; bitmap pixel graphics module for the C64 ; only black/white monochrome 320x200 for now ; ; NOTE: For sake of speed, NO BOUNDS CHECKING is performed in most routines! ; You'll have to make sure yourself that you're not writing outside of bitmap boundaries! ; ; Sets character matrix and bitmap screen memory at a higher memory location $5c00-$7fff ; so that the program itself can be larger without starting to overwrite the graphics memory. graphics { %option ignore_unused const uword WIDTH = 320 const ubyte HEIGHT = 200 const uword BITMAP_ADDRESS = $6000 ; MUST BE IN REGULAR RAM if you are not messing with ROM/RAM banking. (and $2000-aligned) ; note: this constant is also used in a asm multiplication table below! const uword CHARS_ADDRESS = $5c00 ; must be in same vic memory bank as the bitmap. sub enable_bitmap_mode() { ; enable bitmap screen, erase it and set colors to black/white. clear_screen(1, 0) c64.SCROLY = %00111011 ; enable bitmap graphics mode c64.SCROLX = %00001000 ; 40 column mode, no scrolling, multicolor bitmap off c64.VMCSB = (lsb(CHARS_ADDRESS >> 6) & $F0) | (lsb((BITMAP_ADDRESS & $3fff) / $0800) << 1) ; set bitmap address c64.CIA2DDRA |= %11 c64.CIA2PRA = lsb(BITMAP_ADDRESS >> 14) ^ 3 ; set VIC bank. } sub disable_bitmap_mode() { ; enables erase the text screen, text mode sys.memset(CHARS_ADDRESS, 40*25, sc:' ') c64.SCROLY = %00011011 ; disable bitmap graphics mode c64.SCROLX = %00001000 ; 40 column mode, no scrolling c64.VMCSB = %00010100 ; screen addresses back to defaults c64.CIA2DDRA |= %11 c64.CIA2PRA = %11 ; back to VIC bank 0. } sub clear_screen(ubyte pixelcolor, ubyte bgcolor) { sys.memset(BITMAP_ADDRESS, 320*200/8, 0) sys.memset(CHARS_ADDRESS, 40*25, pixelcolor << 4 | bgcolor) sys.memset(cbm.Colors, 40*25, 255) } sub line(uword @zp x1, ubyte @zp y1, uword @zp x2, ubyte @zp y2) { ; Bresenham algorithm. ; This code special-cases various quadrant loops to allow simple ++ and -- operations. ; TODO implement this as optimized assembly, for instance https://github.com/EgonOlsen71/bresenham/blob/main/src/asm/graphics.asm ?? ; or from here https://retro64.altervista.org/blog/an-introduction-to-vector-based-graphics-the-commodore-64-rotating-simple-3d-objects/ if y1>y2 { ; make sure dy is always positive to have only 4 instead of 8 special cases cx16.r0 = x1 x1 = x2 x2 = cx16.r0 cx16.r0L = y1 y1 = y2 y2 = cx16.r0L } word @zp dx = (x2 as word)-x1 word @zp dy = (y2 as word)-y1 if dx==0 { vertical_line(x1, y1, abs(dy) as ubyte +1) return } if dy==0 { if x1>x2 x1=x2 horizontal_line(x1, y1, abs(dx) as uword +1) return } word @zp d = 0 ubyte positive_ix = true if dx < 0 { dx = -dx positive_ix = false } word @zp dx2 = dx*2 word @zp dy2 = dy*2 internal_plotx = x1 if dx >= dy { if positive_ix { repeat { internal_plot(y1) if internal_plotx==x2 return internal_plotx++ d += dy2 if d > dx { y1++ d -= dx2 } } } else { repeat { internal_plot(y1) if internal_plotx==x2 return internal_plotx-- d += dy2 if d > dx { y1++ d -= dx2 } } } } else { if positive_ix { repeat { internal_plot(y1) if y1 == y2 return y1++ d += dx2 if d > dy { internal_plotx++ d -= dy2 } } } else { repeat { internal_plot(y1) if y1 == y2 return y1++ d += dx2 if d > dy { internal_plotx-- d -= dy2 } } } } } sub rect(uword xx, ubyte yy, uword width, ubyte height) { if width==0 or height==0 return horizontal_line(xx, yy, width) if height==1 return horizontal_line(xx, yy+height-1, width) vertical_line(xx, yy+1, height-2) if width==1 return vertical_line(xx+width-1, yy+1, height-2) } sub fillrect(uword xx, ubyte yy, uword width, ubyte height) { if width==0 return repeat height { horizontal_line(xx, yy, width) yy++ } } sub horizontal_line(uword xx, ubyte yy, uword length) { if length<8 { internal_plotx=xx repeat lsb(length) { internal_plot(yy) internal_plotx++ } return } ubyte separate_pixels = lsb(xx) & 7 uword pixaddr = get_y_lookup(yy) + (xx&$fff8) if separate_pixels { %asm {{ lda p8v_pixaddr sta P8ZP_SCRATCH_W1 lda p8v_pixaddr+1 sta P8ZP_SCRATCH_W1+1 ldy p8v_separate_pixels lda hline_filled_right,y eor #255 ldy #0 ora (P8ZP_SCRATCH_W1),y sta (P8ZP_SCRATCH_W1),y }} pixaddr += 8 length += separate_pixels length -= 8 } if length { %asm {{ lda p8v_length and #7 sta p8v_separate_pixels lsr p8v_length+1 ror p8v_length lsr p8v_length+1 ror p8v_length lsr p8v_length+1 ror p8v_length lda p8v_pixaddr sta _modified+1 lda p8v_pixaddr+1 sta _modified+2 lda p8v_length ora p8v_length+1 beq _zero ldy p8v_length ldx #$ff _modified stx $ffff ; modified lda _modified+1 clc adc #8 sta _modified+1 bcc + inc _modified+2 + dey bne _modified _zero ldy p8v_separate_pixels beq hline_zero2 lda _modified+1 sta P8ZP_SCRATCH_W1 lda _modified+2 sta P8ZP_SCRATCH_W1+1 lda hline_filled_right,y ldy #0 ora (P8ZP_SCRATCH_W1),y sta (P8ZP_SCRATCH_W1),y jmp hline_zero2 hline_filled_right .byte 0, %10000000, %11000000, %11100000, %11110000, %11111000, %11111100, %11111110 hline_zero2 }} } } sub vertical_line(uword xx, ubyte yy, ubyte height) { internal_plotx = xx repeat height { internal_plot(yy) yy++ } } sub circle(uword xcenter, ubyte ycenter, ubyte radius) { ; Warning: NO BOUNDS CHECKS. Make sure circle fits in the screen. ; Midpoint algorithm. if radius==0 return ubyte @zp ploty ubyte @zp yy = 0 word @zp decisionOver2 = (1 as word)-radius while radius>=yy { internal_plotx = xcenter + radius ploty = ycenter + yy internal_plot(ploty) internal_plotx = xcenter - radius internal_plot(ploty) internal_plotx = xcenter + radius ploty = ycenter - yy internal_plot(ploty) internal_plotx = xcenter - radius internal_plot(ploty) internal_plotx = xcenter + yy ploty = ycenter + radius internal_plot(ploty) internal_plotx = xcenter - yy internal_plot(ploty) internal_plotx = xcenter + yy ploty = ycenter - radius internal_plot(ploty) internal_plotx = xcenter - yy internal_plot(ploty) yy++ if decisionOver2>=0 { radius-- decisionOver2 -= radius*$0002 } decisionOver2 += yy*$0002 decisionOver2++ } } sub disc(uword xcenter, ubyte ycenter, ubyte radius) { ; Warning: NO BOUNDS CHECKS. Make sure circle fits in the screen. ; Midpoint algorithm, filled if radius==0 return ubyte @zp yy = 0 word decisionOver2 = (1 as word)-radius while radius>=yy { horizontal_line(xcenter-radius, ycenter+yy, radius*2+1) horizontal_line(xcenter-radius, ycenter-yy, radius*2+1) horizontal_line(xcenter-yy, ycenter+radius, yy*2+1) horizontal_line(xcenter-yy, ycenter-radius, yy*2+1) yy++ if decisionOver2>=0 { radius-- decisionOver2 -= radius*$0002 } decisionOver2 += yy*$0002 decisionOver2++ } } ; here is the non-asm code for the plot routine below: ; sub plot_nonasm(uword px, ubyte py) { ; ubyte[] ormask = [128, 64, 32, 16, 8, 4, 2, 1] ; uword pixaddr = BITMAP_ADDRESS + 320*(py>>3) + (py & 7) + (px & %0000000111111000) ; @(pixaddr) |= ormask[lsb(px) & 7] ; } inline asmsub plot(uword plotx @XY, ubyte ploty @A) clobbers (A, X, Y) { %asm {{ stx p8b_graphics.p8v_internal_plotx sty p8b_graphics.p8v_internal_plotx+1 jsr p8b_graphics.p8s_internal_plot }} } ; for efficiency of internal algorithms here is the internal plot routine ; that takes the plotx coordinate in a separate variable instead of the XY register pair: uword @zp internal_plotx ; 0..319 ; separate 'parameter' for internal_plot() asmsub internal_plot(ubyte ploty @A) clobbers (A, X, Y) { ; internal_plotx is 16 bits 0 to 319... doesn't fit in a register %asm {{ tay lda p8v_internal_plotx+1 sta P8ZP_SCRATCH_W2+1 lsr a ; 0 sta P8ZP_SCRATCH_W2 lda p8v_internal_plotx pha and #7 tax lda _y_lookup_lo,y clc adc P8ZP_SCRATCH_W2 sta P8ZP_SCRATCH_W2 lda _y_lookup_hi,y adc P8ZP_SCRATCH_W2+1 sta P8ZP_SCRATCH_W2+1 pla ; internal_plotx and #%11111000 tay lda (P8ZP_SCRATCH_W2),y ora _ormask,x sta (P8ZP_SCRATCH_W2),y rts _ormask .byte 128, 64, 32, 16, 8, 4, 2, 1 ; note: this can be even faster if we also have a 256 byte x-lookup table, but hey. ; see http://codebase64.org/doku.php?id=base:various_techniques_to_calculate_adresses_fast_common_screen_formats_for_pixel_graphics ; the y lookup tables encodes this formula: BITMAP_ADDRESS + 320*(py>>3) + (py & 7) (y from 0..199) ; We use the 64tass syntax for range expressions to calculate this table on assembly time. _plot_y_values := p8c_BITMAP_ADDRESS + 320*(range(200)>>3) + (range(200) & 7) _y_lookup_lo .byte <_plot_y_values _y_lookup_hi .byte >_plot_y_values }} } asmsub get_y_lookup(ubyte yy @Y) -> uword @AY { %asm {{ lda p8s_internal_plot._y_lookup_lo,y pha lda p8s_internal_plot._y_lookup_hi,y tay pla rts }} } }