contiki/examples/cc2530dk/border-router/README
George Oikonomou ad256e5014 New platform: TI cc2530 Development Kit
This commits adds support for TI's SmartRF05 Eval. Board with cc2530 EMs
Some initial support for cc2531 USB dongles
2012-03-23 14:41:07 +00:00

17 lines
580 B
Plaintext

border-router example for the TI SmartRF05EB with a cc2530EM.
This example is meant to be used with tunslip6 in tools/
- Build the code and load it onto your node
- Connect your node to your PC
- run:
sudo ./tunslip6 -s /dev/ttyUSBx <address v6>/<prefix>
This will setup tun0 on your PC over device /dev/ttyUSBx. The address
argument should contain the v6 address that you want to assign to tun0
The node will use this address to obtain the network prefix
for example:
sudo ./tunslip6 aaaa::1/64
This will use aaaa:: / 64 as the prefix for the 15.4 network.