mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-08-16 22:28:59 +00:00
Create a dedicated header file with all the definitions for the flash lock bit page and customer configuration area. This avoids duplicating those definitions in the startup-gcc.c files of all CC2538-based platforms, and this also allows to easily manipulate the CCA from outside startup-gcc.c (e.g. for on-the-air firmware update). The definitions are now complete contrary to what was in startup-gcc.c: - Definitions have been added to select the bootloader backdoor pin and active level if enabled. - Definitions have been added to access the page and debug lock bits. The debug lock bit can be used to prevent someone from reading back a programmed firmware through JTAG if the firmware binary image has to be confidential, which should be combined with a disabled bootloader backdoor. - The application entry point is now tied to the beginning of the .text section instead of to the beginning of the flash. This allows projects using custom linker scripts to place the application entry point anywhere in the flash, which can be useful e.g. for on-the-air firmware update. Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
330 lines
13 KiB
C
330 lines
13 KiB
C
/*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* Neither the name of Texas Instruments Incorporated nor the names of
|
|
* its contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/**
|
|
* \addtogroup cc2538
|
|
* @{
|
|
*
|
|
* \file
|
|
* Startup code for the cc2538dk platform, to be used when building with gcc
|
|
*/
|
|
#include "contiki.h"
|
|
#include "reg.h"
|
|
#include "flash-cca.h"
|
|
#include "sys-ctrl.h"
|
|
#include "uart.h"
|
|
|
|
#include <stdint.h>
|
|
/*---------------------------------------------------------------------------*/
|
|
extern int main(void);
|
|
/*---------------------------------------------------------------------------*/
|
|
/* System handlers provided here */
|
|
void reset_handler(void);
|
|
void nmi_handler(void);
|
|
void default_handler(void);
|
|
|
|
/* System Handler and ISR prototypes implemented elsewhere */
|
|
void clock_isr(void); /* SysTick Handler */
|
|
void gpio_port_a_isr(void);
|
|
void gpio_port_b_isr(void);
|
|
void gpio_port_c_isr(void);
|
|
void gpio_port_d_isr(void);
|
|
void rtimer_isr(void);
|
|
void cc2538_rf_rx_tx_isr(void);
|
|
void cc2538_rf_err_isr(void);
|
|
void udma_isr(void);
|
|
void udma_err_isr(void);
|
|
|
|
/* Link in the USB ISR only if USB is enabled */
|
|
#if USB_SERIAL_CONF_ENABLE
|
|
void usb_isr(void);
|
|
#else
|
|
#define usb_isr default_handler
|
|
#endif
|
|
|
|
/* Likewise for the UART[01] ISRs */
|
|
#if UART_CONF_ENABLE
|
|
void uart_isr(void);
|
|
|
|
#if UART_BASE==UART_1_BASE
|
|
#define uart0_isr default_handler
|
|
#define uart1_isr uart_isr
|
|
#else
|
|
#define uart0_isr uart_isr
|
|
#define uart1_isr default_handler
|
|
#endif
|
|
|
|
#else /* UART_CONF_ENABLE */
|
|
#define uart0_isr default_handler
|
|
#define uart1_isr default_handler
|
|
#endif /* UART_CONF_ENABLE */
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Allocate stack space */
|
|
static unsigned long stack[512];
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Linker construct indicating .text section location */
|
|
extern uint8_t _text[0];
|
|
/*---------------------------------------------------------------------------*/
|
|
__attribute__ ((section(".flashcca"), used))
|
|
const flash_cca_lock_page_t __cca = {
|
|
FLASH_CCA_BOOTLDR_CFG_DISABLE, /* Bootloader backdoor disabled */
|
|
FLASH_CCA_IMAGE_VALID, /* Image valid */
|
|
&_text, /* Vector table located at the start of .text */
|
|
/* Unlock all pages and debug */
|
|
{ 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
|
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
|
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
|
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF }
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
__attribute__ ((section(".vectors"), used))
|
|
void(*const vectors[])(void) =
|
|
{
|
|
(void (*)(void))((unsigned long)stack + sizeof(stack)), /* Stack pointer */
|
|
reset_handler, /* Reset handler */
|
|
nmi_handler, /* The NMI handler */
|
|
default_handler, /* The hard fault handler */
|
|
default_handler, /* 4 The MPU fault handler */
|
|
default_handler, /* 5 The bus fault handler */
|
|
default_handler, /* 6 The usage fault handler */
|
|
0, /* 7 Reserved */
|
|
0, /* 8 Reserved */
|
|
0, /* 9 Reserved */
|
|
0, /* 10 Reserved */
|
|
default_handler, /* 11 SVCall handler */
|
|
default_handler, /* 12 Debug monitor handler */
|
|
0, /* 13 Reserved */
|
|
default_handler, /* 14 The PendSV handler */
|
|
clock_isr, /* 15 The SysTick handler */
|
|
gpio_port_a_isr, /* 16 GPIO Port A */
|
|
gpio_port_b_isr, /* 17 GPIO Port B */
|
|
gpio_port_c_isr, /* 18 GPIO Port C */
|
|
gpio_port_d_isr, /* 19 GPIO Port D */
|
|
0, /* 20 none */
|
|
uart0_isr, /* 21 UART0 Rx and Tx */
|
|
uart1_isr, /* 22 UART1 Rx and Tx */
|
|
default_handler, /* 23 SSI0 Rx and Tx */
|
|
default_handler, /* 24 I2C Master and Slave */
|
|
0, /* 25 Reserved */
|
|
0, /* 26 Reserved */
|
|
0, /* 27 Reserved */
|
|
0, /* 28 Reserved */
|
|
0, /* 29 Reserved */
|
|
default_handler, /* 30 ADC Sequence 0 */
|
|
0, /* 31 Reserved */
|
|
0, /* 32 Reserved */
|
|
0, /* 33 Reserved */
|
|
default_handler, /* 34 Watchdog timer, timer 0 */
|
|
default_handler, /* 35 Timer 0 subtimer A */
|
|
default_handler, /* 36 Timer 0 subtimer B */
|
|
default_handler, /* 37 Timer 1 subtimer A */
|
|
default_handler, /* 38 Timer 1 subtimer B */
|
|
default_handler, /* 39 Timer 2 subtimer A */
|
|
default_handler, /* 40 Timer 2 subtimer B */
|
|
default_handler, /* 41 Analog Comparator 0 */
|
|
default_handler, /* 42 RFCore Rx/Tx (Alternate) */
|
|
default_handler, /* 43 RFCore Error (Alternate) */
|
|
default_handler, /* 44 System Control */
|
|
default_handler, /* 45 FLASH Control */
|
|
default_handler, /* 46 AES (Alternate) */
|
|
default_handler, /* 47 PKA (Alternate) */
|
|
default_handler, /* 48 SM Timer (Alternate) */
|
|
default_handler, /* 49 MacTimer (Alternate) */
|
|
default_handler, /* 50 SSI1 Rx and Tx */
|
|
default_handler, /* 51 Timer 3 subtimer A */
|
|
default_handler, /* 52 Timer 3 subtimer B */
|
|
0, /* 53 Reserved */
|
|
0, /* 54 Reserved */
|
|
0, /* 55 Reserved */
|
|
0, /* 56 Reserved */
|
|
0, /* 57 Reserved */
|
|
0, /* 58 Reserved */
|
|
0, /* 59 Reserved */
|
|
0, /* 60 Reserved */
|
|
0, /* 61 Reserved */
|
|
udma_isr, /* 62 uDMA */
|
|
udma_err_isr, /* 63 uDMA Error */
|
|
0, /* 64 64-155 are not in use */
|
|
0, /* 65 */
|
|
0, /* 66 */
|
|
0, /* 67 */
|
|
0, /* 68 */
|
|
0, /* 69 */
|
|
0, /* 70 */
|
|
0, /* 71 */
|
|
0, /* 72 */
|
|
0, /* 73 */
|
|
0, /* 74 */
|
|
0, /* 75 */
|
|
0, /* 76 */
|
|
0, /* 77 */
|
|
0, /* 78 */
|
|
0, /* 79 */
|
|
0, /* 80 */
|
|
0, /* 81 */
|
|
0, /* 82 */
|
|
0, /* 83 */
|
|
0, /* 84 */
|
|
0, /* 85 */
|
|
0, /* 86 */
|
|
0, /* 87 */
|
|
0, /* 88 */
|
|
0, /* 89 */
|
|
0, /* 90 */
|
|
0, /* 91 */
|
|
0, /* 92 */
|
|
0, /* 93 */
|
|
0, /* 94 */
|
|
0, /* 95 */
|
|
0, /* 96 */
|
|
0, /* 97 */
|
|
0, /* 98 */
|
|
0, /* 99 */
|
|
0, /* 100 */
|
|
0, /* 101 */
|
|
0, /* 102 */
|
|
0, /* 103 */
|
|
0, /* 104 */
|
|
0, /* 105 */
|
|
0, /* 106 */
|
|
0, /* 107 */
|
|
0, /* 108 */
|
|
0, /* 109 */
|
|
0, /* 110 */
|
|
0, /* 111 */
|
|
0, /* 112 */
|
|
0, /* 113 */
|
|
0, /* 114 */
|
|
0, /* 115 */
|
|
0, /* 116 */
|
|
0, /* 117 */
|
|
0, /* 118 */
|
|
0, /* 119 */
|
|
0, /* 120 */
|
|
0, /* 121 */
|
|
0, /* 122 */
|
|
0, /* 123 */
|
|
0, /* 124 */
|
|
0, /* 125 */
|
|
0, /* 126 */
|
|
0, /* 127 */
|
|
0, /* 128 */
|
|
0, /* 129 */
|
|
0, /* 130 */
|
|
0, /* 131 */
|
|
0, /* 132 */
|
|
0, /* 133 */
|
|
0, /* 134 */
|
|
0, /* 135 */
|
|
0, /* 136 */
|
|
0, /* 137 */
|
|
0, /* 138 */
|
|
0, /* 139 */
|
|
0, /* 140 */
|
|
0, /* 141 */
|
|
0, /* 142 */
|
|
0, /* 143 */
|
|
0, /* 144 */
|
|
0, /* 145 */
|
|
0, /* 146 */
|
|
0, /* 147 */
|
|
0, /* 148 */
|
|
0, /* 149 */
|
|
0, /* 150 */
|
|
0, /* 151 */
|
|
0, /* 152 */
|
|
0, /* 153 */
|
|
0, /* 154 */
|
|
0, /* 155 */
|
|
usb_isr, /* 156 USB */
|
|
cc2538_rf_rx_tx_isr, /* 157 RFCORE RX/TX */
|
|
cc2538_rf_err_isr, /* 158 RFCORE Error */
|
|
default_handler, /* 159 AES */
|
|
default_handler, /* 160 PKA */
|
|
rtimer_isr, /* 161 SM Timer */
|
|
default_handler, /* 162 MACTimer */
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Linker constructs indicating .data and .bss segment locations */
|
|
extern unsigned long _etext;
|
|
extern unsigned long _data;
|
|
extern unsigned long _edata;
|
|
extern unsigned long _bss;
|
|
extern unsigned long _ebss;
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Weak interrupt handlers. */
|
|
void
|
|
nmi_handler(void)
|
|
{
|
|
reset_handler();
|
|
while(1);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
default_handler(void)
|
|
{
|
|
while(1);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
reset_handler(void)
|
|
{
|
|
unsigned long *pul_src, *pul_dst;
|
|
|
|
REG(SYS_CTRL_EMUOVR) = 0xFF;
|
|
|
|
/* Copy the data segment initializers from flash to SRAM. */
|
|
pul_src = &_etext;
|
|
|
|
for(pul_dst = &_data; pul_dst < &_edata;) {
|
|
*pul_dst++ = *pul_src++;
|
|
}
|
|
|
|
/* Zero-fill the bss segment. */
|
|
__asm(" ldr r0, =_bss\n"
|
|
" ldr r1, =_ebss\n"
|
|
" mov r2, #0\n"
|
|
" .thumb_func\n"
|
|
"zero_loop:\n"
|
|
" cmp r0, r1\n"
|
|
" it lt\n"
|
|
" strlt r2, [r0], #4\n" " blt zero_loop");
|
|
|
|
/* call the application's entry point. */
|
|
main();
|
|
|
|
/* End here if main () returns */
|
|
while(1);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/** @} */
|