mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-17 13:29:10 +00:00
324 lines
11 KiB
C
324 lines
11 KiB
C
/**
|
|
* \file
|
|
* EEPROM functions.
|
|
* \author Adam Dunkels <adam@sics.se>
|
|
*/
|
|
|
|
/* Copyright (c) 2004 Swedish Institute of Computer Science.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice,
|
|
* this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
|
* this list of conditions and the following disclaimer in the documentation
|
|
* and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
|
* WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
|
|
* SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
* EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
|
|
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
* OF SUCH DAMAGE.
|
|
*
|
|
*
|
|
* Author: Adam Dunkels <adam@sics.se>
|
|
*
|
|
*/
|
|
|
|
/*
|
|
Copyright 2003/2004, Freie Universitaet Berlin. All rights reserved.
|
|
|
|
These sources were developed at the Freie Universit\x{FFFF}t Berlin, Computer
|
|
Systems and Telematics group.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are
|
|
met:
|
|
|
|
- Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
|
|
- Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
- Neither the name of Freie Universitaet Berlin (FUB) nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
This software is provided by FUB and the contributors on an "as is"
|
|
basis, without any representations or warranties of any kind, express
|
|
or implied including, but not limited to, representations or
|
|
warranties of non-infringement, merchantability or fitness for a
|
|
particular purpose. In no event shall FUB or contributors be liable
|
|
for any direct, indirect, incidental, special, exemplary, or
|
|
consequential damages (including, but not limited to, procurement of
|
|
substitute goods or services; loss of use, data, or profits; or
|
|
business interruption) however caused and on any theory of liability,
|
|
whether in contract, strict liability, or tort (including negligence
|
|
or otherwise) arising in any way out of the use of this software, even
|
|
if advised of the possibility of such damage.
|
|
|
|
This implementation was developed by the CST group at the FUB.
|
|
Contributors: Thomas Pietsch, Bjoern Lichtblau
|
|
|
|
For documentation and questions please use the web site
|
|
http://www.scatterweb.net and the mailinglist
|
|
scatterweb@lists.spline.inf.fu-berlin.de (subscription via the Website).
|
|
Berlin, 2003/2004
|
|
*/
|
|
|
|
#include "contiki.h"
|
|
/* #include <msp430x14x.h> */
|
|
|
|
#include "dev/eeprom.h"
|
|
|
|
/* Temporary switch for the eeprom address. */
|
|
#define EEPROMADDRESS (0x00) /* use 8k EEPROM, future versions will have only one 64k eeprom at this address */
|
|
/*#define EEPROMADDRESS (0x02)*/ /* use 64k EEPROM */
|
|
|
|
/* must be set together with EEPROMADDRESS */
|
|
/*#define EEPROMPAGEMASK (0x1F) */ /* 8k EEPROM, 32b page writes possible */
|
|
#define EEPROMPAGEMASK (0x7F) /* 64k EEPROM, 128b page writes possible */
|
|
|
|
|
|
|
|
/*
|
|
* Macros for accessing the clock and data lines. Data is on P56 and
|
|
* clock on P57.
|
|
*/
|
|
#define SDA_HIGH (P5OUT |= 0x04) /**< EEPROM data line high */
|
|
#define SDA_LOW (P5OUT &= 0xFB) /**< EEPROM data line low */
|
|
#define SCL_HIGH (P5OUT |= 0x08) /**< EEPROM clock line high */
|
|
#define SCL_LOW (P5OUT &= 0xF7) /**< EEPROM clock line low */
|
|
|
|
|
|
/*-----------------------------------------------------------------------------------*/
|
|
/**
|
|
* \internal \name Basic functions for interfacing the i2c-like EEPROM bus.
|
|
*/
|
|
/** @{ */
|
|
|
|
/**
|
|
* \internal
|
|
* Put start condition on the bus.
|
|
*/
|
|
static void
|
|
start(void)
|
|
{
|
|
P5DIR |= 0x0C; /* ensure: P52(SDA), P53(SCL) output */
|
|
SCL_LOW; _NOP(); _NOP();
|
|
SDA_HIGH; _NOP(); _NOP();
|
|
SCL_HIGH; _NOP(); _NOP();
|
|
SDA_LOW; _NOP(); _NOP();
|
|
SCL_LOW; _NOP(); _NOP();
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------------------*/
|
|
/**
|
|
* \internal
|
|
* Put stop condition on the bus.
|
|
*/
|
|
static void
|
|
stop(void)
|
|
{
|
|
//P5DIR |= 0x0C; /* ensure: P52(SDA), P53(SCL) output */
|
|
SCL_LOW; _NOP(); _NOP();
|
|
SDA_LOW; _NOP(); _NOP();
|
|
SCL_HIGH; _NOP(); _NOP();
|
|
SDA_HIGH; _NOP(); _NOP();
|
|
SCL_LOW; _NOP(); _NOP();
|
|
P5DIR &= ~0x0C;
|
|
}
|
|
/*-----------------------------------------------------------------------------------*/
|
|
/**
|
|
* \internal
|
|
* Write a byte on the bus, return the acknowledge bit.
|
|
*/
|
|
static int
|
|
write_bus(unsigned char byte)
|
|
{
|
|
int i, ack;
|
|
|
|
/* Write byte, one bit at a time. Start with the leftmost (most
|
|
significant) bit and roll in bits from the right. */
|
|
for(i = 0; i < 8; ++i) {
|
|
if(byte & 0x80) {
|
|
SDA_HIGH;
|
|
} else {
|
|
SDA_LOW;
|
|
}
|
|
_NOP();
|
|
_NOP();
|
|
SCL_HIGH;
|
|
_NOP();
|
|
_NOP();
|
|
byte = byte << 1;
|
|
SCL_LOW;
|
|
_NOP();
|
|
_NOP();
|
|
}
|
|
|
|
/* check ack */
|
|
P5DIR &= 0xFB; /* P52(SDA) input */
|
|
SCL_HIGH;
|
|
_NOP();
|
|
_NOP();
|
|
if(P5IN & 0x04) {
|
|
ack = 0;
|
|
} else {
|
|
ack = 1; /* test if ack=0, else error */
|
|
}
|
|
SCL_LOW;
|
|
_NOP();
|
|
_NOP();
|
|
P5DIR |= 0x04; /* P52(SDA) output */
|
|
_NOP();
|
|
_NOP();
|
|
_NOP();
|
|
return ack;
|
|
}
|
|
/*-----------------------------------------------------------------------------------*/
|
|
/**
|
|
* \internal
|
|
* Read one byte from the bus.
|
|
*
|
|
* \param ack If set, the ackbit after the received byte will be set.
|
|
*/
|
|
static unsigned char
|
|
read_bus(unsigned char ack)
|
|
{
|
|
int i;
|
|
unsigned char byte = 0;
|
|
|
|
P5DIR &= 0xFB; /* P52(SDA) input */
|
|
|
|
for(i = 0; i < 8; ++i) {
|
|
byte = byte << 1;
|
|
SCL_HIGH;
|
|
_NOP();
|
|
_NOP();
|
|
if(P5IN & 0x04) {
|
|
byte |= 0x01;
|
|
} else {
|
|
byte &= 0xFE;
|
|
}
|
|
_NOP();
|
|
SCL_LOW;
|
|
_NOP();
|
|
_NOP();
|
|
}
|
|
|
|
P5DIR |= 0x04; /* P52(SDA) output */
|
|
if(ack) {
|
|
SDA_LOW;
|
|
} else {
|
|
SDA_HIGH;
|
|
}
|
|
_NOP();
|
|
SCL_HIGH;
|
|
_NOP();
|
|
SCL_LOW;
|
|
_NOP();
|
|
return byte;
|
|
}
|
|
/** @} */
|
|
/*-----------------------------------------------------------------------------------*/
|
|
/**
|
|
* Read bytes from the EEPROM using sequential read.
|
|
*/
|
|
void
|
|
eeprom_read(unsigned short addr, unsigned char *buf, int size)
|
|
{
|
|
unsigned int i;
|
|
|
|
if(size <= 0) {
|
|
return;
|
|
}
|
|
|
|
do {
|
|
/* Wait if the writecycle has not finished. */
|
|
start();
|
|
/* 1010 control, 000 address, 0=write --- but only inits address */
|
|
} while(!write_bus(0xa0 | EEPROMADDRESS));
|
|
|
|
|
|
/* Write address to bus, low byte first. */
|
|
write_bus(addr >> 8);
|
|
write_bus(addr & 0xff);
|
|
start();
|
|
/* 1010 control, 000 address, 1=read */
|
|
write_bus(0xa1 | EEPROMADDRESS);
|
|
|
|
for(i = 0; i < (size - 1); ++i){
|
|
buf[i] = read_bus(1);
|
|
}
|
|
buf[size - 1] = read_bus(0);
|
|
stop();
|
|
}
|
|
/*-----------------------------------------------------------------------------------*/
|
|
/**
|
|
* Write bytes to EEPROM using sequencial write.
|
|
*/
|
|
void
|
|
eeprom_write(unsigned short addr, unsigned char *buf,
|
|
int size)
|
|
{
|
|
unsigned int i = 0;
|
|
unsigned int curaddr;
|
|
|
|
if(size <= 0) {
|
|
return;
|
|
}
|
|
|
|
/* Disable write protection. */
|
|
P5OUT &= 0xEF;
|
|
|
|
curaddr = addr;
|
|
for(i = 0; i < size; ++i) {
|
|
/* If we are writing the first byte or are on a 128b page boundary
|
|
we have to start a new write. */
|
|
if(i == 0 || (curaddr & EEPROMPAGEMASK) == 0) {
|
|
do {
|
|
start();
|
|
/* 1010 control, 000 addresse, 0=write */
|
|
} while(!write_bus(0xa0 | EEPROMADDRESS));
|
|
|
|
/* Write the new address to the bus. */
|
|
if(write_bus(curaddr >> 8) == 0) {
|
|
return;
|
|
}
|
|
if(write_bus(curaddr) == 0) {
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Write byte. */
|
|
if(write_bus(buf[i]) == 0) {
|
|
return;
|
|
}
|
|
|
|
/* If we are writing the last byte totally or of a 128b page
|
|
generate a stop condition */
|
|
if(i == size - 1 || (curaddr & EEPROMPAGEMASK) == EEPROMPAGEMASK) {
|
|
stop();
|
|
}
|
|
|
|
++curaddr;
|
|
}
|
|
|
|
/* Enable write protection. */
|
|
P5OUT |= 0x10;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------------------*/
|