Apple-2-SW/emailler
1
0
Fork 0
mirror of https://github.com/bobbimanners/emailler.git synced 2024-11-18 21:07:03 +00:00
Code Issues Projects Releases Wiki Activity
fc0da98f73
emailler/test/Makefile

203 lines
5.5 KiB
Makefile
Raw Normal View History

Allow all test programs to run on the VIC20: - Added exit_to_basic symbol. - Aligned linker config with C64 linker config. - Made switch to lower charset compatible. Allow all test programs to run with LANceGS card. Aligned C64 input file name.
2013-12-29 22:39:35 +00:00
# Build for Cirrus Logic CS8900A based devices:
Introduced IP65 "combo" libraries. Up to now every IP65 library contained exactly one Ethernet driver. In scenarios without strict memory limitations I might however be benefitial to have an IP65 library containing all Ethernet drivers available for a given target. The Ethernet hardware detection that was already present before is used in this scenario to try to initialize one Ethernet driver after the other until one succeeds. If all drivers fail to initialize the user gets informed as usual. The WIZ811MJ driver was primarily introduced for orthogonality reasons. There are however at least two W5100-based prototypes for the C64 so it makes at least some sense. The name was chosen as sort of placeholder for "something containing a W5100 chip".
2015-07-07 17:43:32 +00:00
# make eth=cl
Allow all test programs to run on the VIC20: - Added exit_to_basic symbol. - Aligned linker config with C64 linker config. - Made switch to lower charset compatible. Allow all test programs to run with LANceGS card. Aligned C64 input file name.
2013-12-29 22:39:35 +00:00
# Build for Standard Microsystems LAN91C96 based devices:
# make eth=sm
# Build for WIZnet W5100 based devices:
# make eth=wn
Introduced IP65 "combo" libraries. Up to now every IP65 library contained exactly one Ethernet driver. In scenarios without strict memory limitations I might however be benefitial to have an IP65 library containing all Ethernet drivers available for a given target. The Ethernet hardware detection that was already present before is used in this scenario to try to initialize one Ethernet driver after the other until one succeeds. If all drivers fail to initialize the user gets informed as usual. The WIZ811MJ driver was primarily introduced for orthogonality reasons. There are however at least two W5100-based prototypes for the C64 so it makes at least some sense. The name was chosen as sort of placeholder for "something containing a W5100 chip".
2015-07-07 17:43:32 +00:00
ifeq ($(eth),cl)
C64DRIVERLIB = ../drivers/c64rrnet.lib
A2DRIVERLIB = ../drivers/a2uther.lib
Removed support for W5100 on the C64. Now that we have per-target combo driver wrappers we can remove the W5100 support from the C64. There isn't any actual (known) W5100-based solution for the C64.
2019-04-29 14:41:27 +00:00
ATRDRIVERLIB = ../drivers/atrdragon.lib
VICDRIVERLIB = ../drivers/vic20rrnet.lib
Introduced IP65 "combo" libraries. Up to now every IP65 library contained exactly one Ethernet driver. In scenarios without strict memory limitations I might however be benefitial to have an IP65 library containing all Ethernet drivers available for a given target. The Ethernet hardware detection that was already present before is used in this scenario to try to initialize one Ethernet driver after the other until one succeeds. If all drivers fail to initialize the user gets informed as usual. The WIZ811MJ driver was primarily introduced for orthogonality reasons. There are however at least two W5100-based prototypes for the C64 so it makes at least some sense. The name was chosen as sort of placeholder for "something containing a W5100 chip".
2015-07-07 17:43:32 +00:00
else ifeq ($(eth),sm)
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
C64DRIVERLIB = ../drivers/c64eth64.lib
Allow all test programs to run on the VIC20: - Added exit_to_basic symbol. - Aligned linker config with C64 linker config. - Made switch to lower charset compatible. Allow all test programs to run with LANceGS card. Aligned C64 input file name.
2013-12-29 22:39:35 +00:00
A2DRIVERLIB = ../drivers/a2lancegs.lib
else ifeq ($(eth),wn)
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
A2DRIVERLIB = ../drivers/a2uther2.lib
Added support for the upcoming 'Dracarys' ATARI PBI device. See https://atariage.com/forums/topic/287376-preannouncement-dragon-cart-ii/
2019-05-08 15:23:00 +00:00
ATRDRIVERLIB = ../drivers/atrdracarys.lib
Allow all test programs to run on the VIC20: - Added exit_to_basic symbol. - Aligned linker config with C64 linker config. - Made switch to lower charset compatible. Allow all test programs to run with LANceGS card. Aligned C64 input file name.
2013-12-29 22:39:35 +00:00
else
Introduced IP65 "combo" libraries. Up to now every IP65 library contained exactly one Ethernet driver. In scenarios without strict memory limitations I might however be benefitial to have an IP65 library containing all Ethernet drivers available for a given target. The Ethernet hardware detection that was already present before is used in this scenario to try to initialize one Ethernet driver after the other until one succeeds. If all drivers fail to initialize the user gets informed as usual. The WIZ811MJ driver was primarily introduced for orthogonality reasons. There are however at least two W5100-based prototypes for the C64 so it makes at least some sense. The name was chosen as sort of placeholder for "something containing a W5100 chip".
2015-07-07 17:43:32 +00:00
C64DRIVERLIB = ../drivers/c64combo.lib
A2DRIVERLIB = ../drivers/a2combo.lib
Added support for the upcoming 'Dracarys' ATARI PBI device. See https://atariage.com/forums/topic/287376-preannouncement-dragon-cart-ii/
2019-05-08 15:23:00 +00:00
ATRDRIVERLIB = ../drivers/atrcombo.lib
Removed support for W5100 on the C64. Now that we have per-target combo driver wrappers we can remove the W5100 support from the C64. There isn't any actual (known) W5100-based solution for the C64.
2019-04-29 14:41:27 +00:00
VICDRIVERLIB = ../drivers/vic20rrnet.lib
Allow all test programs to run on the VIC20: - Added exit_to_basic symbol. - Aligned linker config with C64 linker config. - Made switch to lower charset compatible. Allow all test programs to run with LANceGS card. Aligned C64 input file name.
2013-12-29 22:39:35 +00:00
endif
Set disk tool variables to defaults. If the user fails to set the disk tool variable(s) he now doesn't get syntactically wrong commands but rather file-not-founds. Maybe he even chooses to drop tool(s) into the current directory or add the disk tool path(s) to the PATH variable...
2019-07-15 10:28:27 +00:00
# See http://vice-emu.sourceforge.net/
C1541 ?= c1541
# See https://applecommander.github.io/
AC ?= ac.jar
# See https://www.horus.com/~hias/atari/
DIR2ATR ?= dir2atr
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
UDP =\
dns \
dottedquad \
parsequerystring \
sntp \
Added VT100 test. Re-added VT100 test that was created for KIPPERTERM development. Not very usefully as-is but a good template for any offline VT100 rendering test/debugging. Additionally the disk images were renamed to distinguish them from the disk images created in the apps directory.
2017-05-18 22:17:38 +00:00
tftp \
Added timer test to Makefile.
2018-02-06 12:06:05 +00:00
timer \
Introduced C interface to IP65. The IP5 usage of ld65 segments and zeropage variables was made compatible with cc65 C programs already a while ago. This commit is the next logical step which is to introduce the actual C interface to IP65. IP65 for C programs shares the the ip65.lib / ip65_tcp.lib with IP65 for assembler programs. However the various libraries from the 'drivers' are not reused. Instead there's exactly one library for every target named ip65_<target>.lib. Those libraries contain only functions used by ip65.lib / ip65_tcp.lib. TODOs: - Introduce c64_timer.s and atr_timer.s. - Add a C interface to the rest of the IP65 functionality (especially TCP).
2017-11-05 13:28:49 +00:00
udp \
Added VT100 test. Re-added VT100 test that was created for KIPPERTERM development. Not very usefully as-is but a good template for any offline VT100 rendering test/debugging. Additionally the disk images were renamed to distinguish them from the disk images created in the apps directory.
2017-05-18 22:17:38 +00:00
vt100
Allow all test programs to run on the VIC20: - Added exit_to_basic symbol. - Aligned linker config with C64 linker config. - Made switch to lower charset compatible. Allow all test programs to run with LANceGS card. Aligned C64 input file name.
2013-12-29 22:39:35 +00:00
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
TCP =\
geturl \
httpd \
Renamed 'tcp' to 'math' as the name 'tcp' will be needed soon.
2017-11-03 23:25:09 +00:00
math \
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
parser \
Added C interface to TCP functions.
2017-11-06 22:36:44 +00:00
ping \
tcp
git-svn-id: http://svn.code.sf.net/p/netboot65/code@293 93682198-c243-4bdb-bd91-e943c89aac3b
2010-12-28 03:59:36 +00:00
Add a C interface for atarixl target. Just some Makefile tweaks were needed...
2017-11-27 22:22:47 +00:00
C_PGM := $(foreach pgm,$(UDP) $(TCP),$(basename $(wildcard $(pgm).c)))
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
all: $(UDP) $(TCP)
.PHONY: $(UDP) $(TCP)
$(addsuffix .prg,$(UDP)): IP65LIB = ../ip65/ip65.lib
$(addsuffix .prg,$(TCP)): IP65LIB = ../ip65/ip65_tcp.lib
$(addsuffix .bin,$(UDP)): IP65LIB = ../ip65/ip65.lib
$(addsuffix .bin,$(TCP)): IP65LIB = ../ip65/ip65_tcp.lib
Added support for the ATARI 8-bit with Dragon Cart. The actual ATARI-specific code is "inspired" by the IP65 variant published in http://atariage.com/forums/topic/211161-dragoncart-software/?p=2734494. The timer routines are modeled after the ones for the VIC20.
2015-08-28 13:19:52 +00:00
$(addsuffix .com,$(UDP)): IP65LIB = ../ip65/ip65.lib
$(addsuffix .com,$(TCP)): IP65LIB = ../ip65/ip65_tcp.lib
Add a C interface for atarixl target. Just some Makefile tweaks were needed...
2017-11-27 22:22:47 +00:00
$(addsuffix .xl.com,$(UDP)): IP65LIB = ../ip65/ip65.lib
$(addsuffix .xl.com,$(TCP)): IP65LIB = ../ip65/ip65_tcp.lib
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
$(addsuffix .vicprg,$(UDP)): IP65LIB = ../ip65/ip65.lib
$(addsuffix .vicprg,$(TCP)): IP65LIB = ../ip65/ip65_tcp.lib
Removed VIC20 programs from default recipe. I don't have plans to support C programs on the VIC20. So now that there are C test programs the simplest solution is to not (try to) build VIC20 test programs as part of the default recipe.
2017-11-09 21:08:57 +00:00
$(foreach pgm,$(UDP) $(TCP),$(eval $(pgm): $(pgm).prg $(pgm).bin $(pgm).com))
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
Add a C interface for atarixl target. Just some Makefile tweaks were needed...
2017-11-27 22:22:47 +00:00
$(foreach pgm,$(C_PGM),$(eval $(pgm): $(pgm).xl.com))
Moved httpd.slotscan to ip65test.dsk and dropped ip65demo.dsk. Now that with Telnet65 there is a "real" application there's no point anymore in the ip65demo.dsk. Therefore httpd.slotscan is now part of the ordinary ip65test.dsk.
2017-11-03 23:40:35 +00:00
httpd-slotscan.bin: IP65LIB = ../ip65/ip65_tcp.lib
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
prg: $(addsuffix .prg,$(UDP) $(TCP))
Moved httpd.slotscan to ip65test.dsk and dropped ip65demo.dsk. Now that with Telnet65 there is a "real" application there's no point anymore in the ip65demo.dsk. Therefore httpd.slotscan is now part of the ordinary ip65test.dsk.
2017-11-03 23:40:35 +00:00
bin: $(addsuffix .bin,$(UDP) $(TCP)) httpd-slotscan.bin
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
Added support for the ATARI 8-bit with Dragon Cart. The actual ATARI-specific code is "inspired" by the IP65 variant published in http://atariage.com/forums/topic/211161-dragoncart-software/?p=2734494. The timer routines are modeled after the ones for the VIC20.
2015-08-28 13:19:52 +00:00
com: $(addsuffix .com,$(UDP) $(TCP))
Add a C interface for atarixl target. Just some Makefile tweaks were needed...
2017-11-27 22:22:47 +00:00
xl.com: $(addsuffix .xl.com,$(C_PGM))
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
vicprg: $(addsuffix .vicprg,$(UDP) $(TCP))
git-svn-id: http://svn.code.sf.net/p/netboot65/code@293 93682198-c243-4bdb-bd91-e943c89aac3b
2010-12-28 03:59:36 +00:00
Added VT100 test. Re-added VT100 test that was created for KIPPERTERM development. Not very usefully as-is but a good template for any offline VT100 rendering test/debugging. Additionally the disk images were renamed to distinguish them from the disk images created in the apps directory.
2017-05-18 22:17:38 +00:00
d64: ip65test.d64
more refactoring to accomodate w5100 driver git-svn-id: http://svn.code.sf.net/p/netboot65/code@289 93682198-c243-4bdb-bd91-e943c89aac3b
2010-12-10 13:12:18 +00:00
Added VT100 test. Re-added VT100 test that was created for KIPPERTERM development. Not very usefully as-is but a good template for any offline VT100 rendering test/debugging. Additionally the disk images were renamed to distinguish them from the disk images created in the apps directory.
2017-05-18 22:17:38 +00:00
dsk: ip65test.dsk
more refactoring to accomodate w5100 driver git-svn-id: http://svn.code.sf.net/p/netboot65/code@289 93682198-c243-4bdb-bd91-e943c89aac3b
2010-12-10 13:12:18 +00:00
Added VT100 test. Re-added VT100 test that was created for KIPPERTERM development. Not very usefully as-is but a good template for any offline VT100 rendering test/debugging. Additionally the disk images were renamed to distinguish them from the disk images created in the apps directory.
2017-05-18 22:17:38 +00:00
atr: ip65test.atr
Added support for the ATARI 8-bit with Dragon Cart. The actual ATARI-specific code is "inspired" by the IP65 variant published in http://atariage.com/forums/topic/211161-dragoncart-software/?p=2734494. The timer routines are modeled after the ones for the VIC20.
2015-08-28 13:19:52 +00:00
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
ip65:
make -C ../ip65
Allow all test programs to run on the VIC20: - Added exit_to_basic symbol. - Aligned linker config with C64 linker config. - Made switch to lower charset compatible. Allow all test programs to run with LANceGS card. Aligned C64 input file name.
2013-12-29 22:39:35 +00:00
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
drivers:
make -C ../drivers
Allow all test programs to run on the VIC20: - Added exit_to_basic symbol. - Aligned linker config with C64 linker config. - Made switch to lower charset compatible. Allow all test programs to run with LANceGS card. Aligned C64 input file name.
2013-12-29 22:39:35 +00:00
Fix Atari linker config file in "apps" and "test" directories.
2017-10-02 06:05:39 +00:00
ATARI_CFG = atari.cfg
vt100.com: ATARI_CFG = ../apps/atrtelnet.cfg
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
%.o: %.s
ca65 $<
more refactoring to accomodate w5100 driver git-svn-id: http://svn.code.sf.net/p/netboot65/code@289 93682198-c243-4bdb-bd91-e943c89aac3b
2010-12-10 13:12:18 +00:00
Moved httpd.slotscan to ip65test.dsk and dropped ip65demo.dsk. Now that with Telnet65 there is a "real" application there's no point anymore in the ip65demo.dsk. Therefore httpd.slotscan is now part of the ordinary ip65test.dsk.
2017-11-03 23:40:35 +00:00
%-slotscan.o: %.s
ca65 -D A2_SLOT_SCAN -o $@ $<
Introduced C interface to IP65. The IP5 usage of ld65 segments and zeropage variables was made compatible with cc65 C programs already a while ago. This commit is the next logical step which is to introduce the actual C interface to IP65. IP65 for C programs shares the the ip65.lib / ip65_tcp.lib with IP65 for assembler programs. However the various libraries from the 'drivers' are not reused. Instead there's exactly one library for every target named ip65_<target>.lib. Those libraries contain only functions used by ip65.lib / ip65_tcp.lib. TODOs: - Introduce c64_timer.s and atr_timer.s. - Add a C interface to the rest of the IP65 functionality (especially TCP).
2017-11-05 13:28:49 +00:00
%.o: %.c
Removed the (defunct) include file dependencies.
2018-02-23 15:59:31 +00:00
%.prg: %.o ip65 drivers
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
ld65 -o $*.prg -C c64.cfg -m $*.c64.map -vm $< $(IP65LIB) $(C64DRIVERLIB) c64.lib
more refactoring to accomodate w5100 driver git-svn-id: http://svn.code.sf.net/p/netboot65/code@289 93682198-c243-4bdb-bd91-e943c89aac3b
2010-12-10 13:12:18 +00:00
Removed the (defunct) include file dependencies.
2018-02-23 15:59:31 +00:00
%.bin: %.o ip65 drivers
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
ld65 -o $*.bin -C apple2.cfg -m $*.a2.map -vm $< $(IP65LIB) $(A2DRIVERLIB) apple2.lib
more refactoring to accomodate w5100 driver git-svn-id: http://svn.code.sf.net/p/netboot65/code@289 93682198-c243-4bdb-bd91-e943c89aac3b
2010-12-10 13:12:18 +00:00
Removed the (defunct) include file dependencies.
2018-02-23 15:59:31 +00:00
%.com: %.o ip65 drivers
Fix Atari linker config file in "apps" and "test" directories.
2017-10-02 06:05:39 +00:00
ld65 -o $*.com -C $(ATARI_CFG) -m $*.atr.map -vm $< $(IP65LIB) $(ATRDRIVERLIB) atari.lib
Added support for the ATARI 8-bit with Dragon Cart. The actual ATARI-specific code is "inspired" by the IP65 variant published in http://atariage.com/forums/topic/211161-dragoncart-software/?p=2734494. The timer routines are modeled after the ones for the VIC20.
2015-08-28 13:19:52 +00:00
Removed the (defunct) include file dependencies.
2018-02-23 15:59:31 +00:00
%.vicprg: %.o ip65 drivers
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
ld65 -o $*.vicprg -C vic20-32k.cfg -m $*.vic.map -vm $< $(IP65LIB) $(VICDRIVERLIB) vic20.lib
commence A2 basic client git-svn-id: http://svn.code.sf.net/p/netboot65/code@330 93682198-c243-4bdb-bd91-e943c89aac3b
2013-04-10 08:37:05 +00:00
Removed the (defunct) include file dependencies.
2018-02-23 15:59:31 +00:00
%.prg: %.c ip65 drivers
Added timer test to Makefile.
2018-02-06 12:06:05 +00:00
cl65 -o $*.prg -O -t c64 -m $*.c64.map -vm $< $(wildcard $**.s) $(IP65LIB) ../drivers/ip65_c64.lib
Introduced C interface to IP65. The IP5 usage of ld65 segments and zeropage variables was made compatible with cc65 C programs already a while ago. This commit is the next logical step which is to introduce the actual C interface to IP65. IP65 for C programs shares the the ip65.lib / ip65_tcp.lib with IP65 for assembler programs. However the various libraries from the 'drivers' are not reused. Instead there's exactly one library for every target named ip65_<target>.lib. Those libraries contain only functions used by ip65.lib / ip65_tcp.lib. TODOs: - Introduce c64_timer.s and atr_timer.s. - Add a C interface to the rest of the IP65 functionality (especially TCP).
2017-11-05 13:28:49 +00:00
rm $*.o
Removed the (defunct) include file dependencies.
2018-02-23 15:59:31 +00:00
%.bin: %.c ip65 drivers
Added timer test to Makefile.
2018-02-06 12:06:05 +00:00
cl65 -o $*.bin -O -t apple2 -m $*.a2.map -vm $< $(wildcard $**.s) $(IP65LIB) ../drivers/ip65_apple2.lib
Introduced C interface to IP65. The IP5 usage of ld65 segments and zeropage variables was made compatible with cc65 C programs already a while ago. This commit is the next logical step which is to introduce the actual C interface to IP65. IP65 for C programs shares the the ip65.lib / ip65_tcp.lib with IP65 for assembler programs. However the various libraries from the 'drivers' are not reused. Instead there's exactly one library for every target named ip65_<target>.lib. Those libraries contain only functions used by ip65.lib / ip65_tcp.lib. TODOs: - Introduce c64_timer.s and atr_timer.s. - Add a C interface to the rest of the IP65 functionality (especially TCP).
2017-11-05 13:28:49 +00:00
rm $*.o
Removed the (defunct) include file dependencies.
2018-02-23 15:59:31 +00:00
%.com: %.c ip65 drivers
Added timer test to Makefile.
2018-02-06 12:06:05 +00:00
cl65 -o $*.com -O -t atari -m $*.atr.map -vm $< $(wildcard $**.s) $(IP65LIB) ../drivers/ip65_atari.lib
Introduced C interface to IP65. The IP5 usage of ld65 segments and zeropage variables was made compatible with cc65 C programs already a while ago. This commit is the next logical step which is to introduce the actual C interface to IP65. IP65 for C programs shares the the ip65.lib / ip65_tcp.lib with IP65 for assembler programs. However the various libraries from the 'drivers' are not reused. Instead there's exactly one library for every target named ip65_<target>.lib. Those libraries contain only functions used by ip65.lib / ip65_tcp.lib. TODOs: - Introduce c64_timer.s and atr_timer.s. - Add a C interface to the rest of the IP65 functionality (especially TCP).
2017-11-05 13:28:49 +00:00
rm $*.o
Removed the (defunct) include file dependencies.
2018-02-23 15:59:31 +00:00
%.xl.com: %.c ip65 drivers
Added timer test to Makefile.
2018-02-06 12:06:05 +00:00
cl65 -o $*.xl.com -O -t atarixl -m $*.atrxl.map -vm $< $(wildcard $**.s) $(IP65LIB) ../drivers/ip65_atarixl.lib
Add a C interface for atarixl target. Just some Makefile tweaks were needed...
2017-11-27 22:22:47 +00:00
rm $*.o
Added VT100 test. Re-added VT100 test that was created for KIPPERTERM development. Not very usefully as-is but a good template for any offline VT100 rendering test/debugging. Additionally the disk images were renamed to distinguish them from the disk images created in the apps directory.
2017-05-18 22:17:38 +00:00
ip65test.d64: prg
Some test program cleanup. - Simplify Makefile by allowing to use suffix '_tcp' to denote the requirement to link against TCP-capable IP65 lib. - Remove 'test' or 'test_' prefix from test program names - every program in 'test' is a test program. - Have some more test programs switch to lower case charset on the C64. - I'm no Ruby guy so don't rely on Ruby for building disk images.
2013-12-15 21:50:01 +00:00
$(C1541) -format ip65,00 d64 $@
$(C1541) -attach $@ -write dns.prg dns,p
$(C1541) -attach $@ -write dottedquad.prg dottedquad,p
$(C1541) -attach $@ -write geturl.prg geturl,p
Converted web server test from KIPPER Cart to "classic" IP65 program.
2014-04-27 15:47:07 +00:00
$(C1541) -attach $@ -write httpd.prg httpd,p
Renamed 'tcp' to 'math' as the name 'tcp' will be needed soon.
2017-11-03 23:25:09 +00:00
$(C1541) -attach $@ -write math.prg math,p
Some test program cleanup. - Simplify Makefile by allowing to use suffix '_tcp' to denote the requirement to link against TCP-capable IP65 lib. - Remove 'test' or 'test_' prefix from test program names - every program in 'test' is a test program. - Have some more test programs switch to lower case charset on the C64. - I'm no Ruby guy so don't rely on Ruby for building disk images.
2013-12-15 21:50:01 +00:00
$(C1541) -attach $@ -write parser.prg parser,p
$(C1541) -attach $@ -write ping.prg ping,p
$(C1541) -attach $@ -write sntp.prg sntp,p
Added C interface to TCP functions.
2017-11-06 22:36:44 +00:00
$(C1541) -attach $@ -write tcp.prg tcp,p
Some test program cleanup. - Simplify Makefile by allowing to use suffix '_tcp' to denote the requirement to link against TCP-capable IP65 lib. - Remove 'test' or 'test_' prefix from test program names - every program in 'test' is a test program. - Have some more test programs switch to lower case charset on the C64. - I'm no Ruby guy so don't rely on Ruby for building disk images.
2013-12-15 21:50:01 +00:00
$(C1541) -attach $@ -write tftp.prg tftp,p
Added timer test to Makefile.
2018-02-06 12:06:05 +00:00
$(C1541) -attach $@ -write timer.prg timer,p
Introduced C interface to IP65. The IP5 usage of ld65 segments and zeropage variables was made compatible with cc65 C programs already a while ago. This commit is the next logical step which is to introduce the actual C interface to IP65. IP65 for C programs shares the the ip65.lib / ip65_tcp.lib with IP65 for assembler programs. However the various libraries from the 'drivers' are not reused. Instead there's exactly one library for every target named ip65_<target>.lib. Those libraries contain only functions used by ip65.lib / ip65_tcp.lib. TODOs: - Introduce c64_timer.s and atr_timer.s. - Add a C interface to the rest of the IP65 functionality (especially TCP).
2017-11-05 13:28:49 +00:00
$(C1541) -attach $@ -write udp.prg udp,p
Added VT100 test. Re-added VT100 test that was created for KIPPERTERM development. Not very usefully as-is but a good template for any offline VT100 rendering test/debugging. Additionally the disk images were renamed to distinguish them from the disk images created in the apps directory.
2017-05-18 22:17:38 +00:00
$(C1541) -attach $@ -write vt100.prg vt100,p
more refactoring to accomodate w5100 driver git-svn-id: http://svn.code.sf.net/p/netboot65/code@289 93682198-c243-4bdb-bd91-e943c89aac3b
2010-12-10 13:12:18 +00:00
Added VT100 test. Re-added VT100 test that was created for KIPPERTERM development. Not very usefully as-is but a good template for any offline VT100 rendering test/debugging. Additionally the disk images were renamed to distinguish them from the disk images created in the apps directory.
2017-05-18 22:17:38 +00:00
ip65test.dsk: bin
Added files necessary to build disk images.
2018-07-20 17:12:51 +00:00
cp ../build/prodos.dsk $@
Adjusted to cc65 2.17 which generates AppleSingle files.
2018-03-08 15:12:23 +00:00
java -jar $(AC) -as $@ dns < dns.bin
java -jar $(AC) -as $@ geturl < geturl.bin
java -jar $(AC) -as $@ httpd < httpd.bin
java -jar $(AC) -as $@ httpd.slotscan < httpd-slotscan.bin
java -jar $(AC) -as $@ math < math.bin
java -jar $(AC) -as $@ parser < parser.bin
java -jar $(AC) -as $@ ping < ping.bin
java -jar $(AC) -as $@ sntp < sntp.bin
java -jar $(AC) -as $@ tcp < tcp.bin
java -jar $(AC) -as $@ tftp < tftp.bin
java -jar $(AC) -as $@ udp < udp.bin
java -jar $(AC) -as $@ vt100 < vt100.bin
split out kippergo (gopher/basic telnet) from kipperterm (telnet only, but with XMODEM) git-svn-id: http://svn.code.sf.net/p/netboot65/code@223 93682198-c243-4bdb-bd91-e943c89aac3b
2009-12-06 06:24:18 +00:00
Add a C interface for atarixl target. Just some Makefile tweaks were needed...
2017-11-27 22:22:47 +00:00
ip65test.atr: com xl.com
Added support for the ATARI 8-bit with Dragon Cart. The actual ATARI-specific code is "inspired" by the IP65 variant published in http://atariage.com/forums/topic/211161-dragoncart-software/?p=2734494. The timer routines are modeled after the ones for the VIC20.
2015-08-28 13:19:52 +00:00
mkdir atr
Added files necessary to build disk images.
2018-07-20 17:12:51 +00:00
cp ../build/dos.sys atr/dos.sys
cp ../build/dup.sys atr/dup.sys
cp dns.com atr/dns.com
cp geturl.com atr/geturl.com
cp httpd.com atr/httpd.com
cp math.com atr/math.com
cp parser.com atr/parser.com
cp ping.com atr/ping.com
cp sntp.com atr/sntp.com
cp tcp.com atr/tcp.com
cp tcp.xl.com atr/tcpxl.com
cp tftp.com atr/tftp.com
cp timer.com atr/timer.com
cp timer.xl.com atr/timerxl.com
cp udp.com atr/udp.com
cp udp.xl.com atr/udpxl.com
cp vt100.com atr/vt100.com
Added support for the ATARI 8-bit with Dragon Cart. The actual ATARI-specific code is "inspired" by the IP65 variant published in http://atariage.com/forums/topic/211161-dragoncart-software/?p=2734494. The timer routines are modeled after the ones for the VIC20.
2015-08-28 13:19:52 +00:00
$(DIR2ATR) -b Dos25 1040 $@ atr
rm -r atr
Introduced C interface to IP65. The IP5 usage of ld65 segments and zeropage variables was made compatible with cc65 C programs already a while ago. This commit is the next logical step which is to introduce the actual C interface to IP65. IP65 for C programs shares the the ip65.lib / ip65_tcp.lib with IP65 for assembler programs. However the various libraries from the 'drivers' are not reused. Instead there's exactly one library for every target named ip65_<target>.lib. Those libraries contain only functions used by ip65.lib / ip65_tcp.lib. TODOs: - Introduce c64_timer.s and atr_timer.s. - Add a C interface to the rest of the IP65 functionality (especially TCP).
2017-11-05 13:28:49 +00:00
%.exe: %.c
cl /Fe:$@ $^
git-svn-id: http://svn.code.sf.net/p/netboot65/code@15 93682198-c243-4bdb-bd91-e943c89aac3b
2009-01-22 01:27:03 +00:00
clean:
1. Replaced IP65 Ethernet drivers with Contiki drivers. * CS8900A The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and removes received frames from the chip if there's no room to send frames. * LAN91C96 The Contiki driver was used by IP65 more or less unchanged in the first place. * W5100 The Contiki driver allows to adjust the chip base addr at runtime (which allows to support different slots in the Apple II) and stays clear from the W5100 hybrid mode. It presumes a fully functional W5100 register auto-increment and pre-calculates necessary W5100 frame buffer wrap-arounds and thus achieves the maximal 6502 <-> W5100 transfer speed.
2014-06-12 22:00:53 +00:00
make -C ../ip65 clean
make -C ../drivers clean
Introduced C interface to IP65. The IP5 usage of ld65 segments and zeropage variables was made compatible with cc65 C programs already a while ago. This commit is the next logical step which is to introduce the actual C interface to IP65. IP65 for C programs shares the the ip65.lib / ip65_tcp.lib with IP65 for assembler programs. However the various libraries from the 'drivers' are not reused. Instead there's exactly one library for every target named ip65_<target>.lib. Those libraries contain only functions used by ip65.lib / ip65_tcp.lib. TODOs: - Introduce c64_timer.s and atr_timer.s. - Add a C interface to the rest of the IP65 functionality (especially TCP).
2017-11-05 13:28:49 +00:00
-rm -f *.o *.prg *.bin *.com *.vicprg *.map *.obj *.exe
Moved httpd.slotscan to ip65test.dsk and dropped ip65demo.dsk. Now that with Telnet65 there is a "real" application there's no point anymore in the ip65demo.dsk. Therefore httpd.slotscan is now part of the ordinary ip65test.dsk.
2017-11-03 23:40:35 +00:00
-rm -f ip65test.d64 ip65test.dsk ip65test.atr
Reference in New Issue Copy Permalink