In MAME, for the SSC in Slot 2, the STATUS flag never comes back with
ready-to-send, so the probe would hang. Introduce a timer, same as on
the receiving side, and timeout instead of hanging.
Similar to 14e72b7384
The change in b182a53d made resetting/detecting The Cricket! fail on
my Laser 128EX, likely due to startup config of the SSC not being
the same as on an Apple //c. This should be a superset of the change,
but compat testing will be needed.
* The Cricket!: fix hang on Total Replay
The Cricket reset command sends Total Replay into an endless loop when launched, presumably because of an interrupt situation (TR just does RTI on an interrupt). Toggling the COMMAND and CONTROL settings seems to allow TR to function properly, while also allowing the Cricket initialization code to silence any playing notes.
* The Cricket!: Reset Cricket before probing
Finds the Cricket every single time this way. Occasionally the driver would miss finding it due to it being in a wait state. Sending a reset first fixes that.
* The Cricket!: make sure registers are toggled for TR
This stops any active music playback, which is handy if you did a warm
boot in the middle of playback, and your The Cricket! is stuck playing
the same note constantly but you don't want to power-cycle the device
which will unset the RTC.
c/o @frankmilliron
... and don't bother saving/restoring registers during install,
as this will only follow a boot or OS restart.
Suggested by @frankmilliron
Also inhibit interrupts in the SET.XXX utilities for good measure.
This one driver pulls in the installers for each other clock driver,
and invokes each in turn:
* No-Slot Clock
* ROMX
* FujiNet
* DClock
* Cricket!
This requires adding `.ifndef JUMBO` guards in the other drivers for
when they pull in include files (symbols, macros, etc). The other
drivers are adjusted to return with carry clear on successful install,
failure otherwise.
