dos33fsprogs/music/chiptune_debug/chiptune_smallest.s
Vince Weaver b1238af49d re-arranged the entire directory structure
this will probably upset people
2021-01-05 15:29:31 -05:00

224 lines
5.1 KiB
ArmAsm

; VMW Minimal Mockingboard Issue Reproducer
; ZP addresses
MB_CHUNK_OFFSET = $94
MB_VALUE = $91
WAIT = $FCA8 ; 1/2(26+27A+5A^2) us
; 85 = 19.223ms
; 86 = 19.6ms
; 87 = 20.11ms
; 120 = 37.6ms
; 240 = 147.25ms
; left channel
MOCK_6522_1_ORB = $C400 ; 6522 #1 port b data
MOCK_6522_1_ORA = $C401 ; 6522 #1 port a data
MOCK_6522_1_DDRB = $C402 ; 6522 #1 data direction port B
MOCK_6522_1_DDRA = $C403 ; 6522 #1 data direction port A
MOCK_6522_1_T1C_L = $C404 ; 6522 #1 Low-order counter
MOCK_6522_1_T1C_H = $C405 ; 6522 #1 High-order counter
MOCK_6522_1_T1L_L = $C406 ; 6522 #1 Low-order latch
MOCK_6522_1_T1L_H = $C407 ; 6522 #1 High-order latch
MOCK_6522_1_T2C_L = $C408 ; 6522 #1 Timer2 Low-order Latch/Counter
MOCK_6522_1_T2C_H = $C409 ; 6522 #1 Timer2 High-order Latch/Counter
MOCK_6522_1_SR = $C40A ; 6522 #1 Shift Register
MOCK_6522_1_ACR = $C40B ; 6522 #1 Auxiliary Control Register
MOCK_6522_1_PCR = $C40C ; 6522 #1 Peripheral Control Register
MOCK_6522_1_IFR = $C40D ; 6522 #1 Interrupt Flag Register
MOCK_6522_1_IER = $C40E ; 6522 #1 Interrupt Enable Register
MOCK_6522_1_ORAN = $C40F ; 6522 #1 port a data, no handshake
; right channel
MOCK_6522_2_ORB = $C480 ; 6522 #2 port b data
MOCK_6522_2_ORA = $C481 ; 6522 #2 port a data
MOCK_6522_2_DDRB = $C482 ; 6522 #2 data direction port B
MOCK_6522_2_DDRA = $C483 ; 6522 #2 data direction port A
MOCK_6522_2_T1C_L = $C484 ; 6522 #2 Low-order counter
MOCK_6522_2_T1C_H = $C485 ; 6522 #2 High-order counter
MOCK_6522_2_T1L_L = $C486 ; 6522 #2 Low-order latch
MOCK_6522_2_T1L_H = $C487 ; 6522 #2 High-order latch
MOCK_6522_2_T2C_L = $C488 ; 6522 #2 Timer2 Low-order Latch/Counter
MOCK_6522_2_T2C_H = $C489 ; 6522 #2 Timer2 High-order Latch/Counter
MOCK_6522_2_SR = $C48A ; 6522 #2 Shift Register
MOCK_6522_2_ACR = $C48B ; 6522 #2 Auxiliary Control Register
MOCK_6522_2_PCR = $C48C ; 6522 #2 Peripheral Control Register
MOCK_6522_2_IFR = $C48D ; 6522 #2 Interrupt Flag Register
MOCK_6522_2_IER = $C48E ; 6522 #2 Interrupt Enable Register
MOCK_6522_2_ORAN = $C48F ; 6522 #2 port a data, no handshake
; AY-3-8910 commands on port B
; RESET BDIR BC1
MOCK_AY_RESET = $0 ; 0 0 0
MOCK_AY_INACTIVE = $4 ; 1 0 0
MOCK_AY_READ = $5 ; 1 0 1
MOCK_AY_WRITE = $6 ; 1 1 0
MOCK_AY_LATCH_ADDR = $7 ; 1 1 1
;=========================
; Init Variables
;=========================
lda #$0
sta MB_CHUNK_OFFSET
;============================
; Init the Mockingboard
;============================
;========================
; Mockingboard Init
;========================
; Initialize the 6522s
; set the data direction for all pins of PortA/PortB to be output
mockingboard_init:
lda #$ff ; all 8 pins output (1), portA
sta MOCK_6522_1_DDRA
sta MOCK_6522_2_DDRA
; only 3 pins output (1), port B
lda #$7
sta MOCK_6522_1_DDRB
sta MOCK_6522_2_DDRB
reset_ay_both:
;======================
; Reset Left AY-3-8910
;======================
reset_ay_left:
lda #MOCK_AY_RESET
sta MOCK_6522_1_ORB
lda #MOCK_AY_INACTIVE
sta MOCK_6522_1_ORB
; AY-3-8913: Wait 5 us
nop
nop
nop
nop
nop
;======================
; Reset Right AY-3-8910
;======================
reset_ay_right:
lda #MOCK_AY_RESET
sta MOCK_6522_2_ORB
lda #MOCK_AY_INACTIVE
sta MOCK_6522_2_ORB
; AY-3-8913: Wait 5 us
nop
nop
nop
nop
nop
;=========================
; Setup initial conditions
;=========================
; 5: C CHANNEL COARSE
ldx #5
lda #$0 ; always 0
sta MB_VALUE
jsr write_ay_address_right
; 7: ENABLE
ldx #7
lda #$38 ; noise disabled, ABC enabled
sta MB_VALUE
jsr write_ay_address_right
; 10: C Amplitude
ldx #10
lda #$c ; always volume 12
sta MB_VALUE
jsr write_ay_address_right
; 4: C CHANNEL FINE
ldx #4
lda #$51
sta MB_VALUE
jsr write_ay_address_right
main_loop:
lda #$51
sta MB_VALUE
jsr write_ay_value_right
; delay ~20ms
lda #87
jsr WAIT ; wait 20ms or so
lda #$3C
sta MB_VALUE
jsr write_ay_value_right
; delay ~20ms
lda #87
jsr WAIT ; wait 20ms or so
jmp main_loop
;=========================================
; Write Right/Left to save value AY-3-8910
;=========================================
; register in X
; value in MB_VALUE
; Write sequence
; ADDRESS: Inactive -> Latch Address -> Addr -> Inactive
; Programming manual (as well as timing diagrams)
; say you can flip latch / addr order, but the simulators
; don't like that.
; Value: Inactive -> Data -> Write Data -> Inactive
;
write_ay_address_right:
; address
stx MOCK_6522_2_ORA ; put address on PA1 ; 3
lda #MOCK_AY_LATCH_ADDR ; latch_address on PB1 ; 2
sta MOCK_6522_2_ORB ; latch_address on PB1 ; 3
; on AY-3-8913 hold 300ns, on AY-3-8910 hold 400ns
lda #MOCK_AY_INACTIVE ; go inactive ; 2
sta MOCK_6522_2_ORB ; 3
; on AY-3-8913 hold 50ns, on AY-3-8910 hold 100ns
write_ay_value_right:
lda MB_VALUE ; 3
sta MOCK_6522_2_ORA ; put value on PA2 ; 4
; AY-3-8913 + AY-3-8910: 50ns
; presumably the next two instructions take 6*1us so plenty of time
lda #MOCK_AY_WRITE ; ; 2
sta MOCK_6522_2_ORB ; write on PB2 ; 4
; AY-3-8913 hold 1800ns, AY-3-8910 500ns
lda #MOCK_AY_INACTIVE ; go inactive ; 2
sta MOCK_6522_2_ORB ; 4
; AY-3-8913 + AY-3-8910: 100ns
rts ; 6