MII Version Changelog

1.5

• BIG update, loads of changes, fixes, improvements.
• New super UI, using home-made libmui, channeling both GS/OS and MacOS 7.x!
• New emulation fixes, way more accurate. Video redone, audio redone.
• New front-end program using XLib and OpenGL 'low level'.
• New Icon.

1.0

• Fixed a few graphics rendering bugs/color swapped
• Fixed a few Makefile issues involving pathnamed with 'spaces' in them.
• More tweaks to the emulation, added a few cycles here and there.

0.9

• Added a 'debugger' shell, accessible via telnet.
• Added a mini-assembler, used to compile the drivers and the CPU unit tests.
• Added a 'Titan Accelerator IIe' simulation, to turn on/off fast mode.

0.5

• Initial release

MII Apple //e Emulator

I know there are many out there, but none of them were ticking my fancy, so I decide to write my own. To start with it was "How hard can it be really?" then it snowballed as more and more things were fixed & added. It's been shelved for a while because well, it lacked documentation, headers, licence and stuff, so I spent some time cleaning it up for release.

One primary reason for this project was that linapple (or -pie) codebase is really horrible. It dates back from 2000's or before, with loads of Windows crud leftover, some SDL crud added, the audio just doesn't really work, and overall if you want to hack around the codebase, it's pretty dreadful.

Quick Howto Load & Boot

I wanted something:

• Modern, Clean code, modular -- in the spirit of simavr, usable as a library.
• Made for linux. In C. With a Makefile. None of the trendy bloatware.
• Small, Fast.
• Minimal dependencies.
• No gigantic config file.
• I didn't need II+ or unenhanced IIe, just 65c02 //e.

Double hires in color

What can it do?

• 65c02 //e with 128K of ram.
• Support all known graphic modes:
  • Double-hires in mono and color, with automatic switch
  • All the other modes in color/mono
  • Color, Green, Amber rendering
  • Simulated 'scanlines' to make it look vintage
• Speaker audio. ALSA For playback.
  • Adds a small 'attack' filter when playing back to soften the often annoying 'click' of typical audio effects from the apple II.
• Mouse Card -- mouse isn't captured like in some other emulators.
• No Slot Clock
• Joystick Support
• Smartport DMA 'hard drive' card
• "Titan Accelerator //e" simulation, to turn on/off fast mode.
• Terence's J Boldt 1MB ROM card, also because I own a couple!
• Floppy Drive [more on that later]
• No dependencies (X11) OpenGL rendering
• Built-in debugger (using telnet access)
• Super cool looking UI!

Good old green monitor style. Theres Amber too.

How to I compile it and run it?

• You need a C compiler, make, and a few libraries:
  • libasound2-dev [ optional, for audio ]
  • libgl-dev
  • libglu-dev
  • libx11-dev
  • libpixman-1-dev
• Many of them will probably be installed already.
• For more details on development, see Compiling
• Then just type make and it should compile.
• To run it, just type build-x86_64-linux-gnu/bin/mii_emu_gl and it should start.

Command line options

If you run it with no options, and there are no config file, it will present you with a dialog to select the ROMs and the drives.

Main slot configuration dialog

You can also use the command line to specify them, and other options.

• mii_emu_gl --help will display:

  Usage: ./build-x86_64-linux-gnu/bin/mii_emu_gl [options]
  Options:
  -h, --help	This help
  -v, --verbose	Verbose output
  -m, --mute	Mute the speaker
  -vol, --volume <volume>	Set speaker volume (0.0 to 10.0)
  -speed, --speed <speed>	Set the CPU speed in MHz
  -s, --slot <slot>:<driver>	Specify a slot and driver
        Slot id is 1..7
  -d, --drive <slot>:<drive>:<filename>	Specify a drive
        Slot id is 1..7, drive is 1..2
        Alternate syntax: <slot>:<drive> <filename>
  -L, --list-drivers	List available drivers
  -def, --default	Set default drives:
        Slot 4: mouse
        Slot 6: disk2
        Slot 7: smartport
  -nsc[=0|1]	Enable/Disable No Slot Clock:
        0: disable
        1: enable [Enabled by default]
  -titan[=0|1]	Enable/Disable Titan Accelerator IIe:
        0: disable [default]
        1: enable [Start at 3.58MHz]
  

  And the available drivers:

  $ ./build-x86_64-linux-gnu/bin/mii_emu -L
  mii: available drivers:
      titan - Titan Accelerator IIe
  smartport - SmartPort card
        nsc - No Slot Clock
      mouse - Mouse card
     eecard - EEPROM 1MB card
      disk2 - Apple Disk ][
  

Key Bindings

There are just a few keys that are mapped for anything useful. List is not exausive, but here are the main ones:

• Control-F12 is Control-Reset on the IIe. (Shift-Control-F12 is Open Apple-Reset)
• 'Super' left and 'Super' right are Open and Close Apple keys. These keys are mapped to the left and right 'Windows' keys on a PC keyboard, and they might want to open the start menu (I know it's the case with Cinnamon), so you might want to disable that.
• F5 sets the CPU speed to 1MHz
• F6 to 4MHz.
• These keys control the built-in debugger:
  • Control-F4 Stops the emulator; see the command prompt/telnet for how to proceed, dump state, disassembly etc.
  • Control-F5 is 'continue' -- resumes the emulator.
  • Control-F6 'steps' the emulator, ie one instruction at a time.
  • Control-F7 'next' instruction, ie step over a JSR instruction.

The built-in shell, telnet into the emulator!

Anything else?

• Well it has it's own command line shell, using my own libmish so there's loads you can do by... telnet into the emulator!
• Yes, you can telnet into the running emulator!
  • The telnet port is displayed in the window title bar.
  • The port is 'semi random' -- it tries to find one that is derivative of the program name, but it will try several until it finds one that is free.
• It has it's own debugger shell. You can:
  • Add break/watch points.
  • Step, Next (jump over JSR's), Continue, Halt
  • Has a 16 instruction trace history when hitting a breakpoint.
  • Dump memory map
  • Trigger soft switches
  • Disassemble
• Also MII comes with it's own mini-assembler, used to compile some driver and the CPU unit tests (inspired by apple2ts, see bellow)
• It embeds all the files it needs, ROMs, fonts etc so you don't need to install it, just run it, it'll work.
• MII "Hard Disk" uses 'overlay' files:
  • This writes blocks on a /separate/ (sparse) file from the main file.
  • This "Overlay" is created automatically and allows you to keep your image files clean, unless you want to 'commit' your overlay back in.
  • This allows you to make sure your disk images aren't corrupted when 'hard rebooting' the emulator, if you are in the process of testing/developing a program for example.

What it cannot do

• A2Desktop PT3 player doesn't see keypresses.
• Thats' about it really, all the other things I tried work
• Joystick support is a bit limited, no 'mapping' I used a (USB) 8bitdo NES30 Pro, and it works, but it's not perfect. But, I can play choplifter with it, so it's good enough for now... NOTE Soon will have it's own config dialog to do mapping.

What it could do with

• The main window is 1280x720 on purpose, so it could do Full Screen.
• Port it to Raspbery Pi. I don't expect compiling issues, just video issues with GLes
• Make a tool to 'flatten' overlay files back into the primary image.
• Make a UI for the debugger, instead of telnet.

Obligatory View of Total Replay, from legend 4am

Inspiration, Licence etc

• MIT Licence, I think this is the most permissive, and this work is a derivative and has a lot of inpsiration from too many projects to claim anything more restrictive.
• The CPU Emulation was inspired by a few other implementations:
  • Chips -- which I used for a little while, but it was a pain to add the 65c02 instructions, and it had stuff I didn't want/need like 6510 emulation.
  • Apple2ts -- In fact I converted a few bits from there; and I got the idea for the built-in assember from there, and some of the unit tests, AND the Smartport driver emulation idea!
• Other bits were inspired by:
  • bobbin which is newish as well, and is great for text mode, but I didn't like the fact its' all globals etc. I still borrowed the Floppy emulation from there, until I get around to do one.
  • isapple2 for other bits and pieces.
• And of course, countless books, articles and posts read over the last 40 years!