dos33fsprogs/interlace_demo/pt3_lib_calculate_note.s

579 lines
13 KiB
ArmAsm
Raw Normal View History

2019-09-15 04:38:37 +00:00
;========================================================================
; EVERYTHING IS CYCLE COUNTED
;========================================================================
;=====================================
; Calculate Note
;=====================================
; note offset in X
; FIXME: samples shouldn't cross page boundary
; 7 -- first check
; 38 -- note enabled
; 20 -- sample1
; 30 -- sample2
; 21 -- accumulate
; 15 -- calc tone
; 12 -- note bounds
; 50 -- more tone
; 44 -- done note
;=====
;
; note disabled = 7 + 6 + [????] + 44 = 57
calculate_note:
lda note_a+NOTE_ENABLED,X ; 4
bne note_enabled ; 3
;-1
sta note_a+NOTE_AMPLITUDE,X ; 4
jmp done_note ; 3
note_enabled:
lda note_a+NOTE_SAMPLE_POINTER_H,X ; 4
sta SAMPLE_H ; 3
lda note_a+NOTE_SAMPLE_POINTER_L,X ; 4
sta SAMPLE_L ; 3
lda note_a+NOTE_ORNAMENT_POINTER_H,X ; 4
sta ORNAMENT_H ; 3
lda note_a+NOTE_ORNAMENT_POINTER_L,X ; 4
sta ORNAMENT_L ; 3
lda note_a+NOTE_SAMPLE_POSITION,X ; 4
asl ; 2
asl ; 2
tay ; 2
;===========
; 38
; b0 = pt3->data[a->sample_pointer + a->sample_position * 4];
lda (SAMPLE_L),Y ; 5+
sta sample_b0_smc+1 ; 4
; b1 = pt3->data[a->sample_pointer + a->sample_position * 4 + 1];
iny ; 2
lda (SAMPLE_L),Y ; 5+
sta sample_b1_smc+1 ; 4
;=============
; 20
; a->tone = pt3->data[a->sample_pointer + a->sample_position*4+2];
; a->tone+=(pt3->data[a->sample_pointer + a->sample_position*4+3])<<8;
; a->tone += a->tone_accumulator;
iny ; 2
lda (SAMPLE_L),Y ; 5+
adc note_a+NOTE_TONE_ACCUMULATOR_L,X ; 4
sta note_a+NOTE_TONE_L,X ; 4
iny ; 2
lda (SAMPLE_L),Y ; 5+
adc note_a+NOTE_TONE_ACCUMULATOR_H,X ; 4
sta note_a+NOTE_TONE_H,X ; 4
;============
; 30
;=============================
; Accumulate tone if set
; (if sample_b1 & $40)
; set = 7+14 = 21
; no-set = 7+[14] = 21
bit sample_b1_smc+1 ; 4
bvc no_accum_waste ; (so, if b1&0x40 is zero, skip it) ; 3
; -1
sta note_a+NOTE_TONE_ACCUMULATOR_H,X ; 4
lda note_a+NOTE_TONE_L,X ; tone_accumulator=tone ; 4
sta note_a+NOTE_TONE_ACCUMULATOR_L,X ; 4
jmp no_accum_real ; 3
no_accum_waste:
inc CYCLE_WASTE ; 5
inc CYCLE_WASTE ; 5
nop ; 2
nop ; 2
no_accum_real:
;============
; 21
;============================
; Calculate tone
; j = a->note + (pt3->data[a->ornament_pointer + a->ornament_position]
clc ;;can be removed if ADC ACCUMULATOR_H cannot overflow ; 2
ldy note_a+NOTE_ORNAMENT_POSITION,X ; 4
lda (ORNAMENT_L),Y ; 5+
adc note_a+NOTE_NOTE,X ; 4
;============
; 15
; <0 -- 3+4+[5] = 12
; >95 -- 3+5+4 = 12
; just right --3+5+[4] = 12
; if (j < 0) j = 0;
bpl note_not_negative ; 3
; -1
lda #0 ; 2
jmp note_just_right_waste5 ; 3
; if (j > 95) j = 95;
note_not_negative:
cmp #96 ; 2
bcc note_not_too_high ; blt ; 3
; -1
lda #95 ; 2
jmp note_just_right_waste4 ; 3
note_not_too_high:
note_just_right_waste5:
nop ; 2
jmp note_just_right ; 3
note_just_right_waste4:
nop ; 2
nop ; 2
;===========
; 12
note_just_right:
; w = GetNoteFreq(j,pt3->frequency_table);
tay ; for GetNoteFreq later ; 2
; a->tone = (a->tone + a->tone_sliding + w) & 0xfff;
clc ; 2
lda note_a+NOTE_TONE_SLIDING_L,X ; 4
adc note_a+NOTE_TONE_L,X ; 4
sta temp_word_l1_smc+1 ; 4
lda note_a+NOTE_TONE_H,X ; 4
adc note_a+NOTE_TONE_SLIDING_H,X ; 4
sta temp_word_h1_smc+1 ; 4
clc ;;can be removed if ADC SLIDING_H cannot overflow ; 2
temp_word_l1_smc:
lda #$d1 ; 2
adc NoteTable_low,Y ; GetNoteFreq ; 4
sta note_a+NOTE_TONE_L,X ; 4
temp_word_h1_smc:
lda #$d1 ; 2
adc NoteTable_high,Y ; GetNoteFreq ; 4
and #$0f ; 2
sta note_a+NOTE_TONE_H,X ; 4
;===========
; 50
;=====================
; handle tone sliding
; if (a->tone_slide_count > 0) {
lda note_a+NOTE_TONE_SLIDE_COUNT,X ; 4
bmi no_tone_sliding ; 3
; -1
beq no_tone_sliding ; 3
; -1
; a->tone_slide_count--;
dec note_a+NOTE_TONE_SLIDE_COUNT,X ; 6
; if (a->tone_slide_count==0) {
bne no_tone_sliding ; 3
; -1
; a->tone_sliding+=a->tone_slide_step
clc ;;can be removed if ADC freq_h cannot overflow ; 2
lda note_a+NOTE_TONE_SLIDING_L,X ; 4
adc note_a+NOTE_TONE_SLIDE_STEP_L,X ; 4
sta note_a+NOTE_TONE_SLIDING_L,X ; 4
tay ; save NOTE_TONE_SLIDING_L in y ; 2
lda note_a+NOTE_TONE_SLIDING_H,X ; 4
adc note_a+NOTE_TONE_SLIDE_STEP_H,X ; 4
sta note_a+NOTE_TONE_SLIDING_H,X ; 4
; a->tone_slide_count = a->tone_slide_delay;
lda note_a+NOTE_TONE_SLIDE_DELAY,X ; 4
sta note_a+NOTE_TONE_SLIDE_COUNT,X ; 4
lda note_a+NOTE_SIMPLE_GLISS,X ; 4
bne no_tone_sliding ; if (!a->simplegliss) { ; 3
; -1
check1:
lda note_a+NOTE_TONE_SLIDE_STEP_H,X ; 4
bpl check2 ; 3
; if ( ((a->tone_slide_step < 0) && ; -1
; (a->tone_sliding <= a->tone_delta) ||
; 16 bit signed compare
tya ; y has NOTE_TONE_SLIDING_L ; 2
cmp note_a+NOTE_TONE_DELTA_L,X ; NUM1-NUM2 ; 4
lda note_a+NOTE_TONE_SLIDING_H,X ; 4
sbc note_a+NOTE_TONE_DELTA_H,X ; 4
bvc sc_loser1 ; N eor V ; 3
; -1
eor #$80 ; 2
sc_loser1:
; then A (signed) < NUM (signed) and BMI will branch
bmi slide_to_note ; 3
; -1
; equals case
tya ; y has NOTE_TONE_SLIDING_L ; 2
cmp note_a+NOTE_TONE_DELTA_L,X ; 4
bne check2 ; 3
; -1
lda note_a+NOTE_TONE_SLIDING_H,X ; 4
cmp note_a+NOTE_TONE_DELTA_H,X ; 4
beq slide_to_note ; 3
; -1
check2:
lda note_a+NOTE_TONE_SLIDE_STEP_H,X ; 4
bmi no_tone_sliding ; 3
; ((a->tone_slide_step >= 0) &&
; (a->tone_sliding >= a->tone_delta)
; -1
; 16 bit signed compare
tya ; y has NOTE_TONE_SLIDING_L ; 2
cmp note_a+NOTE_TONE_DELTA_L,X ; num1-num2 ; 4
lda note_a+NOTE_TONE_SLIDING_H,X ; 4
sbc note_a+NOTE_TONE_DELTA_H,X ; 4
bvc sc_loser2 ; N eor V ; 3
; -1
eor #$80 ; 2
sc_loser2:
; then A (signed) < NUM (signed) and BMI will branch
bmi no_tone_sliding ; 3
; -1
slide_to_note:
; a->note = a->slide_to_note;
lda note_a+NOTE_SLIDE_TO_NOTE,X ; 4
sta note_a+NOTE_NOTE,X ; 4
lda #0 ; 2
sta note_a+NOTE_TONE_SLIDE_COUNT,X ; 4
sta note_a+NOTE_TONE_SLIDING_L,X ; 4
sta note_a+NOTE_TONE_SLIDING_H,X ; 4
no_tone_sliding:
;=========================
; Calculate the amplitude
;=========================
calc_amplitude:
; get base value from the sample (bottom 4 bits of sample_b1)
sample_b1_smc:
lda #$d1 ; a->amplitude= (b1 & 0xf); ; 2
and #$f ; 2
;========================================
; if b0 top bit is set, it means sliding
; adjust amplitude sliding
bit sample_b0_smc+1 ; if ((b0 & 0x80)!=0) { ; 4
bpl done_amp_sliding ; so if top bit not set, skip ; 3
; -1
tay ; 2
;================================
; if top bits 0b11 then slide up
; if top bits 0b10 then slide down
; if ((b0 & 0x40)!=0) {
lda note_a+NOTE_AMPLITUDE_SLIDING,X ; 4
sec ; 2
bvc amp_slide_down ; 3
; -1
amp_slide_up:
; if (a->amplitude_sliding < 15) {
; a pain to do signed compares
sbc #15 ; 2
bvc asu_signed ; 3
; -1
eor #$80 ; 2
asu_signed:
bpl done_amp_sliding ; skip if A>=15 ; 2
; a->amplitude_sliding++;
inc note_a+NOTE_AMPLITUDE_SLIDING,X ; 5?
bne done_amp_sliding_y ; 3
; -1
amp_slide_down:
; if (a->amplitude_sliding > -15) {
; a pain to do signed compares
sbc #$f1 ; -15 ; 2
bvc asd_signed ; 3
; -1
eor #$80 ; 2
asd_signed:
bmi done_amp_sliding ; if A < -15, skip subtract ; 3
; a->amplitude_sliding--;
dec note_a+NOTE_AMPLITUDE_SLIDING,X ; 5?
done_amp_sliding_y:
tya ; 2
done_amp_sliding:
; a->amplitude+=a->amplitude_sliding;
clc ; 2
adc note_a+NOTE_AMPLITUDE_SLIDING,X ; 4
; clamp amplitude to 0 - 15
check_amp_lo:
bmi write_clamp_amplitude ; 3
; -1
check_amp_hi:
cmp #16 ; 2
bcc write_amplitude ; blt ; 3
; -1
lda #15 ; 2
.byte $2C ;????
write_clamp_amplitude:
lda #0 ;????
write_amplitude:
sta note_amp_smc+1 ; 4
done_clamp_amplitude:
; We generate the proper table at runtime now
; so always in Volume Table
; a->amplitude = PT3VolumeTable_33_34[a->volume][a->amplitude];
; a->amplitude = PT3VolumeTable_35[a->volume][a->amplitude];
lda note_a+NOTE_VOLUME,X ; 4
asl ; 2
asl ; 2
asl ; 2
asl ; 2
note_amp_smc:
ora #$d1 ; 2
tay ; 2
lda VolumeTable,Y ; 4
sta note_a+NOTE_AMPLITUDE,X ; 4
done_table:
check_envelope_enable:
; Bottom bit of b0 indicates our sample has envelope
; Also make sure envelopes are enabled
; if (((b0 & 0x1) == 0) && ( a->envelope_enabled)) {
sample_b0_smc:
lda #$d1 ; 2
lsr ; 2
tay ; 2
bcs envelope_slide ; 3
; -1
lda note_a+NOTE_ENVELOPE_ENABLED,X ; 4
beq envelope_slide ; 3
; -1
; Bit 4 of the per-channel AY-3-8910 amplitude specifies
; envelope enabled
lda note_a+NOTE_AMPLITUDE,X ; a->amplitude |= 16; ; 4
ora #$10 ; 2
sta note_a+NOTE_AMPLITUDE,X ; 4
envelope_slide:
; Envelope slide
; If b1 top bits are 10 or 11
lda sample_b0_smc+1 ; 4
asl ; 2
asl ; 2
asl ; b0 bit 5 to carry flag ; 2
lda #$20 ; 2
; b1 bit 7 to sign flag, bit 5 to zero flag
bit sample_b1_smc+1 ; 4?
php ; 4?
bpl else_noise_slide ; if ((b1 & 0x80) != 0) { ; 3
; -1
tya ; 2
ora #$f0 ; 2
bcs envelope_slide_down ; if ((b0 & 0x20) == 0) { ; 3
; -1
envelope_slide_up:
; j = ((b0>>1)&0xF) + a->envelope_sliding;
and #$0f ; 2
clc ; 2
envelope_slide_down:
; j = ((b0>>1)|0xF0) + a->envelope_sliding
adc note_a+NOTE_ENVELOPE_SLIDING,X ; 4
sta e_slide_amount_smc+1 ; j ; 4
envelope_slide_done:
plp ; 4?
beq last_envelope ; if (( b1 & 0x20) != 0) { ; 3
; -1
; a->envelope_sliding = j;
sta note_a+NOTE_ENVELOPE_SLIDING,X ; 4
last_envelope:
; pt3->envelope_add+=j;
clc ; 2
e_slide_amount_smc:
lda #$d1 ; 2
adc pt3_envelope_add_smc+1 ; 4
sta pt3_envelope_add_smc+1 ; 4
jmp noise_slide_done ; skip else ; 3
else_noise_slide:
; Noise slide
; else {
; pt3->noise_add = (b0>>1) + a->noise_sliding;
tya ; 2
clc ; 2
adc note_a+NOTE_NOISE_SLIDING,X ; 4
sta pt3_noise_add_smc+1 ; 4
plp ; 4?
beq noise_slide_done ; if ((b1 & 0x20) != 0) { ; 3
; -1
; noise_sliding = pt3_noise_add
sta note_a+NOTE_NOISE_SLIDING,X ; 4
noise_slide_done:
;======================
; set mixer
; pt3->mixer_value = ((b1 >>1) & 0x48) | pt3->mixer_value;
lda sample_b1_smc+1 ; 4
lsr ; 2
and #$48 ; 2
ora PT3_MIXER_VAL ; 3
sta PT3_MIXER_VAL ; 3
;========================
; increment sample position
; a->sample_position++;
inc note_a+NOTE_SAMPLE_POSITION,X ; 5?
lda note_a+NOTE_SAMPLE_POSITION,X ; 4
cmp note_a+NOTE_SAMPLE_LENGTH,X ; 4
bcc sample_pos_ok ; blt ; 3
; -1
lda note_a+NOTE_SAMPLE_LOOP,X ; 4
sta note_a+NOTE_SAMPLE_POSITION,X ; 4
sample_pos_ok:
;============================
; increment ornament position
; a->ornament_position++;
inc note_a+NOTE_ORNAMENT_POSITION,X ; 5?
lda note_a+NOTE_ORNAMENT_POSITION,X ; 4
cmp note_a+NOTE_ORNAMENT_LENGTH,X ; 4
bcc ornament_pos_ok ; blt ; 3
; -1
lda note_a+NOTE_ORNAMENT_LOOP,X ; 4
sta note_a+NOTE_ORNAMENT_POSITION,X ; 4
ornament_pos_ok:
done_note:
; set mixer value
; this is a bit complex (from original code)
; after 3 calls it is set up properly
lsr PT3_MIXER_VAL ; 5
;=============================
; 7+ [26] + 6 = 39 // onoff==0
; 7+ 4 + 12 + 6 + 4 + 6 = 39 // onoff counted down to 0, do_onoff
; 7+ 4 + 12 + 6 + 4 + 6 = 39 // onoff counted down to 0, do_offon
; 7+ 4 + [18] + 4 + 6 = 39 // otherwise
handle_onoff:
ldy note_a+NOTE_ONOFF,X ;if (a->onoff>0) { ; 4
beq done_onoff_kill_26 ; 3
;============
; 7
; -1
dey ; a->onoff--; ; 2
bne put_offon_kill_18 ; if (a->onoff==0) { ; 3
;============
; 4
; -1
lda note_a+NOTE_ENABLED,X ; 4
eor #$1 ; toggle note_enabled ; 2
sta note_a+NOTE_ENABLED,X ; 4
beq do_offon ; 3
;============
; 12
do_onoff:
; -1
; if (a->enabled) a->onoff=a->onoff_delay;
ldy note_a+NOTE_ONOFF_DELAY,X ; 4
jmp put_offon ; 3
;============
; 6
do_offon:
; else a->onoff=a->offon_delay;
ldy note_a+NOTE_OFFON_DELAY,X ; 4
nop ; make things match ; 2
;============
; 6
put_offon:
sty note_a+NOTE_ONOFF,X ; 4
;============
; 4
done_onoff:
rts ; 6
done_onoff_kill_26:
inc CYCLE_WASTE ; 5
lda CYCLE_WASTE ; 3
inc CYCLE_WASTE ; 5
inc CYCLE_WASTE ; 5
inc CYCLE_WASTE ; 5
jmp done_onoff ; 3
put_offon_kill_18:
inc CYCLE_WASTE ; 5
inc CYCLE_WASTE ; 5
inc CYCLE_WASTE ; 5
jmp put_offon ; 3