Apple-2-SW/prodos-drivers
1
0
Fork 0
mirror of https://github.com/a2stuff/prodos-drivers.git synced 2024-12-26 17:29:33 +00:00
Code Issues Projects Releases Wiki Activity

Add SETUP.SYSTEM and build .SETUP files

Browse Source 
This is an alternate approach proposed by Sean Nolan in 1987 which
allows placing the driver files in a subdirectory of the root volume
to avoid clutter and file ordering issues. Only a SETUP.SYSTEM file is
needed at the top level, and the drivers go into a SETUPS/ directory.

All drivers here (except QUIT.SYSTEM and SETUP.SYSTEM itself) have
alternate forms built into the /DRIVERS/SETUPS/ directory as XYZ.SETUP
instead of XYZ.SYSTEM. If you choose to use SETUP.SYSTEM, place these
.SETUP files in your SETUPS/ directory. The naming doesn't matter -
any SYS or BIN file can be used - but this convention makes
distribution easier. These .SETUP files do **NOT** chain to the next
file - that's handled by SETUP.SYSTEM itself.

Resolves #16
This commit is contained in:
Joshua Bell 2024-01-30 21:16:32 -08:00
parent 537d79810b
commit 7bbc96924b
26 changed files with 532 additions and 52 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
Makefile
View File

@ -1,4 +1,4 @@
targets := clocks selectors accelerators ram.drv util textcolors
targets := clocks selectors accelerators ram.drv setup util textcolors
.PHONY: all $(targets) package

4
README.md
View File

@ -71,6 +71,10 @@ The intent is that you use a tool like Copy II Plus or [Apple II DeskTop](https:
Alternately, you might want to install some drivers then immediately launch into BASIC. In that case, put `BASIC.SYSTEM` after the drivers in place of `QUIT.SYSTEM`.
## Alternate Approach
If you want to keep your volume directory tidier, consider using [SETUP.SYSTEM](./setups/README.md) instead.
# Building
Fetch, build, and install [cc65](http://cc65.github.io/cc65/):

6
accelerators/zipchip/Makefile
View File

@ -7,7 +7,8 @@ OUTDIR = ../../out
HEADERS = $(wildcard *.inc) $(wildcard ../inc/*.inc)
TARGETS = \
$(OUTDIR)/zipchip.system.SYS
$(OUTDIR)/zipchip.system.SYS \
$(OUTDIR)/zipchip.setup.SYS
LOG_SUCCESS=1
LOG_FAILURE=1
@ -35,6 +36,9 @@ clean:
$(OUTDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.BIN $(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<
ifdef XATTR

4
clocks/cricket/Makefile
View File

@ -10,6 +10,7 @@ HEADERS = $(wildcard *.inc) $(wildcard ../../inc/*.inc)
TARGETS = \
$(UTILDIR)/prodos.mod.BIN \
$(OUTDIR)/cricket.system.SYS \
$(OUTDIR)/cricket.setup.SYS \
$(UTILDIR)/test.BIN \
$(UTILDIR)/set.datetime.BIN \
$(UTILDIR)/set.time.BIN \
@ -43,6 +44,9 @@ clean:
$(OUTDIR)/%.o $(UTILDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<

2
clocks/cricket/README.md
View File

@ -42,6 +42,8 @@ These `BRUN`able files are also built:
* [SET.DATE](set.date.s) sets the Cricket's current date.
* [SET.TIME](set.time.s) sets the Cricket's current time.
`CRICKET.SETUP` is for use with [SETUP.SYSTEM](../../setup/README.md)
## Resources
Cricket disks on Asimov:

6
clocks/dclock/Makefile
View File

@ -7,7 +7,8 @@ OUTDIR = ../../out
HEADERS = $(wildcard *.inc) $(wildcard ../../inc/*.inc)
TARGETS = \
$(OUTDIR)/dclock.system.SYS
$(OUTDIR)/dclock.system.SYS \
$(OUTDIR)/dclock.setup.SYS
LOG_SUCCESS=1
LOG_FAILURE=1
@ -35,6 +36,9 @@ clean:
$(OUTDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<
ifdef XATTR

2
clocks/dclock/README.md
View File

@ -11,3 +11,5 @@ Like other drivers here, this one will:
* Only attempts detection if the system is a an Apple IIc
* If detected, installs into ProDOS directly, following Technical Reference Manual requirements.
* Chains to the next `.SYSTEM` file in the directory.
`DCLOCK.SETUP` is for use with [SETUP.SYSTEM](../../setup/README.md).

6
clocks/fujinet/Makefile
View File

@ -7,7 +7,8 @@ OUTDIR = ../../out
HEADERS = $(wildcard *.inc) $(wildcard ../../inc/*.inc)
TARGETS = \
$(OUTDIR)/fn.clock.system.SYS
$(OUTDIR)/fn.clock.system.SYS \
$(OUTDIR)/fn.clock.setup.SYS
LOG_SUCCESS=1
LOG_FAILURE=1
@ -35,6 +36,9 @@ clean:
$(OUTDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.BIN $(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<
ifdef XATTR

4
clocks/fujinet/README.md
View File

@ -4,6 +4,4 @@
This driver is an adaptation of the other drivers in https://github.com/a2stuff/prodos-drivers
`FN.CLOCK.SETUP` is for use with [SETUP.SYSTEM](../../setup/README.md).

7
clocks/jumbo/Makefile
View File

@ -12,9 +12,9 @@ HEADERS = $(wildcard *.inc) $(wildcard ../../inc/*.inc) \
../fujinet/smartport.inc \
../cricket/cricket.system.s
TARGETS = \
$(OUTDIR)/clock.system.SYS
$(OUTDIR)/clock.system.SYS \
$(OUTDIR)/clock.setup.SYS
LOG_SUCCESS=1
LOG_FAILURE=1
@ -42,6 +42,9 @@ clean:
$(OUTDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<
ifdef XATTR

2
clocks/jumbo/README.md
View File

@ -13,3 +13,5 @@ The drivers are (in order):
By default, the installer logs on success so you can tell what clock was detected, but you can build with `LOG_SUCCESS=0` to prevent that.
If ProDOS _already_ has a clock driver installed, the driver is checked for common Thunderclock year tables. If found, the table is updated in memory to cover 2023-2028.
`CLOCK.SETUP` is for use with [SETUP.SYSTEM](../../setup/README.md).

4
clocks/ns.clock/Makefile
View File

@ -9,6 +9,7 @@ HEADERS = $(wildcard *.inc) $(wildcard ../../inc/*.inc)
TARGETS = \
$(OUTDIR)/ns.clock.system.SYS \
$(OUTDIR)/ns.clock.setup.SYS \
$(UTILDIR)/set.datetime.BIN
LOG_SUCCESS=1
@ -39,6 +40,9 @@ clean:
$(OUTDIR)/%.o $(UTILDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<

2
clocks/ns.clock/README.md
View File

@ -12,3 +12,5 @@ Adapted from `NS.CLOCK.SYSTEM` (by "CAP"), with these changes:
These `BRUN`able files are also built:
* [SET.DATETIME](set.datetime.s) sets the No Slot Clock date/time.
`NS.CLOCK.SETUP` is for use with [SETUP.SYSTEM](../../setup/README.md).

6
clocks/romx/Makefile
View File

@ -7,7 +7,8 @@ OUTDIR = ../../out
HEADERS = $(wildcard *.inc) $(wildcard ../../inc/*.inc)
TARGETS = \
$(OUTDIR)/romxrtc.system.SYS
$(OUTDIR)/romxrtc.system.SYS \
$(OUTDIR)/romxrtc.setup.SYS
LOG_SUCCESS=1
LOG_FAILURE=1
@ -35,6 +36,9 @@ clean:
$(OUTDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<
ifdef XATTR

2
clocks/romx/README.md
View File

@ -1,3 +1,5 @@
# ROMX ProDOS Clock Driver
Original source c/o Jeff Mazur.
`ROMXRTC.SETUP` is for use with [SETUP.SYSTEM](../../setup/README.md).

3
inc/driver_postamble.inc
View File

@ -1,3 +1,6 @@
.ifndef BUILD_SETUP_FILE
poporg
reloc_end := *
.endif

26
inc/driver_preamble.inc
View File

@ -4,14 +4,17 @@
;; SYS files load at $2000; relocates self to $1000
.org SYS_ADDR
.ifndef BUILD_SETUP_FILE
dst_addr := $1000
;;; ------------------------------------------------------------
jmp relocate
.else
jmp main
.endif
.byte MM, DD, YY ; version date stamp
.ifndef BUILD_SETUP_FILE
;;; ------------------------------------------------------------
;;; Relocate this code from $2000 (.SYSTEM start location) to $1000
;;; and start executing there. This is done so that the next .SYSTEM
@ -389,6 +392,23 @@ suffix:
found_self_flag:
.byte 0
.else
;;; ============================================================
;;; Main routine
;;; ============================================================
.proc main
jsr maybe_install_driver
MLI_CALL QUIT, quit_params
brk ; crash if QUIT fails
DEFINE_QUIT_PARAMS quit_params
.endproc
.endif
;;; ============================================================
;;; Common Routines
;;; ============================================================

56
package.sh
View File

@ -11,39 +11,47 @@ VOLNAME="drivers"
rm -f "$IMGFILE"
cadius CREATEVOLUME "$IMGFILE" "$VOLNAME" 140KB --no-case-bits --quiet
cadius CREATEFOLDER "$IMGFILE" "/$VOLNAME/CRICKET.UTIL" --no-case-bits --quiet
cadius CREATEFOLDER "$IMGFILE" "/$VOLNAME/NSCLOCK.UTIL" --no-case-bits --quiet
cadius CREATEFOLDER "$IMGFILE" "/$VOLNAME/SETUPS" --no-case-bits --quiet
add_file () {
cp "$1" "$PACKDIR/$2"
cadius ADDFILE "$IMGFILE" "$3" "$PACKDIR/$2" --no-case-bits --quiet
}
add_file "out/cricket.system.SYS" "cricket.system#FF0000" "/$VOLNAME"
add_file "out/cricket.util/set.datetime.BIN" "set.datetime#062000" "/$VOLNAME/CRICKET.UTIL"
add_file "out/cricket.util/set.date.BIN" "set.date#062000" "/$VOLNAME/CRICKET.UTIL"
add_file "out/cricket.util/set.time.BIN" "set.time#062000" "/$VOLNAME/CRICKET.UTIL"
add_file "out/cricket.util/test.BIN" "test#062000" "/$VOLNAME/CRICKET.UTIL"
add_file "out/dclock.system.SYS" "dclock.system#FF0000" "/$VOLNAME"
add_file "out/ns.clock.system.SYS" "ns.clock.system#FF0000" "/$VOLNAME"
add_file "out/nsclock.util/set.datetime.BIN" "set.datetime#062000" "/$VOLNAME/NSCLOCK.UTIL"
add_file "out/romxrtc.system.SYS" "romxrtc.system#FF0000" "/$VOLNAME"
add_file "out/fn.clock.system.SYS" "fn.clock.system#FF0000" "/$VOLNAME"
add_file "out/clock.system.SYS" "clock.system#FF0000" "/$VOLNAME"
add_file "out/ram.drv.system.SYS" "ram.drv.system#FF0000" "/$VOLNAME"
add_file "out/bbb.system.SYS" "bbb.system#FF0000" "/$VOLNAME"
add_file "out/buhbye.system.SYS" "buhbye.system#FF0000" "/$VOLNAME"
add_file "out/bye.system.SYS" "bye.system#FF0000" "/$VOLNAME"
add_file "out/selector.system.SYS" "selector.system#FF0000" "/$VOLNAME"
add_file "out/zipchip.system.SYS" "zipchip.system#FF0000" "/$VOLNAME"
add_file "out/quit.system.SYS" "quit.system#FF0000" "/$VOLNAME"
add_file "out/pause.system.SYS" "pause.system#FF0000" "/$VOLNAME"
add_file "out/me.first.system.SYS" "me.first.system#FF0000" "/$VOLNAME"
add_file "out/date.BIN" "date#062000" "/$VOLNAME"
# Drivers
for file in \
"bbb" "buhbye" "bye" "selector" \
"clock" "cricket" "dclock" "fn.clock" "ns.clock" "romxrtc" \
"ram.drv" \
"zipchip" \
"me.first" "pause"; do
add_file "out/$file.system.SYS" "$file.system#FF0000" "/$VOLNAME"
add_file "out/$file.setup.SYS" "$file.setup#FF0000" "/$VOLNAME/SETUPS"
done
add_file "out/setup.system.SYS" "setup.system#FF0000" "/$VOLNAME"
add_file "out/quit.system.SYS" "quit.system#FF0000" "/$VOLNAME"
# Utilities
add_file "out/date.BIN" "date#062000" "/$VOLNAME"
cadius CREATEFOLDER "$IMGFILE" "/$VOLNAME/CRICKET.UTIL" --no-case-bits --quiet
add_file "out/cricket.util/set.datetime.BIN" "set.datetime#062000" "/$VOLNAME/CRICKET.UTIL"
add_file "out/cricket.util/set.date.BIN" "set.date#062000" "/$VOLNAME/CRICKET.UTIL"
add_file "out/cricket.util/set.time.BIN" "set.time#062000" "/$VOLNAME/CRICKET.UTIL"
add_file "out/cricket.util/test.BIN" "test#062000" "/$VOLNAME/CRICKET.UTIL"
cadius CREATEFOLDER "$IMGFILE" "/$VOLNAME/NSCLOCK.UTIL" --no-case-bits --quiet
add_file "out/nsclock.util/set.datetime.BIN" "set.datetime#062000" "/$VOLNAME/NSCLOCK.UTIL"
cadius CREATEFOLDER "$IMGFILE" "/$VOLNAME/TEXTCOLORS" --no-case-bits --quiet
cadius CREATEFOLDER "$IMGFILE" "/$VOLNAME/SETUPS/TEXTCOLORS" --no-case-bits --quiet
for file in a2green bw deepblue gray gsblue mint pink wb; do
add_file "out/${file}.system.SYS" "${file}.system#FF0000" "/$VOLNAME/TEXTCOLORS"
add_file "out/${file}.system.SYS" "${file}.system#FF0000" "/$VOLNAME/TEXTCOLORS"
add_file "out/${file}.setup.SYS" "${file}.setup#FF0000" "/$VOLNAME/TEXTCOLORS/SETUPS"
done
rm -r "$PACKDIR"

9
ram.drv/Makefile
View File

@ -7,7 +7,8 @@ OUTDIR = ../out
HEADERS = $(wildcard *.inc) $(wildcard ../inc/*.inc)
TARGETS = \
$(OUTDIR)/ram.drv.system.SYS
$(OUTDIR)/ram.drv.system.SYS \
$(OUTDIR)/ram.drv.setup.SYS
export LOG_SUCCESS=1
export LOG_FAILURE=1
@ -35,8 +36,8 @@ clean:
$(OUTDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<
ifdef XATTR
xattr -wx prodos.AuxType '00 20' $@
endif

3
ram.drv/ram.drv.system.s
View File

@ -38,7 +38,6 @@ zp_sig_addr := $06
zpproc_addr := $B0
zpproc_relay_addr := $2D0
data_buf := $1C00 ; I/O when chaining to next SYS file
driver_target := $FF00 ; Install location in ProDOS
@ -711,8 +710,6 @@ map2 := *+2+$80 ; len: $80
stash_00 := *+2+$100 ; len: $80
stash_01 := *+2+$180 ; len: $80
.assert stash_01+$80 < data_buf, error, "Too long"
;;; ************************************************************
.include "../inc/driver_postamble.inc"
;;; ************************************************************

12
selectors/Makefile
View File

@ -8,9 +8,13 @@ HEADERS = $(wildcard *.inc) $(wildcard ../inc/*.inc)
TARGETS = \
$(OUTDIR)/selector.system.SYS \
$(OUTDIR)/selector.setup.SYS \
$(OUTDIR)/bye.system.SYS \
$(OUTDIR)/bye.setup.SYS \
$(OUTDIR)/bbb.system.SYS \
$(OUTDIR)/buhbye.system.SYS
$(OUTDIR)/bbb.setup.SYS \
$(OUTDIR)/buhbye.system.SYS \
$(OUTDIR)/buhbye.setup.SYS
# For timestamps
MM = $(shell date "+%-m")
@ -34,8 +38,8 @@ clean:
$(OUTDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<
ifdef XATTR
xattr -wx prodos.AuxType '00 20' $@
endif

35
setup/Makefile Normal file
View File

@ -0,0 +1,35 @@
CAFLAGS = --target apple2enh --list-bytes 0
LDFLAGS = --config apple2-asm.cfg
OUTDIR = ../out
HEADERS = $(wildcard *.inc) $(wildcard ../inc/*.inc)
TARGETS = \
$(OUTDIR)/setup.system.SYS
# For timestamps
MM = $(shell date "+%-m")
DD = $(shell date "+%-d")
YY = $(shell date "+%-y")
DEFINES = -D DD=$(DD) -D MM=$(MM) -D YY=$(YY)
XATTR := $(shell command -v xattr 2> /dev/null)
.PHONY: clean all
all: $(OUTDIR) $(TARGETS)
$(OUTDIR):
mkdir -p $(OUTDIR)
clean:
rm -f $(OUTDIR)/*.o
rm -f $(OUTDIR)/*.list
rm -f $(TARGETS)
$(OUTDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<

30
setup/README.md Normal file
View File

@ -0,0 +1,30 @@
# SETUP.SYSTEM
The November 1987 edition of Call-A.P.P.L.E features an article by Sean Nolan, ["SYSTEM.SETUP - A Proposed Startup File Standard"](https://www.callapple.org/magazines-4/call-a-p-p-l-e/setup-system-a-proposed-startup-file-standard/). The article was reprinted in [Beneath Apple DOS ProDOS 2020](https://archive.org/details/beneath-apple-dos-prodos-2020). The proposal combines the ProDOS-8 notion of running the first .SYSTEM file found on disk and the convention of chaining to the next .SYSTEM file, with the ProDOS-16 notion of enumerating a directory of startup files. A main `SETUP.SYSTEM` file is provided which enumerates all files in a `SETUPS/` directory. These "setup files" are BIN or SYS files which work like standard ProDOS-8 drivers. The advantages of this approach are:
* The top level directory only needs one SYSTEM file plus `SETUPS/`, which reduces clutter.
* Each individual setup file is simpler than stand-alone SYSTEM files, as they don't need to implement chaining.
Which approach you use is a matter of taste.
## How do you use these?
If you choose this approach, use a tool like Copy II Plus or [Apple II DeskTop](https://github.com/a2stuff/a2d) to copy and arrange `SETUP.SYSTEM` as the first `.SYSTEM` file in your root directory. Create a `SETUPS/` directory, and copy the appropriate `.SETUPS` files there. A boot disk image catalog that is used on multiple different hardware configurations might include:
* `PRODOS` - the operating system, e.g. [ProDOS 2.4](https://prodos8.com/)
* `SETUP.SYSTEM` - install No-Slot clock driver, if present
* `QUIT.SYSTEM` - invoke the Quit handler immediately, as a program selector
* `BASIC.SYSTEM` - which will not be automatically invoked, but is available to manually invoke
* `SETUPS/NS.CLOCK.SYSTEM` - install No-Slot clock driver, if present
* `SETUPS/ROMXRTC.SYSTEM` - install ROMX clock driver, if present
* `SETUPS/FN.CLOCK.SYSTEM` - install FujiNet clock driver, if present
* `SETUPS/DCLOCK.SYSTEM` - install DClock clock driver, if present
* `SETUPS/CRICKET.SYSTEM` - install Cricket! clock driver, if present
* `SETUPS/ZIPCHIP.SYSTEM` - slow the ZIP CHIP on speaker access, if present
* `SETUPS/RAM.DRV.SYSTEM` - install RamWorks RAM disk driver, if present
* `SETUPS/BUHBYE.SYSTEM` - install a customized Quit handler to replace the built-in one
* `SETUPS/PAUSE.SYSTEM` - pause for a moment, so that you can inspect the output of the above
## Notes
The `SETUP.SYSTEM` program is not modified from the published version except that it no longer clears the screen between running each file in `SETUPS/`, so that any logged output remains visible.

329
setup/setup.system.s Normal file
View File

@ -0,0 +1,329 @@
;;;
;;; SETUP.SYSTEM by Sean Nolan
;;;
;;; A Proposed Startup File Standard
;;;
;;; Published in Call-APPLE, November, 1987
;;; This program is in the public domain.
;;;
;;; This program mimics the ProDOS 16
;;; SYSTEM.SETUP convention. It can be used
;;; to install RAM disk drivers, clock
;;; drivers, and IIGS Classic Desk
;;; Accessories on bootup under ProDOS 8.
;;;
;;; This program loads and calls all BINary
;;; and SYStem files in a subdirectory named
;;; SETUPS. It then looks for the second
;;; system program in the volume directory
;;; whose name ends in ".SYSTEM", and runs
;;; that.
;;;
;;;
;;; Original code clears the screen before/after each driver. Skip it.
NO_HOME = 1
.define ORG .org
.define DFB .byte
.define DA .addr
.define DS .res
.define ASC .byte
.define ASCH scrcode
.feature labels_without_colons +
.feature loose_string_term +
.include "apple2.mac"
.if 0
TYP $FF ;save as a system file
.endif
ORG $BD00 ;load at $2000, but run at $BD00
;;; ****************** equates
CH = $24
IN2 = $280
FILETYPE = IN2+16
AUXCODE = IN2+31
RESET = $3F2
IOBUFFER = $B900
PRODOS = $BF00
QUITVECT = $BF03
DEVNUM = $BF30
BITMAP = $BF58
INIT = $FB2F
VTABZ = $FC24
HOME = $FC58
RDKEY = $FD0C
SETVID = $FE93
SETKBD = $FE89
SETNORM = $FE84
;;; ****************** boot code
VOLNAME = * ;The first 17 bytes are overwritten with the
;name of the volume from which this was run.
LDX #1 ;mark page $BD as free in the system bitmap
STX BITMAP+23 ;so we can put Online result in our code.
DEX ;relocate this program to $BD00-BEFF
LOOP1 LDA $2000,X
STA $BD00,X
LDA $2100,X
STA $BE00,X
INX
BNE LOOP1
DEX
TXS ;init stack pointer
JMP ENTER ;jump to relocated code
DIRNAME DFB 6 ;DirName and VolName must be in the same page
ASCH "SETUPS"
;;; ****** Get name of boot volume
ENTER LDA DEVNUM ;get name of last volume accessed
STA ONLINEN
JSR PRODOS
DFB $C5 ;ONLINE
DA ONLINEP
LDA VOLNAME+1 ;insert a slash nefore the name
AND #$0F
TAX
INX
STX VOLNAME
LDA #$2F ;/
STA VOLNAME+1
LDA QUITVECT+1 ;save original quit vector
STA QUITMOD1+1
LDA QUITVECT+2
STA QUITMOD2+1
;;; ****** Clean up before &amp; after calling files
MAINLOOP LDX #2 ;point Reset vector and ProDOS
LOOP3 LDA JUMP+1,X ;Quit vectors to MainLoop
STA RESET,X
LDA JUMP,X
STA QUITVECT,X
DEX
BPL LOOP3
TXS ;fix stack pointer (X=$FF)
JSR CLOSE ;close all open files
LDX #23 ;clear system bit map
LDA #0
LOOP2 STA BITMAP,X
DEX
BPL LOOP2
LDA #$CF ;mark pages 0,1,4-7 as used
STA BITMAP
LDA #%111 ;mark pages $BD-$BF as used
STA BITMAP+23
LDA $C082 ;Language card off
STA $C00C ;40-column
STA $C00E ;normal character set
STA $C000 ;80STORE off
JSR SETNORM ;normal
JSR INIT ;display text page 1
JSR SETVID ;PR#0
JSR SETKBD ;IN#0
;;; Make sure boot volume is around
;;; AND set prefix to the boot volume
.if NO_HOME
VOLMOUNT
.else
VOLMOUNT JSR HOME
.endif
JSR PRODOS ;set prefix to volume
DFB $C6 ;SET PREFIX
DA PFX2P
BCC VOLOK
LDX #13
LOOP6 LDA VOLTEXT-1,X ;print message "insert volume"
STA $5A8+4,X
DEX
BNE LOOP6
LOOP7 LDA VOLNAME+1,X ;print volume name
ORA #$80
STA $5A8+19,X
INX
CPX VOLNAME
BCC LOOP7
LDA #35 ;go to CH=35, CV=11
STA CH
LDA #11
JSR VTABZ
JSR RDKEY ;wait for keypress
JMP VOLMOUNT
;;; ****** Get name of next file at IN2
VOLOK JSR NEXTFILE ;get name of next file at IN2
BCS EXITLOOP ;if error, we're done with setup files
;;; ****** Load and call setup file
JSR PRODOS ;set prefix to SETUPS
DFB $C6 ;SET PREFIX
DA PFX1P
JSR READFILE ;read in file whose name is at IN@
;and call it if there was no error.
JUMP JMP MAINLOOP ;3 bytes here copied into ProDOS quit vector
DFB $BD^$A5 ;3 bytes here are copied into reset vector
EXITLOOP INC RESET+2 ;scramble reset vector
QUITMOD1 LDA #0 ;restore original quit vector
STA QUITVECT+1
QUITMOD2 LDA #0
STA QUITVECT+2
;;; ****** Look for second system program on disk
LDA #0 ;modify NextFile routine so that it searches
STA NUMBER+1 ;the volume directory for system files only.
STA CHEKTYPE+1
LDA #<VOLNAME ;NamePtr+1 does not bneed to be changed
STA NAMEPTR ;since VolName and DirName are in the same page
NEXTSYS JSR NEXTFILE
BCS QUIT
LDX IN2 ;see if file ends with ".SYSTEM"
LDY #6
LOOP4 LDA IN2,X ;I expect pathname at IN2 in low ASCII
CMP SYSTEXT,Y
BNE NEXTSYS
DEX
DEY
BPL LOOP4
INC MOD+1
MOD LDA #$FF ;the first .SYSTEM program we find is this
BEQ NEXTSYS ;one, so skip it and look for next one.
JSR READFILE ;if successful, never come back
QUIT JSR PRODOS
DFB $65 ;QUIT
DA QUITP
SYSTEXT ASC '.SYSTEM'
;;; Get name of next system file or binary file
;;;
;;; This routine is set up to look for both SYSTEM and
;;; BINary files in the SETUPs subdirectory. It is later
;;; modified to search for SYSTEM files only in the
;;; volume directory. The locations which are changed
;;; are ChekType+1, Number+1, and NamePtr (in the Open
;;; parametr list)
;;;
;;; Returns carry if not found, clear if found.
NEXTFILE JSR PRODOS
DFB $C8 ;OPEN
DA OPENP
BCS CLOSE
LDA OPENN
STA MARKN
STA READN
JSR PRODOS ;Read in first 39 bytes of directory to
DFB $CA ;IN2. This gets the number of entries per
DA READP ;block and number of bytes per entry.
BCS CLOSE
LDA IN2+35 ;save number of bytes per directory entry
STA ENTSIZE+1
LDA IN2+36 ;save number of entries per directory block
STA ENTRIES+1
NEXTENT INC NUMBER+1
NUMBER LDA #0 ;self-modified operand
;;; Retrieve catalog entry #A
LDX #$FE ;build page index in X
LOOP5 INX
INX
ENTRIES CMP #13
BCC OK
SBC ENTRIES+1
BCS LOOP5 ;always
OK TAY
LDA #4 ;1st entry per directory block starts 4 bytes in
LOOP10 DEY
BMI OK2
CLC
ENTSIZE ADC #39 ;add size of directory entry
BCC LOOP10
INX
BNE LOOP10 ;always
OK2 STA MARK ;save mark in file
STX MARK+1
JSR PRODOS ;set the mark
DFB $CE ;SET_MARK
DA MARKP
BCS CLOSE
JSR PRODOS ;read in directory info
DFB $CA ;READ
DA READP
BCS CLOSE
LDA IN2 ;make sure that file is not deleted
BEQ NEXTENT
AND #$0F
STA IN2
LDA FILETYPE ;make sure file type is correct
EOR #$FF ;we look for system programs...
BEQ CLOSE
CHEKTYPE EOR 6^$FF ;...and binary ones.
BNE NEXTENT
CLOSE PHP ;close all files - do not change carry
JSR PRODOS
DFB $CC ;CLOSE
DA CLOSEP
PLP
ANRTS RTS
;;; Read file and call it.
;;; Name should be found at IN2
;;; Prefix must be set.
READFILE LDX FILETYPE ;if a system program, set to read to $2000
LDA #$20
INX
BEQ SETDEST
LDX AUXCODE ;else, set to read in file at address
LDA AUXCODE+1 ;found in auxcode
SETDEST STX READ2D
STA READ2D+1
JSR PRODOS ;Open file
DFB $C8 ;OPEN
DA OPEN2P
BCS CLOSE
LDA OPEN2N
STA READ2N
JSR PRODOS ;Read file into memory
DFB $CA ;READ
DA READ2P
JSR CLOSE
BCS ANRTS
JMP (READ2D) ;call the file just loaded
;;; ****** ProDOS MLI parameter lists
ONLINEP DFB 2 ;Online parameter list
ONLINEN DS 1
DA VOLNAME+1
;;;
PFX1P DFB 1 ;to set prefix to SETUP
DA DIRNAME
;;;
PFX2P DFB 1 ;to set prefix to volume directory
DA VOLNAME
;;;
QUITP DFB 4,0,0,0,0,0,0
;;;
CLOSEP DFB 1,0 ;close all files
;;;
OPENP DFB 3 ;open directory
NAMEPTR DA DIRNAME ;pathname pointer
DA IOBUFFER
OPENN DS 1 ;reference number
;;;
MARKP DFB 2 ;set mark in directory
MARKN DS 1
MARK DS 3
;;;
READP DFB 4 ;read directory
READN DS 1
DA IN2 ;target address
DA 39 ;length
DS 2
;;;
OPEN2P DFB 3 ;open setup or system file
DA IN2
DA IOBUFFER
OPEN2N DS 1
;;;
READ2P DFB 4 ;read setup or system file
READ2N DS 1
READ2D DS 2 ;destination of file is self-mod here
DA $B900-$800 ;ask for largest possible that will fit
DS 2
;;;
VOLTEXT ASCH "INSERT VOLUME"
.if 0
CHK ;checksum - eor for all previous bytes
.else
.byte $E8
.endif

17
textcolors/Makefile
View File

@ -8,13 +8,22 @@ HEADERS = $(wildcard *.inc) $(wildcard ../inc/*.inc)
TARGETS = \
$(OUTDIR)/a2green.system.SYS \
$(OUTDIR)/a2green.setup.SYS \
$(OUTDIR)/bw.system.SYS \
$(OUTDIR)/bw.setup.SYS \
$(OUTDIR)/deepblue.system.SYS \
$(OUTDIR)/deepblue.setup.SYS \
$(OUTDIR)/gray.system.SYS \
$(OUTDIR)/gray.setup.SYS \
$(OUTDIR)/gsblue.system.SYS \
$(OUTDIR)/gsblue.setup.SYS \
$(OUTDIR)/mint.system.SYS \
$(OUTDIR)/mint.setup.SYS \
$(OUTDIR)/pink.system.SYS \
$(OUTDIR)/wb.system.SYS
$(OUTDIR)/pink.setup.SYS \
$(OUTDIR)/wb.system.SYS \
$(OUTDIR)/wb.setup.SYS
# For timestamps
MM = $(shell date "+%-m")
DD = $(shell date "+%-d")
@ -37,8 +46,8 @@ clean:
$(OUTDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.BIN $(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<
ifdef XATTR
xattr -wx prodos.AuxType '00 20' $@
endif

5
util/Makefile
View File

@ -9,7 +9,9 @@ HEADERS = $(wildcard *.inc) $(wildcard ../inc/*.inc)
TARGETS = \
$(OUTDIR)/quit.system.SYS \
$(OUTDIR)/pause.system.SYS \
$(OUTDIR)/pause.setup.SYS \
$(OUTDIR)/me.first.system.SYS \
$(OUTDIR)/me.first.setup.SYS \
$(OUTDIR)/date.BIN
# For timestamps
@ -34,6 +36,9 @@ clean:
$(OUTDIR)/%.o: %.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.setup.o: %.system.s $(HEADERS)
ca65 $(CAFLAGS) $(DEFINES) -D BUILD_SETUP_FILE --listing $(basename $@).list -o $@ $<
$(OUTDIR)/%.BIN $(OUTDIR)/%.SYS: $(OUTDIR)/%.o
ld65 $(LDFLAGS) -o $@ $<
ifdef XATTR