mirror of
https://github.com/oliverschmidt/contiki.git
synced 2024-12-23 01:29:33 +00:00
6c6013b898
* We can now very easily switch between UART0 and UART1 through a define * We can also configure the UART RX and TX port/pin through defines
335 lines
13 KiB
C
335 lines
13 KiB
C
/*
|
|
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* Neither the name of Texas Instruments Incorporated nor the names of
|
|
* its contributors may be used to endorse or promote products derived
|
|
* from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
/**
|
|
* \addtogroup cc2538
|
|
* @{
|
|
*
|
|
* \file
|
|
* Startup code for the cc2538dk platform, to be used when building with gcc
|
|
*/
|
|
#include "contiki.h"
|
|
#include "reg.h"
|
|
#include "uart.h"
|
|
|
|
#include <stdint.h>
|
|
|
|
#define FLASH_START_ADDR 0x00200000
|
|
#define BOOTLOADER_BACKDOOR_DISABLE 0xEFFFFFFF
|
|
#define SYS_CTRL_EMUOVR 0x400D20B4
|
|
/*---------------------------------------------------------------------------*/
|
|
extern int main(void);
|
|
/*---------------------------------------------------------------------------*/
|
|
/* System handlers provided here */
|
|
void reset_handler(void);
|
|
void nmi_handler(void);
|
|
void default_handler(void);
|
|
|
|
/* System Handler and ISR prototypes implemented elsewhere */
|
|
void clock_isr(void); /* SysTick Handler */
|
|
void gpio_port_a_isr(void);
|
|
void gpio_port_b_isr(void);
|
|
void gpio_port_c_isr(void);
|
|
void gpio_port_d_isr(void);
|
|
void rtimer_isr(void);
|
|
void cc2538_rf_rx_tx_isr(void);
|
|
void cc2538_rf_err_isr(void);
|
|
void udma_isr(void);
|
|
void udma_err_isr(void);
|
|
|
|
/* Link in the USB ISR only if USB is enabled */
|
|
#if USB_SERIAL_CONF_ENABLE
|
|
void usb_isr(void);
|
|
#else
|
|
#define usb_isr default_handler
|
|
#endif
|
|
|
|
/* Likewise for the UART[01] ISRs */
|
|
#if UART_CONF_ENABLE
|
|
void uart_isr(void);
|
|
|
|
#if UART_BASE==UART_1_BASE
|
|
#define uart0_isr default_handler
|
|
#define uart1_isr uart_isr
|
|
#else
|
|
#define uart0_isr uart_isr
|
|
#define uart1_isr default_handler
|
|
#endif
|
|
|
|
#else /* UART_CONF_ENABLE */
|
|
#define uart0_isr default_handler
|
|
#define uart1_isr default_handler
|
|
#endif /* UART_CONF_ENABLE */
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Allocate stack space */
|
|
static unsigned long stack[512];
|
|
/*---------------------------------------------------------------------------*/
|
|
/*
|
|
* Customer Configuration Area in the Lock Page
|
|
* Holds Image Vector table address (bytes 2012 - 2015) and
|
|
* Image Valid bytes (bytes 2008 -2011)
|
|
*/
|
|
typedef struct {
|
|
unsigned long bootldr_cfg;
|
|
unsigned long image_valid;
|
|
unsigned long image_vector_addr;
|
|
} lock_page_cca_t;
|
|
/*---------------------------------------------------------------------------*/
|
|
__attribute__ ((section(".flashcca"), used))
|
|
const lock_page_cca_t __cca = {
|
|
BOOTLOADER_BACKDOOR_DISABLE, /* Bootloader backdoor disabled */
|
|
0, /* Image valid bytes */
|
|
FLASH_START_ADDR /* Vector table located at the start of flash */
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
__attribute__ ((section(".vectors"), used))
|
|
void(*const vectors[])(void) =
|
|
{
|
|
(void (*)(void))((unsigned long)stack + sizeof(stack)), /* Stack pointer */
|
|
reset_handler, /* Reset handler */
|
|
nmi_handler, /* The NMI handler */
|
|
default_handler, /* The hard fault handler */
|
|
default_handler, /* 4 The MPU fault handler */
|
|
default_handler, /* 5 The bus fault handler */
|
|
default_handler, /* 6 The usage fault handler */
|
|
0, /* 7 Reserved */
|
|
0, /* 8 Reserved */
|
|
0, /* 9 Reserved */
|
|
0, /* 10 Reserved */
|
|
default_handler, /* 11 SVCall handler */
|
|
default_handler, /* 12 Debug monitor handler */
|
|
0, /* 13 Reserved */
|
|
default_handler, /* 14 The PendSV handler */
|
|
clock_isr, /* 15 The SysTick handler */
|
|
gpio_port_a_isr, /* 16 GPIO Port A */
|
|
gpio_port_b_isr, /* 17 GPIO Port B */
|
|
gpio_port_c_isr, /* 18 GPIO Port C */
|
|
gpio_port_d_isr, /* 19 GPIO Port D */
|
|
0, /* 20 none */
|
|
uart0_isr, /* 21 UART0 Rx and Tx */
|
|
uart1_isr, /* 22 UART1 Rx and Tx */
|
|
default_handler, /* 23 SSI0 Rx and Tx */
|
|
default_handler, /* 24 I2C Master and Slave */
|
|
0, /* 25 Reserved */
|
|
0, /* 26 Reserved */
|
|
0, /* 27 Reserved */
|
|
0, /* 28 Reserved */
|
|
0, /* 29 Reserved */
|
|
default_handler, /* 30 ADC Sequence 0 */
|
|
0, /* 31 Reserved */
|
|
0, /* 32 Reserved */
|
|
0, /* 33 Reserved */
|
|
default_handler, /* 34 Watchdog timer, timer 0 */
|
|
default_handler, /* 35 Timer 0 subtimer A */
|
|
default_handler, /* 36 Timer 0 subtimer B */
|
|
default_handler, /* 37 Timer 1 subtimer A */
|
|
default_handler, /* 38 Timer 1 subtimer B */
|
|
default_handler, /* 39 Timer 2 subtimer A */
|
|
default_handler, /* 40 Timer 2 subtimer B */
|
|
default_handler, /* 41 Analog Comparator 0 */
|
|
default_handler, /* 42 RFCore Rx/Tx (Alternate) */
|
|
default_handler, /* 43 RFCore Error (Alternate) */
|
|
default_handler, /* 44 System Control */
|
|
default_handler, /* 45 FLASH Control */
|
|
default_handler, /* 46 AES (Alternate) */
|
|
default_handler, /* 47 PKA (Alternate) */
|
|
default_handler, /* 48 SM Timer (Alternate) */
|
|
default_handler, /* 49 MacTimer (Alternate) */
|
|
default_handler, /* 50 SSI1 Rx and Tx */
|
|
default_handler, /* 51 Timer 3 subtimer A */
|
|
default_handler, /* 52 Timer 3 subtimer B */
|
|
0, /* 53 Reserved */
|
|
0, /* 54 Reserved */
|
|
0, /* 55 Reserved */
|
|
0, /* 56 Reserved */
|
|
0, /* 57 Reserved */
|
|
0, /* 58 Reserved */
|
|
0, /* 59 Reserved */
|
|
0, /* 60 Reserved */
|
|
0, /* 61 Reserved */
|
|
udma_isr, /* 62 uDMA */
|
|
udma_err_isr, /* 63 uDMA Error */
|
|
0, /* 64 64-155 are not in use */
|
|
0, /* 65 */
|
|
0, /* 66 */
|
|
0, /* 67 */
|
|
0, /* 68 */
|
|
0, /* 69 */
|
|
0, /* 70 */
|
|
0, /* 71 */
|
|
0, /* 72 */
|
|
0, /* 73 */
|
|
0, /* 74 */
|
|
0, /* 75 */
|
|
0, /* 76 */
|
|
0, /* 77 */
|
|
0, /* 78 */
|
|
0, /* 79 */
|
|
0, /* 80 */
|
|
0, /* 81 */
|
|
0, /* 82 */
|
|
0, /* 83 */
|
|
0, /* 84 */
|
|
0, /* 85 */
|
|
0, /* 86 */
|
|
0, /* 87 */
|
|
0, /* 88 */
|
|
0, /* 89 */
|
|
0, /* 90 */
|
|
0, /* 91 */
|
|
0, /* 92 */
|
|
0, /* 93 */
|
|
0, /* 94 */
|
|
0, /* 95 */
|
|
0, /* 96 */
|
|
0, /* 97 */
|
|
0, /* 98 */
|
|
0, /* 99 */
|
|
0, /* 100 */
|
|
0, /* 101 */
|
|
0, /* 102 */
|
|
0, /* 103 */
|
|
0, /* 104 */
|
|
0, /* 105 */
|
|
0, /* 106 */
|
|
0, /* 107 */
|
|
0, /* 108 */
|
|
0, /* 109 */
|
|
0, /* 110 */
|
|
0, /* 111 */
|
|
0, /* 112 */
|
|
0, /* 113 */
|
|
0, /* 114 */
|
|
0, /* 115 */
|
|
0, /* 116 */
|
|
0, /* 117 */
|
|
0, /* 118 */
|
|
0, /* 119 */
|
|
0, /* 120 */
|
|
0, /* 121 */
|
|
0, /* 122 */
|
|
0, /* 123 */
|
|
0, /* 124 */
|
|
0, /* 125 */
|
|
0, /* 126 */
|
|
0, /* 127 */
|
|
0, /* 128 */
|
|
0, /* 129 */
|
|
0, /* 130 */
|
|
0, /* 131 */
|
|
0, /* 132 */
|
|
0, /* 133 */
|
|
0, /* 134 */
|
|
0, /* 135 */
|
|
0, /* 136 */
|
|
0, /* 137 */
|
|
0, /* 138 */
|
|
0, /* 139 */
|
|
0, /* 140 */
|
|
0, /* 141 */
|
|
0, /* 142 */
|
|
0, /* 143 */
|
|
0, /* 144 */
|
|
0, /* 145 */
|
|
0, /* 146 */
|
|
0, /* 147 */
|
|
0, /* 148 */
|
|
0, /* 149 */
|
|
0, /* 150 */
|
|
0, /* 151 */
|
|
0, /* 152 */
|
|
0, /* 153 */
|
|
0, /* 154 */
|
|
0, /* 155 */
|
|
usb_isr, /* 156 USB */
|
|
cc2538_rf_rx_tx_isr, /* 157 RFCORE RX/TX */
|
|
cc2538_rf_err_isr, /* 158 RFCORE Error */
|
|
default_handler, /* 159 AES */
|
|
default_handler, /* 160 PKA */
|
|
rtimer_isr, /* 161 SM Timer */
|
|
default_handler, /* 162 MACTimer */
|
|
};
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Linker constructs indicating .data and .bss segment locations */
|
|
extern unsigned long _etext;
|
|
extern unsigned long _data;
|
|
extern unsigned long _edata;
|
|
extern unsigned long _bss;
|
|
extern unsigned long _ebss;
|
|
/*---------------------------------------------------------------------------*/
|
|
/* Weak interrupt handlers. */
|
|
void
|
|
nmi_handler(void)
|
|
{
|
|
reset_handler();
|
|
while(1);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
default_handler(void)
|
|
{
|
|
while(1);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
void
|
|
reset_handler(void)
|
|
{
|
|
unsigned long *pul_src, *pul_dst;
|
|
|
|
REG(SYS_CTRL_EMUOVR) = 0xFF;
|
|
|
|
/* Copy the data segment initializers from flash to SRAM. */
|
|
pul_src = &_etext;
|
|
|
|
for(pul_dst = &_data; pul_dst < &_edata;) {
|
|
*pul_dst++ = *pul_src++;
|
|
}
|
|
|
|
/* Zero-fill the bss segment. */
|
|
__asm(" ldr r0, =_bss\n"
|
|
" ldr r1, =_ebss\n"
|
|
" mov r2, #0\n"
|
|
" .thumb_func\n"
|
|
"zero_loop:\n"
|
|
" cmp r0, r1\n"
|
|
" it lt\n"
|
|
" strlt r2, [r0], #4\n" " blt zero_loop");
|
|
|
|
/* call the application's entry point. */
|
|
main();
|
|
|
|
/* End here if main () returns */
|
|
while(1);
|
|
}
|
|
/*---------------------------------------------------------------------------*/
|
|
|
|
/** @} */
|