mirror of
https://github.com/bobbimanners/emailler.git
synced 2024-10-31 13:08:40 +00:00
4577c2ab19
So far the base address of the Ethernet chip was a general property of all Ethernet drivers. It served two purposes: 1. Allowing to use a single Ethernet driver for a certain Ethernet chip, no matter what machine was connected to the chip. 2. Allowing use an Ethernet card in all Apple II slots. However, we now use customized Ethernet drivers for the individual machines so 1.) isn't relevant anymore. In fact one wants to omit the overhead of a runtime-adjustable base address where it isn't needed. So only the Apple II slots are left. But this should rather be a driver-internal approach then. We should just hand the driver the slot number the user wants to use and have the driver do its thing. Independently from the aspect if the driver parameter is a base address or a slot number the parameter handling was changed too. For asm programs there was so far a specific init function to be called prior to the main init function if it was desired to chnage the parameter default. This was done to keep the main init function backward compatible. But now that the parameter (now the slot number) is only used on the Apple II anyhow it seems reasonable to drop the specific init function again and just provide the parameter to the main init function. All C64-only user code can stay as-is. Only Apple II user code needs to by adjusted. Please note that this change only affects asm programs, C programs always used a single init function with the Apple II slot number as parameter.
445 lines
8.4 KiB
ArmAsm
445 lines
8.4 KiB
ArmAsm
;
|
|
; Copyright (c) 2007, Adam Dunkels and Oliver Schmidt
|
|
; All rights reserved.
|
|
;
|
|
; Redistribution and use in source and binary forms, with or without
|
|
; modification, are permitted provided that the following conditions
|
|
; are met:
|
|
; 1. Redistributions of source code must retain the above copyright
|
|
; notice, this list of conditions and the following disclaimer.
|
|
; 2. Redistributions in binary form must reproduce the above copyright
|
|
; notice, this list of conditions and the following disclaimer in the
|
|
; documentation and/or other materials provided with the distribution.
|
|
; 3. Neither the name of the Institute nor the names of its contributors
|
|
; may be used to endorse or promote products derived from this software
|
|
; without specific prior written permission.
|
|
;
|
|
; THIS SOFTWARE IS PROVIDED BY THE INSTITUTE AND CONTRIBUTORS ``AS IS'' AND
|
|
; ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
; IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
; ARE DISCLAIMED. IN NO EVENT SHALL THE INSTITUTE OR CONTRIBUTORS BE LIABLE
|
|
; FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
; DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
; OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
; HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
; LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
; OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
; SUCH DAMAGE.
|
|
;
|
|
; This file is part of the Contiki operating system.
|
|
;
|
|
; Author: Adam Dunkels <adam@sics.se>, Oliver Schmidt <ol.sc@web.de>
|
|
;
|
|
;---------------------------------------------------------------------
|
|
|
|
.macpack module
|
|
module_header _cs8900a
|
|
|
|
; Driver signature
|
|
.byte $65, $74, $68 ; "eth"
|
|
.byte $01 ; Ethernet driver API version number
|
|
|
|
; Ethernet address
|
|
mac: .byte $00, $0E, $3A ; OUI of Cirrus Logic
|
|
.byte $11, $11, $11
|
|
|
|
; Buffer attributes
|
|
bufaddr:.res 2 ; Address
|
|
bufsize:.res 2 ; Size
|
|
|
|
; Jump table.
|
|
jmp init
|
|
jmp poll
|
|
jmp send
|
|
jmp exit
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
.if DYN_DRV
|
|
|
|
.zeropage
|
|
sp: .res 2 ; Stack pointer (Do not trash !)
|
|
reg: .res 2 ; Address of rxtxreg
|
|
ptr: .res 2 ; Indirect addressing pointer
|
|
len: .res 2 ; Frame length
|
|
cnt: .res 2 ; Frame length counter
|
|
|
|
.else
|
|
|
|
.include "zeropage.inc"
|
|
reg := ptr1 ; Address of rxtxreg
|
|
ptr := ptr2 ; Indirect addressing pointer
|
|
len := ptr3 ; Frame length
|
|
cnt := ptr4 ; Frame length counter
|
|
|
|
.endif
|
|
|
|
;=====================================================================
|
|
|
|
.ifdef __CBM__
|
|
|
|
.ifdef __C64__
|
|
rxtxreg := $DE08
|
|
txcmd := $DE0C
|
|
txlen := $DE0E
|
|
isq := $DE00
|
|
packetpp := $DE02
|
|
ppdata := $DE04
|
|
.endif
|
|
|
|
.ifdef __VIC20__
|
|
rxtxreg := $9808
|
|
txcmd := $980C
|
|
txlen := $980E
|
|
isq := $9800
|
|
packetpp := $9802
|
|
ppdata := $9804
|
|
.endif
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
.code
|
|
|
|
init:
|
|
; Activate C64 RR clockport in order to operate RR-Net
|
|
; (RR config register overlays unused CS8900A ISQ register)
|
|
lda isq+1
|
|
ora #$01 ; Set clockport bit
|
|
sta isq+1
|
|
|
|
.endif
|
|
|
|
;=====================================================================
|
|
|
|
.ifdef __APPLE2__
|
|
|
|
.rodata
|
|
|
|
fixup: .byte fixup02-fixup01, fixup03-fixup02, fixup04-fixup03
|
|
.byte fixup05-fixup04, fixup06-fixup05, fixup07-fixup06
|
|
.byte fixup08-fixup07, fixup09-fixup08, fixup10-fixup09
|
|
.byte fixup11-fixup10, fixup12-fixup11, fixup13-fixup12
|
|
.byte fixup14-fixup13, fixup15-fixup14, fixup16-fixup15
|
|
.byte fixup17-fixup16, fixup18-fixup17, fixup19-fixup18
|
|
.byte fixup20-fixup19, fixup21-fixup20, fixup22-fixup21
|
|
.byte fixup23-fixup22, fixup24-fixup23
|
|
|
|
fixups = * - fixup
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
; The addresses are fixed up at runtime
|
|
rxtxreg := $C080
|
|
txcmd := $C084
|
|
txlen := $C086
|
|
isq := $C088
|
|
packetpp := $C08A
|
|
ppdata := $C08C
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
.data
|
|
|
|
init:
|
|
; Convert slot number to slot I/O offset
|
|
asl
|
|
asl
|
|
asl
|
|
asl
|
|
sta reg
|
|
|
|
; Start with first fixup location
|
|
lda #<(fixup01+1)
|
|
ldx #>(fixup01+1)
|
|
sta ptr
|
|
stx ptr+1
|
|
ldx #$FF
|
|
ldy #$00
|
|
|
|
; Fixup address at location
|
|
: lda (ptr),y
|
|
and #%10001111 ; Allow for re-init
|
|
ora reg
|
|
sta (ptr),y
|
|
|
|
; Advance to next fixup location
|
|
inx
|
|
cpx #fixups
|
|
bcs :+
|
|
lda ptr
|
|
clc
|
|
adc fixup,x
|
|
sta ptr
|
|
bcc :-
|
|
inc ptr+1
|
|
bcs :- ; Always
|
|
:
|
|
|
|
.endif
|
|
|
|
;=====================================================================
|
|
|
|
.ifdef __ATARI__
|
|
|
|
rxtxreg := $D500
|
|
txcmd := $D504
|
|
txlen := $D506
|
|
isq := $D508
|
|
packetpp := $D50A
|
|
ppdata := $D50C
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
.code
|
|
|
|
init:
|
|
|
|
.endif
|
|
|
|
;=====================================================================
|
|
|
|
; Check EISA registration number of Crystal Semiconductor
|
|
; PACKETPP = $0000, PPDATA == $630E ?
|
|
lda #$00
|
|
tax
|
|
jsr packetpp_ax
|
|
lda #$63^$0E
|
|
fixup01:eor ppdata
|
|
fixup02:eor ppdata+1
|
|
beq :+
|
|
sec
|
|
rts
|
|
|
|
; Initiate a chip-wide reset
|
|
; PACKETPP = $0114, PPDATA = $0040
|
|
: lda #$14
|
|
jsr packetpp_a1
|
|
ldy #$40
|
|
fixup03:sty ppdata
|
|
: jsr packetpp_a1
|
|
fixup04:ldy ppdata
|
|
and #$40
|
|
bne :-
|
|
|
|
; Accept valid unicast + broadcast frames
|
|
; PACKETPP = $0104, PPDATA = $0D05
|
|
lda #$04
|
|
jsr packetpp_a1
|
|
lda #$05
|
|
ldx #$0D
|
|
jsr ppdata_ax
|
|
|
|
; Set MAC address
|
|
; PACKETPP = $0158, PPDATA = MAC[0], MAC[1]
|
|
; PACKETPP = $015A, PPDATA = MAC[2], MAC[3]
|
|
; PACKETPP = $015C, PPDATA = MAC[4], MAC[5]
|
|
ldy #$58
|
|
: tya
|
|
jsr packetpp_a1
|
|
lda mac-$58,y
|
|
ldx mac-$58+1,y
|
|
jsr ppdata_ax
|
|
iny
|
|
iny
|
|
cpy #$58+6
|
|
bcc :-
|
|
|
|
; Turn on transmission and reception of frames
|
|
; PACKETPP = $0112, PPDATA = $00D3
|
|
lda #$12
|
|
jsr packetpp_a1
|
|
lda #$D3
|
|
ldx #$00
|
|
jsr ppdata_ax
|
|
txa
|
|
clc
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
poll:
|
|
; Check receiver event register to see if there
|
|
; are any valid unicast frames avaliable
|
|
; PACKETPP = $0124, PPDATA & $0D00 ?
|
|
lda #$24
|
|
jsr packetpp_a1
|
|
fixup05:lda ppdata+1
|
|
and #$0D
|
|
beq :+
|
|
|
|
; Process the incoming frame
|
|
; --------------------------
|
|
|
|
; Read receiver event and discard it
|
|
; RXTXREG
|
|
fixup06:ldx rxtxreg+1
|
|
fixup07:lda rxtxreg
|
|
|
|
; Read frame length
|
|
; cnt = len = RXTXREG
|
|
fixup08:ldx rxtxreg+1
|
|
fixup09:lda rxtxreg
|
|
sta len
|
|
stx len+1
|
|
sta cnt
|
|
stx cnt+1
|
|
|
|
; Adjust odd frame length
|
|
jsr adjustcnt
|
|
|
|
; Is bufsize < cnt ?
|
|
lda bufsize
|
|
cmp cnt
|
|
lda bufsize+1
|
|
sbc cnt+1
|
|
bcs :++
|
|
|
|
; Yes, skip frame
|
|
jsr skipframe
|
|
|
|
; No frame ready
|
|
lda #$00
|
|
: tax
|
|
sec
|
|
rts
|
|
|
|
; Read bytes into buffer
|
|
: jsr adjustptr
|
|
:
|
|
fixup10:lda rxtxreg
|
|
sta (ptr),y
|
|
iny
|
|
fixup11:lda rxtxreg+1
|
|
sta (ptr),y
|
|
iny
|
|
bne :-
|
|
inc ptr+1
|
|
dex
|
|
bpl :-
|
|
|
|
; Return frame length
|
|
lda len
|
|
ldx len+1
|
|
clc
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
send:
|
|
; Save frame length
|
|
sta cnt
|
|
stx cnt+1
|
|
|
|
; Transmit command
|
|
lda #$C9
|
|
ldx #$00
|
|
fixup12:sta txcmd
|
|
fixup13:stx txcmd+1
|
|
lda cnt
|
|
ldx cnt+1
|
|
fixup14:sta txlen
|
|
fixup15:stx txlen+1
|
|
|
|
; Adjust odd frame length
|
|
jsr adjustcnt
|
|
|
|
; 8 retries
|
|
ldy #$08
|
|
|
|
; Check for avaliable buffer space
|
|
; PACKETPP = $0138, PPDATA & $0100 ?
|
|
: lda #$38
|
|
jsr packetpp_a1
|
|
fixup16:lda ppdata+1
|
|
and #$01
|
|
bne :+
|
|
|
|
; No space avaliable, skip a received frame
|
|
jsr skipframe
|
|
|
|
; And try again
|
|
dey
|
|
bne :-
|
|
sec
|
|
rts
|
|
|
|
; Send the frame
|
|
; --------------
|
|
|
|
; Write bytes from buffer
|
|
: jsr adjustptr
|
|
: lda (ptr),y
|
|
fixup17:sta rxtxreg
|
|
iny
|
|
lda (ptr),y
|
|
fixup18:sta rxtxreg+1
|
|
iny
|
|
bne :-
|
|
inc ptr+1
|
|
dex
|
|
bpl :-
|
|
clc
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
exit:
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
packetpp_a1:
|
|
ldx #$01
|
|
packetpp_ax:
|
|
fixup19:sta packetpp
|
|
fixup20:stx packetpp+1
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
ppdata_ax:
|
|
fixup21:sta ppdata
|
|
fixup22:stx ppdata+1
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
skipframe:
|
|
; PACKETPP = $0102, PPDATA = PPDATA | $0040
|
|
lda #$02
|
|
jsr packetpp_a1
|
|
fixup23:lda ppdata
|
|
ora #$40
|
|
fixup24:sta ppdata
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
adjustcnt:
|
|
lsr
|
|
bcc :+
|
|
inc cnt
|
|
bne :+
|
|
inc cnt+1
|
|
: rts
|
|
|
|
;---------------------------------------------------------------------
|
|
|
|
adjustptr:
|
|
lda cnt
|
|
ldx cnt+1
|
|
eor #$FF ; Two's complement part 1
|
|
tay
|
|
iny ; Two's complement part 2
|
|
sty reg
|
|
sec
|
|
lda bufaddr
|
|
sbc reg
|
|
sta ptr
|
|
lda bufaddr+1
|
|
sbc #$00
|
|
sta ptr+1
|
|
rts
|
|
|
|
;---------------------------------------------------------------------
|