emailler/client/ip65/cs8900a.s

288 lines
4.7 KiB
ArmAsm
Raw Normal View History

; Ethernet driver for CS8900A chip (as used in RR-NET and Uthernet adapters)
;
; Based on Doc Bacardi's tftp source
.ifndef NB65_API_VERSION_NUMBER
.define EQU =
.include "../inc/nb65_constants.i"
.endif
.include "../inc/common.i"
.include "cs8900a.i"
.export eth_init
.export eth_rx
.export eth_tx
.export eth_inp
.export eth_inp_len
.export eth_outp
.export eth_outp_len
.exportzp eth_dest
.exportzp eth_src
.exportzp eth_type
.exportzp eth_data
.import cs_init
.import cs_packet_page
.import cs_packet_data
.import cs_rxtx_data
.import cs_tx_cmd
.import cs_tx_len
.import cfg_mac
.import ip65_error
.macro write_page page, value
lda #page/2
ldx #<value
ldy #>value
jsr cs_write_page
.endmacro
.segment "IP65ZP" : zeropage
eth_packet: .res 2
.bss
; input and output buffers
eth_inp_len: .res 2 ; input packet length
eth_inp: .res 1518 ; space for input packet
eth_outp_len: .res 2 ; output packet length
eth_outp: .res 1518 ; space for output packet
; ethernet packet offsets
eth_dest = 0 ; offset of destination mac address in an ethernet packet
eth_src = 6 ; offset of source address in an ethernet packet
eth_type = 12 ; offset of packet type in an ethernet packet
eth_data = 14 ; offset of packet data in an ethernet packet
.code
;initialize the ethernet adaptor
;inputs: none
;outputs: carry flag is set if there was an error, clear otherwise
eth_init:
jsr cs_init
lda #0 ; check magic signature
jsr cs_read_page
cpx #$0e
bne @notfound
cpy #$63
bne @notfound
lda #1
jsr cs_read_page
cpx #0
bne @notfound
; y contains chip rev
write_page pp_self_ctl, $0055 ; $0114, reset chip
write_page pp_rx_ctl, $0d05 ; $0104, accept individual and broadcast packets
lda #pp_ia/2 ; $0158, write mac address
ldx cfg_mac
ldy cfg_mac + 1
jsr cs_write_page
lda #pp_ia/2 + 1
ldx cfg_mac + 2
ldy cfg_mac + 3
jsr cs_write_page
lda #pp_ia/2 + 2
ldx cfg_mac + 4
ldy cfg_mac + 5
jsr cs_write_page
write_page pp_line_ctl, $00d3 ; $0112, enable rx and tx
clc
rts
@notfound:
sec
rts
;receive a packet
;inputs: none
;outputs:
; if there was an error receiving the packet (or no packet was ready) then carry flag is set
; if packet was received correctly then carry flag is clear,
; eth_inp contains the received packet,
; and eth_inp_len contains the length of the packet
eth_rx:
lda #$24 ; check rx status
sta cs_packet_page
lda #$01
sta cs_packet_page + 1
lda cs_packet_data + 1
and #$0d
bne :+
sec ; no packet ready
rts
: lda cs_rxtx_data + 1 ; ignore status
lda cs_rxtx_data
lda cs_rxtx_data + 1 ; read packet length
sta eth_inp_len + 1
tax ; save
lda cs_rxtx_data
sta eth_inp_len
lda #<eth_inp ; set packet pointer
sta eth_packet
lda #>eth_inp
sta eth_packet + 1
ldy #0
cpx #0 ; < 256 bytes left?
beq @tail
@get256:
lda cs_rxtx_data
sta (eth_packet),y
iny
lda cs_rxtx_data + 1
sta (eth_packet),y
iny
bne @get256
inc eth_packet + 1
dex
bne @get256
@tail:
lda eth_inp_len ; bytes left / 2, round up
lsr
adc #0
beq @done
tax
@get:
lda cs_rxtx_data
sta (eth_packet),y
iny
lda cs_rxtx_data + 1
sta (eth_packet),y
iny
dex
bne @get
@done:
clc
rts
; send a packet
;inputs:
; eth_outp: packet to send
; eth_outp_len: length of packet to send
;outputs:
; if there was an error sending the packet then carry flag is set
; otherwise carry flag is cleared
eth_tx:
lda #$c9 ; ask for buffer space
sta cs_tx_cmd
lda #0
sta cs_tx_cmd + 1
lda eth_outp_len ; set length
sta cs_tx_len
lda eth_outp_len + 1
sta cs_tx_len + 1
cmp #6
bmi :+
lda #NB65_ERROR_INPUT_TOO_LARGE
sta ip65_error
sec ; oversized packet
rts
: lda #<pp_bus_status ; select bus status register
sta cs_packet_page
lda #>pp_bus_status
sta cs_packet_page + 1
@waitspace:
lda cs_packet_data + 1 ; wait for space
ldx cs_packet_data
lsr
bcs @gotspace
jsr @done ; polling too fast doesn't work, delay added by David Schmidt
jmp @waitspace
@gotspace:
ldax #eth_outp ; send packet
stax eth_packet
ldy #0
ldx eth_outp_len + 1
beq @tail
@send256:
lda (eth_packet),y
sta cs_rxtx_data
iny
lda (eth_packet),y
sta cs_rxtx_data + 1
iny
bne @send256
inc eth_packet + 1
dex
bne @send256
@tail:
ldx eth_outp_len
beq @done
@send:
lda (eth_packet),y
sta cs_rxtx_data
dex
beq @done
iny
lda (eth_packet),y
sta cs_rxtx_data + 1
iny
dex
bne @send
@done: ; also used by timeout code above
clc
rts
; read X/Y from page A * 2
cs_read_page:
asl
sta cs_packet_page
lda #0
rol
sta cs_packet_page + 1
ldx cs_packet_data
ldy cs_packet_data + 1
rts
; write X/Y to page A * 2
cs_write_page:
asl
sta cs_packet_page
lda #0
rol
sta cs_packet_page + 1
stx cs_packet_data
sty cs_packet_data + 1
rts