; Prog8 definitions for the CommanderX16 ; Including memory registers, I/O registers, Basic and Kernal subroutines. ; ; Written by Irmen de Jong (irmen@razorvine.net) - license: GNU GPL 3.0 ; ; indent format: TABS, size=8 %target cx16 c64 { ; ---- kernal routines, these are the same as on the Commodore-64 (hence the same block name) ---- ; STROUT --> use screen.print ; CLEARSCR -> use screen.clear_screen ; HOMECRSR -> use screen.plot romsub $FF81 = CINT() clobbers(A,X,Y) ; (alias: SCINIT) initialize screen editor and video chip romsub $FF84 = IOINIT() clobbers(A, X) ; initialize I/O devices (CIA, SID, IRQ) romsub $FF87 = RAMTAS() clobbers(A,X,Y) ; initialize RAM, tape buffer, screen romsub $FF8A = RESTOR() clobbers(A,X,Y) ; restore default I/O vectors romsub $FF8D = VECTOR(uword userptr @ XY, ubyte dir @ Pc) clobbers(A,Y) ; read/set I/O vector table romsub $FF90 = SETMSG(ubyte value @ A) ; set Kernal message control flag romsub $FF93 = SECOND(ubyte address @ A) clobbers(A) ; (alias: LSTNSA) send secondary address after LISTEN romsub $FF96 = TKSA(ubyte address @ A) clobbers(A) ; (alias: TALKSA) send secondary address after TALK romsub $FF99 = MEMTOP(uword address @ XY, ubyte dir @ Pc) -> uword @ XY ; read/set top of memory pointer romsub $FF9C = MEMBOT(uword address @ XY, ubyte dir @ Pc) -> uword @ XY ; read/set bottom of memory pointer romsub $FF9F = SCNKEY() clobbers(A,X,Y) ; scan the keyboard romsub $FFA2 = SETTMO(ubyte timeout @ A) ; set time-out flag for IEEE bus romsub $FFA5 = ACPTR() -> ubyte @ A ; (alias: IECIN) input byte from serial bus romsub $FFA8 = CIOUT(ubyte databyte @ A) ; (alias: IECOUT) output byte to serial bus romsub $FFAB = UNTLK() clobbers(A) ; command serial bus device to UNTALK romsub $FFAE = UNLSN() clobbers(A) ; command serial bus device to UNLISTEN romsub $FFB1 = LISTEN(ubyte device @ A) clobbers(A) ; command serial bus device to LISTEN romsub $FFB4 = TALK(ubyte device @ A) clobbers(A) ; command serial bus device to TALK romsub $FFB7 = READST() -> ubyte @ A ; read I/O status word romsub $FFBA = SETLFS(ubyte logical @ A, ubyte device @ X, ubyte address @ Y) ; set logical file parameters romsub $FFBD = SETNAM(ubyte namelen @ A, str filename @ XY) ; set filename parameters romsub $FFC0 = OPEN() clobbers(A,X,Y) ; (via 794 ($31A)) open a logical file romsub $FFC3 = CLOSE(ubyte logical @ A) clobbers(A,X,Y) ; (via 796 ($31C)) close a logical file romsub $FFC6 = CHKIN(ubyte logical @ X) clobbers(A,X) ; (via 798 ($31E)) define an input channel romsub $FFC9 = CHKOUT(ubyte logical @ X) clobbers(A,X) ; (via 800 ($320)) define an output channel romsub $FFCC = CLRCHN() clobbers(A,X) ; (via 802 ($322)) restore default devices romsub $FFCF = CHRIN() clobbers(Y) -> ubyte @ A ; (via 804 ($324)) input a character (for keyboard, read a whole line from the screen) A=byte read. romsub $FFD2 = CHROUT(ubyte char @ A) ; (via 806 ($326)) output a character romsub $FFD5 = LOAD(ubyte verify @ A, uword address @ XY) -> ubyte @Pc, ubyte @ A, ubyte @ X, ubyte @ Y ; (via 816 ($330)) load from device romsub $FFD8 = SAVE(ubyte zp_startaddr @ A, uword endaddr @ XY) -> ubyte @ Pc, ubyte @ A ; (via 818 ($332)) save to a device romsub $FFDB = SETTIM(ubyte low @ A, ubyte middle @ X, ubyte high @ Y) ; set the software clock romsub $FFDE = RDTIM() -> ubyte @ A, ubyte @ X, ubyte @ Y ; read the software clock romsub $FFE1 = STOP() clobbers(A,X) -> ubyte @ Pz, ubyte @ Pc ; (via 808 ($328)) check the STOP key romsub $FFE4 = GETIN() clobbers(X,Y) -> ubyte @ A ; (via 810 ($32A)) get a character romsub $FFE7 = CLALL() clobbers(A,X) ; (via 812 ($32C)) close all files romsub $FFEA = UDTIM() clobbers(A,X) ; update the software clock romsub $FFED = SCREEN() -> ubyte @ X, ubyte @ Y ; read number of screen rows and columns romsub $FFF0 = PLOT(ubyte col @ Y, ubyte row @ X, ubyte dir @ Pc) -> ubyte @ X, ubyte @ Y ; read/set position of cursor on screen. Use screen.plot for a 'safe' wrapper that preserves X. romsub $FFF3 = IOBASE() -> uword @ XY ; read base address of I/O devices } cx16 { ; 65c02 hardware vectors: &uword NMI_VEC = $FFFA ; 6502 nmi vector, determined by the kernal if banked in &uword RESET_VEC = $FFFC ; 6502 reset vector, determined by the kernal if banked in &uword IRQ_VEC = $FFFE ; 6502 interrupt vector, determined by the kernal if banked in ; the sixteen virtual 16-bit registers &uword r0 = $02 &uword r1 = $04 &uword r2 = $06 &uword r3 = $08 &uword r4 = $0a &uword r5 = $0c &uword r6 = $0e &uword r7 = $10 &uword r8 = $12 &uword r9 = $14 &uword r10 = $16 &uword r11 = $18 &uword r12 = $1a &uword r13 = $1c &uword r14 = $1e &uword r15 = $20 ; VERA registers const uword VERA_BASE = $9F20 &ubyte VERA_ADDR_L = VERA_BASE + $00 &ubyte VERA_ADDR_M = VERA_BASE + $01 &ubyte VERA_ADDR_H = VERA_BASE + $02 &ubyte VERA_DATA0 = VERA_BASE + $03 &ubyte VERA_DATA1 = VERA_BASE + $04 &ubyte VERA_CTRL = VERA_BASE + $05 &ubyte VERA_IEN = VERA_BASE + $06 &ubyte VERA_ISR = VERA_BASE + $07 &ubyte VERA_IRQ_LINE_L = VERA_BASE + $08 &ubyte VERA_DC_VIDEO = VERA_BASE + $09 &ubyte VERA_DC_HSCALE = VERA_BASE + $0A &ubyte VERA_DC_VSCALE = VERA_BASE + $0B &ubyte VERA_DC_BORDER = VERA_BASE + $0C &ubyte VERA_DC_HSTART = VERA_BASE + $09 &ubyte VERA_DC_HSTOP = VERA_BASE + $0A &ubyte VERA_DC_VSTART = VERA_BASE + $0B &ubyte VERA_DC_VSTOP = VERA_BASE + $0C &ubyte VERA_L0_CONFIG = VERA_BASE + $0D &ubyte VERA_L0_MAPBASE = VERA_BASE + $0E &ubyte VERA_L0_TILEBASE = VERA_BASE + $0F &ubyte VERA_L0_HSCROLL_L = VERA_BASE + $10 &ubyte VERA_L0_HSCROLL_H = VERA_BASE + $11 &ubyte VERA_L0_VSCROLL_L = VERA_BASE + $12 &ubyte VERA_L0_VSCROLL_H = VERA_BASE + $13 &ubyte VERA_L1_CONFIG = VERA_BASE + $14 &ubyte VERA_L1_MAPBASE = VERA_BASE + $15 &ubyte VERA_L1_TILEBASE = VERA_BASE + $16 &ubyte VERA_L1_HSCROLL_L = VERA_BASE + $17 &ubyte VERA_L1_HSCROLL_H = VERA_BASE + $18 &ubyte VERA_L1_VSCROLL_L = VERA_BASE + $19 &ubyte VERA_L1_VSCROLL_H = VERA_BASE + $1A &ubyte VERA_AUDIO_CTRL = VERA_BASE + $1B &ubyte VERA_AUDIO_RATE = VERA_BASE + $1C &ubyte VERA_AUDIO_DATA = VERA_BASE + $1D &ubyte VERA_SPI_DATA = VERA_BASE + $1E &ubyte VERA_SPI_CTRL = VERA_BASE + $1F ; VERA_PSG_BASE = $1F9C0 ; VERA_PALETTE_BASE = $1FA00 ; VERA_SPRITES_BASE = $1FC00 ; I/O const uword via1 = $9f60 ;VIA 6522 #1 &ubyte d1prb = via1+0 &ubyte d1pra = via1+1 &ubyte d1ddrb = via1+2 &ubyte d1ddra = via1+3 &ubyte d1t1l = via1+4 &ubyte d1t1h = via1+5 &ubyte d1t1ll = via1+6 &ubyte d1t1lh = via1+7 &ubyte d1t2l = via1+8 &ubyte d1t2h = via1+9 &ubyte d1sr = via1+10 &ubyte d1acr = via1+11 &ubyte d1pcr = via1+12 &ubyte d1ifr = via1+13 &ubyte d1ier = via1+14 &ubyte d1ora = via1+15 const uword via2 = $9f70 ;VIA 6522 #2 &ubyte d2prb =via2+0 &ubyte d2pra =via2+1 &ubyte d2ddrb =via2+2 &ubyte d2ddra =via2+3 &ubyte d2t1l =via2+4 &ubyte d2t1h =via2+5 &ubyte d2t1ll =via2+6 &ubyte d2t1lh =via2+7 &ubyte d2t2l =via2+8 &ubyte d2t2h =via2+9 &ubyte d2sr =via2+10 &ubyte d2acr =via2+11 &ubyte d2pcr =via2+12 &ubyte d2ifr =via2+13 &ubyte d2ier =via2+14 &ubyte d2ora =via2+15 ; ---- Commander X-16 additions on top of C64 kernal routines ---- ; spelling of the names is taken from the Commander X-16 rom sources ; supported C128 additions romsub $ff4a = close_all() romsub $ff59 = lkupla() romsub $ff5c = lkupsa() romsub $ff5f = screen_set_mode(ubyte mode @A) clobbers(A, X, Y) -> ubyte @Pc romsub $ff62 = screen_set_charset(ubyte charset @A, uword charsetptr @XY) clobbers(A,X,Y) ; incompatible with C128 dlchr() romsub $ff65 = pfkey() romsub $ff6e = jsrfar() romsub $ff74 = fetch() romsub $ff77 = stash() romsub $ff7a = cmpare() romsub $ff7d = primm() ; X16 additions romsub $ff44 = macptr() romsub $ff47 = enter_basic(ubyte cold_or_warm @Pc) romsub $ff68 = mouse_config(ubyte shape @A, ubyte scale @X) clobbers (A, X, Y) romsub $ff6b = mouse_get(ubyte zpdataptr @X) clobbers(A) romsub $ff71 = mouse_scan() clobbers(A, X, Y) romsub $ff53 = joystick_scan() clobbers(A, X, Y) romsub $ff56 = joystick_get(ubyte joynr @A) -> ubyte @A, ubyte @X, ubyte @Y romsub $ff4d = clock_set_date_time() clobbers(A, X, Y) ; args: r0, r1, r2, r3L romsub $ff50 = clock_get_date_time() clobbers(A) ; outout args: r0, r1, r2, r3L ; high level graphics & fonts ; TODO specify the correct clobbers for GRAPH and FB functions romsub $ff20 = GRAPH_init() clobbers(A,X,Y) ; uses vectors=r0 romsub $ff23 = GRAPH_clear() clobbers(A,X,Y) romsub $ff26 = GRAPH_set_window() ; uses x=r0, y=r1, width=r2, height=r3 romsub $ff29 = GRAPH_set_colors(ubyte stroke @A, ubyte fill @X, ubyte background @Y) clobbers (A,X,Y) romsub $ff2c = GRAPH_draw_line() clobbers(A,X,Y) ; uses x1=r0, y1=r1, x2=r2, y2=r3 romsub $ff2f = GRAPH_draw_rect(ubyte fill @Pc) ; uses x=r0, y=r1, width=r2, height=r3, cornerradius=r4 romsub $ff32 = GRAPH_move_rect() ; uses sx=r0, sy=r1, tx=r2, ty=r3, width=r4, height=r5 romsub $ff35 = GRAPH_draw_oval(ubyte fill @Pc) ; uses x=r0, y=r1, width=r2, height=r3 romsub $ff38 = GRAPH_draw_image() ; uses x=r0, y=r1, ptr=r2, width=r3, height=r4 romsub $ff3b = GRAPH_set_font() ; uses ptr=r0 romsub $ff3e = GRAPH_get_char_size(ubyte baseline @A, ubyte width @X, ubyte height_or_style @Y, ubyte is_control @Pc) romsub $ff41 = GRAPH_put_char(ubyte char @A) ; uses x=r0, y=r1 ; framebuffer romsub $fef6 = FB_init() romsub $fef9 = FB_get_info() -> byte @A ; also outputs width=r0, height=r1 romsub $fefc = FB_set_palette(ubyte index @A, ubyte bytecount @X) ; also uses pointer=r0 romsub $feff = FB_cursor_position() ; uses x=r0, y=r1 romsub $ff02 = FB_cursor_next_line() ; uses x=r0 romsub $ff05 = FB_get_pixel() -> ubyte @A romsub $ff08 = FB_get_pixels() ; uses ptr=r0, count=r1 romsub $ff0b = FB_set_pixel(ubyte color @A) romsub $ff0e = FB_set_pixels() ; uses ptr=r0, count=r1 romsub $ff11 = FB_set_8_pixels(ubyte pattern @A, ubyte color @X) romsub $ff14 = FB_set_8_pixels_opaque(ubyte pattern @A, ubyte color1 @X, ubyte color2 @Y) ; also uses mask=r0L romsub $ff17 = FB_fill_pixels(ubyte color @A) ; also uses count=r0, step=r1 romsub $ff1a = FB_filter_pixels() ; uses ptr=r0, count=r1 romsub $ff1d = FB_move_pixels() ; uses sx=r0, sy=r1, tx=r2, ty=r3, count=r4 ; misc romsub $fef0 = sprite_set_image(ubyte number @A, ubyte width @X, ubyte height @Y, ubyte apply_mask @Pc) -> ubyte @Pc ; also uses pixels=r0, mask=r1, bpp=r2L romsub $fef3 = sprite_set_position(ubyte number @A) ; also uses x=r0 and y=r1 romsub $fee4 = memory_fill(ubyte value @A) ; uses address=r0, num_bytes=r1 romsub $fee7 = memory_copy() ; uses source=r0, target=r1, num_bytes=r2 romsub $feea = memory_crc() ; uses address=r0, num_bytes=r1 result->r2 romsub $feed = memory_decompress() ; uses input=r0, output=r1 result->r1 romsub $fedb = console_init() ; uses x=r0, y=r1, width=r2, height=r3 romsub $fede = console_put_char(ubyte char @A, ubyte wrapping @Pc) romsub $fee1 = console_get_char() -> ubyte @A romsub $fed8 = console_put_image() ; uses ptr=r0, width=r1, height=r2 romsub $fed5 = console_set_paging_message() ; uses messageptr=r0 romsub $fed2 = kbdbuf_put(ubyte key @A) romsub $fecf = entropy_get() -> ubyte @A, ubyte @X, ubyte @Y romsub $fecc = monitor() ; ---- end of kernal routines ---- asmsub init_system() { ; Initializes the machine to a sane starting state. ; Called automatically by the loader program logic. %asm {{ sei cld ;stz $00 ;stz $01 ;stz d1prb ; select rom bank 0 lda #$80 sta VERA_CTRL jsr c64.IOINIT jsr c64.RESTOR jsr c64.CINT lda #0 tax tay clc clv cli rts }} } }