interlace: use jump table for some of decode

This commit is contained in:
Vince Weaver 2019-09-14 17:10:44 -04:00
parent ac5b22d700
commit 9222100623

View File

@ -419,81 +419,90 @@ temp_word_h1_smc:
;=====================
; handle tone sliding
lda note_a+NOTE_TONE_SLIDE_COUNT,X
bmi no_tone_sliding ; if (a->tone_slide_count > 0) {
beq no_tone_sliding
dec note_a+NOTE_TONE_SLIDE_COUNT,X ; a->tone_slide_count--;
bne no_tone_sliding ; if (a->tone_slide_count==0) {
; if (a->tone_slide_count > 0) {
lda note_a+NOTE_TONE_SLIDE_COUNT,X ; 4
bmi no_tone_sliding ; 3
; -1
beq no_tone_sliding ; 3
; -1
; a->tone_slide_count--;
dec note_a+NOTE_TONE_SLIDE_COUNT,X ; 6
; if (a->tone_slide_count==0) {
bne no_tone_sliding ; 3
; -1
; a->tone_sliding+=a->tone_slide_step
clc ;;can be removed if ADC freq_h cannot overflow
lda note_a+NOTE_TONE_SLIDING_L,X
adc note_a+NOTE_TONE_SLIDE_STEP_L,X
sta note_a+NOTE_TONE_SLIDING_L,X
tay ; save NOTE_TONE_SLIDING_L in y
lda note_a+NOTE_TONE_SLIDING_H,X
adc note_a+NOTE_TONE_SLIDE_STEP_H,X
sta note_a+NOTE_TONE_SLIDING_H,X
clc ;;can be removed if ADC freq_h cannot overflow ; 2
lda note_a+NOTE_TONE_SLIDING_L,X ; 4
adc note_a+NOTE_TONE_SLIDE_STEP_L,X ; 4
sta note_a+NOTE_TONE_SLIDING_L,X ; 4
tay ; save NOTE_TONE_SLIDING_L in y ; 2
lda note_a+NOTE_TONE_SLIDING_H,X ; 4
adc note_a+NOTE_TONE_SLIDE_STEP_H,X ; 4
sta note_a+NOTE_TONE_SLIDING_H,X ; 4
; a->tone_slide_count = a->tone_slide_delay;
lda note_a+NOTE_TONE_SLIDE_DELAY,X
sta note_a+NOTE_TONE_SLIDE_COUNT,X
lda note_a+NOTE_SIMPLE_GLISS,X
bne no_tone_sliding ; if (!a->simplegliss) {
; FIXME: do these need to be signed compares?
lda note_a+NOTE_TONE_SLIDE_DELAY,X ; 4
sta note_a+NOTE_TONE_SLIDE_COUNT,X ; 4
lda note_a+NOTE_SIMPLE_GLISS,X ; 4
bne no_tone_sliding ; if (!a->simplegliss) { ; 3
; -1
check1:
lda note_a+NOTE_TONE_SLIDE_STEP_H,X
bpl check2 ; if ( ((a->tone_slide_step < 0) &&
lda note_a+NOTE_TONE_SLIDE_STEP_H,X ; 4
bpl check2 ; 3
; if ( ((a->tone_slide_step < 0) && ; -1
; (a->tone_sliding <= a->tone_delta) ||
; 16 bit signed compare
tya ; y has NOTE_TONE_SLIDING_L
cmp note_a+NOTE_TONE_DELTA_L,X ; NUM1-NUM2
lda note_a+NOTE_TONE_SLIDING_H,X
sbc note_a+NOTE_TONE_DELTA_H,X
bvc sc_loser1 ; N eor V
eor #$80
tya ; y has NOTE_TONE_SLIDING_L ; 2
cmp note_a+NOTE_TONE_DELTA_L,X ; NUM1-NUM2 ; 4
lda note_a+NOTE_TONE_SLIDING_H,X ; 4
sbc note_a+NOTE_TONE_DELTA_H,X ; 4
bvc sc_loser1 ; N eor V ; 3
; -1
eor #$80 ; 2
sc_loser1:
bmi slide_to_note ; then A (signed) < NUM (signed) and BMI will branch
; then A (signed) < NUM (signed) and BMI will branch
bmi slide_to_note ; 3
; -1
; equals case
tya ; y has NOTE_TONE_SLIDING_L
cmp note_a+NOTE_TONE_DELTA_L,X
bne check2
lda note_a+NOTE_TONE_SLIDING_H,X
cmp note_a+NOTE_TONE_DELTA_H,X
beq slide_to_note
tya ; y has NOTE_TONE_SLIDING_L ; 2
cmp note_a+NOTE_TONE_DELTA_L,X ; 4
bne check2 ; 3
; -1
lda note_a+NOTE_TONE_SLIDING_H,X ; 4
cmp note_a+NOTE_TONE_DELTA_H,X ; 4
beq slide_to_note ; 3
; -1
check2:
lda note_a+NOTE_TONE_SLIDE_STEP_H,X
bmi no_tone_sliding ; ((a->tone_slide_step >= 0) &&
lda note_a+NOTE_TONE_SLIDE_STEP_H,X ; 4
bmi no_tone_sliding ; 3
; ((a->tone_slide_step >= 0) &&
; (a->tone_sliding >= a->tone_delta)
; -1
; 16 bit signed compare
tya ; y has NOTE_TONE_SLIDING_L
cmp note_a+NOTE_TONE_DELTA_L,X ; num1-num2
lda note_a+NOTE_TONE_SLIDING_H,X
sbc note_a+NOTE_TONE_DELTA_H,X
bvc sc_loser2 ; N eor V
eor #$80
tya ; y has NOTE_TONE_SLIDING_L ; 2
cmp note_a+NOTE_TONE_DELTA_L,X ; num1-num2 ; 4
lda note_a+NOTE_TONE_SLIDING_H,X ; 4
sbc note_a+NOTE_TONE_DELTA_H,X ; 4
bvc sc_loser2 ; N eor V ; 3
; -1
eor #$80 ; 2
sc_loser2:
bmi no_tone_sliding ; then A (signed) < NUM (signed) and BMI will branch
; then A (signed) < NUM (signed) and BMI will branch
bmi no_tone_sliding ; 3
; -1
slide_to_note:
; a->note = a->slide_to_note;
lda note_a+NOTE_SLIDE_TO_NOTE,X
sta note_a+NOTE_NOTE,X
lda #0
sta note_a+NOTE_TONE_SLIDE_COUNT,X
sta note_a+NOTE_TONE_SLIDING_L,X
sta note_a+NOTE_TONE_SLIDING_H,X
lda note_a+NOTE_SLIDE_TO_NOTE,X ; 4
sta note_a+NOTE_NOTE,X ; 4
lda #0 ; 2
sta note_a+NOTE_TONE_SLIDE_COUNT,X ; 4
sta note_a+NOTE_TONE_SLIDING_L,X ; 4
sta note_a+NOTE_TONE_SLIDING_H,X ; 4
no_tone_sliding:
@ -505,72 +514,80 @@ calc_amplitude:
; get base value from the sample (bottom 4 bits of sample_b1)
sample_b1_smc:
lda #$d1 ; a->amplitude= (b1 & 0xf);
and #$f
lda #$d1 ; a->amplitude= (b1 & 0xf); ; 2
and #$f ; 2
;========================================
; if b0 top bit is set, it means sliding
; adjust amplitude sliding
bit sample_b0_smc+1 ; if ((b0 & 0x80)!=0) {
bpl done_amp_sliding ; so if top bit not set, skip
tay
bit sample_b0_smc+1 ; if ((b0 & 0x80)!=0) { ; 4
bpl done_amp_sliding ; so if top bit not set, skip ; 3
; -1
tay ; 2
;================================
; if top bits 0b11 then slide up
; if top bits 0b10 then slide down
; if ((b0 & 0x40)!=0) {
lda note_a+NOTE_AMPLITUDE_SLIDING,X
sec
bvc amp_slide_down
lda note_a+NOTE_AMPLITUDE_SLIDING,X ; 4
sec ; 2
bvc amp_slide_down ; 3
; -1
amp_slide_up:
; if (a->amplitude_sliding < 15) {
; a pain to do signed compares
sbc #15
bvc asu_signed
eor #$80
sbc #15 ; 2
bvc asu_signed ; 3
; -1
eor #$80 ; 2
asu_signed:
bpl done_amp_sliding ; skip if A>=15
inc note_a+NOTE_AMPLITUDE_SLIDING,X ; a->amplitude_sliding++;
bne done_amp_sliding_y
bpl done_amp_sliding ; skip if A>=15 ; 2
; a->amplitude_sliding++;
inc note_a+NOTE_AMPLITUDE_SLIDING,X ; 5?
bne done_amp_sliding_y ; 3
; -1
amp_slide_down:
; if (a->amplitude_sliding > -15) {
; a pain to do signed compares
sbc #$f1 ; -15
bvc asd_signed
eor #$80
sbc #$f1 ; -15 ; 2
bvc asd_signed ; 3
; -1
eor #$80 ; 2
asd_signed:
bmi done_amp_sliding ; if A < -15, skip subtract
bmi done_amp_sliding ; if A < -15, skip subtract ; 3
dec note_a+NOTE_AMPLITUDE_SLIDING,X ; a->amplitude_sliding--;
; a->amplitude_sliding--;
dec note_a+NOTE_AMPLITUDE_SLIDING,X ; 5?
done_amp_sliding_y:
tya
tya ; 2
done_amp_sliding:
; a->amplitude+=a->amplitude_sliding;
clc
adc note_a+NOTE_AMPLITUDE_SLIDING,X
clc ; 2
adc note_a+NOTE_AMPLITUDE_SLIDING,X ; 4
; clamp amplitude to 0 - 15
check_amp_lo:
bmi write_clamp_amplitude
bmi write_clamp_amplitude ; 3
; -1
check_amp_hi:
cmp #16
bcc write_amplitude ; blt
lda #15
.byte $2C
cmp #16 ; 2
bcc write_amplitude ; blt ; 3
; -1
lda #15 ; 2
.byte $2C ;????
write_clamp_amplitude:
lda #0
lda #0 ;????
write_amplitude:
sta note_amp_smc+1
sta note_amp_smc+1 ; 4
done_clamp_amplitude:
@ -579,17 +596,17 @@ done_clamp_amplitude:
; a->amplitude = PT3VolumeTable_33_34[a->volume][a->amplitude];
; a->amplitude = PT3VolumeTable_35[a->volume][a->amplitude];
lda note_a+NOTE_VOLUME,X ; 4+
lda note_a+NOTE_VOLUME,X ; 4
asl ; 2
asl ; 2
asl ; 2
asl ; 2
note_amp_smc:
ora #$d1 ; 4+
ora #$d1 ; 2
tay ; 2
lda VolumeTable,Y ; 4+
sta note_a+NOTE_AMPLITUDE,X ; 5
lda VolumeTable,Y ; 4
sta note_a+NOTE_AMPLITUDE,X ; 4
done_table:
@ -601,21 +618,23 @@ check_envelope_enable:
; if (((b0 & 0x1) == 0) && ( a->envelope_enabled)) {
sample_b0_smc:
lda #$d1
lsr
tay
bcs envelope_slide
lda #$d1 ; 2
lsr ; 2
tay ; 2
bcs envelope_slide ; 3
; -1
lda note_a+NOTE_ENVELOPE_ENABLED,X
beq envelope_slide
lda note_a+NOTE_ENVELOPE_ENABLED,X ; 4
beq envelope_slide ; 3
; -1
; Bit 4 of the per-channel AY-3-8910 amplitude specifies
; envelope enabled
lda note_a+NOTE_AMPLITUDE,X ; a->amplitude |= 16;
ora #$10
sta note_a+NOTE_AMPLITUDE,X
lda note_a+NOTE_AMPLITUDE,X ; a->amplitude |= 16; ; 4
ora #$10 ; 2
sta note_a+NOTE_AMPLITUDE,X ; 4
envelope_slide:
@ -623,72 +642,76 @@ envelope_slide:
; Envelope slide
; If b1 top bits are 10 or 11
lda sample_b0_smc+1
asl
asl
asl ; b0 bit 5 to carry flag
lda #$20
bit sample_b1_smc+1 ; b1 bit 7 to sign flag, bit 5 to zero flag
php
bpl else_noise_slide ; if ((b1 & 0x80) != 0) {
tya
ora #$f0
bcs envelope_slide_down ; if ((b0 & 0x20) == 0) {
lda sample_b0_smc+1 ; 4
asl ; 2
asl ; 2
asl ; b0 bit 5 to carry flag ; 2
lda #$20 ; 2
; b1 bit 7 to sign flag, bit 5 to zero flag
bit sample_b1_smc+1 ; 4?
php ; 4?
bpl else_noise_slide ; if ((b1 & 0x80) != 0) { ; 3
; -1
tya ; 2
ora #$f0 ; 2
bcs envelope_slide_down ; if ((b0 & 0x20) == 0) { ; 3
; -1
envelope_slide_up:
; j = ((b0>>1)&0xF) + a->envelope_sliding;
and #$0f
clc
and #$0f ; 2
clc ; 2
envelope_slide_down:
; j = ((b0>>1)|0xF0) + a->envelope_sliding
adc note_a+NOTE_ENVELOPE_SLIDING,X
sta e_slide_amount_smc+1 ; j
adc note_a+NOTE_ENVELOPE_SLIDING,X ; 4
sta e_slide_amount_smc+1 ; j ; 4
envelope_slide_done:
plp
beq last_envelope ; if (( b1 & 0x20) != 0) {
plp ; 4?
beq last_envelope ; if (( b1 & 0x20) != 0) { ; 3
; -1
; a->envelope_sliding = j;
sta note_a+NOTE_ENVELOPE_SLIDING,X
sta note_a+NOTE_ENVELOPE_SLIDING,X ; 4
last_envelope:
; pt3->envelope_add+=j;
clc
clc ; 2
e_slide_amount_smc:
lda #$d1
adc pt3_envelope_add_smc+1
sta pt3_envelope_add_smc+1
lda #$d1 ; 2
adc pt3_envelope_add_smc+1 ; 4
sta pt3_envelope_add_smc+1 ; 4
jmp noise_slide_done ; skip else
jmp noise_slide_done ; skip else ; 3
else_noise_slide:
; Noise slide
; else {
; pt3->noise_add = (b0>>1) + a->noise_sliding;
tya
clc
adc note_a+NOTE_NOISE_SLIDING,X
sta pt3_noise_add_smc+1
plp
beq noise_slide_done ; if ((b1 & 0x20) != 0) {
tya ; 2
clc ; 2
adc note_a+NOTE_NOISE_SLIDING,X ; 4
sta pt3_noise_add_smc+1 ; 4
plp ; 4?
beq noise_slide_done ; if ((b1 & 0x20) != 0) { ; 3
; -1
; noise_sliding = pt3_noise_add
sta note_a+NOTE_NOISE_SLIDING,X
sta note_a+NOTE_NOISE_SLIDING,X ; 4
noise_slide_done:
;======================
; set mixer
lda sample_b1_smc+1 ; pt3->mixer_value = ((b1 >>1) & 0x48) | pt3->mixer_value;
lsr
and #$48
; pt3->mixer_value = ((b1 >>1) & 0x48) | pt3->mixer_value;
lda sample_b1_smc+1 ; 4
lsr ; 2
and #$48 ; 2
ora PT3_MIXER_VAL ; 3
sta PT3_MIXER_VAL ; 3
@ -697,29 +720,33 @@ noise_slide_done:
;========================
; increment sample position
inc note_a+NOTE_SAMPLE_POSITION,X ; a->sample_position++;
; a->sample_position++;
inc note_a+NOTE_SAMPLE_POSITION,X ; 5?
lda note_a+NOTE_SAMPLE_POSITION,X
cmp note_a+NOTE_SAMPLE_LENGTH,X
lda note_a+NOTE_SAMPLE_POSITION,X ; 4
cmp note_a+NOTE_SAMPLE_LENGTH,X ; 4
bcc sample_pos_ok ; blt
bcc sample_pos_ok ; blt ; 3
; -1
lda note_a+NOTE_SAMPLE_LOOP,X
sta note_a+NOTE_SAMPLE_POSITION,X
lda note_a+NOTE_SAMPLE_LOOP,X ; 4
sta note_a+NOTE_SAMPLE_POSITION,X ; 4
sample_pos_ok:
;========================
;============================
; increment ornament position
inc note_a+NOTE_ORNAMENT_POSITION,X ; a->ornament_position++;
lda note_a+NOTE_ORNAMENT_POSITION,X
cmp note_a+NOTE_ORNAMENT_LENGTH,X
; a->ornament_position++;
inc note_a+NOTE_ORNAMENT_POSITION,X ; 5?
lda note_a+NOTE_ORNAMENT_POSITION,X ; 4
cmp note_a+NOTE_ORNAMENT_LENGTH,X ; 4
bcc ornament_pos_ok ; blt
bcc ornament_pos_ok ; blt ; 3
; -1
lda note_a+NOTE_ORNAMENT_LOOP,X
sta note_a+NOTE_ORNAMENT_POSITION,X
lda note_a+NOTE_ORNAMENT_LOOP,X ; 4
sta note_a+NOTE_ORNAMENT_POSITION,X ; 4
ornament_pos_ok:
@ -823,21 +850,28 @@ stop_decoding:
pt3_decode_line:
; decode_note(&pt3->a,&(pt3->a_addr),pt3);
ldx #(NOTE_STRUCT_SIZE*0)
jsr decode_note
ldx #(NOTE_STRUCT_SIZE*0) ; 2
jsr decode_note ; 6+??
; decode_note(&pt3->b,&(pt3->b_addr),pt3);
ldx #(NOTE_STRUCT_SIZE*1)
jsr decode_note
ldx #(NOTE_STRUCT_SIZE*1) ; 2
jsr decode_note ; 6+??
; decode_note(&pt3->c,&(pt3->c_addr),pt3);
ldx #(NOTE_STRUCT_SIZE*2)
ldx #(NOTE_STRUCT_SIZE*2) ; 2
;;jsr decode_note ; fall through
; if (pt3->a.all_done && pt3->b.all_done && pt3->c.all_done) {
; return 1;
; }
;=================================
;=================================
; decode note
;=================================
;=================================
decode_note:
; Init vars
@ -846,35 +880,33 @@ decode_note:
sty spec_command_smc+1 ; 4
; Skip decode if note still running
lda note_a+NOTE_LEN_COUNT,X ; 4+
lda note_a+NOTE_LEN_COUNT,X ; 4
cmp #2 ; 2
bcs stop_decoding ; blt, assume not negative ; 2/3
bcs stop_decoding ; blt, assume not negative ; 3
; -1
keep_decoding:
lda note_a+NOTE_NOTE,X ; store prev note ; 4+
lda note_a+NOTE_NOTE,X ; store prev note ; 4
sta prev_note_smc+1 ; 4
lda note_a+NOTE_TONE_SLIDING_H,X ; store prev sliding ; 4+
lda note_a+NOTE_TONE_SLIDING_H,X ; store prev sliding ; 4
sta prev_sliding_h_smc+1 ; 4
lda note_a+NOTE_TONE_SLIDING_L,X ; 4+
lda note_a+NOTE_TONE_SLIDING_L,X ; 4
sta prev_sliding_l_smc+1 ; 4
;============
; 24
note_decode_loop:
lda note_a+NOTE_LEN,X ; re-up length count ; 4+
sta note_a+NOTE_LEN_COUNT,X ; 5
lda note_a+NOTE_LEN,X ; re-up length count ; 4
sta note_a+NOTE_LEN_COUNT,X ; 4
lda note_a+NOTE_ADDR_L,X ; 4+
lda note_a+NOTE_ADDR_L,X ; 4
sta PATTERN_L ; 3
lda note_a+NOTE_ADDR_H,X ; 4+
lda note_a+NOTE_ADDR_H,X ; 4
sta PATTERN_H ; 3
;===>
; get next value
lda (PATTERN_L),Y ; 5+
lda (PATTERN_L),Y ; 5
sta note_command_smc+1 ; save termporarily ; 4
and #$0f ; 2
sta note_command_bottom_smc+1 ; 4
@ -882,22 +914,39 @@ note_decode_loop:
note_command_smc:
lda #$d1 ; 2
; FIXME: use a jump table??
; further reflection, that would require 32-bytes of addresses
; in addition to needing X or Y to index the jump table. hmmm
; Set up jump table that runs same speed on 6502 and 65c02
sty PT3_TEMP ; 3
and #$f0 ; 2
lsr ; 2
lsr ; 2
lsr ; 2
; cmp #$00
bne decode_case_1X ; 2/3
tay ; 2
lda decode_jump_table+1,y ; 4
pha ; 3
lda decode_jump_table,y ; 4
pha ; 3
ldy PT3_TEMP ; 3
rts ; 6
;=============
; 14
; 23
decode_jump_table:
.word decode_case_0X,decode_case_1X,decode_case_2X,decode_case_3X
.word decode_case_4X,decode_case_5X,decode_case_6X,decode_case_7X
.word decode_case_8X,decode_case_9X,decode_case_AX,decode_case_BX
.word decode_case_CX,decode_case_DX,decode_case_EX,decode_case_FX
decode_case_0X:
;==============================
; $0X set special effect
;==============================
; -1
note_command_bottom_smc:
lda #$d1 ; 2
@ -915,23 +964,18 @@ note_command_bottom_smc:
; 00 case
; means end of pattern
; -1
sta note_a+NOTE_LEN_COUNT,X ; len_count=0; ; 5
sta note_a+NOTE_LEN_COUNT,X ; len_count=0; ; 4
dec pt3_pattern_done_smc+1 ; 6
jmp note_done_decoding ; 3
decode_case_1X:
;==============================
; $1X -- Set Envelope Type
;==============================
cmp #$10 ; 2
bne decode_case_2X ; 2/3
;============
; 5
; -1
lda note_command_bottom_smc+1 ; 4
bne decode_case_not_10 ; 3
@ -964,9 +1008,6 @@ decode_case_3X:
; $2X/$3X set noise period
;==============================
cmp #$40 ; 2
bcs decode_case_4X ; branch greater/equal ; 3
; -1
lda note_command_smc+1 ; 4
adc #$e0 ; same as subtract $20 ; 2
sta pt3_noise_period_smc+1 ; 3
@ -979,9 +1020,7 @@ decode_case_4X:
;==============================
; $4X -- set ornament
;==============================
; cmp #$40 ; already set ;
bne decode_case_5X ; 3
; -1
lda note_command_bottom_smc+1; set ornament to bottom nibble; 4
jsr load_ornament ; 6+93
@ -990,13 +1029,16 @@ decode_case_4X:
; 110
decode_case_5X:
decode_case_6X:
decode_case_7X:
decode_case_8X:
decode_case_9X:
decode_case_AX:
;==============================
; $5X-$AX set note
;==============================
cmp #$B0 ; 2
bcs decode_case_bX ; branch greater/equal ; 3
; -1
lda note_command_smc+1 ; 4
adc #$b0 ; 2
sta note_a+NOTE_NOTE,X ; note=(current_val-0x50); ; 5
@ -1009,13 +1051,11 @@ decode_case_5X:
bne note_done_decoding ; 3
decode_case_bX:
decode_case_BX:
;============================================
; $BX -- note length or envelope manipulation
;============================================
; cmp #$b0 ; already set from before
bne decode_case_cX ; 3
; -1
lda note_command_bottom_smc+1 ; 4
beq decode_case_b0 ; 3
; -1
@ -1046,13 +1086,11 @@ decode_case_bx_higher:
bcs done_decode_loop ; branch always ; 3
decode_case_cX:
decode_case_CX:
;==============================
; $CX -- set volume
;==============================
cmp #$c0 ; check top nibble $C ; 2
bne decode_case_dX ; 3
; -1
lda note_command_bottom_smc+1 ; 4
bne decode_case_cx_not_c0 ; 3
; -1
@ -1069,17 +1107,14 @@ decode_case_cx_not_c0:
sta note_a+NOTE_VOLUME,X ; volume=current_val&0xf; 5
bne done_decode_loop ; branch always ; 3
decode_case_dX:
decode_case_DX:
decode_case_EX:
;==============================
; $DX/$EX -- change sample
;==============================
; D0 = special case (end note)
; D1-EF = set sample to (value - $D0)
cmp #$f0 ; check top nibble $D/$E ; 2
beq decode_case_fX ; 3
; -1
lda note_command_smc+1 ; 4
sec ; 2
sbc #$d0 ; 2
@ -1101,7 +1136,7 @@ decode_case_not_d0:
;==============================
; $FX - change ornament/sample
;==============================
decode_case_fX:
decode_case_FX:
; disable envelope
lda #0 ; 2
sta note_a+NOTE_ENVELOPE_ENABLED,X ; 5
@ -1553,7 +1588,7 @@ not_done:
;==========================
; pattern done early!
.if 0
early_end:
; A is pattern_done which is zero at this point
inc current_pattern_smc+1 ; increment pattern ; 6
@ -1576,7 +1611,7 @@ set_pattern:
beq pt3_new_line ; 2/3
rts ; 6
.endif
;==========================================
; real entry point
@ -1586,16 +1621,16 @@ pt3_make_frame:
; allow fallthrough where possible
current_line_smc:
lda #$d1 ; 2
.if 0
beq check_subframe ; 2/3
pattern_good:
; see if we need a new line
.endif
current_subframe_smc:
lda #$d1 ; 2
.if 0
bne line_good ; 2/3
pt3_new_line:
@ -1603,10 +1638,10 @@ pt3_new_line:
jsr pt3_decode_line ; 6+?
; check if pattern done early
.endif
pt3_pattern_done_smc:
lda #$d1 ; 2
.if 0
beq early_end ; 2/3
@ -1617,11 +1652,11 @@ line_good:
inc current_subframe_smc+1 ; subframe++ ; 6
lda current_subframe_smc+1 ; 4
.endif
; if we hit pt3_speed, move to next
pt3_speed_smc:
eor #$d1 ; 2
.if 0
bne do_frame ; 2/3
next_line:
@ -1639,7 +1674,7 @@ next_pattern:
inc current_pattern_smc+1 ; increment pattern ; 6
.endif