Apple-2-SW/prodos-path
1
0
Fork 0
mirror of https://github.com/a2stuff/prodos-path.git synced 2024-12-26 22:30:54 +00:00
Code Issues Projects Releases Wiki Activity

wip

Browse Source
This commit is contained in:
Joshua Bell 2019-01-06 17:23:56 -08:00
parent 5590f2ff16
commit 42dc31e40e
4 changed files with 129 additions and 176 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
Makefile
View File

@ -5,7 +5,7 @@ CCFLAGS = --config apple2-asm.cfg
OUTDIR = out
TARGETS = $(OUTDIR)/chtype.BIN
TARGETS = $(OUTDIR)/path.BIN
.PHONY: clean all
all: $(OUTDIR) $(TARGETS)
@ -27,3 +27,6 @@ $(OUTDIR)/%.o: %.s $(HEADERS)
$(OUTDIR)/%.BIN $(OUTDIR)/%.SYS: $(OUTDIR)/%.o
$(CC65)/ld65 $(CCFLAGS) -o $@ $<
xattr -wx prodos.AuxType '00 20' $@
$(OUTDIR)/%.CMD: $(OUTDIR)/%.o
$(CC65)/ld65 $(CCFLAGS) -o $@ $<

32
README.md
View File

@ -1,30 +1,28 @@
# chtype - change file type command for ProDOS
# path - CMD executable path command for ProDOS
Build with [ca65](https://cc65.github.io/doc/ca65.html)
Installation:
* Copy target to ProDOS disk
* From BASIC.SYSTEM prompt, run: `-CHTYPE` from STARTUP (or by hand)
* From BASIC.SYSTEM prompt, run: `-PATH` from STARTUP (or by hand)
Usage:
```
CHTYPE pathname[,Ttype][,Aauxtype][,S#][,D#]
PATH - view current search path
PATH prefix - set search path
```
Examples:
* `CHTYPE` - show current type/auxtype
* `CHTYPE pic,T$08` - set just type
* `CHTYPE file,A$0640` - set just auxtype
* `CHTYPE now_basic,TBAS,A$801` - set both type and auxtype
* `CHTYPE /root/was_bin,TSYS` - works with absolute paths
* `CHTYPE as_text,TTXT,S6,D1` - can use slot/drive arguments too
Once set, binary files of type `CMD` in the specified directory can be invoked by name. The command line will be present at $200 (GETLN input buffer).
Example:
```
] -/hd/path - install it
] PATH /hd/cmds - set PATH
] PATH - verify path
/hd/cmds
] BELL - will invoke /hd/cmds/BELL if present
```
Notes:
* Allocates a 1 page buffer to store the code
* Relative or absolute paths can be used
* Can be invoked as lower case (e.g. `chtype ...`)
Resources:
* [File Types Table](http://www.easy68k.com/paulrsm/6502/PDOS8TRM.HTM#B-1T) - [ProDOS 8 Technical Reference Manual](http://www.easy68k.com/paulrsm/6502/PDOS8TRM.HTM)
* [File Types](https://www.kreativekorp.com/miscpages/a2info/filetypes.shtml) - [Jon Relay's Apple II Info Archives](https://www.kreativekorp.com/miscpages/a2info/)
* [ProDOS File Types 2.0](https://macgui.com/kb/article/116) - [Mac GUI](https://macgui.com)
* Can be invoked as lower case (e.g. `path ...`)

215
path.s
View File

@ -1,17 +1,6 @@
;;; ============================================================
;;;
;;; CHTYPE - File type changing command for ProDOS-8
;;;
;;; Install:
;;; -CHTYPE (from BASIC.SYSTEM prompt)
;;; Usage:
;;; CHTYPE filename[,Ttype][,Aaux][,S#][,D#]
;;;
;;; * filename can be relative or absolute path
;;; * specify T$nn to set file type
;;; * specify A$nnnn to set aux type info
;;; * type can be BIN, SYS, TXT (etc) or $nn
;;; * with neither T nor A option, prints current values
;;; PATH
;;;
;;; Build with: ca65 - https://cc65.github.io/doc/ca65.html
;;;
@ -19,6 +8,8 @@
.org $2000
.include "prodos.inc"
;;; ============================================================
INBUF := $200 ; GETLN input buffer
@ -27,69 +18,8 @@ INBUF := $200 ; GETLN input buffer
;;; Monitor ROM routines
CROUT := $FD8E
PRBYTE := $FDDA
COUT := $FDED
;;; ============================================================
;;; ProDOS MLI / Global Page
SET_FILE_INFO = $C3
GET_FILE_INFO = $C4
DATE := $BF90
;;; ============================================================
;;; BASIC.SYSTEM Global Page
EXTRNCMD := $BE06 ; External command jmp vector
ERROUT := $BE09 ; Error routine jmp vector
XTRNADDR := $BE50 ; Ext cmd implementation addr
XLEN := $BE52 ; Length of command string minus 1
XCNUM := $BE53 ; Command number (ext cmd = 0).
PBITS := $BE54 ; Command parameter bits
FBITS := $BE56 ; Found parameter bits
.enum PBitsFlags
;; PBITS
PFIX = $80 ; Prefix needs fetching
SLOT = $40 ; No parameters to be processed
RRUN = $20 ; Command only valid during program
FNOPT = $10 ; Filename is optional
CRFLG = $08 ; CREATE allowed
T = $04 ; File type
FN2 = $02 ; Filename '2' for RENAME
FN1 = $01 ; Filename expected
;; PBITS+1
AD = $80 ; Address
B = $40 ; Byte
E = $20 ; End address
L = $10 ; Length
LINE = $08 ; '@' line number
SD = $04 ; Slot and drive numbers
F = $02 ; Field
R = $01 ; Record
;; Setting SD in PBITS+1 enables desired automatic behavior: if
;; a relative path is given, an appropriate prefix is computed,
;; using S# and D# options if supplied. Without this, absolute
;; paths must be used if no prefix is set.
.endenum
VADDR := $BE58 ; Address parameter
VSLOT := $BE61 ; Slot parameter
VTYPE := $BE6A ; Type parameter
VPATH1 := $BE6C ; Pathname buffer
GOSYSTEM := $BE70 ; Use instead of MLI
SSGINFO := $BEB4 ; Get/Set Info Parameter block
FIFILID := $BEB8 ; (set size to set=7 or get=$A)
FIAUXID := $BEB9
FIMDATE := $BEBE
GETBUFR := $BEF5
;;; ============================================================
;; Save previous external command address
@ -107,9 +37,11 @@ GETBUFR := $BEF5
:
;; A = MSB of new page - update absolute addresses
;; (aligned to page boundary so only MSB changes)
sta page_num1
sta page_num2
sta page_num3
ldx relocation_table
: ldy relocation_table+1,x
sta handler,y
dex
bpl :-
;; Install new address in external command address
sta EXTRNCMD+2
@ -150,7 +82,7 @@ nxtchr: lda INBUF,x
page_num1 := *+2 ; address needing updating
: cmp command_string,x
bne not_ours
bne not_path
inx
cpx #command_length
bne nxtchr
@ -170,12 +102,12 @@ nxtchr: lda INBUF,x
lda #0
sta XCNUM
;; Set accepted parameter flags (Name, Type, Address)
;; Set accepted parameter flags (Name, Slot/Drive)
lda #PBitsFlags::T | PBitsFlags::FN1 ; Filename and Type
lda #PBitsFlags::FN1 ; Filename
sta PBITS
lda #PBitsFlags::AD | PBitsFlags::SD ; Address, Slot & Drive handling
lda #PBitsFlags::SD ; Slot & Drive handling
sta PBITS+1
clc ; Success (so far)
@ -183,6 +115,10 @@ nxtchr: lda INBUF,x
;;; ============================================================
not_path:
;;; ============================================================
not_ours:
sec ; Signal failure...
next_command := *+1
@ -195,89 +131,43 @@ execute:
lda FBITS
and #PBitsFlags::FN1 ; Filename?
bne :+
lda #$10 ; SYNTAX ERROR
sec
rts1: rts
:
bne set_path
;;; --------------------------------------------------
;; Show current path
;; Get the existing file info
lda #$A
sta SSGINFO
lda #GET_FILE_INFO
jsr GOSYSTEM
bcs rts1
;;; --------------------------------------------------
;; Apply options
ldy #0 ; count number of options
;; Apply optional Type argument as new file type
lda FBITS
and #PBitsFlags::T ; Type set?
beq :+
iny
lda VTYPE
sta FIFILID
:
;; Apply optional Address argument as new aux type
lda FBITS+1
and #PBitsFlags::AD ; Address set?
beq :+
iny
lda VADDR
sta FIAUXID
lda VADDR+1
sta FIAUXID+1
:
;; If no options were used, show current details instead.
cpy #0
beq show
;; Apply current date/time
ldx #3
: lda DATE,x
sta FIMDATE,x
dex
ldx #0
page_num3 := *+2
: cpx path_buffer
beq done
page_num4 := *+2
lda path_buffer+1,x
ora #$80
jsr COUT
inx
bpl :-
;; Set new file info
lda #$7
sta SSGINFO
lda #SET_FILE_INFO
jmp GOSYSTEM
jsr CROUT
done: clc
rts
;;; --------------------------------------------------
;; Set path
set_path:
ptr := $06
lda VPATH1
sta ptr
ldx VPATH1+1
sta ptr+1
show:
lda #'T'|$80
jsr COUT
lda #'='|$80
jsr COUT
lda #'$'|$80
jsr COUT
lda VTYPE
jsr PRBYTE
jsr CROUT
lda #'A'|$80
jsr COUT
lda #'='|$80
jsr COUT
lda #'$'|$80
jsr COUT
lda VADDR+1
jsr PRBYTE
lda VADDR
jsr PRBYTE
jsr CROUT
ldy #0
lda (ptr),y
tay
: lda (ptr),y
page_num5 := *+2
sta path_buffer,y
dey
bpl :-
clc
rts
@ -285,11 +175,20 @@ show:
;;; Data
command_string:
.byte "CHTYPE" ; Command string
.byte "PATH" ; Command string
command_length = *-command_string
path_buffer:
.res 65, 0
.endproc
.assert .sizeof(handler) <= $100, error, "Must fit on one page"
page_num1 := handler::page_num1
page_num2 := handler::page_num2
next_command := handler::next_command
relocation_table:
.byte 5
.byte <handler::page_num1
.byte <handler::page_num2
.byte <handler::page_num3
.byte <handler::page_num4
.byte <handler::page_num5

53
prodos.inc Normal file
View File

@ -0,0 +1,53 @@
;;; ============================================================
;;; ProDOS MLI / Global Page
GET_FILE_INFO = $C4
;;; ============================================================
;;; BASIC.SYSTEM Global Page
EXTRNCMD := $BE06 ; External command jmp vector
ERROUT := $BE09 ; Error routine jmp vector
XTRNADDR := $BE50 ; Ext cmd implementation addr
XLEN := $BE52 ; Length of command string minus 1
XCNUM := $BE53 ; Command number (ext cmd = 0).
PBITS := $BE54 ; Command parameter bits
FBITS := $BE56 ; Found parameter bits
.enum PBitsFlags
;; PBITS
PFIX = $80 ; Prefix needs fetching
SLOT = $40 ; No parameters to be processed
RRUN = $20 ; Command only valid during program
FNOPT = $10 ; Filename is optional
CRFLG = $08 ; CREATE allowed
T = $04 ; File type
FN2 = $02 ; Filename '2' for RENAME
FN1 = $01 ; Filename expected
;; PBITS+1
AD = $80 ; Address
B = $40 ; Byte
E = $20 ; End address
L = $10 ; Length
LINE = $08 ; '@' line number
SD = $04 ; Slot and drive numbers
F = $02 ; Field
R = $01 ; Record
;; Setting SD in PBITS+1 enables desired automatic behavior: if
;; a relative path is given, an appropriate prefix is computed,
;; using S# and D# options if supplied. Without this, absolute
;; paths must be used if no prefix is set.
.endenum
VPATH1 := $BE6C ; Pathname buffer
GOSYSTEM := $BE70 ; Use instead of MLI
SSGINFO := $BEB4 ; Get Info Parameter block
FIFILID := $BEB8 ; (set size $A)
GETBUFR := $BEF5