mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-09-01 17:29:13 +00:00
442 lines
19 KiB
C
442 lines
19 KiB
C
/*
|
|
* Copyright (c) 2015, Texas Instruments Incorporated - http://www.ti.com/
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
|
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
|
* COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
|
|
* OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \addtogroup cc26xx
|
|
* @{
|
|
*
|
|
* \defgroup rf-core CC13xx/CC26xx RF core
|
|
*
|
|
* Different flavours of chips of the CC13xx/CC26xx family have different
|
|
* radio capability. For example, the CC2650 can operate in IEEE 802.15.4 mode
|
|
* at 2.4GHz, but it can also operate in BLE mode. The CC1310 only supports
|
|
* sub-ghz mode.
|
|
*
|
|
* However, there are many radio functionalities that are identical across
|
|
* all chips. The rf-core driver provides support for this common functionality
|
|
*
|
|
* @{
|
|
*
|
|
* \file
|
|
* Header file for the CC13xx/CC26xx RF core driver
|
|
*/
|
|
/*---------------------------------------------------------------------------*/
|
|
#ifndef RF_CORE_H_
|
|
#define RF_CORE_H_
|
|
/*---------------------------------------------------------------------------*/
|
|
#include "contiki-conf.h"
|
|
#include "rf-core/api/common_cmd.h"
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
/*---------------------------------------------------------------------------*/
|
|
/* The channel to use in IEEE or prop mode. */
|
|
#ifdef RF_CORE_CONF_CHANNEL
|
|
#define RF_CORE_CHANNEL RF_CORE_CONF_CHANNEL
|
|
#else
|
|
#define RF_CORE_CHANNEL 25
|
|
#endif /* RF_CORE_CONF_IEEE_MODE_CHANNEL */
|
|
/*---------------------------------------------------------------------------*/
|
|
#define RF_CORE_CMD_ERROR 0
|
|
#define RF_CORE_CMD_OK 1
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \brief A data strcuture representing the radio's primary mode of operation
|
|
*
|
|
* The CC13xx / CC26xx radio supports up to potentially 3 modes: IEEE, Prop and
|
|
* BLE. Within Contiki, we assume that the radio is by default in one of IEEE
|
|
* or Prop in order to support standard 6LoWPAN / .15.4 operation. The BLE
|
|
* mode interrupts this so called "primary" mode in order to send BLE adv
|
|
* messages. Once BLE is done advertising, we need to be able to restore the
|
|
* previous .15.4 mode. Unfortunately, the only way this can be done with
|
|
* NETSTACK_RADIO API is by fully power-cycling the radio, which is something
|
|
* we do not want to do.
|
|
*
|
|
* Thus, we declare a secondary data structure for primary mode drivers (IEEE
|
|
* or Prop). We use this data structure to issue "soft off" and "back on"
|
|
* commands. Soft off in this context means stopping RX (e.g. the respective
|
|
* IEEE RX operation), but without shutting down the RF core (which is what
|
|
* NETSTACK_RADIO.off() would have done). We then remember what mode we were
|
|
* using in order to be able to re-enter RX mode for this mode.
|
|
*
|
|
* A NETSTACK_RADIO driver will declare those two functions somewhere within
|
|
* its module of implementation. During its init() routine, it will notify
|
|
* the RF core module so that the latter can abort and restore operations.
|
|
*/
|
|
typedef struct rf_core_primary_mode_s {
|
|
/**
|
|
* \brief A pointer to a function used to abort the current radio op
|
|
*/
|
|
void (*abort)(void);
|
|
|
|
/**
|
|
* \brief A pointer to a function that will restore the previous radio op
|
|
* \return RF_CORE_CMD_OK or RF_CORE_CMD_ERROR
|
|
*/
|
|
uint8_t (*restore)(void);
|
|
} rf_core_primary_mode_t;
|
|
/*---------------------------------------------------------------------------*/
|
|
/* RF Command status constants - Correspond to values in the CMDSTA register */
|
|
#define RF_CORE_CMDSTA_PENDING 0x00
|
|
#define RF_CORE_CMDSTA_DONE 0x01
|
|
#define RF_CORE_CMDSTA_ILLEGAL_PTR 0x81
|
|
#define RF_CORE_CMDSTA_UNKNOWN_CMD 0x82
|
|
#define RF_CORE_CMDSTA_UNKNOWN_DIR_CMD 0x83
|
|
#define RF_CORE_CMDSTA_CONTEXT_ERR 0x85
|
|
#define RF_CORE_CMDSTA_SCHEDULING_ERR 0x86
|
|
#define RF_CORE_CMDSTA_PAR_ERR 0x87
|
|
#define RF_CORE_CMDSTA_QUEUE_ERR 0x88
|
|
#define RF_CORE_CMDSTA_QUEUE_BUSY 0x89
|
|
|
|
/* Status values starting with 0x8 correspond to errors */
|
|
#define RF_CORE_CMDSTA_ERR_MASK 0x80
|
|
|
|
/* CMDSTA is 32-bits. Return value in bits 7:0 */
|
|
#define RF_CORE_CMDSTA_RESULT_MASK 0xFF
|
|
|
|
#define RF_CORE_RADIO_OP_STATUS_IDLE 0x0000
|
|
/*---------------------------------------------------------------------------*/
|
|
#define RF_CORE_NOT_ACCESSIBLE 0x00
|
|
#define RF_CORE_ACCESSIBLE 0x01
|
|
/*---------------------------------------------------------------------------*/
|
|
/* RF Radio Op status constants. Field 'status' in Radio Op command struct */
|
|
#define RF_CORE_RADIO_OP_STATUS_IDLE 0x0000
|
|
#define RF_CORE_RADIO_OP_STATUS_PENDING 0x0001
|
|
#define RF_CORE_RADIO_OP_STATUS_ACTIVE 0x0002
|
|
#define RF_CORE_RADIO_OP_STATUS_SKIPPED 0x0003
|
|
#define RF_CORE_RADIO_OP_STATUS_DONE_OK 0x0400
|
|
#define RF_CORE_RADIO_OP_STATUS_DONE_COUNTDOWN 0x0401
|
|
#define RF_CORE_RADIO_OP_STATUS_DONE_RXERR 0x0402
|
|
#define RF_CORE_RADIO_OP_STATUS_DONE_TIMEOUT 0x0403
|
|
#define RF_CORE_RADIO_OP_STATUS_DONE_STOPPED 0x0404
|
|
#define RF_CORE_RADIO_OP_STATUS_DONE_ABORT 0x0405
|
|
#define RF_CORE_RADIO_OP_STATUS_ERROR_PAST_START 0x0800
|
|
#define RF_CORE_RADIO_OP_STATUS_ERROR_START_TRIG 0x0801
|
|
#define RF_CORE_RADIO_OP_STATUS_ERROR_CONDITION 0x0802
|
|
#define RF_CORE_RADIO_OP_STATUS_ERROR_PAR 0x0803
|
|
#define RF_CORE_RADIO_OP_STATUS_ERROR_POINTER 0x0804
|
|
#define RF_CORE_RADIO_OP_STATUS_ERROR_CMDID 0x0805
|
|
#define RF_CORE_RADIO_OP_STATUS_ERROR_NO_SETUP 0x0807
|
|
#define RF_CORE_RADIO_OP_STATUS_ERROR_NO_FS 0x0808
|
|
#define RF_CORE_RADIO_OP_STATUS_ERROR_SYNTH_PROG 0x0809
|
|
|
|
/* Additional Op status values for IEEE mode */
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_SUSPENDED 0x2001
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_DONE_OK 0x2400
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_DONE_BUSY 0x2401
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_DONE_STOPPED 0x2402
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_DONE_ACK 0x2403
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_DONE_ACKPEND 0x2404
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_DONE_TIMEOUT 0x2405
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_DONE_BGEND 0x2406
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_DONE_ABORT 0x2407
|
|
#define RF_CORE_RADIO_OP_STATUS_ERROR_WRONG_BG 0x0806
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_ERROR_PAR 0x2800
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_ERROR_NO_SETUP 0x2801
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_ERROR_NO_FS 0x2802
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_ERROR_SYNTH_PROG 0x2803
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_ERROR_RXOVF 0x2804
|
|
#define RF_CORE_RADIO_OP_STATUS_IEEE_ERROR_TXUNF 0x2805
|
|
|
|
/* Op status values for BLE mode */
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_DONE_OK 0x1400
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_DONE_RXTIMEOUT 0x1401
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_DONE_NOSYNC 0x1402
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_DONE_RXERR 0x1403
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_DONE_CONNECT 0x1404
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_DONE_MAXNACK 0x1405
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_DONE_ENDED 0x1406
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_DONE_ABORT 0x1407
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_DONE_STOPPED 0x1408
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_ERROR_PAR 0x1800
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_ERROR_RXBUF 0x1801
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_ERROR_NO_SETUP 0x1802
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_ERROR_NO_FS 0x1803
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_ERROR_SYNTH_PROG 0x1804
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_ERROR_RXOVF 0x1805
|
|
#define RF_CORE_RADIO_OP_STATUS_BLE_ERROR_TXUNF 0x1806
|
|
|
|
/* Op status values for proprietary mode */
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_DONE_OK 0x3400
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_DONE_RXTIMEOUT 0x3401
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_DONE_BREAK 0x3402
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_DONE_ENDED 0x3403
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_DONE_STOPPED 0x3404
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_DONE_ABORT 0x3405
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_DONE_RXERR 0x3406
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_DONE_IDLE 0x3407
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_DONE_BUSY 0x3408
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_DONE_IDLETIMEOUT 0x3409
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_DONE_BUSYTIMEOUT 0x340A
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_ERROR_PAR 0x3800
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_ERROR_RXBUF 0x3801
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_ERROR_RXFULL 0x3802
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_ERROR_NO_SETUP 0x3803
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_ERROR_NO_FS 0x3804
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_ERROR_RXOVF 0x3805
|
|
#define RF_CORE_RADIO_OP_STATUS_PROP_ERROR_TXUNF 0x3806
|
|
|
|
/* Bits 15:12 signify the protocol */
|
|
#define RF_CORE_RADIO_OP_STATUS_PROTO_MASK 0xF000
|
|
#define RF_CORE_RADIO_OP_STATUS_PROTO_GENERIC 0x0000
|
|
#define RF_CORE_RADIO_OP_STATUS_PROTO_BLE 0x1000
|
|
#define RF_CORE_RADIO_OP_STATUS_PROTO_IEEE 0x2000
|
|
#define RF_CORE_RADIO_OP_STATUS_PROTO_PROP 0x3000
|
|
|
|
/* Bits 11:10 signify Running / Done OK / Done with error */
|
|
#define RF_CORE_RADIO_OP_MASKED_STATUS 0x0C00
|
|
#define RF_CORE_RADIO_OP_MASKED_STATUS_RUNNING 0x0000
|
|
#define RF_CORE_RADIO_OP_MASKED_STATUS_DONE 0x0400
|
|
#define RF_CORE_RADIO_OP_MASKED_STATUS_ERROR 0x0800
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Command Types */
|
|
#define RF_CORE_COMMAND_TYPE_MASK 0x0C00
|
|
#define RF_CORE_COMMAND_TYPE_RADIO_OP 0x0800
|
|
#define RF_CORE_COMMAND_TYPE_IEEE_BG_RADIO_OP 0x0800
|
|
#define RF_CORE_COMMAND_TYPE_IEEE_FG_RADIO_OP 0x0C00
|
|
|
|
#define RF_CORE_COMMAND_PROTOCOL_MASK 0x3000
|
|
#define RF_CORE_COMMAND_PROTOCOL_COMMON 0x0000
|
|
#define RF_CORE_COMMAND_PROTOCOL_BLE 0x1000
|
|
#define RF_CORE_COMMAND_PROTOCOL_IEEE 0x2000
|
|
#define RF_CORE_COMMAND_PROTOCOL_PROP 0x3000
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Radio timer register */
|
|
#define RATCNT 0x00000004
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Make the main driver process visible to mode drivers */
|
|
PROCESS_NAME(rf_core_process);
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* \brief Check whether the RF core is accessible
|
|
* \retval RF_CORE_ACCESSIBLE The core is powered and ready for access
|
|
* \retval RF_CORE_NOT_ACCESSIBLE The core is not ready
|
|
*
|
|
* If this function returns RF_CORE_NOT_ACCESSIBLE, rf_core_power_up() must be
|
|
* called before any attempt to access the core.
|
|
*/
|
|
uint8_t rf_core_is_accessible(void);
|
|
|
|
/**
|
|
* \brief Sends a command to the RF core.
|
|
*
|
|
* \param cmd The command value or a pointer to a command buffer
|
|
* \param status A pointer to a variable which will hold the status
|
|
* \return RF_CORE_CMD_OK or RF_CORE_CMD_ERROR
|
|
*
|
|
* This function supports all three types of command (Radio OP, immediate and
|
|
* direct)
|
|
*
|
|
* For immediate and Radio OPs, cmd is a pointer to the data structure
|
|
* containing the command and its parameters. This data structure must be
|
|
* 4-byte aligned.
|
|
*
|
|
* For direct commands, cmd contains the value of the command alongside its
|
|
* parameters. This value will be written to CMDSTA verbatim, so the command
|
|
* ID must be in the 16 high bits, and the 2 LS bits must be set to 01 by the
|
|
* caller.
|
|
*
|
|
* The caller is responsible of allocating and populating cmd for Radio OP and
|
|
* immediate commands
|
|
*
|
|
* The caller is responsible for allocating status
|
|
*
|
|
* For immediate commands and radio Ops, this function will set the command's
|
|
* status field to RF_CORE_RADIO_OP_STATUS_IDLE before sending it to the RF
|
|
*/
|
|
uint_fast8_t rf_core_send_cmd(uint32_t cmd, uint32_t *status);
|
|
|
|
/**
|
|
* \brief Block and wait for a Radio op to complete
|
|
* \param cmd A pointer to any command's structure
|
|
* \retval RF_CORE_CMD_OK the command completed with status _DONE_OK
|
|
* \retval RF_CORE_CMD_ERROR Timeout exceeded or the command completed with
|
|
* status _DONE_xxx (e.g. RF_CORE_RADIO_OP_STATUS_DONE_TIMEOUT)
|
|
*/
|
|
uint_fast8_t rf_core_wait_cmd_done(void *cmd);
|
|
|
|
/**
|
|
* \brief Turn on power to the RFC and boot it.
|
|
* \return RF_CORE_CMD_OK or RF_CORE_CMD_ERROR
|
|
*/
|
|
int rf_core_power_up(void);
|
|
|
|
/**
|
|
* \brief Disable RFCORE clock domain in the MCU VD and turn off the RFCORE PD
|
|
*/
|
|
void rf_core_power_down(void);
|
|
|
|
/**
|
|
* \brief Initialise RF APIs in the RF core
|
|
* \return RF_CORE_CMD_OK or RF_CORE_CMD_ERROR
|
|
*
|
|
* Depending on chip family and capability, this function will set the correct
|
|
* value to PRCM.RFCMODESEL
|
|
*/
|
|
uint8_t rf_core_set_modesel(void);
|
|
|
|
/**
|
|
* \brief Start the CM0 RAT
|
|
* \return RF_CORE_CMD_OK or RF_CORE_CMD_ERROR
|
|
*
|
|
* This function must be called each time the CM0 boots. The boot sequence
|
|
* can be performed automatically by calling rf_core_boot() if patches are not
|
|
* required. If patches are required then the patches must be applied after
|
|
* power up and before calling this function.
|
|
*/
|
|
uint8_t rf_core_start_rat(void);
|
|
|
|
/**
|
|
* \brief Stop the CM0 RAT synchronously
|
|
* \return RF_CORE_CMD_OK or RF_CORE_CMD_ERROR
|
|
*
|
|
* This function is not strictly necessary, but through calling it it's possibly
|
|
* to learn the RAT / RTC offset, which useful to get accurate radio timestamps.
|
|
*/
|
|
uint8_t rf_core_stop_rat(void);
|
|
|
|
/**
|
|
* \brief Restart the CM0 RAT
|
|
* \return RF_CORE_CMD_OK or RF_CORE_CMD_ERROR
|
|
*
|
|
* This function restarts the CM0 RAT and therefore resynchornizes it with RTC.
|
|
* To achieve good timing accuracy, it should be called periodically.
|
|
*/
|
|
uint8_t rf_core_restart_rat(void);
|
|
|
|
/**
|
|
* \brief Boot the RF Core
|
|
* \return RF_CORE_CMD_OK or RF_CORE_CMD_ERROR
|
|
*
|
|
* This function will perform the CM0 boot sequence. It will first power it up
|
|
* and then start the RAT. If a patch is required, then the mode driver must
|
|
* not call this function and perform the sequence manually, applying patches
|
|
* after boot and before calling rf_core_start_rat().
|
|
*
|
|
* The function will return RF_CORE_CMD_ERROR if any of those steps fails. If
|
|
* the boot sequence fails to complete, the RF Core will be powered down.
|
|
*/
|
|
uint8_t rf_core_boot(void);
|
|
|
|
/**
|
|
* \brief Setup RF core interrupts
|
|
*/
|
|
void rf_core_setup_interrupts(bool poll_mode);
|
|
|
|
/**
|
|
* \brief Enable interrupt on command done.
|
|
* \param fg set true to enable irq on foreground command done and false for
|
|
* background commands or if not in ieee mode.
|
|
* \param poll_mode true if the driver is in poll mode
|
|
*
|
|
* This is used within TX routines in order to be able to sleep the CM3 and
|
|
* wake up after TX has finished
|
|
*
|
|
* \sa rf_core_cmd_done_dis()
|
|
*/
|
|
void rf_core_cmd_done_en(bool fg, bool poll_mode);
|
|
|
|
/**
|
|
* \brief Disable the LAST_CMD_DONE and LAST_FG_CMD_DONE interrupts.
|
|
*
|
|
* This is used within TX routines after TX has completed
|
|
*
|
|
* \sa rf_core_cmd_done_en()
|
|
*/
|
|
void rf_core_cmd_done_dis(bool poll_mode);
|
|
|
|
/**
|
|
* \brief Returns a pointer to the most recent proto-dependent Radio Op
|
|
* \return The pointer
|
|
*
|
|
* The RF Core driver will remember the most recent proto-dependent Radio OP
|
|
* issued, so that other modules can inspect its type and state at a subsequent
|
|
* stage. The assumption is that those commands will be issued by a function
|
|
* that will then return. The following commands will be "remembered"
|
|
*
|
|
* - All BLE Radio Ops (0x18nn)
|
|
* - All Prop Radio Ops (0x38nn)
|
|
* - IEEE BG Radio Ops (0x28nn)
|
|
*
|
|
* The following commands are assumed to be executed synchronously and will
|
|
* thus not be remembered by the core and not returned by this function:
|
|
*
|
|
* - Direct commands
|
|
* - Proto-independent commands (including Radio Ops and Immediate ones)
|
|
* - IEEE FG Radio Ops (0x2Cxx)
|
|
*
|
|
* This assumes that all commands will be sent to the radio using
|
|
* rf_core_send_cmd()
|
|
*/
|
|
rfc_radioOp_t *rf_core_get_last_radio_op(void);
|
|
|
|
/**
|
|
* \brief Prepare a buffer to host a Radio Op
|
|
* \param buf A pointer to the buffer that will host the Radio Op
|
|
* \param len The buffer's length
|
|
* \param command The command ID
|
|
*
|
|
* The caller is responsible to allocate the buffer
|
|
*
|
|
* This function will not check whether the buffer is large enough to hold the
|
|
* command. This is the caller's responsibility
|
|
*
|
|
* This function will wipe out the buffer's contents.
|
|
*/
|
|
void rf_core_init_radio_op(rfc_radioOp_t *buf, uint16_t len, uint16_t command);
|
|
|
|
/**
|
|
* \brief Register a primary mode for radio operation
|
|
* \param mode A pointer to the struct representing the mode
|
|
*
|
|
* A normal NESTACK_RADIO driver will normally register itself by calling
|
|
* this function during its own init().
|
|
*
|
|
* \sa rf_core_primary_mode_t
|
|
*/
|
|
void rf_core_primary_mode_register(const rf_core_primary_mode_t *mode);
|
|
|
|
/**
|
|
* \brief Abort the currently running primary radio op
|
|
*/
|
|
void rf_core_primary_mode_abort(void);
|
|
|
|
/**
|
|
* \brief Abort the currently running primary radio op
|
|
*/
|
|
uint8_t rf_core_primary_mode_restore(void);
|
|
/*---------------------------------------------------------------------------*/
|
|
#endif /* RF_CORE_H_ */
|
|
/*---------------------------------------------------------------------------*/
|
|
/**
|
|
* @}
|
|
* @}
|
|
*/
|