===================================== Library modules and builtin functions ===================================== The compiler provides several library modules with useful subroutine and variables. There are also a bunch of builtin functions. Some of the libraries may be specific for a certain compilation target, or work slightly different, but some effort is put into making them available across compilation targets. This means that as long as your program is only using the subroutines from these libraries and not using hardware- and/or system dependent code, and isn't hardcoding certain assumptions like the screen size, the exact same source program can be compiled for multiple different target platforms. Many of the example programs that come with Prog8 are written like this. You can ``%import`` and use these modules explicitly, but the compiler may also import one or more of these library modules automatically as required. .. note:: For full details on what is available in the libraries, please study their source code here: https://github.com/irmen/prog8/tree/master/compiler/res/prog8lib .. caution:: The resulting compiled binary program *only works on the target machine it was compiled for*. You must recompile the program for every target you want to run it on. .. note:: Several algorithms and math routines in Prog8's assembly library files are adapted from code publicly available on https://www.codebase64.org/ .. _builtinfunctions: Built-in Functions ------------------ There's a set of predefined functions in the language. These are fixed and can't be redefined in user code. You can use them in expressions and the compiler will evaluate them at compile-time if possible. Math ^^^^ abs (x) Returns the absolute value of a number (integer or floating point). min (x, y) Returns the smallest of x and y. Supported for integer types only, for floats use ``floats.minf()`` instead. max (x, y) Returns the largest of x and y. Supported for integer types only, for floats use ``floats.maxf()`` instead. clamp (value, minimum, maximum) Returns the value restricted to the given minimum and maximum. Supported for integer types only, for floats use ``floats.clampf()`` instead. sgn (x) Get the sign of the value (integer or floating point). The result is a byte: -1, 0 or 1 (negative, zero, positive). sqrt (w) Returns the square root of the number. Supports unsigned integer (result is ubyte) and floating point numbers. To do the reverse - squaring a number - just write ``x*x``. divmod (dividend, divisor, quotient, remainder) Performs division only once and returns both quotient and remainder in a single call, where using '/' and '%' separately would perform the division operation twice. All values are ubytes or all are uwords. The last two arguments must be variables to receive the quotient and remainder results, respectively. Array operations ^^^^^^^^^^^^^^^^ len (x) Number of values in the array value x, or the number of characters in a string (excluding the 0-byte). Note: this can be different from the number of *bytes* in memory if the datatype isn't a byte. See sizeof(). Note: lengths of strings and arrays are determined at compile-time! If your program modifies the actual length of the string during execution, the value of len(s) may no longer be correct! (use the ``strings.length`` routine if you want to dynamically determine the length by counting to the first 0-byte) Miscellaneous ^^^^^^^^^^^^^ cmp (x,y) Compare the integer value x to integer value y. Doesn't return a value or boolean result, only sets the processor's status bits! You can use a conditional jumps (``if_cc`` etcetera) to act on this. Normally you should just use a comparison expression (``x < y``) lsb (x) Get the least significant (lower) byte of the value x. Equivalent to ``x & 255``. lsw (x) Get the least significant (lower) word of the value x. Equivalent to ``x & 65535``. msb (x) Get the most significant (higher) byte of the word value x. If x is a value greater than a word, it will not actually return the *highest* byte of this value, but it will only look a the lower word part of this value and return the higher byte from that. So you're always getting bits 8-16 of the value x: ``msb($1234)`` is $12, whereas ``msb($123456)`` is $34. msw (x) Get the most significant (higher) word of the value x. For all word and byte numbers this will always result in 0. For a long integer though, it returns the upper 16 bits of x as an uword. If x is not greater than a 24 bit number ($ffffff), ``msw(x)`` will actually give you the bank byte of x (bits 16 to 23). You can treat this as an ubyte value, even if the function is normally returning a uword: ``msw($123456)`` is $0012, which you can treat as an ubyte. ``msw($12345678)`` is $1234, an uword. mkword (msb, lsb) Efficiently create a word value from two bytes (the msb and the lsb). Avoids multiplication and shifting. So mkword($80, $22) results in $8022. .. note:: The arguments to the mkword() function are in 'natural' order that is first the msb then the lsb. Don't get confused by how the system actually stores this 16-bit word value in memory (which is in little-endian format, so lsb first then msb) peek (address) same as @(address) - reads the byte at the given address in memory. peekw (address) reads the word value at the given address in memory. Word is read as usual little-endian lsb/msb byte order. peekf (address) reads the float value at the given address in memory. On CBM machines, this reads 5 bytes. poke (address, value) same as @(address)=value - writes the byte value at the given address in memory. pokew (address, value) writes the word value at the given address in memory, in usual little-endian lsb/msb byte order. pokef (address, value) writes the float value at the given address in memory. On CBM machines, this writes 5 bytes. pokemon (address, value) Like poke(), but also returns the previous value in the given address. Also doesn't have anything to do with a certain video game. rol (x) Rotate the bits in x (byte or word) one position to the left. This uses the CPU's rotate semantics: bit 0 will be set to the current value of the Carry flag, while the highest bit will become the new Carry flag value. (essentially, it is a 9-bit or 17-bit rotation) Modifies in-place, doesn't return a value (so can't be used in an expression). You can rol a memory location directly by using the direct memory access syntax, so like ``rol(@($5000))`` You can use ``if_cc`` or ``if_cs`` after a rol to act on the new carry bit, if required. rol2 (x) Like ``rol`` but now as 8-bit or 16-bit rotation. It uses some extra logic to not consider the carry flag as extra rotation bit. Modifies in-place, doesn't return a value (so can't be used in an expression). You can rol a memory location directly by using the direct memory access syntax, so like ``rol2(@($5000))`` ror (x) Rotate the bits in x (byte or word) one position to the right. This uses the CPU's rotate semantics: the highest bit will be set to the current value of the Carry flag, while bit 0 will become the new Carry flag value. (essentially, it is a 9-bit or 17-bit rotation) Modifies in-place, doesn't return a value (so can't be used in an expression). You can ror a memory location directly by using the direct memory access syntax, so like ``ror(@($5000))`` You can use ``if_cc`` or ``if_cs`` after a ror to act on the new carry bit, if required. ror2 (x) Like ``ror`` but now as 8-bit or 16-bit rotation. It uses some extra logic to not consider the carry flag as extra rotation bit. Modifies in-place, doesn't return a value (so can't be used in an expression). You can ror a memory location directly by using the direct memory access syntax, so like ``ror2(@($5000))`` setlsb (x, value) Sets the least significant byte of word variable x to a new value. Leaves the MSB untouched. setmsb (x, value) Sets the most significant byte of word variable x to a new value. Leaves the LSB untouched. sizeof (name) ; sizeof (number) Number of bytes that the object 'name', or the number 'number' occupies in memory. This is a constant determined by the data type of the object. For instance, for a variable of type uword, the sizeof is 2. For an 10 element array of floats, it is 50 (on the C64, where a float is 5 bytes). Note: usually you will be interested in the number of elements in an array, use len() for that. memory (name, size, alignment) Returns the address of the first location of a statically "reserved" block of memory of the given size in bytes, with the given name. The block is *uninitialized memory*; unlike other variables in Prog8 it is *not* set to zero at the start of the program! (if that is required, you can do so yourself using ``memset``). If you specify an alignment value >1, it means the block of memory will be aligned to such a dividable address in memory, for instance an alignment of $100 means the memory block is aligned on a page boundary, and $2 means word aligned (even addresses). Requesting the address of such a named memory block again later with the same name, will result in the same address as before. When reusing blocks in that way, it is required that the size argument is the same, otherwise you'll get a compilation error. This routine can be used to "reserve" parts of the memory where a normal byte array variable would not suffice; for instance if you need more than 256 consecutive bytes. The return value is an uword address, and you can use that like a pointer to the memory buffer. call (address) -> uword Calls a subroutine given by its memory address. You cannot pass arguments directly, although it is ofcourse possible to do this via the global ``cx16.r0...`` registers for example. It is *not* possible to use cpu registers to pass arguments, because these are clobbered while performing the call! It is assumed the subroutine returns a word value (in AY), if it does not, just add void to the call to ignore the result value. This function effectively creates an "indirect JSR" if you use it on a ``uword`` pointer variable. But because it doesn't handle bank switching etcetera by itself, it is a lot faster than ``callfar``. And it works on other systems than just the Commander X16. callfar (bank, address, argumentword) -> uword Calls an assembly routine in another bank. Be aware that ram OR rom bank may be changed depending on the address it jumps to! The argumentword will be loaded into the A+Y registers before calling the routine. The uword value that the routine returns in the A+Y registers, will be returned. NOTE: this routine is very inefficient, so don't use it to call often. Set the bank yourself or even write a custom tailored trampoline routine if you need to. Or use ``call`` if you can. callfar2 (bank, address, argA, argX, argY, argCarry) -> uword Identical to ``callfar``, except here you can give arguments not only for AY, but for each of the A, X and Y registers (each an ubyte) and the Carry status bit as well (a boolean). syscall (callnr), syscall1 (callnr, arg), syscall2 (callnr, arg1, arg2), syscall3 (callnr, arg1, arg2, arg3) Functions for doing a system call on targets that support this. Currently no actual target uses this though except, possibly, the experimental code generation target! The regular 6502 based compiler targets just use a subroutine call to asmsub Kernal routines at specific memory locations. So these builtin function calls are not useful yet except for experimentation in new code generation targets. rsave Saves all registers including status (or only X) on the stack Note: the 16 bit 'virtual' registers of the Commander X16 are *not* saved, but you can use ``cx16.save_virtual_registers()`` for that. rrestore Restore all registers including status (or only X) back from the cpu hardware stack Note: the 16 bit 'virtual' registers of the Commander X16 are *not* restored, but you can use ``cx16.restore_virtual_registers()`` for that. Low-fi variable and subroutine definitions in all available library modules --------------------------------------------------------------------------- These are auto generated and contain no documentation, but provide a view into what's available. Grouped per compilation target. * `atari <_static/symboldumps/skeletons-atari.txt>`_ * `c64 <_static/symboldumps/skeletons-c64.txt>`_ * `c128 <_static/symboldumps/skeletons-c128.txt>`_ * `cx16 <_static/symboldumps/skeletons-cx16.txt>`_ * `pet32 <_static/symboldumps/skeletons-pet32.txt>`_ * `neo <_static/symboldumps/skeletons-neo.txt>`_ * `virtual <_static/symboldumps/skeletons-virtual.txt>`_ syslib ------ The "system library" for your target machine. It contains many system-specific definitions such as ROM/Kernal subroutine definitions, memory location constants, and utility subroutines. Many of these definitions overlap for the C64 and Commander X16 targets so it is still possible to write programs that work on both targets without modifications. This module is usually imported automatically and can provide definitions in the ``sys``, ``cbm``, ``c64``, ``cx16``, ``c128``, ``atari`` blocks depending on the chosen compilation target. Read the `sys lib source code `_ for the correct compilation target to see exactly what is there. sys (part of syslib) -------------------- ``target`` A constant ubyte value designating the target machine that the program is compiled for. Notice that this is a compile-time constant value and is not determined on the system when the program is running. The following return values are currently defined: - 8 = Atari 8 bits - 16 = Commander X16 - 64 = Commodore 64 - 128 = Commodore 128 - 255 = Virtual machine ``exit (returncode)`` Immediately stops the program and exits it, with the returncode in the A register. Note: custom interrupt handlers remain active unless manually cleared first! ``exit2 (resultA, resultX, resultY)`` Immediately stops the program and exits it, with the result values in the A, X and Y registers. Note: custom interrupt handlers remain active unless manually cleared first! ``exit3 (resultA, resultX, resultY, carry)`` Immediately stops the program and exits it, with the result values in the A, X and Y registers, and the carry flag in the status register. Note: custom interrupt handlers remain active unless manually cleared first! ``memcopy (from, to, numbytes)`` Efficiently copy a number of bytes from a memory location to another. *Warning:* can only copy *non-overlapping* memory areas correctly! Because this function imposes some overhead to handle the parameters, it is only faster if the number of bytes is larger than a certain threshold. Compare the generated code to see if it was beneficial or not. The most efficient will often be to write a specialized copy routine in assembly yourself! ``memset (address, numbytes, bytevalue)`` Efficiently set a part of memory to the given (u)byte value. But the most efficient will always be to write a specialized fill routine in assembly yourself! Note that for clearing the screen, very fast specialized subroutines are available in the ``textio`` and ``graphics`` library modules. ``memsetw (address, numwords, wordvalue)`` Efficiently set a part of memory to the given (u)word value. But the most efficient will always be to write a specialized fill routine in assembly yourself! ``memcmp (address1, address2, size)`` Compares two blocks of memory of up to 65535 bytes in size. Returns -1 (255), 0 or 1, meaning: block 1 sorts before, equal or after block 2. ``read_flags () -> ubyte`` Returns the current value of the CPU status register. ``set_carry ()`` Sets the CPU status register Carry flag. ``clear_carry ()`` Clears the CPU status register Carry flag. ``set_irqd ()`` Sets the CPU status register Interrupt Disable flag. ``clear_irqd ()`` Clears the CPU status register Interrupt Disable flag. ``irqsafe_set_irqd ()`` Sets the CPU status register Interrupt Disable flag, in a way that is safe to be used inside a IRQ handler. Pair with ``irqsafe_clear_irqd()``. ``irqsafe_clear_irqd ()`` Clears the CPU status register Interrupt Disable flag, in a way that is safe to be used inside a IRQ handler. Pair with ``irqsafe_set_irqd()``. Inside an IRQ handler this makes sure it doesn't inadvertently clear the irqd status bit, and it can still be used inside normal code as well (where it *does* clear the irqd status bit if it was cleared before entering). ``progend ()`` Returns the last address of the program in memory + 1. This means: the memory address directly after all the program code and variables, including the uninitialized ones ("BSS" variables) and the uninitialized memory blocks reserved by the `memory()` function. Can be used to load dynamic data after the program, instead of hardcoding something. On the assembly level: it returns the address of the symbol "``prog8_program_end``". ``progstart ()`` Returns the first address of the program in memory. This usually is $0801 on the C64 and the X16, for example. On the assembly level: it returns the address of the symbol "``prog8_program_start``". ``wait (uword jiffies)`` wait approximately the given number of jiffies (1/60th seconds) Note: the regular system irq handler has run for this to work as it depends on the system jiffy clock. If this is is not possible (for instance because your program is running its own irq handler logic *and* no longer calls the kernal's handler routine), you'll have to write your own wait routine instead. ``waitvsync ()`` busy wait till the next vsync has occurred (approximately), without depending on custom irq handling. can be used to avoid screen flicker/tearing when updating screen contents. note: a more accurate way to wait for vsync is to set up a vsync irq handler instead. note for cx16: the regular system irq handler has to run for this to work (this is not required on C64 and C128) ``waitrastborder ()`` (c64/c128 targets only) busy wait till the raster position has reached the bottom screen border (approximately) can be used to avoid screen flicker/tearing when updating screen contents. note: a more accurate way to do this is by using a raster irq handler instead. ``reset_system ()`` Soft-reset the system back to initial power-on BASIC prompt. (called automatically by Prog8 when the main subroutine returns and the program is not using basicsafe zeropage option) ``disable_caseswitch()`` and ``enable_caseswitch()`` Disable or enable the ability to switch character set case using a keyboard combination. ``save_prog8_internals()`` and ``restore_prog8_internals()`` Normally not used in user code, the compiler utilizes these for the internal interrupt logic. It stores and restores the values of the internal prog8 variables. This allows other code to run that might clobber these values temporarily. ``push (value)`` pushes a byte value on the CPU hardware stack. Low-level function that should normally not be used. ``pushw (value)`` pushes a 16-bit word value on the CPU hardware stack. Low-level function that should normally not be used. ``pop ()`` pops a byte value off the CPU hardware stack and returns it. Low-level function that should normally not be used. ``popw ()`` pops a 16-bit word value off the CPU hardware stack and returns it. Low-level function that should normally not be used. buffers (experimental) ---------------------- A small library providing a 8 KB stack, an 8 KB ringbuffer, and a fast 256 bytes ringbuffer. Stack is a LIFO container, ringbuffers are FIFO containers. On the Commander X16 the stack and ringbuffer will use a HiRAM bank instead of system ram, you have to initialize that via the init(bank) routine. Read the `buffers source code `_ to see what's in there. Note that the init() routines have that extra bank parameter on the cx16. compression ----------- Routines for data compression and decompression. Currently only the 'ByteRun1' aka 'PackBits' RLE encoding is available. This is the compression that was also used in Amiga IFF images and in old MacPaint images. ``encode_rle (uword data, uword size, uword target, bool is_last_block) -> uword`` Compress the given data block using ByteRun1 aka PackBits RLE encoding. Returns the size of the compressed RLE data. Worst case result storage size needed = (size + (size+126) / 127) + 1. 'is_last_block' = usually true, but you can set it to false if you want to concatenate multiple compressed blocks (for instance if the source data is >64Kb) ``encode_rle_outfunc (uword data, uword size, uword output_function, bool is_last_block)`` Like ``encode_rle`` but not with an output buffer, but with an 'output_function' argument. This is the address of a routine that gets a byte arg in A, which is the next RLE byte to write to the compressed output buffer or file. ``decode_rle (uword compressed, uword target, uword maxsize) -> uword`` Decodes "ByteRun1" (aka PackBits) RLE compressed data. Control byte value 128 ends the decoding. Also stops decompressing if the maxsize has been reached. Returns the size of the decompressed data. ``decode_rle_srcfunc (uword source_function, uword target, uword maxsize) -> uword`` Decodes "ByteRun1" (aka PackBits) RLE compressed data. Control byte value 128 ends the decoding. Also stops decompressing when the maxsize has been reached. Returns the size of the decompressed data. Instead of a source buffer, you provide a callback function that must return the next byte to compress in A. ``decode_rle_vram (uword compressed, ubyte vbank, uword vaddr)`` (cx16 only) Decodes "ByteRun1" (aka PackBits) RLE compressed data directly into Vera VRAM. Control byte value 128 ends the decoding. While the X16 has pretty fast lzsa decompression in the kernal, RLE is still a lot faster to decode. However it also doesn't compress data nearly as well, but that's the usual tradeoff. There is a *compression* routine as well for RLE that you can run on the X16 itself, something that the lzsa compression lacks. conv ---- Routines to convert strings to numbers or vice versa. - numbers to strings, in various formats (binary, hex, decimal) - strings in decimal, hex and binary format into numbers (bytes, words) Read the `conv source code `_ to see what's in there. textio (txt.*) -------------- This will probably be the most used library module. It contains a whole lot of routines dealing with text-based input and output (to the screen). Such as - printing strings, numbers and booleans - reading text input from the user via the keyboard - filling or clearing the screen and colors - scrolling the text on the screen - placing individual characters on the screen - convert petscii to screencode characters All routines work with Screencode character encoding, except `print`, `chrout` and `input_chars`, these work with PETSCII encoding instead. Read the `textio source code `_ to see what's in there. (Note: slight variations for different compiler targets) diskio ------ Provides several routines that deal with disk drive I/O, such as: - list files on disk, optionally filtering by a simple pattern with ? and * - show disk directory as-is - display disk drive status - load and save data from and to the disk - delete and rename files on the disk - send arbitrary CbmDos command to disk drive For simplicity sake, this library is designed to work on a *single* open file for reading, and a *single* open file for writing at any time only. If you need to load or save to more than one file at a time, you'll have to write your own I/O routines (or supplement the ones found here) You can set the active *disk drive number*, so it supports multiple drives, just one at a time. It does not support reading from more than one file or writing to more than one file at a time. Commander X16 additions: Headerless load and save routines are available (load_raw, save_raw). On the Commander X16 it tries to use that machine's fast Kernal loading routines if possible. Routines to directly load data into video ram are also present (vload and vload_raw). Also contains a helper function to calculate the file size of a loaded file (although that is truncated to 16 bits, 64Kb) Als contains routines for operating on subdirectories (chdir, mkdir, rmdir), to relabel the disk, and to seek in open files. Read the `diskio source code `_ to see what's in there. (Note: slight variations for different compiler targets) .. note:: Opening a file using f_read() or f_read_w() doesn't set the default i/o channels to that file. In fact, after calling routines in diskio, it resets the input and output channels to their defaults (keyboard and screen). If you are going to do kernal I/O calls like CHRIN/CHROUT/(M)ACPTR yourself on the files opened via diskio, you must use reset_read_channel() or reset_write_channel() before doing so. This makes the correct file channel active. The diskio routines themselves do this as well internally. .. note:: If you are using the X16 emulator with HostFS, and are experiencing weird behavior with these routines, please first try again with an SD-card image instead of HostFs. It is possible that there are still small differences between HostFS and actual CBM DOS in the X16 emulator. .. attention:: Error handling is peculiar on CBM dos systems (C64, C128, cx16, PET). Read the descriptions for the various methods in this library for details and tips. strings ------- Provides string manipulation routines. ``length (str) -> ubyte length`` Number of bytes in the string. This value is determined during runtime and counts upto the first terminating 0 byte in the string, regardless of the size of the string during compilation time. Don't confuse this with ``len`` and ``sizeof``! ``left (source, length, target)`` Copies the left side of the source string of the given length to target string. It is assumed the target string buffer is large enough to contain the result. Also, you have to make sure yourself that length is smaller or equal to the length of the source string. Modifies in-place, doesn't return a value (so can't be used in an expression). ``right (source, length, target)`` Copies the right side of the source string of the given length to target string. It is assumed the target string buffer is large enough to contain the result. Also, you have to make sure yourself that length is smaller or equal to the length of the source string. Modifies in-place, doesn't return a value (so can't be used in an expression). ``slice (source, start, length, target)`` Copies a segment from the source string, starting at the given index, and of the given length to target string. It is assumed the target string buffer is large enough to contain the result. Also, you have to make sure yourself that start and length are within bounds of the strings. Modifies in-place, doesn't return a value (so can't be used in an expression). ``find (string, char) -> ubyte index, bool found`` Locates the first index of the given character in the string, and a boolean (in Carry flag) to say if it was found at all. If the character is not found, index 255 (and false) is returned. You can consider this a safer way of checking if a character occurs in a string than using an `in` containment check - because this find routine properly stops at the first 0-byte string terminator it encounters in case the string was modified. ``rfind (string, char) -> ubyte index, bool found`` Like ``find``, but now looking from the *right* of the string instead. ``contains (string, char) -> bool`` Just returns true if the character is in the given string, or false if it's not. For string literals, you can use a containment check expression instead: ``char in "hello world"``. ``compare (string1, string2) -> ubyte result`` Returns -1, 0 or 1 depending on whether string1 sorts before, equal or after string2. Note that you can also directly compare strings and string values with each other using ``==``, ``<`` etcetera (it will use strings.compare for you under water automatically). This even works when dealing with uword (pointer) variables when comparing them to a string type. ``copy (from, to) -> ubyte length`` Copy a string to another, overwriting that one. Returns the length of the string that was copied. Often you don't have to call this explicitly and can just write ``string1 = string2`` but this function is useful if you're dealing with addresses for instance. ``append (string, suffix) -> ubyte length`` Appends the suffix string to the other string (make sure the memory buffer is large enough!) Returns the length of the combined string. ``lower (string)`` Lowercases the PETSCII-string in place. ``upper (string)`` Uppercases the PETSCII-string in place. ``lowerchar (char)`` Returns lowercased PETSCII character. ``upperchar (char)`` Returns uppercased PETSCII character. ``strip (string)`` Gets rid of whitespace and other non-visible characters at the edges of the string. (destructive) ``rstrip (string)`` Gets rid of whitespace and other non-visible characters at the end of the string. (destructive) ``lstrip (string)`` Gets rid of whitespace and other non-visible characters at the start of the string. (destructive) ``lstripped (string) -> str`` Returns pointer to first non-whitespace and non-visible character at the start of the string (non-destructive lstrip) ``trim (string)`` Gets rid of whitespace characters at the edges of the string. (destructive) ``rtrim (string)`` Gets rid of whitespace characters at the end of the string. (destructive) ``ltrim (string)`` Gets rid of whitespace characters at the start of the string. (destructive) ``ltrimmed (string) -> str`` Returns pointer to first non-whitespace character at the start of the string (non-destructive ltrim) ``isdigit (char)`` Returns boolean if the character is a numerical digit 0-9 ``islower (char)``, ``isupper (char)``, ``isletter (char)`` Returns true if the character is a shifted-PETSCII lowercase letter, uppercase letter, or any letter, respectively. ``isspace (char)`` Returns true if the PETSCII character is a whitespace (tab, space, return, and shifted versions) ``isprint (char)`` Returns true if the PETSCII character is a "printable" character (space or any visible symbol) ``startswith (string, prefix) -> bool`` Returns true if string starts with prefix, otherwise false ``endswith (string, suffix) -> bool`` Returns true if string ends with suffix, otherwise false ``pattern_match (string, pattern) -> bool`` (not on Virtual target) Returns true if the string matches the pattern, false if not. '?' in the pattern matches any one character. '*' in the pattern matches any substring. ``hash (string) -> ubyte`` Returns a simple 8 bit hash value for the given string. The formula is: hash(-1)=179; clear carry; hash(i) = ROL hash(i-1) XOR string[i] (where ROL is the cpu ROL instruction) On the English word list in /usr/share/dict/words it seems to have a pretty even distribution. floats ------ .. note:: Floating point support is only available on c64, cx16 and virtual targets for now. Provides definitions for the ROM/Kernal subroutines and utility routines dealing with floating point variables. ``π`` and ``PI`` float const for the number Pi, 3.141592653589793... ``TWOPI`` float const for the number 2 times Pi ``atan (x)`` Arctangent. ``atan2 (y, x)`` Two-argument arctangent that returns an angle in the correct quadrant for the signs of x and y, normalized to the range [0, 2π] ``ceil (x)`` Rounds the floating point up to an integer towards positive infinity. ``cos (x)`` Cosine. ``cot (x)`` Cotangent: 1/tan(x) ``csc (x)`` Cosecant: 1/sin(x) ``deg (x)`` Radians to degrees. ``floor (x)`` Rounds the floating point down to an integer towards minus infinity. ``ln (x)`` Natural logarithm (base e). ``log2 (x)`` Base 2 logarithm. ``minf (x, y)`` returns the smallest of x and y. ``maxf (x, y)`` returns the largest of x and y. ``clampf (value, minimum, maximum)`` returns the value restricted to the given minimum and maximum. ``print (x)`` Prints the floating point number x as a string. There's no leading whitespace (unlike cbm BASIC when printing a floating point number) ``tostr (x)`` Converts the floating point number x to a string (returns address of the string buffer) There's no leading whitespace. ``rad (x)`` Degrees to radians. ``round (x)`` Rounds the floating point to the closest integer. ``sin (x)`` Sine. ``secant (x)`` Secant: 1/cos(x) ``tan (x)`` Tangent. ``rnd ()`` returns the next random float between 0.0 and 1.0 from the Pseudo RNG sequence. ``rndseed (seed)`` Sets a new seed for the float pseudo-RNG sequence. Use a negative non-zero number as seed value. ``parse (stringvalue)`` Parses the string value as floating point number. Warning: this routine may stop working on the Commander X16 when a new ROM version is released, because it uses an internal BASIC routine. Then it will require a fix. ``lerp(v0, v1, t)`` Linear interpolation (LERP). Precise method, which guarantees v = v1 when t = 1. Returns an interpolation between two inputs (v0, v1) for a parameter t in the closed unit interval [0.0, 1.0] ``lerp_fast(v0, v1, t)`` Linear interpolation (LERP). Imprecise (but faster) method, which does not guarantee v = v1 when t = 1 Teturns an interpolation between two inputs (v0, v1) for a parameter t in the closed unit interval [0.0, 1.0] ``interpolate(v, inputMin, inputMax, outputMin, outputMax)`` Interpolate a value v in interval [inputMin, inputMax] to output interval [outputMin, outputMax] graphics -------- Bitmap graphics routines: - clearing the screen - drawing individual pixels - drawing lines, rectangles, filled rectangles, circles, discs This library is available both on the C64 and the cx16. It uses the ROM based graphics routines on the latter, and it is a very small library because of that. On the cx16 there's also various other graphics modules if you want more features and different screen modes. See below for those. Read the `graphics source code `_ to see what's in there. (Note: slight variations for different compiler targets) math ---- Low-level integer math routines (which you usually don't have to bother with directly, but they are used by the compiler internally). Pseudo-Random number generators (byte and word). Various 8-bit integer trig functions that use lookup tables to quickly calculate sine and cosines. Usually a custom lookup table is the way to go if your application needs these, but perhaps the provided ones can be of service too. ``log2 (ubyte v)`` Returns the 2-Log of the byte value v. ``log2w (uword v)`` Returns the 2-Log of the word value v. ``rnd ()`` Returns next random byte 0-255 from the pseudo-RNG sequence. ``rndw ()`` Returns next random word 0-65535 from the pseudo-RNG sequence. ``randrange (ubyte n) -> ubyte`` Returns random byte uniformly distributed from 0 to n-1 (compensates for divisibility bias) ``randrangew (uword n) -> uword`` Returns random word uniformly distributed from 0 to n-1 (compensates for divisibility bias) ``rndseed (uword seed1, uword seed2)`` Sets a new seed for the pseudo-RNG sequence (both rnd and rndw). The seed consists of two words. Do not use zeros for the seed! .. hint:: This is a graph showing the various ranges of values mentioned in the integer sine and cosine routines that follow below. (Note that the x input value never corresponds to an exact *degree* around the circle 0..359 as that exceeds a byte value. There's double-degrees though; 0...179) Only the sine function is shown, but the cosine function follows the same pattern. .. image:: sinegraph.svg ``sin8u (x)`` Fast 8-bit ubyte sine. x = angle 0...2π scaled as 0...255. Result is unsigned, scaled as 0...255 ``sin8 (x)`` Fast 8-bit byte sine. x = angle 0...2π scaled as 0...255. Result is signed, scaled as -127...127 ``sinr8u (x)`` Fast 8-bit ubyte sine. x = angle 0...2π scaled as 0...179 (so each value increment is a 2° step). Result is unsigned, scaled as 0...255. Input values 180...255 lie outside of the valid input interval and will yield a garbage result! ``sinr8 (x)`` Fast 8-bit byte sine. x = angle 0...2π scaled as 0...179 (so each value increment is a 2° step). Result is signed, scaled as -127...127. Input values 180...255 lie outside of the valid input interval and will yield a garbage result! ``cos8u (x)`` Fast 8-bit ubyte cosine. x = angle 0...2π scaled as 0...255. Result is unsigned, scaled as 0...255 ``cos8 (x)`` Fast 8-bit byte cosine. x = angle 0...2π scaled as 0...255. Result is signed, scaled as -127...127 ``cosr8u (x)`` Fast 8-bit ubyte cosine. x = angle 0...2π scaled as 0...179 (so each value increment is a 2° step). Result is unsigned, scaled as 0...255. Input values 180...255 lie outside of the valid input interval and will yield a garbage result! ``cosr8 (x)`` Fast 8-bit byte cosine. x = of angle 0...2π scaled as 0...179 (so each value increment is a 2° step). Result is signed, scaled as -127...127. Input values 180...255 lie outside of the valid input interval and will yield a garbage result! ``atan2 (ubyte x1, ubyte y1, ubyte x2, ubyte y2)`` Fast arctan routine that uses more memory because of large lookup tables. Calculate the angle, in a 256-degree circle, between two points in the positive quadrant. ``direction (ubyte x1, ubyte y1, ubyte x2, ubyte y2)`` From a pair of positive coordinates, calculate discrete direction between 0 and 23. This is a heavily optimized routine (small and fast). ``direction_sc (byte x1, byte y1, byte x2, byte y2)`` From a pair of signed coordinates around the origin, calculate discrete direction between 0 and 23. This is a heavily optimized routine (small and fast). ``direction_qd (ubyte quadrant, ubyte xdelta, ubyte ydelta)`` If you already know the quadrant and x/y deltas, calculate discrete direction between 0 and 23. This is a heavily optimized routine (small and fast). ``diff (ubyte b1, ubyte b2) -> ubyte`` Returns the absolute difference, or distance, between the two byte values. (This routine is more efficient than doing a compare and a subtract separately, or using abs) ``diffw (uword w1, uword w2) -> uword`` Returns the absolute difference, or distance, between the two word values. (This routine is more efficient than doing a compare and a subtract separately, or using abs) ``mul16_last_upper () -> uword`` Fetches the upper 16 bits of the previous 16*16 bit multiplication. To avoid corrupting the result, it is best performed immediately after the multiplication. Note: It is only for the regular 6502 cpu multiplication routine. It does not work for the verafx multiplication routines on the Commander X16! These have a different way to obtain the upper 16 bits of the result: just read cx16.r0. **NOTE:** the result is only valid if the multiplication was done with uword arguments (or two positive word arguments). As soon as a single negative word value (or both) was used in the multiplication, these upper 16 bits are not valid! Suggestion (if you are on the Commander X16): use ``verafx.muls()`` to get a hardware accelerated 32 bit signed multiplication. ``crc16 (uword data, uword length) -> uword`` Returns a CRC-16 (XMODEM) checksum over the given data buffer. Note: on the Commander X16, there is a CRC-16 routine in the kernal: cx16.memory_crc(). That one is faster, but yields different results. It is unclear to me what flavour of crc it is calculating. ``crc16_start() / crc16_update(ubyte value) / crc16_end() -> uword`` "streaming" crc16 calculation routines, when the data doesn't fit in a single buffer. Tracks the crc16 checksum in cx16.r15! If your code uses that, it must save/restore it before calling this routine! Call the start() routine first, feed it bytes with the update() routine, finalize with calling the end() routine which returns the crc16 value. ``crc32 (uword data, uword length)`` Calculates a CRC-32 (POSIX) checksum over the given data buffer. The 32 bits result is stored in cx16.r14 (low word) and cx16.r15 (high word). ``crc32_start() / crc32_update(ubyte value) / crc32_end()`` "streaming" crc32 calculation routines, when the data doesn't fit in a single buffer. Tracks the crc32 checksum in cx16.r14 and cx16.r15! If your code uses these, it must save/restore them before calling this routine! Call the start() routine first, feed it bytes with the update() routine, finalize with calling the end() routine. The 32 bits result is stored in cx16.r14 (low word) and cx16.r15 (high word). ``lerp(v0, v1, t)`` Linear interpolation routine for unsigned byte values. Returns an interpolation between two inputs (v0, v1) for a parameter t in the interval [0, 255] Guarantees v = v1 when t = 255. ``lerpw(v0, v1, t)`` Linear interpolation routine for unsigned word values. Returns an interpolation between two inputs (v0, v1) for a parameter t in the interval [0, 65535] Guarantees v = v1 when t = 65535. ``interpolate(v, inputMin, inputMax, outputMin, outputMax)`` Interpolate a value v in interval [inputMin, inputMax] to output interval [outputMin, outputMax] All values are unsigned bytes. (there is no version for word values because of lack of precision in the fixed point calculation there). cx16logo -------- Just a fun module that contains the Commander X16 logo in PETSCII graphics and allows you to print it anywhere on the screen. ``logo ()`` prints the logo at the current cursor position ``logo_at (column, row)`` printss the logo at the given position prog8_lib --------- Low-level language support. You should not normally have to bother with this directly. The compiler needs it for various built-in system routines. cx16 ---- This is available on *all targets*, it is always imported as part of syslib. On the Commander X16 this module contains a *whole bunch* of things specific to that machine. It's way too much to include here, you have to study the `syslib source code `_ to see what is there. On the other targets, it only contains the definition of the 16 memory-mapped virtual registers (cx16.r0 - cx16.r15) and the following utility routines: ``save_virtual_registers()`` save the values of all 16 virtual registers r0 - r15 in a buffer. Might be useful in an IRQ handler to avoid clobbering them. ``restore_virtual_registers()`` restore the values of all 16 virtual registers r0 - r15 from the buffer. Might be useful in an IRQ handler to avoid clobbering them. ``cpu_is_65816()`` Returns true if the CPU in the computer is a 65816, false otherwise (6502 cpu). Note that Prog8 itself has no support yet for this CPU other than detecting its presence. ``reset_system ()`` Soft-reset the system back to initial power-on BASIC prompt. (same as the routine in sys) ``poweroff_system ()`` Powers down the computer. ``set_led_brightness (ubyte brightness)`` Sets the brightness of the activity led on the computer. bmx (cx16 only) ---------------- Routines to load and save "BMX" files, the CommanderX16 bitmap file format. Specification available here: https://cx16forum.com/forum/viewtopic.php?t=6945 Only *uncompressed* bitmaps are supported in this library for now. The routines are designed to be fast and bulk load/save the data directly into or from vram, without the need to buffer something in main memory. For details about what routines are available, have a look at the `bmx source code `_ . There's also the "showbmx" example to look at. emudbg (cx16 only) ------------------- X16Emu Emulator debug routines, for Cx16 only. Allows you to interface with the emulator's debug routines/registers. There's stuff like ``is_emulator`` to detect if running in the emulator, and ``console_write`` to write a (iso) string to the emulator's console (stdout) etc. Read the `emudbg source code `_ to see what's in there. Information about the exposed debug registers is in the `emulator's documentation `_. monogfx (cx16 and virtual) --------------------------- Full-screen lores or hires monochrome bitmap graphics routines, available on the Cx16 machine only. - two resolutions: lores 320*240 or hires 640*480 bitmap mode - optimized routines for monochrome (2-color) graphics - clearing screen, switching screen mode, also back to text mode - drawing and reading individual pixels - drawing lines, rectangles, filled rectangles, circles, discs - flood fill - drawing text inside the bitmap - can draw using a stipple pattern (alternate black/white pixels) and in invert mode (toggle pixels) Read the `monogfx source code `_ to see what's in there. gfx_lores and gfx_hires (cx16 only) ----------------------------------- Full-screen multicolor bitmap graphics routines, available on the Cx16 machine only. - gfx_lores: optimized routines for 320x240 256 color bitmap graphics mode. Compatible with X16 screen mode 128. - gfx_hires: optimized routines for 640x480 4 color bitmap graphics mode - enable bitmap graphics mode, also back to text mode - drawing and reading individual pixels - drawing lines, rectangles, filled rectangles, circles, discs - flood fill - drawing text inside the bitmap Read the `gfx_lores source code `_ or `gfx_hires source code `_ to see what's in there. They share the same routines. palette (cx16 only) -------------------- Available for the Cx16 target. Various routines to set the display color palette. There are also a few better looking Commodore 64 color palettes available here, because the Commander X16's default colors for this (the first 16 colors) are too saturated and are quite different than how they looked on a VIC-II chip in a C64. Read the `palette source code `_ to see what's in there. psg (cx16 only) ---------------- Available for the Cx16 target. Contains a simple abstraction for the Vera's PSG (programmable sound generator) to play simple waveforms. It includes an interrupt routine to handle simple Attack/Release envelopes as well. See the examples/cx16/bdmusic.p8 program for ideas how to use it. Read the `psg source code `_ to see what's in there. sprites (cx16 only) -------------------- Available for the Cx16 target. Simple routines to manipulate sprites. They're not written for high performance, but for simplicity. That's why they control one sprite at a time. The exception is the ``pos_batch`` routine, which is quite efficient to update sprite positions of multiple sprites in one go. See the examples/cx16/sprites/dragon.p8 and dragons.p8 programs for ideas how to use it. Read the `sprites source code `_ to see what's in there. verafx (cx16 only) ------------------- Available for the Cx16 target. Experimental routines that use the new Vera FX logic (hopefully coming in the Vera in new X16 boards, the emulators already support it). ``available`` Returns true if Vera FX is available, false if not (that would be an older Vera chip) ``muls`` The VeraFX signed word 16*16 to 32 multiplier is accessible via the ``muls`` routine. It is about 4 to 5 times faster than the default 6502 cpu routine for word multiplication. But it depends on some Vera manipulation and 4 bytes in vram just below the PSG registers for storage. Note: there is a block level %option "verafxmuls" that automatically replaces all word multiplications in that block by calls to verafx, but be careful with it because it may interfere with other Vera operations or IRQs. The full 32 bits result value is returned in two result values: lower word, upper word. ``mult16`` VeraFX hardware multiplication of two unsigned words. NOTE: it only returns the lower 16 bits of the full 32 bits result, because the upper 16 bits are not valid for unsigned word multiplications here (the signed word multiplier ``muls`` does return the full 32 bits result). It is about 4 to 5 times faster than the default 6502 cpu routine for word multiplication. But it depends on some Vera manipulation and 4 bytes in vram just below the PSG registers for storage. Note: there is a block level %option "verafxmuls" that automatically replaces all word multiplications in that block by calls to verafx, but be careful with it because it may interfere with other Vera operations or IRQs. ``clear`` Very quickly clear a piece of vram to a given byte value (it writes 4 bytes at a time). The routine is around 3 times faster as a regular unrolled loop to clear vram. ``copy`` Very quickly copy a portion of the video memory to somewhere else in vram (4 bytes at a time) Sometimes this is also called "blitting". This routine is about 50% faster as a regular byte-by-byte copy. ``transparency`` Set transparent write mode for VeraFX cached writes and also for normal writes to DATA0/DATA. If enabled, pixels with value 0 do not modify VRAM when written (so they are "transparent") Read the `verafx source code `_ to see what's in there.