David Kopf 7ca141b457 Access uart registers directly instead of through intermediate addresses in a RAM struct. ... Add a platform define to reduce the number of ports supported by the cpu.		2012-01-21 13:49:58 -05:00
..
usb	Allocate variable only when mass storage is enabled	2011-02-23 14:06:06 -05:00
clock-avr.h	Use correct prescale factor	2011-08-18 13:58:20 -04:00
clock.c	Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal	2012-01-10 12:42:27 -05:00
compiler.h
debug.c
debug.h
delay.c
delay.h
eeprom.c
flash.c
flash.h
lanc111.c
rs232_at90usb1287.h	Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schäfer	2010-12-03 18:16:56 +00:00
rs232_atmega32.h	Add stk500 platform and changes suggested by Daniel Willmann	2011-08-03 11:18:55 -04:00
rs232_atmega128.h	Convert obsolete MCU_MHZ to F_CPU and add 14745600MHz case using patch from Tobias Schäfer	2010-12-03 18:16:56 +00:00
rs232_atmega128rfa1.h	Add initial atmega128rfa1 file	2011-02-07 20:28:17 -05:00
rs232_atmega644.h	Add stk500 platform and changes suggested by Daniel Willmann	2011-08-03 11:18:55 -04:00
rs232_atmega1281.h	Apply patch of Ivan Delamer for atmega1281 @ 4 MHz	2011-08-17 13:16:46 -04:00
rs232_atmega1284.h	Add F_CPU=0x800000 option with phase lock to external 32768 Hz crystal	2012-01-10 12:42:27 -05:00
rs232.c	Access uart registers directly instead of through intermediate addresses in a RAM struct.	2012-01-21 13:49:58 -05:00
rs232.h	Add stk500 platform and changes suggested by Daniel Willmann	2011-08-03 11:18:55 -04:00
rtl8019-drv.c	A simple but substantial change: uIP used the htons()/HTONS() macro	2010-10-19 18:29:03 +00:00
rtl8019-drv.h
rtl8019.c
rtl8019.h
rtl8019dev.c
rtl8019dev.h
rtlregs.h
uart1.h	Include file needed for slip rpl-border-router build	2011-03-11 14:10:30 -05:00