prog8/compiler/res/prog8lib/virtual/string.p8
Irmen de Jong 905921a684 IR: new (sys)call instructions that encapsulate the full subroutine call
to fix the bugs resulting from nesting subroutine calls (as param to another call etc)
2023-05-14 15:20:25 +02:00

154 lines
5.4 KiB
Lua
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

; 0-terminated string manipulation routines. For the Virtual Machine target.
string {
sub length(str st) -> ubyte {
; Returns the number of bytes in the string.
; This value is determined during runtime and counts upto the first terminating 0 byte in the string,
; regardless of the size of the string during compilation time. Dont confuse this with len and sizeof!
ubyte count = 0
while st[count]
count++
return count
}
sub left(str source, ubyte slen, str target) {
; Copies the left side of the source string of the given length to target string.
; It is assumed the target string buffer is large enough to contain the result.
; Also, you have to make sure yourself that length is smaller or equal to the length of the source string.
; Modifies in-place, doesnt return a value (so cant be used in an expression).
target[slen] = 0
ubyte ix
for ix in 0 to slen-1 {
target[ix] = source[ix]
}
}
sub right(str source, ubyte slen, str target) {
; Copies the right side of the source string of the given length to target string.
; It is assumed the target string buffer is large enough to contain the result.
; Also, you have to make sure yourself that length is smaller or equal to the length of the source string.
; Modifies in-place, doesnt return a value (so cant be used in an expression).
ubyte offset = length(source)-slen
ubyte ix
for ix in 0 to slen-1 {
target[ix] = source[ix+offset]
}
target[ix]=0
}
sub slice(str source, ubyte start, ubyte slen, str target) {
; Copies a segment from the source string, starting at the given index,
; and of the given length to target string.
; It is assumed the target string buffer is large enough to contain the result.
; Also, you have to make sure yourself that start and length are within bounds of the strings.
; Modifies in-place, doesnt return a value (so cant be used in an expression).
ubyte ix
for ix in 0 to slen-1 {
target[ix] = source[ix+start]
}
target[ix]=0
}
sub find(str st, ubyte character) -> ubyte {
; Locates the first position of the given character in the string,
; returns Carry set if found + index in A, or Carry clear if not found.
ubyte ix
for ix in 0 to length(st)-1 {
if st[ix]==character {
sys.set_carry()
return ix
}
}
sys.clear_carry()
return 0
}
sub copy(str source, str target) -> ubyte {
; Copy a string to another, overwriting that one.
; Returns the length of the string that was copied.
; Often you dont have to call this explicitly and can just write string1 = string2
; but this function is useful if youre dealing with addresses for instance.
ubyte ix
repeat {
ubyte char=source[ix]
target[ix]=char
if not char
return ix
ix++
}
}
sub compare(str st1, str st2) -> byte {
; Compares two strings for sorting.
; Returns -1 (255), 0 or 1 depending on wether string1 sorts before, equal or after string2.
; Note that you can also directly compare strings and string values with eachother using
; comparison operators ==, < etcetera (it will use strcmp for you under water automatically).
%ir {{
loadm.w r65534,string.compare.st1
loadm.w r65535,string.compare.st2
syscall 29 (r65534.w, r65535.w) : r0.b
returnr.b r0
}}
}
sub lower(str st) -> ubyte {
; Lowercases the petscii string in-place. Returns length of the string.
; (for efficiency, non-letter characters > 128 will also not be left intact,
; but regular text doesn't usually contain those characters anyway.)
ubyte ix
repeat {
ubyte char=st[ix]
if not char
return ix
if char >= 'A' and char <= 'Z'
st[ix] = char | %00100000
ix++
}
}
sub upper(str st) -> ubyte {
; Uppercases the petscii string in-place. Returns length of the string.
ubyte ix
repeat {
ubyte char=st[ix]
if not char
return ix
if char >= 97 and char <= 122
st[ix] = char & %11011111
ix++
}
}
sub lowerchar(ubyte char) -> ubyte {
if char >= 'A' and char <= 'Z'
char |= %00100000
return char
}
sub upperchar(ubyte char) -> ubyte {
if char >= 'a' and char <= 'z'
char &= %11011111
return char
}
sub startswith(str st, str prefix) -> bool {
ubyte prefix_len = length(prefix)
ubyte str_len = length(st)
if prefix_len > str_len
return false
cx16.r9L = st[prefix_len]
st[prefix_len] = 0
cx16.r9H = compare(st, prefix) as ubyte
st[prefix_len] = cx16.r9L
return cx16.r9H==0
}
sub endswith(str st, str suffix) -> bool {
ubyte suffix_len = length(suffix)
ubyte str_len = length(st)
if suffix_len > str_len
return false
return compare(st + str_len - suffix_len, suffix) == 0
}
}