; Mockingboad programming:
; + Has two 6522 I/O chips connected to two AY-3-8910 chips
; + Optionally has some speech chips controlled via the outport on the AY
; + Often in slot 4
;	TODO: how to auto-detect?
; References used:
;	http://macgui.com/usenet/?group=2&id=8366
;	6522 Data Sheet
;	AY-3-8910 Data Sheet

;========================
; Mockingboard card
; Essentially two 6522s hooked to the Apple II bus
; Connected to AY-3-8910 chips
;	PA0-PA7 on 6522 connected to DA0-DA7 on AY
;	PB0     on 6522 connected to BC1
;	PB1	on 6522 connected to BDIR
;	PB2	on 6522 connected to RESET


; left speaker
MOCK_6522_ORB1	=	$C400	; 6522 #1 port b data
MOCK_6522_ORA1	=	$C401	; 6522 #1 port a data
MOCK_6522_DDRB1	=	$C402	; 6522 #1 data direction port B
MOCK_6522_DDRA1	=	$C403	; 6522 #1 data direction port A
MOCK_6522_T1CL	=	$C404	; 6522 #1 t1 low order latches
MOCK_6522_T1CH	=	$C405	; 6522 #1 t1 high order counter
MOCK_6522_T1LL	=	$C406	; 6522 #1 t1 low order latches
MOCK_6522_T1LH	=	$C407	; 6522 #1 t1 high order latches
MOCK_6522_T2CL	=	$C408	; 6522 #1 t2 low order latches
MOCK_6522_T2CH	=	$C409	; 6522 #1 t2 high order counters
MOCK_6522_SR	=	$C40A	; 6522 #1 shift register
MOCK_6522_ACR	=	$C40B	; 6522 #1 auxilliary control register
MOCK_6522_PCR	=	$C40C	; 6522 #1 peripheral control register
MOCK_6522_IFR	=	$C40D	; 6522 #1 interrupt flag register
MOCK_6522_IER	=	$C40E	; 6522 #1 interrupt enable register
MOCK_6522_ORANH	=	$C40F	; 6522 #1 port a data no handshake


; right speaker
MOCK_6522_ORB2	=	$C480	; 6522 #2 port b data
MOCK_6522_ORA2	=	$C481	; 6522 #2 port a data
MOCK_6522_DDRB2	=	$C482	; 6522 #2 data direction port B
MOCK_6522_DDRA2	=	$C483	; 6522 #2 data direction port A

; AY-3-8910 commands on port B
;						RESET	BDIR	BC1
MOCK_AY_RESET		=	$0	;	0	0	0
MOCK_AY_INACTIVE	=	$4	;	1	0	0
MOCK_AY_READ		=	$5	;	1	0	1
MOCK_AY_WRITE		=	$6	;	1	1	0
MOCK_AY_LATCH_ADDR	=	$7	;	1	1	1