dos33fsprogs/graphics/gr/bubble_universe/bubble_tiny.s
2024-05-01 17:17:22 -04:00

433 lines
7.0 KiB
ArmAsm

; bubble universe tiny -- Apple II Lores
; by Vince `deater` Weaver
; this version based on fast c64 code by serato_fig
; as posted to the sizecoding discord
; based on his TIC-80 variant
; originally was working off the BASIC code posted on the pouet forum
; original effect by yuruyrau on twitter
; 578 bytes = original color
; 531 bytes = remove keyboard code
; 527 bytes = inline sine gen
; 523 bytes = optimize init a bit
; 301 bytes = generate color lookup table
; 297 bytes = optimize color lookup table
; 282 bytes = optimize color shift
; 266 bytes = reduce resolution of sine table x2
; 260 bytes = shave off some bytes with unneeded compares
; soft-switches
KEYPRESS = $C000
KEYRESET = $C010
SET_GR = $C050
SET_TEXT = $C051
FULLGR = $C052
TEXTGR = $C053
PAGE1 = $C054
PAGE2 = $C055
; ROM routines
;BKGND0 = $F3F4 ; clear current page to A
;HGR2 = $F3D8 ; set hires page2 and clear $4000-$5fff
;HGR = $F3E2 ; set hires page1 and clear $2000-$3fff
;HPLOT0 = $F457 ; plot at (Y,X), (A)
;HCOLOR1 = $F6F0 ; set HGR_COLOR to value in X
;COLORTBL = $F6F6
;WAIT = $FCA8 ; delay 1/2(26+27A+5A^2) us
PLOT = $F800 ;; PLOT AT Y,A
PLOT1 = $F80E ;; PLOT at (GBASL),Y (need MASK to be $0f or $f0)
HLINE = $F819 ;; HLINE Y,$2C at A
VLINE = $F828 ;; VLINE A,$2D at Y
CLRSCR = $F832 ;; Clear low-res screen
CLRTOP = $F836 ;; clear only top of low-res screen
GBASCALC= $F847 ;; take Y-coord/2 in A, put address in GBASL/H ( a trashed, C clear)
SETCOL = $F864 ;; COLOR=A
ROM_TEXT2COPY = $F962 ;; iigs
SETTXT = $FB36
SETGR = $FB40
; zero page
GBASL = $26
GBASH = $27
MASK = $2E
COLOR = $30
HPLOTYL = $92
I = $D0
J = $D1
T = $D7
U = $D8
V = $D9
HGR_PAGE = $E6
INL = $FC
INH = $FD
OUTL = $FE
OUTH = $FF
SINES_BASE = $C0
sines = $6c00
sines2 = $6d00
; must be aligned :(
cosines = $6e00
cosines2= $6f00
color_map = $1000
bubble_gr:
;=======================
; init graphics
;=======================
jsr SETGR
; can't rely on registers after this as different on IIe
; with 80 col card
bit FULLGR
;========================
; setup lookup tables
;========================
;========================
; color lookup
;========================
; 34 bytes originally
; 30 updated
ldx #0 ; x=0; ; 2
loop2:
lda #0 ; a=0; ; 2
loop1:
ldy #0 ; 2
yloop:
clc ; 1
sta color_map,X ; values[y]=a; ; 3
beq skip ; 2
adc #$10 ; a+=16 ; 2
skip:
inx ; 1
iny ; 1
cpy #16 ; 2
bne yloop ; 2
; sec
adc #$10 ; carry set here ; 2
cpx #16 ; 2
beq loop2 ; 2
cpx #0 ; 2
bne loop1 ; 2
; X=0 here
;==========================
; make sine/cosine tables
;==========================
; floor(s*sin((x-96)*PI*2/256.0)+48.5);
;===================================
;
;
; final_sine[i]=quarter_sine[i]; // 0..64
; final_sine[128-i]=quarter_sine[i]; // 64..128
; final_sine[128+i]=0x60-quarter_sine[i]; // 128..192
; final_sine[256-i]=0x60-quarter_sine[i]; // 192..256
setup_sine_table:
.if 0
; spread sine table
ldy #32
; ldx #0 ; set previously
spread_loop:
tya
lsr
tax
lda sines_base,Y
sta SINES_BASE,X ; double the output
; inx
; sta SINES_BASE,X
; inx
dey
bne spread_loop
.endif
; spread sine table
; load from sines_base,Y/2
; store to SINES_BASE,Y
; ldy #32
; ldx #0 ; set previously
spread_loop:
txa
lsr
tay
lda sines_base,Y
sta SINES_BASE,X ; double the output
; inx
; sta SINES_BASE,X
; inx
; dey
inx
cpx #64
bne spread_loop
; ldx #64
ldy #64
setup_sine_loop:
lda SINES_BASE,X
sta sines,X
sta sines2,X
sta sines,Y
sta sines2,Y
lda #$60
sec
sbc SINES_BASE,X
sta sines+128,X
sta sines2+128,X
sta sines+128,Y
sta sines2+128,Y
iny
dex
bpl setup_sine_loop
; X is $FF here?
inx
; ldx #0
cosine_loop:
lda sines+192,X
sta cosines,X
sta cosines2,X
inx
bne cosine_loop
; X is 0 here?
;=======================
; init variables
;=======================
;
; lda #0
stx U
stx V
stx T
stx INL
dex ; Y=$FF (color white)
stx COLOR
;=========================
;=========================
; main loop
;=========================
;=========================
next_frame:
; reset I*T
lda T
sta it1_smc+1
sta it2_smc+1
; reset I*S
lda #0
sta is1_smc+1
sta is2_smc+1
num1_smc:
lda #13 ; 13
sta I
i_loop:
num2_smc:
lda #$18 ; 24
sta J
j_loop:
ldx U
ldy V
; where S=41 (approximately 1/6.28)
clc ; 2
; calc: b=i+t+u;
; u=cosines[a]+cosines[b];
is2_smc:
lda cosines,Y ; 4+
it2_smc:
adc cosines,X ; 4+
sta V
; calc: a=i*s+v;
; u=sines[a]+sines[b];
is1_smc:
lda sines,Y ; 4+
it1_smc:
adc sines,X ; 4+
sta U ; 3
;===========================================================
; original code is centered at 96,96 (on hypothetical 192x192 screen)
; we adjust to be 40x48 window centered at 48,48
; PLOT U-48,V-48
; U already in A
; sec
sbc #48
tay ; 2
; bmi no_plot
cpy #40
bcs no_plot
; calculate Ypos
lda V
; sec
sbc #48
; bmi no_plot
cmp #48
bcs no_plot
;PLOT = $F800 ;; PLOT AT Y,A
jsr PLOT
no_plot:
dec J
bne j_loop
done_j:
lda is1_smc+1
clc
adc #41 ; 1/6.28 = 0.16 = 0 0 1 0 1 0 0 0 = 0x28
sta is1_smc+1
sta is2_smc+1
dec I
bne i_loop
done_i:
; sty V
inc T
end:
;=================
; cycle colors
ldy #$0
lda #4
sta INH
cycle_color_loop:
lda (INL),Y
tax
lda color_map,X
sta (INL),Y
iny
bne cycle_color_loop
; need to do this for pages 4-7
inc INH
lda INH
cmp #$8
bne cycle_color_loop
beq next_frame ; just out of range...
; original
.if 0
sines_base:
.byte $30,$31,$32,$33,$34,$35,$36,$37,$38,$39,$3A,$3B,$3C,$3D,$3E,$3F
.byte $40,$41,$42,$42,$43,$44,$45,$46,$47,$48,$48,$49,$4A,$4B,$4C,$4C
.byte $4D,$4E,$4E,$4F,$50,$50,$51,$52,$52,$53,$53,$54,$54,$55,$55,$55
.byte $56,$56,$57,$57,$57,$58,$58,$58,$58,$58,$59,$59,$59,$59,$59,$59
.byte $59
.endif
; half as many points
sines_base:
.byte $30,$32,$34,$36,$38,$3A,$3C,$3E
.byte $40,$42,$43,$45,$47,$48,$4A,$4C
.byte $4D,$4E,$50,$51,$52,$53,$54,$55
.byte $56,$57,$57,$58,$58,$59,$59,$59
.byte $59
.if 0
sines_base_reverse:
.byte $59
.byte $59,$59,$59,$58, $58,$57,$57,$56
.byte $55,$54,$53,$52, $51,$50,$4E,$4D
.byte $4C,$4A,$48,$47, $45,$43,$42,$40
.byte $3E,$3C,$3A,$38, $36,$34,$32,$30
.endif
.if 0
; 26 - x^2/64+2x
sines_base:
.byte $2F,$30,$31,$33,$34,$35,$36,$38,$39,$3A,$3B,$3C,$3D,$3E,$3F,$40
.byte $41,$42,$43,$44,$45,$46,$47,$48,$49,$4A,$4A,$4B,$4C,$4D,$4D,$4E
.byte $4F,$4F,$50,$51,$51,$52,$52,$53,$53,$54,$54,$55,$55,$56,$56,$56
.byte $57,$57,$57,$58,$58,$58,$58,$59,$59,$59,$59,$59,$59,$59,$59,$59
.byte $59
.endif
.if 0
sines_base:
.byte $1A,$1C,$1E,$20,$22,$24,$26,$28,$29,$2B,$2D,$2F,$30,$32,$33,$35
.byte $36,$38,$39,$3B,$3C,$3E,$3F,$40,$41,$43,$44,$45,$46,$47,$48,$49
.byte $4A,$4B,$4C,$4D,$4E,$4F,$50,$51,$51,$52,$53,$54,$54,$55,$55,$56
.byte $56,$57,$57,$58,$58,$59,$59,$59,$59,$5A,$5A,$5A,$5A,$5A,$5A,$5A
.byte $5A
.endif
; floor(s*cos((x-96)*PI*2/256.0)+48.5);