------------------------------------------*/
|
|
static const spi_regs_t spi_regs[SSI_INSTANCE_COUNT] = {
|
|
{
|
|
.base = SSI0_BASE,
|
|
.ioc_ssirxd_ssi = IOC_SSIRXD_SSI0,
|
|
.ioc_pxx_sel_ssi_clkout = IOC_PXX_SEL_SSI0_CLKOUT,
|
|
.ioc_pxx_sel_ssi_txd = IOC_PXX_SEL_SSI0_TXD,
|
|
.ssi_cprs_cpsdvsr = SPI0_CPRS_CPSDVSR,
|
|
.clk = { SPI0_CLK_PORT, SPI0_CLK_PIN },
|
|
.tx = { SPI0_TX_PORT, SPI0_TX_PIN },
|
|
.rx = { SPI0_RX_PORT, SPI0_RX_PIN }
|
|
}, {
|
|
.base = SSI1_BASE,
|
|
.ioc_ssirxd_ssi = IOC_SSIRXD_SSI1,
|
|
.ioc_pxx_sel_ssi_clkout = IOC_PXX_SEL_SSI1_CLKOUT,
|
|
.ioc_pxx_sel_ssi_txd = IOC_PXX_SEL_SSI1_TXD,
|
|
.ssi_cprs_cpsdvsr = SPI1_CPRS_CPSDVSR,
|
|
.clk = { SPI1_CLK_PORT, SPI1_CLK_PIN },
|
|
.tx = { SPI1_TX_PORT, SPI1_TX_PIN },
|
|
.rx = { SPI1_RX_PORT, SPI1_RX_PIN }
|
|
}
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Deprecated function call provided for compatibility reasons */
|
|
#ifdef SPI_DEFAULT_INSTANCE
|
|
void
|
|
spi_init(void)
|
|
{
|
|
spix_init(SPI_DEFAULT_INSTANCE);
|
|
}
|
|
#endif /* #ifdef SPI_DEFAULT_INSTANCE */
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
spix_init(uint8_t spi)
|
|
{
|
|
const spi_regs_t *regs;
|
|
|
|
if(spi >= SSI_INSTANCE_COUNT) {
|
|
return;
|
|
}
|
|
|
|
regs = &spi_regs[spi];
|
|
|
|
if(regs->clk.port < 0) {
|
|
/* Port / pin configuration invalid. We checked for completeness
|
|
above. If clk.port is < 0, this means that all other defines are
|
|
< 0 as well */
|
|
return;
|
|
}
|
|
|
|
spix_enable(spi);
|
|
|
|
/* Start by disabling the peripheral before configuring it */
|
|
REG(regs->base + SSI_CR1) = 0;
|
|
|
|
/* Set the system clock as the SSI clock */
|
|
REG(regs->base + SSI_CC) = 0;
|
|
|
|
/* Set the mux correctly to connect the SSI pins to the correct GPIO pins */
|
|
ioc_set_sel(regs->clk.port,
|
|
regs->clk.pin,
|
|
regs->ioc_pxx_sel_ssi_clkout);
|
|
ioc_set_sel(regs->tx.port,
|
|
regs->tx.pin,
|
|
regs->ioc_pxx_sel_ssi_txd);
|
|
REG(regs->ioc_ssirxd_ssi) = (regs->rx.port * 8) + regs->rx.pin;
|
|
|
|
/* Put all the SSI gpios into peripheral mode */
|
|
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(regs->clk.port),
|
|
GPIO_PIN_MASK(regs->clk.pin));
|
|
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(regs->tx.port),
|
|
GPIO_PIN_MASK(regs->tx.pin));
|
|
GPIO_PERIPHERAL_CONTROL(GPIO_PORT_TO_BASE(regs->rx.port),
|
|
GPIO_PIN_MASK(regs->rx.pin));
|
|
|
|
/* Disable any pull ups or the like */
|
|
ioc_set_over(regs->clk.port, regs->clk.pin, IOC_OVERRIDE_DIS);
|
|
ioc_set_over(regs->tx.port, regs->tx.pin, IOC_OVERRIDE_DIS);
|
|
ioc_set_over(regs->rx.port, regs->rx.pin, IOC_OVERRIDE_DIS);
|
|
|
|
/* Configure the clock */
|
|
REG(regs->base + SSI_CPSR) = regs->ssi_cprs_cpsdvsr;
|
|
|
|
/*
|
|
* Configure the default SPI options.
|
|
* mode: Motorola frame format
|
|
* clock: High when idle
|
|
* data: Valid on rising edges of the clock
|
|
* bits: 8 byte data
|
|
*/
|
|
REG(regs->base + SSI_CR0) = SSI_CR0_SPH | SSI_CR0_SPO | (0x07);
|
|
|
|
/* Enable the SSI */
|
|
REG(regs->base + SSI_CR1) |= SSI_CR1_SSE;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
spix_enable(uint8_t spi)
|
|
{
|
|
if(spi >= SSI_INSTANCE_COUNT) {
|
|
return;
|
|
}
|
|
REG(SYS_CTRL_RCGCSSI) |= (1 << spi);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
spix_disable(uint8_t spi)
|
|
{
|
|
if(spi >= SSI_INSTANCE_COUNT) {
|
|
return;
|
|
}
|
|
REG(SYS_CTRL_RCGCSSI) &= ~(1 << spi);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
spix_set_mode(uint8_t spi,
|
|
uint32_t frame_format,
|
|
uint32_t clock_polarity,
|
|
uint32_t clock_phase,
|
|
uint32_t data_size)
|
|
{
|
|
const spi_regs_t *regs;
|
|
|
|
if(spi >= SSI_INSTANCE_COUNT) {
|
|
return;
|
|
}
|
|
|
|
regs = &spi_regs[spi];
|
|
|
|
/* Disable the SSI peripheral to configure it */
|
|
REG(regs->base + SSI_CR1) = 0;
|
|
|
|
/* Configure the SSI options */
|
|
REG(regs->base + SSI_CR0) = clock_phase |
|
|
clock_polarity |
|
|
frame_format |
|
|
(data_size - 1);
|
|
|
|
/* Re-enable the SSI */
|
|
REG(regs->base + SSI_CR1) |= SSI_CR1_SSE;
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
spix_cs_init(uint8_t port, uint8_t pin)
|
|
{
|
|
GPIO_SOFTWARE_CONTROL(GPIO_PORT_TO_BASE(port),
|
|
GPIO_PIN_MASK(pin));
|
|
ioc_set_over(port, pin, IOC_OVERRIDE_DIS);
|
|
GPIO_SET_OUTPUT(GPIO_PORT_TO_BASE(port), GPIO_PIN_MASK(pin));
|
|
GPIO_SET_PIN(GPIO_PORT_TO_BASE(port), GPIO_PIN_MASK(pin));
|
|
}
|
|
/** @} */
|