prodos-drivers/clocks/ns.clock/Makefile


CAFLAGS = --target apple2enh --list-bytes 0
LDFLAGS = --config apple2-asm.cfg

OUTDIR = ../../out
UTILDIR = $(OUTDIR)/nsclock.util

HEADERS = $(wildcard *.inc) $(wildcard ../../inc/*.inc)

TARGETS = \
	$(OUTDIR)/ns.clock.system.SYS \
	$(OUTDIR)/ns.clock.setup.SYS \
	$(UTILDIR)/set.datetime.BIN

LOG_SUCCESS=1
LOG_FAILURE=1

# For timestamps
MM = $(shell date "+%-m")
DD = $(shell date "+%-d")
YY = $(shell date "+%-y")
DEFINES = -D DD=$(DD) -D MM=$(MM) -D YY=$(YY) \
	-D LOG_SUCCESS=$(LOG_SUCCESS) -D LOG_FAILURE=$(LOG_FAILURE)

XATTR := $(shell command -v xattr 2> /dev/null)

.PHONY: clean all
all: $(OUTDIR) $(UTILDIR) $(TARGETS)

$(OUTDIR) $(UTILDIR):
	mkdir -p $@

clean:
	rm -f $(OUTDIR)/*.o
	rm -f $(OUTDIR)/*.list
	rm -f $(UTILDIR)/*.o
	rm -f $(UTILDIR)/*.list
	rm -f $(TARGETS)

$(OUTDIR)/%.o $(UTILDIR)/%.o: %.s $(HEADERS)
	ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<

$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
	ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<

$(OUTDIR)/%.SYS: $(OUTDIR)/%.o
	ld65 $(LDFLAGS) -o $@ $<

$(UTILDIR)/%.BIN: $(UTILDIR)/%.o
	ld65 $(LDFLAGS) -o $@ $<
ifdef XATTR
	xattr -wx prodos.AuxType '00 20' $@
endif
Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00
			`CAFLAGS = --target apple2enh --list-bytes 0`
			`LDFLAGS = --config apple2-asm.cfg`

Build: Use common out/ dir 2023-11-13 00:42:11 +00:00			`OUTDIR = ../../out`
			`UTILDIR = $(OUTDIR)/nsclock.util`
Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00
Build: Fix header include path in clock Makefiles 2023-11-12 21:56:52 +00:00			`HEADERS = $(wildcard .inc) $(wildcard ../../inc/.inc)`
Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00
			`TARGETS = \`
No Slot Clock: Add SET.DATETIME utility 2023-06-25 03:10:24 +00:00			`$(OUTDIR)/ns.clock.system.SYS \`
Add SETUP.SYSTEM and build .SETUP files This is an alternate approach proposed by Sean Nolan in 1987 which allows placing the driver files in a subdirectory of the root volume to avoid clutter and file ordering issues. Only a SETUP.SYSTEM file is needed at the top level, and the drivers go into a SETUPS/ directory. All drivers here (except QUIT.SYSTEM and SETUP.SYSTEM itself) have alternate forms built into the /DRIVERS/SETUPS/ directory as XYZ.SETUP instead of XYZ.SYSTEM. If you choose to use SETUP.SYSTEM, place these .SETUP files in your SETUPS/ directory. The naming doesn't matter - any SYS or BIN file can be used - but this convention makes distribution easier. These .SETUP files do NOT chain to the next file - that's handled by SETUP.SYSTEM itself. Resolves #16 2024-01-31 05:16:32 +00:00			`$(OUTDIR)/ns.clock.setup.SYS \`
Build: Use common out/ dir 2023-11-13 00:42:11 +00:00			`$(UTILDIR)/set.datetime.BIN`
Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00
Add build options to suppress success and/or failure logging 2023-05-02 02:47:10 +00:00			`LOG_SUCCESS=1`
			`LOG_FAILURE=1`

Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00			`# For timestamps`
			`MM = $(shell date "+%-m")`
			`DD = $(shell date "+%-d")`
			`YY = $(shell date "+%-y")`
Add build options to suppress success and/or failure logging 2023-05-02 02:47:10 +00:00			`DEFINES = -D DD=$(DD) -D MM=$(MM) -D YY=$(YY) \`
			`-D LOG_SUCCESS=$(LOG_SUCCESS) -D LOG_FAILURE=$(LOG_FAILURE)`
Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00
Only run xattr if present try 3 2021-03-08 00:35:52 +00:00			`XATTR := $(shell command -v xattr 2> /dev/null)`

Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00			`.PHONY: clean all`
Build: Use common out/ dir 2023-11-13 00:42:11 +00:00			`all: $(OUTDIR) $(UTILDIR) $(TARGETS)`
Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00
Build: Use common out/ dir 2023-11-13 00:42:11 +00:00			`$(OUTDIR) $(UTILDIR):`
			`mkdir -p $@`
Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00
			`clean:`
			`rm -f $(OUTDIR)/*.o`
			`rm -f $(OUTDIR)/*.list`
Build: Use common out/ dir 2023-11-13 00:42:11 +00:00			`rm -f $(UTILDIR)/*.o`
			`rm -f $(UTILDIR)/*.list`
Add package script 2020-03-13 03:15:18 +00:00			`rm -f $(TARGETS)`
Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00
Build: Use common out/ dir 2023-11-13 00:42:11 +00:00			`$(OUTDIR)/%.o $(UTILDIR)/%.o: %.s $(HEADERS)`
Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00			`ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<`

Add SETUP.SYSTEM and build .SETUP files This is an alternate approach proposed by Sean Nolan in 1987 which allows placing the driver files in a subdirectory of the root volume to avoid clutter and file ordering issues. Only a SETUP.SYSTEM file is needed at the top level, and the drivers go into a SETUPS/ directory. All drivers here (except QUIT.SYSTEM and SETUP.SYSTEM itself) have alternate forms built into the /DRIVERS/SETUPS/ directory as XYZ.SETUP instead of XYZ.SYSTEM. If you choose to use SETUP.SYSTEM, place these .SETUP files in your SETUPS/ directory. The naming doesn't matter - any SYS or BIN file can be used - but this convention makes distribution easier. These .SETUP files do NOT chain to the next file - that's handled by SETUP.SYSTEM itself. Resolves #16 2024-01-31 05:16:32 +00:00			`$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)`
			`ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<`

Build: Use common out/ dir 2023-11-13 00:42:11 +00:00			`$(OUTDIR)/%.SYS: $(OUTDIR)/%.o`
			`ld65 $(LDFLAGS) -o $@ $<`

			`$(UTILDIR)/%.BIN: $(UTILDIR)/%.o`
Combine preamble files, .gitignore, and split out ns.clock 2019-10-04 04:49:53 +00:00			`ld65 $(LDFLAGS) -o $@ $<`
Only run xattr if present try 3 2021-03-08 00:35:52 +00:00			`ifdef XATTR`
			`xattr -wx prodos.AuxType '00 20' $@`
			`endif`