mirror of
https://github.com/bobbimanners/emailler.git
synced 2024-11-18 21:07:03 +00:00
447 lines
13 KiB
ArmAsm
447 lines
13 KiB
ArmAsm
.feature c_comments
|
|
|
|
/******************************************************************************
|
|
|
|
Copyright (c) 2014, Oliver Schmidt
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
* Redistributions of source code must retain the above copyright
|
|
notice, this list of conditions and the following disclaimer.
|
|
* Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
* Neither the name of the <organization> nor the
|
|
names of its contributors may be used to endorse or promote products
|
|
derived from this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
DISCLAIMED. IN NO EVENT SHALL OLIVER SCHMIDT BE LIABLE FOR ANY
|
|
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
|
|
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
******************************************************************************/
|
|
|
|
.export _w5100_init
|
|
.export _w5100_recv_init, _w5100_recv_byte, _w5100_recv_done
|
|
.export _w5100_send_init, _w5100_send_byte, _w5100_send_done
|
|
|
|
ptr := $06 ; 2 byte pointer value
|
|
sha := $08 ; 2 byte physical addr shadow ($F000-$FFFF)
|
|
adv := $EB ; 2 byte pointer register advancement
|
|
len := $ED ; 2 byte frame length
|
|
tmp := $FA ; 1 byte temporary value
|
|
bas := $FB ; 1 byte socket 1 Base Address (hibyte)
|
|
|
|
mode := $C0B4
|
|
addr := $C0B5
|
|
data := $C0B7
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
_w5100_init:
|
|
; Input
|
|
; AX: Address of ip_parms (serverip, cfg_ip, cfg_netmask, cfg_gateway)
|
|
; Output
|
|
; None
|
|
; Remark
|
|
; The ip_parms are only accessed during this function.
|
|
|
|
; Set ip_parms pointer
|
|
sta ptr
|
|
stx ptr+1
|
|
|
|
; S/W Reset
|
|
lda #$80
|
|
sta mode
|
|
: lda mode
|
|
bmi :-
|
|
|
|
; Indirect Bus I/F mode, Address Auto-Increment
|
|
lda #$03
|
|
sta mode
|
|
|
|
; Gateway IP Address Register: IP address of router on local network
|
|
ldx #$00 ; Hibyte
|
|
ldy #$01 ; Lobyte
|
|
jsr set_addr
|
|
ldy #3*4 ; ip_parms::cfg_gateway
|
|
jsr set_ipv4value
|
|
|
|
; Subnet Mask Register: Netmask of local network
|
|
; -> addr is already set
|
|
ldy #2*4 ; ip_parms::cfg_netmask
|
|
jsr set_ipv4value
|
|
|
|
; Source Hardware Address Register: MAC Address
|
|
; -> addr is already set
|
|
ldx #$00
|
|
: lda mac,x
|
|
sta data
|
|
inx
|
|
cpx #$06
|
|
bcc :-
|
|
|
|
; Source IP Address Register: IP address of local machine
|
|
; -> addr is already set
|
|
ldy #1*4 ; ip_parms::cfg_ip
|
|
jsr set_ipv4value
|
|
|
|
; RX Memory Size Register: Assign 4KB each to sockets 0 and 1
|
|
ldx #$00 ; Hibyte
|
|
ldy #$1A ; Lobyte
|
|
jsr set_addr
|
|
lda #$0A
|
|
sta data
|
|
|
|
; TX Memory Size Register: Assign 4KB each to sockets 0 and 1
|
|
; -> addr is already set
|
|
; -> A is still $0A
|
|
sta data
|
|
|
|
; Socket 1 Source Port Register: 6502
|
|
ldy #$04
|
|
jsr set_addrsocket1
|
|
jsr set_data6502
|
|
|
|
; Socket 1 Destination IP Address Register: Destination IP address
|
|
; This has to be the last call to set_ipv4value because it writes
|
|
; as a side effect to 'hdr' and it is the destination IP address
|
|
; that has to be present in 'hdr' after initialization
|
|
ldy #$0C
|
|
jsr set_addrsocket1
|
|
ldy #0*4 ; ip_parms::serverip
|
|
jsr set_ipv4value
|
|
|
|
; Socket 1 Destination Port Register: 6502
|
|
; -> addr is already set
|
|
jsr set_data6502
|
|
|
|
; Socket 1 Mode Register: UDP
|
|
ldy #$00
|
|
jsr set_addrsocket1
|
|
lda #$02
|
|
sta data
|
|
|
|
; Socket 1 Command Register: OPEN
|
|
; -> addr is already set
|
|
lda #$01
|
|
sta data
|
|
rts
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
set_ipv4value:
|
|
ldx #$03
|
|
: lda (ptr),y
|
|
iny
|
|
sta data
|
|
sta hdr+2,x
|
|
dex
|
|
bpl :-
|
|
rts
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
set_data6502:
|
|
lda #<6502
|
|
ldx #>6502
|
|
stx data ; Hibyte
|
|
sta data ; Lobyte
|
|
rts
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
_w5100_recv_init:
|
|
; Input
|
|
; None
|
|
; Output
|
|
; AX: Number of bytes to receive
|
|
; Remark
|
|
; To be called before recv_byte.
|
|
|
|
; Socket 1 RX Received Size Register: 0 or volatile ?
|
|
lda #$26 ; Socket RX Received Size Register
|
|
jsr prolog
|
|
bne error
|
|
|
|
; Socket 1 RX Read Pointer Register
|
|
; -> addr already set
|
|
|
|
; Calculate and set pyhsical address
|
|
ldx #>$7000 ; Socket 1 RX Base Address
|
|
jsr set_addrphysical
|
|
|
|
; Compare peer IP addr and peer port with expected values
|
|
; in 'hdr' and set C(arry flag) if there's a mismatch
|
|
clc
|
|
ldx #$05
|
|
stx tmp
|
|
: jsr _w5100_recv_byte ; Doesn't trash C
|
|
ldx tmp
|
|
eor hdr,x ; Doesn't trash C
|
|
beq :+
|
|
sec
|
|
: dec tmp
|
|
bpl :--
|
|
php ; Save C
|
|
|
|
; Read data length
|
|
jsr _w5100_recv_byte ; Hibyte
|
|
sta len+1
|
|
jsr _w5100_recv_byte ; Lobyte
|
|
sta len
|
|
|
|
; Add 8 byte header to set pointer advancement
|
|
clc
|
|
adc #<$0008
|
|
sta adv
|
|
lda len+1
|
|
adc #>$0008
|
|
sta adv+1
|
|
|
|
; Skip frame if it doesn't originate from our
|
|
; expected communicaion peer
|
|
plp ; Restore C
|
|
bcs _w5100_recv_done
|
|
|
|
; Return data length
|
|
lda len
|
|
ldx len+1
|
|
rts
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
_w5100_send_init:
|
|
; Input
|
|
; AX: Number of bytes to send
|
|
; Output
|
|
; A: Nonzero if ready to send
|
|
; Remark
|
|
; To be called before send_byte.
|
|
|
|
; Set pointer advancement
|
|
sta adv
|
|
stx adv+1
|
|
|
|
; Socket 1 TX Free Size Register: 0 or volatile ?
|
|
lda #$20 ; Socket TX Free Size Register
|
|
jsr prolog
|
|
bne error
|
|
|
|
; Socket 1 TX Free Size Register: < advancement ?
|
|
cpx adv ; Lobyte
|
|
sbc adv+1 ; Hibyte
|
|
bcc error ; Not enough free size
|
|
|
|
; Socket 1 TX Write Pointer Register
|
|
ldy #$24
|
|
jsr set_addrsocket1
|
|
|
|
; Calculate and set pyhsical address
|
|
ldx #>$5000 ; Socket 1 TX Base Address
|
|
jsr set_addrphysical
|
|
|
|
; Return success
|
|
lda #$01
|
|
ldx #>$0000 ; Required by cc65 C callers
|
|
rts
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
error:
|
|
lda #<$0000
|
|
tax
|
|
rts
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
prolog:
|
|
; Check for completion of previous command
|
|
; Socket 1 Command Register: 0 ?
|
|
jsr set_addrcmdreg1
|
|
ldx data
|
|
bne :++ ; Not completed -> Z = 0
|
|
|
|
; Socket Size Register: not 0 ?
|
|
tay ; Select Size Register
|
|
jsr get_wordsocket1
|
|
stx ptr ; Lobyte
|
|
sta ptr+1 ; Hibyte
|
|
ora ptr
|
|
bne :+
|
|
inx ; -> Z = 0
|
|
rts
|
|
|
|
; Socket Size Register: volatile ?
|
|
: jsr get_wordsocket1
|
|
cpx ptr ; Lobyte
|
|
bne :+ ; Volatile size -> Z = 0
|
|
cmp ptr+1 ; Hibyte
|
|
; bne :+ ; Volatile size -> Z = 0
|
|
: rts
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
_w5100_recv_byte:
|
|
; Input
|
|
; None
|
|
; Output
|
|
; A: Byte received
|
|
; Remark
|
|
; May be called as often as indicated by recv_init.
|
|
|
|
; Read byte
|
|
lda data
|
|
|
|
; Increment physical addr shadow lobyte
|
|
inc sha
|
|
beq incsha
|
|
ldx #>$0000 ; Required by cc65 C callers
|
|
rts
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
_w5100_send_byte:
|
|
; Input
|
|
; A: Byte to send
|
|
; Output
|
|
; None
|
|
; Remark
|
|
; Should be called as often as indicated to send_init.
|
|
|
|
; Write byte
|
|
sta data
|
|
|
|
; Increment physical addr shadow lobyte
|
|
inc sha
|
|
beq incsha
|
|
rts
|
|
|
|
incsha:
|
|
; Increment physical addr shadow hibyte
|
|
inc sha+1
|
|
beq set_addrbase
|
|
ldx #>$0000 ; Required by cc65 C callers (_w5100_recv_byte)
|
|
rts
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
_w5100_recv_done:
|
|
; Input
|
|
; None
|
|
; Output
|
|
; None
|
|
; Remark
|
|
; Mark data indicated by recv_init as processed (independently from how
|
|
; often recv_byte was called), if not called then next call of recv_init
|
|
; will just indicate the very same data again.
|
|
|
|
; Set parameters for commit code
|
|
lda #$40 ; RECV
|
|
ldy #$28 ; Socket RX Read Pointer Register
|
|
bne epilog ; Always
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
_w5100_send_done:
|
|
; Input
|
|
; None
|
|
; Output
|
|
; None
|
|
; Remark
|
|
; Actually send data indicated to send_init (independently from how often
|
|
; send_byte was called), if not called then send_init (and send_byte) are
|
|
; just NOPs.
|
|
|
|
; Set parameters for commit code
|
|
lda #$20 ; SEND
|
|
ldy #$24 ; Socket TX Write Pointer Register
|
|
|
|
epilog:
|
|
; Advance pointer register
|
|
jsr set_addrsocket1
|
|
tay ; Save command
|
|
clc
|
|
lda ptr
|
|
adc adv
|
|
tax
|
|
lda ptr+1
|
|
adc adv+1
|
|
sta data ; Hibyte
|
|
stx data ; Lobyte
|
|
|
|
; Set command register
|
|
tya ; Restore command
|
|
jsr set_addrcmdreg1
|
|
sta data
|
|
|
|
; Return error (_w5100_recv_init)
|
|
bne error ; Always
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
set_addrphysical:
|
|
lda data ; Hibyte
|
|
ldy data ; Lobyte
|
|
sty ptr
|
|
sta ptr+1
|
|
and #>$0FFF ; Socket Mask Address (hibyte)
|
|
stx bas ; Socket Base Address (hibyte)
|
|
ora bas
|
|
tax
|
|
ora #>$F000 ; Move sha/sha+1 to $F000-$FFFF
|
|
sty sha
|
|
sta sha+1
|
|
|
|
set_addr:
|
|
stx addr ; Hibyte
|
|
sty addr+1 ; Lobyte
|
|
ldx #>$0000 ; Required by cc65 C callers (_w5100_recv_byte)
|
|
rts
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
set_addrcmdreg1:
|
|
ldy #$01 ; Socket Command Register
|
|
|
|
set_addrsocket1:
|
|
ldx #>$0500 ; Socket 1 register base address
|
|
bne set_addr ; Always
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
set_addrbase:
|
|
ldx bas ; Socket Base Address (hibyte)
|
|
ldy #<$0000 ; Socket Base Address (lobyte)
|
|
beq set_addr ; Always
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
get_wordsocket1:
|
|
jsr set_addrsocket1
|
|
lda data ; Hibyte
|
|
ldx data ; Lobyte
|
|
rts
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
.rodata
|
|
|
|
mac: .byte $00, $08, $DC ; OUI of WIZnet
|
|
.byte $11, $11, $11
|
|
|
|
;------------------------------------------------------------------------------
|
|
|
|
.data
|
|
|
|
hdr: .word 6502 ; Destination Port
|
|
.res 4 ; Destination IP Address
|