cx16: added bmx library module and showbmx example

compiler/res/prog8lib/cx16/bmx.p8

@@ -0,0 +1,337 @@
+; Routines to load and save "BMX" files (commander X16 bitmap format) Version 1.
+; Only uncompressed images are supported for now.
+; BMX Specification: https://cx16forum.com/forum/viewtopic.php?t=6945
+; TODO: make read_palette() and write_palette() use a palette_buffer_ptr to store palette into system ram instead of directly into vram.
+
+%import diskio
+
+bmx {
+
+    ubyte[32] header
+    str FILEID = petscii:"bmx"
+
+    ubyte bitsperpixel          ; consider using set_bpp() when setting this
+    ubyte vera_colordepth       ; consider using set_vera_colordepth() when setting this
+    uword width
+    uword height
+    ubyte border
+    ubyte palette_entries       ; 0 means 256, all of them
+    ubyte palette_start
+    ubyte compression
+
+    uword error_message         ; pointer to error message, or 0 if all ok
+    uword max_width = 0         ; should you want load() to check for this
+    uword max_height = 0        ; should you want load() to check for this
+
+    sub load(ubyte drivenumber, str filename, ubyte vbank, uword vaddr, uword screen_width) -> bool {
+        ; Loads a BMX bitmap image and palette into vram. (and Header info into the bmx.* variables)
+        ; Parameters:
+        ; the drive number and filename to load,
+        ; the vram bank and address where the bitmap data should go,
+        ; and the width of the current screen mode (can be 0 if you know no padding is needed).
+        ; You can set the max_width and max_height variables first, if you want this routine to check those.
+        ; Note: does not change vera screen mode or colordepth! You have to do that yourself!
+        ; Returns: success status. If false, error_message points to the error message string.
+        error_message = 0
+        ubyte old_drivenumber = diskio.drivenumber
+        diskio.drivenumber = drivenumber
+        if diskio.f_open(filename) {
+            diskio.reset_read_channel()
+            if read_header() {
+                if parse_header() {
+                    if max_width and width>max_width {
+                        error_message = "image too large"
+                        goto load_end
+                    }
+                    if screen_width and width>screen_width {
+                        error_message = "image too large"
+                        goto load_end
+                    }
+                    if max_height and height>max_height {
+                        error_message = "image too large"
+                        goto load_end
+                    }
+                    if compression {
+                        error_message = "compression not supported"
+                        goto load_end
+                    }
+                    if read_palette() {
+                        if not read_bitmap(vbank, vaddr, screen_width)
+                            error_message = "bitmap error"
+                    } else
+                        error_message = "palette error"
+                } else
+                    error_message = "invalid bmx file"
+            } else
+                error_message = "invalid bmx file"
+        } else
+            error_message = diskio.status()
+
+load_end:
+        diskio.f_close()
+        diskio.drivenumber = old_drivenumber
+        return error_message==0
+    }
+
+    sub load_header(ubyte drivenumber, str filename) -> bool {
+        ; Loads just the header data from a BMX bitmap image into the bmx.* variables.
+        ; Parameters: the drive number and filename to load.
+        ; Returns: success status. If false, error_message points to the error message string.
+        error_message = 0
+        ubyte old_drivenumber = diskio.drivenumber
+        diskio.drivenumber = drivenumber
+        if diskio.f_open(filename) {
+            diskio.reset_read_channel()
+            if read_header() {
+                if not parse_header()
+                    error_message = "invalid bmx file"
+            } else
+                error_message = "invalid bmx file"
+        } else
+            error_message = diskio.status()
+
+load_end:
+        diskio.f_close()
+        diskio.drivenumber = old_drivenumber
+        return error_message==0
+    }
+
+    sub load_palette(ubyte drivenumber, str filename) -> bool {
+        ; Loads just the palette from a BMX bitmap image into vram. (and Header info into the bmx.* variables)
+        ; Parameters: the drive number and filename to load.
+        ; Returns: success status. If false, error_message points to the error message string.
+        error_message = 0
+        ubyte old_drivenumber = diskio.drivenumber
+        diskio.drivenumber = drivenumber
+        if diskio.f_open(filename) {
+            diskio.reset_read_channel()
+            if read_header() {
+                if parse_header() {
+                    if not read_palette()
+                        error_message = "palette error"
+                } else
+                    error_message = "invalid bmx file"
+            } else
+                error_message = "invalid bmx file"
+        } else
+            error_message = diskio.status()
+
+load_end:
+        diskio.f_close()
+        diskio.drivenumber = old_drivenumber
+        return error_message==0
+    }
+
+    sub save(ubyte drivenumber, str filename, ubyte vbank, uword vaddr, uword screen_width) -> bool {
+        ; Save bitmap and palette data from vram into a BMX file.
+        ; First you must have set all bmx.* variables to the correct values! (like width, height..)
+        ; Parameters:
+        ; drive number and filename to save to,
+        ; vram bank and address of the bitmap data to save,
+        ; and the width of the current screen mode (or 0 if you know no padding is needed).
+        ; Returns: success status. If false, error_message points to the error message string.
+        if compression {
+            error_message = "compression not supported"
+            return false
+        }
+        error_message = 0
+        ubyte old_drivenumber = diskio.drivenumber
+        diskio.drivenumber = drivenumber
+        if diskio.f_open_w(filename) {
+            cx16.r0 = diskio.status()
+            if cx16.r0[0]!='0' {
+                error_message = cx16.r0
+                goto save_end
+            }
+            diskio.reset_write_channel()
+            if screen_width
+                width = min(width, screen_width)
+            if write_header() {
+                if write_palette() {
+                    if not write_bitmap(vbank, vaddr, screen_width)
+                        error_message = "bitmap error"
+                } else
+                    error_message = "palette error"
+            } else
+                error_message = "header error"
+        } else
+             error_message = diskio.status()
+save_end:
+        diskio.f_close_w()
+        diskio.drivenumber = old_drivenumber
+        return error_message==0
+    }
+
+    sub set_bpp(ubyte bpp) {
+        bitsperpixel = bpp
+        vera_colordepth = 0
+        when bpp {
+            2 -> vera_colordepth = 1
+            4 -> vera_colordepth = 2
+            8 -> vera_colordepth = 3
+        }
+    }
+
+    sub set_vera_colordepth(ubyte depth) {
+        vera_colordepth = depth
+        bitsperpixel = 1 << depth
+    }
+
+; ------------------- helper routines, usually not needed to call yourself -------------------------
+
+    sub read_header() -> bool {
+        ; load a BMX header from the currently active input file
+        for cx16.r0L in 0 to sizeof(header)-1 {
+            header[cx16.r0L] = cbm.CHRIN()
+        }
+        return not cbm.READST()
+    }
+
+    sub read_palette() -> bool {
+        ; load palette data from the currently active input file
+        cx16.vaddr(1, $fa00+palette_start*2, 0, 1)
+        cx16.r0L = palette_entries
+        do {
+            cx16.VERA_DATA0 = cbm.CHRIN()
+            cx16.VERA_DATA0 = cbm.CHRIN()
+            cx16.r0L--
+        } until cx16.r0L==0
+        return not cbm.READST()
+    }
+
+    sub read_bitmap(ubyte vbank, uword vaddr, uword screenwidth) -> bool {
+        ; load contiguous bitmap into vram from the currently active input file
+        cx16.vaddr(vbank, vaddr, 0, 1)
+        cx16.r1 = bytes_per_scanline(width)
+        cx16.r2 = 0
+        if width<screenwidth
+            cx16.r2 = bytes_per_scanline(screenwidth-width)     ; padding per scanline
+        repeat height {
+            read_scanline(cx16.r1)
+            repeat cx16.r2
+                cx16.VERA_DATA0 = 0     ; pad out if image width < screen width
+        }
+        return cbm.READST()==0 or cbm.READST()&$40    ; eof?
+
+        sub read_scanline(uword size) {
+            while size {
+                cx16.r0 = cx16.MACPTR(min(255, size) as ubyte, &cx16.VERA_DATA0, true)
+                if_cs {
+                    ; no MACPTR support
+                    repeat size
+                        cx16.VERA_DATA0 = cbm.CHRIN()
+                    return
+                }
+                size -= cx16.r0
+            }
+            return
+        }
+    }
+
+    sub write_header() -> bool {
+        ; save out the BMX header to the currently active output file
+        build_header()
+        for cx16.r0L in 0 to sizeof(header)-1 {
+            cbm.CHROUT(header[cx16.r0L])
+        }
+        return not cbm.READST()
+    }
+
+    sub write_palette() -> bool {
+        ; save full palette straight out of vram to the currently active output file
+        cx16.vaddr(1, $fa00+palette_start*2, 0, 1)
+        cx16.r0L = palette_entries
+        do {
+            cbm.CHROUT(cx16.VERA_DATA0)
+            cbm.CHROUT(cx16.VERA_DATA0)
+            cx16.r0L--
+        } until cx16.r0L==0
+        return not cbm.READST()
+    }
+
+    sub write_bitmap(ubyte vbank, uword vaddr, uword screenwidth) -> bool {
+        ; save contiguous bitmap from vram to the currently active output file
+        cx16.vaddr(vbank, vaddr, 0, 1)
+        cx16.r1 = bytes_per_scanline(width)
+        cx16.r2 = 0
+        if width<screenwidth
+            cx16.r2 = bytes_per_scanline(screenwidth-width)     ; padding per scanline
+        repeat height {
+            write_scanline(cx16.r1)
+            repeat cx16.r2 {
+                %asm {{
+                    lda  cx16.VERA_DATA0        ; just read away padding bytes
+                }}
+            }
+        }
+        return not cbm.READST()
+
+        sub write_scanline(uword size) {
+            while size {
+                cx16.r0L = lsb(size)
+                if msb(size)
+                    cx16.r0L = 0        ; 256 bytes
+                cx16.r0 = cx16.MCIOUT(cx16.r0L, &cx16.VERA_DATA0, true)
+                if_cs {
+                    ; no MCIOUT support
+                    repeat size
+                        cbm.CHROUT(cx16.VERA_DATA0)
+                    return
+                }
+                size -= cx16.r0
+            }
+        }
+    }
+
+    sub bytes_per_scanline(uword w) -> uword {
+        when bitsperpixel {
+            1 -> cx16.r0L = 3
+            2 -> cx16.r0L = 2
+            4 -> cx16.r0L = 1
+            8 -> return w
+            else -> return 0
+        }
+        return w >> cx16.r0L
+    }
+
+    sub parse_header() -> bool {
+        if header[0]==FILEID[0] and header[1]==FILEID[1] and header[2]==FILEID[2] {
+            if header[3]==1 {       ; only version 1 supported for now
+                bitsperpixel = header[4]
+                vera_colordepth = header[5]
+                width = peekw(&header+6)
+                height = peekw(&header+8)
+                palette_entries = header[10]
+                palette_start = header[11]
+                ; Data start is not needed
+                compression = header[14]
+                border = header[15]
+                return true
+            }
+        }
+        return false
+    }
+
+    sub build_header() {
+        ; build the internal BMX header structure
+        ; normally you don't have to call this yourself
+        sys.memset(header, sizeof(header), 0)
+        uword data_offset = sizeof(header) + palette_entries*2
+        header[0] = FILEID[0]
+        header[1] = FILEID[1]
+        header[2] = FILEID[2]
+        header[3] = 1        ; version 1
+        header[4] = bitsperpixel
+        header[5] = vera_colordepth
+        header[6] = lsb(width)
+        header[7] = msb(width)
+        header[8] = lsb(height)
+        header[9] = msb(height)
+        header[10] = palette_entries
+        header[11] = palette_start
+        header[12] = lsb(data_offset)
+        header[13] = msb(data_offset)
+        header[14] = compression
+        header[15] = border
+    }
+}

compiler/test/TestCompilerOnExamples.kt

@@ -121,6 +121,7 @@ class TestCompilerOnExamplesCx16: FunSpec({
             "multi-irq-new",
             "plasma",
             "rasterbars",
+            "showbmx",
             "snow",
             "spotlight",
             "tehtriz",

docs/source/libraries.rst

@@ -477,6 +477,29 @@ On the other targets, it only contains the definition of the 16 memory mapped vi
 ``restore_virtual_registers()``
     restore the values of all 16 virtual registers r0 - r15 from the buffer. Might be useful in an IRQ handler to avoid clobbering them.
 
+bmx  (cx16 only)
+----------------
+Routines to load and save "BMX" files, the CommanderX16 bitmap file format.
+Specification available here: https://cx16forum.com/forum/viewtopic.php?t=6945
+Only *uncompressed* bitmaps are supported in this library.
+
+The routines are designed to be fast and bulk load/save the data directly into or from vram,
+without the need to buffer something in main memory.
+
+Here is the load routine:
+
+``load(ubyte drivenumber, str filename, ubyte vbank, uword vaddr, uword screen_width)``
+    Loads a BMX bitmap image and palette into vram. (and Header info into the bmx.* variables)
+    Parameters:
+    the drive number and filename to load,
+    the vram bank and address where the bitmap data should go,
+    and the width of the current screen mode (can be 0 if you know no padding is needed).
+    You can set the ``bmx.max_width`` and ``bmx.max_height`` variables first, if you want this routine to check those.
+    Returns: success status. If false, ``bmx.error_message`` points to the error message string.
+
+For details about the other routines such as ``save``, have a look at
+the `source code <https://github.com/irmen/prog8/tree/master/compiler/res/prog8lib/cx16/bmx.p8>`_ .
+
 
 emudbg  (cx16 only)
 -------------------

examples/cx16/showbmx.p8

@@ -0,0 +1,47 @@
+
+; viewer program for BMX image files.
+; see https://cx16forum.com/forum/viewtopic.php?t=6945
+
+%import textio
+%import bmx
+%option no_sysinit
+%zeropage basicsafe
+
+main {
+    sub start() {
+        str filename = "?"*40
+
+        repeat {
+            txt.print("\nenter bmx image filename: ")
+            if txt.input_chars(&filename) {
+                if bmx.load_header(8, filename) {
+                    txt.print("\nwidth: ")
+                    txt.print_uw(bmx.width)
+                    txt.print("\nheight: ")
+                    txt.print_uw(bmx.height)
+                    txt.print("\nbpp: ")
+                    txt.print_uw(bmx.bitsperpixel)
+                    txt.nl()
+                    sys.wait(100)
+
+                    ; switch to correct screen mode and color depth
+                    void cx16.screen_mode($80, false)
+                    cx16.VERA_L0_CONFIG = cx16.VERA_L0_CONFIG & %11111100 | bmx.vera_colordepth
+                    ; actually load
+                    if bmx.load(8, filename, 0, 0, 320) {
+                        void txt.waitkey()
+                    }
+                }
+
+                cbm.CINT()  ; reset screen
+
+                if bmx.error_message {
+                    txt.print("load error:\n")
+                    txt.print(bmx.error_message)
+                    txt.nl()
+                    sys.wait(120)
+                }
+            }
+        }
+    }
+}

examples/test.p8

@@ -1,25 +1,43 @@
 %import textio
-%import syslib
+%import bmx
+%option no_sysinit
 %zeropage basicsafe
+
 main {
     sub start() {
-        ubyte xx = 1
-        uword ww=1
+        str filename = "?"*40
 
+        repeat {
+            txt.print("\nenter bmx image filename: ")
+            if txt.input_chars(&filename) {
+                if bmx.load_header(8, filename) {
+                    txt.print("\nwidth: ")
+                    txt.print_uw(bmx.width)
+                    txt.print("\nheight: ")
+                    txt.print_uw(bmx.height)
+                    txt.print("\nbpp: ")
+                    txt.print_uw(bmx.bitsperpixel)
+                    txt.nl()
+                    sys.wait(100)
 
-        xx |= %0001000
-        txt.print_ubbin(xx, true)
-        txt.nl()
-        xx &= %11110111
-        txt.print_ubbin(xx, true)
-        txt.nl()
+                    ; switch to correct screen mode and color depth
+                    void cx16.screen_mode($80, false)
+                    cx16.VERA_L0_CONFIG = cx16.VERA_L0_CONFIG & %11111100 | bmx.vera_colordepth
+                    ; actually load
+                    if bmx.load(8, filename, 0, 0, 320) {
+                        void txt.waitkey()
+                    }
+                }
 
+                cbm.CINT()  ; reset screen
 
-        ww |= %0001000
-        txt.print_uwbin(ww, true)
-        txt.nl()
-        ww &= %11110111
-        txt.print_uwbin(ww, true)
-        txt.nl()
+                if bmx.error_message {
+                    txt.print("load error:\n")
+                    txt.print(bmx.error_message)
+                    txt.nl()
+                    sys.wait(120)
+                }
+            }
+        }
     }
 }

parser/antlr/Prog8ANTLR.g4

@@ -188,7 +188,6 @@ expression :
 
 arrayindexed:
     scoped_identifier arrayindex
-    // TODO to allow chained/multidimensional array indexing:  | arrayindexed arrayindex
     ;