4cade/src/glue.prorwts2.a

;license:MIT
;(c) 2018 by 4am & qkumba
;
; ProRWTS2 glue functions
;
; Public functions
; - LoadFile
; - LoadDHRFile
; - SaveSmallFile
;
; A general note about paths:
;
; LoadFile, LoadDHRFile, and SaveSmallFile support files in subdirectories.
; Paths are delimited by '/' like ProDOS. HOWEVER, you should never include a
; disk volume name. At program startup, we get the current directory and save
; it; that is the PROGRAM ROOT DIRECTORY. The first '/' always points to the
; PROGRAM ROOT DIRECTORY. All pathnames are relative to the PROGRAM ROOT
; DIRECTORY.
;
; The PROGRAM ROOT DIRECTORY is not guaranteed to be the root directory of the
; underlying ProDOS disk (although it can be). These functions provide no
; access to any directory above the PROGRAM ROOT DIRECTORY, i.e. you can't use
; '..' to access the parent directory.
;
; Examples:
; '/PREFS.CONF' points to a file named 'PREFS.CONF' in the PROGRAM ROOT
; DIRECTORY.
;
; '/FX/RIPPLE' points to a file named 'RIPPLE' in a directory named 'FX' in the
; PROGRAM ROOT DIRECTORY.

gRootDirectory
         !word $FDFD
gPrefix
         !word $FDFD

;------------------------------------------------------------------------------
; LoadFile
; load a file into memory all at once, using ProRWTS2
; supports paths, see note
; uses file's load address
;
; in:    stack contains 2 bytes of parameters:
;        +1 address of filename
; out:   all flags clobbered
;        all registers clobbered
;        stack set to next instruction after parameters
;------------------------------------------------------------------------------
LoadFile
         +PARAMS_ON_STACK 2
         +LDPARAM 1
         +STAY namlo                 ; set filename
         +STAY gPrefix               ; remember path

         jsr   traverse              ; go to subdirectory, set up filename for read

         lda   #cmdread              ; read (instead of write)
         sta   reqcmd
         lda   #0                    ; 0 = read into main memory
         sta   auxreq
         lda   #$FF                  ; read entire file (ProRWTS2 will figure out exact size)
         sta   sizehi
         jmp   hddopendir            ; exit via ProRWTS2

;------------------------------------------------------------------------------
; LoadDHRFile
; load .A2FC file (uncompressed double hi-res graphics) into memory
; all at once, using ProRWTS2
; first $2000 bytes of file are loaded into auxiliary memory $2000..$3FFF
; second $2000 bytes of file are loaded into main memory $2000..$3FFF
; supports paths, see note
;
; in:    stack contains 2 bytes of parameters:
;        +1 address of filename
; out:   all flags clobbered
;        all registers clobbered
;        stack set to next instruction after parameters
;------------------------------------------------------------------------------
LoadDHRFile
         +PARAMS_ON_STACK 2
         +LDPARAM 1
         +STAY namlo                 ; set filename

         jsr   traverse              ; go to subdirectory, set up filename for read

         lda   #$00                  ; read first $2000 bytes
         sta   sizelo
         lda   #$20
         sta   sizehi
         lda   #1                    ; 1 = read into aux memory
         sta   auxreq
         lda   #cmdread              ; read (instead of write)
         sta   reqcmd
         jsr   hddopendir            ; call ProRWTS2
         lda   #$20                  ; read next $2000 bytes
         sta   sizehi
         dec   auxreq                ; 0 = read into main memory
         clc                         ; not a subdirectory
         jmp   hddrdwrpart           ; call ProRWTS2

;------------------------------------------------------------------------------
; SaveSmallFile
; Save a file into memory all at once, using ProRWTS2.
; /!\ Only first block (512 bytes) is written. Keep those files small. /!\
; /!\ All 512 bytes are written to disk. Clear buffer before calling. /!\
; supports paths, see note
;
; in:    stack contains 4 bytes of parameters:
;        +1 address of filename
;        +3 address of data buffer
; out:   all flags clobbered
;        all registers clobbered
;        stack set to next instruction after parameters
;------------------------------------------------------------------------------
SaveSmallFile
         +PARAMS_ON_STACK 4
         +LDPARAM 1
         +STAY namlo                 ; set filename for ProRWTS2
         +STAY gPrefix               ; remember path

         +LDPARAM 3
         +STAY ldrlo                 ; set data buffer address for ProRWTS2

         jsr   traverse              ; go to subdirectory, set up filename for read

         lda   #cmdwrite             ; write (instead of read)
         sta   reqcmd
         lda   #0                    ; 0 = data buffer is in main memory (instead of auxmem)
         sta   auxreq
         jmp   hddopendir            ; exit via ProRWTS2

;------------------------------------------------------------------------------
; traverse [private]
;
; in:    (namlo) points to length-prefixed pathname+filename
; out:   all flags clobbered
;        all registers clobbered
;------------------------------------------------------------------------------
traverse
         +LDAY gRootDirectory
         sta   @myreadblock+1
         sty   @myreadblock+3        ; reset 'root' directory (saved at program start)

         ;search for '/' character in filename

         ldx   #0
         ldy   #0
         lda   (namlo), y
         tay
-        inx
         dey
         bmi   @go                   ; no '/', just do the read
         lda   (namlo), y
         cmp   #'/'
         bne   -
         sty   sizelo
         txa
         pha

@myreadblock
@myx80_parms
         ldx   #2
         lda   #0
         jsr   hddreaddirsel
         lda   #NAME_LENGTH
         sta   bloklo
         lda   #>(hdddirbuf - 1)
         sta   blokhi

         ;there can be only one page crossed, so we can increment here

@mynextent1
         inc   blokhi
@mynextent
         ldy   #0
         lda   (bloklo), y
         pha
         and   #$0f
         tax
--       iny
         lda   (bloklo), y
         cmp   (namlo), y
         beq   @myfoundname

         ;match failed, move to next directory in this block, if possible

-        pla

@myskiphdr
         clc
         lda   bloklo
         adc   #ENTRY_SIZE
         sta   bloklo
         bcs   @mynextent1
         cmp   #$ff ;4 + ($27 * $0d)
         bne   @mynextent

         ;read next directory block when we reach the end of this block

         lda   hdddirbuf + NEXT_BLOCK_LO
         ldx   hdddirbuf + NEXT_BLOCK_HI
         bcs   +

@myfoundname
         dex
         bne   --

         ;parse path until last directory is seen

         iny
         lda   (namlo), y
         cmp   #'/'
         bne   -
         pla
         and   #$20 ;Volume Directory Header XOR subdirectory
         bne   @myskiphdr
         tya
         eor   #$ff
         adc   sizelo
         sta   sizelo
         clc
         tya
         adc   namlo
         sta   namlo

         ;cache block number of current directory
         ;as starting position for subsequent searches

         ldy   #(KEY_POINTER + 1)
         lda   (bloklo), y
         tax
         dey
         lda   (bloklo), y
         sta   (reloc + unrhddblocklo - unrelochdd) + 1
         stx   (reloc + unrhddblockhi - unrelochdd) + 1
+        sta   @myx80_parms + 1
         stx   @myx80_parms + 3
++       lda   sizelo
         bne   @myreadblock
         tay

         pla
         sta   (namlo), y
@go
         rts

promote
!pseudopc $bf00 {
        lda    $c08b
        clc
        bcc    @do_enter
;$bf06
        rts ;clock interface, must be RTS on real ProDOS if program uses $20x
@do_enter
        lda    $c08b
        jmp    ProDOS_enter
        !text  "q4!"
;$bf10
        !word  $c1d1, $c2d1, $c3d1, $c4d1, $c5d1, $c6d1, $c7d1
ProDOS_exit
        lda    $c081
        pla ;saved inside ProDOS_enter
        tay
        pla
        tax
        lda    #0
        rts
ProDOS_fatal ;only for debugging, will be removed
        pha
        lda    $c081
        jsr    $fe89
        jsr    $fe93
        pla
        jsr    $fdda
        jmp    $ff59
ProDOS_prefix=$bfd0
;        !fill  $2e
}
end_promote

;------------------------------------------------------------------------------
; ProDOS_enter
; intercept certain ProDOS requests
; wrap them to ProRWTS2 file requests
;
; in:    return address+1 is command and pointer to parameter block
; out:   all flags clobbered
;        A=0, X and Y preserved
;        stack set to next instruction after parameters
;
; to do: preserve non-$4x zpage locations for titles that open files after start
;------------------------------------------------------------------------------
packet = $40 ;word
buffer = $42 ;word

ProDOS_enter
  !ifdef PASS2 {
!set CloseHandles = @imp_close
  } else { ;PASS2
    !set PASS2=1
  }
    pla
    sta    @fetchaddr+1
    pla
    sta    @fetchaddr+2
    jsr    @fetchbyte
    sta    @request+1
    jsr    @fetchbyte
    sta    packet
    jsr    @fetchbyte
    sta    packet+1
    lda    @fetchaddr+2
    pha
    lda    @fetchaddr+1
    pha
    txa
    pha
    tya
    pha
@request
    lda    #$d1
    cmp    #$c4
    beq    @do_getattrib
    cmp    #$c7
    beq    @do_prefix
    cmp    #$c8
    beq    @do_open
    cmp    #$ca
    beq    @do_read
    cmp    #$cb
    beq    @do_write
    cmp    #$cc
    beq    @do_close
    cmp    #$ce
    beq    @do_seek
    ;;any others??
    jmp    ProDOS_fatal
@do_getattrib
    jsr    @imp_getattrib
    jmp    ProDOS_exit
@do_prefix
    jsr    @imp_prefix
    jmp    ProDOS_exit
@do_open
    jsr    @imp_open
    jmp    ProDOS_exit
@do_read
    jsr    @imp_read
    jmp    ProDOS_exit
@do_write
    jsr    @imp_write
    jmp    ProDOS_exit
@do_close
    jsr    @imp_close
    jmp    ProDOS_exit
@do_seek
    jsr    @imp_seek
    jmp    ProDOS_exit

@imp_getattrib
    lda    packet+1
    pha
    lda    packet
    pha
    ldx    #namlo
    jsr    @setbuffer1
    lda    #$60
    sta    attribpatch
    jsr    hddopendir
    lda    #$10
    sta    attribpatch
    pla
    sta    packet
    pla
    sta    packet+1
    ldy    #5
    lda    ldrlo2
    sta    (packet), y
    iny
    lda    ldrlo2+1
    sta    (packet), y
    rts

@imp_prefix
    ldx    #buffer
    jsr    @setbuffer1
    ldy    ProDOS_prefix
@copy_prefix
    lda    ProDOS_prefix, y
    sta    (buffer), y
    dey
    bpl    @copy_prefix
    rts

@imp_open
    ldx    #namlo
    jsr    @setbuffer1
    iny
    inc    @handles+1
@handles
    ldx    #0
    iny
    lda    (packet), y
    sta    @handle-1, x
    tax
    jsr    @patch_buffer
    iny
    lda    #1
    sta    (packet), y
    lda    #0
    sta    reqcmd
    sta    sizehi
    sta    sizelo
    jsr    hddopendir
    ldx    encbufpatch1+1
    inx
    stx    @block_index2+2
    lda    #0
    beq    @block_index2 ;always

@imp_seek
    lda    #cmdseek
    !byte  $2c
@imp_read
    lda    #cmdread
    !byte  $2c
@imp_write
    lda    #cmdwrite
    sta    reqcmd
    jsr    @set_rdwrbuff
    ldx    encbufpatch1+1
    inx
    stx    @block_index1+2
    stx    @block_index2+2
@block_index1
    lda    $d1ff
    sta    blkidx
    clc ;not a subdirectory
    jsr    hddrdwrpart
    lda    blkidx
@block_index2
    sta    $d1ff
    rts

@imp_close
    lda    @handles+1
    beq    @close_ret
    dec    @handles+1
    bne    @close_ret
    lda    #>hddencbuf

@patch_buffer
    sta    encbufpatch1+1
    sta    encbufpatch2+1
    tax
    inx
    stx    dirbufpatch1+1
    inx
    stx    dirbufpatch2+2
    stx    dirbufpatch3+2
    stx    dirbufpatch4+2
    stx    dirbufpatch6+1
    stx    dirbufpatch7+2
    stx    dirbufpatch9+2
    stx    dirbufpatch10+1
    inx
    stx    dirbufpatch5+2
    stx    dirbufpatch8+2
@close_ret
    rts

@fetchbyte
    inc    @fetchaddr+1
    bne    @fetchaddr
    inc    @fetchaddr+2
@fetchaddr
    lda    $d1d1
    rts

@set_rdwrbuff
    ldy    #1
    lda    (packet), y
    tax
    lda    @handle-1, x
    tax
    jsr    @patch_buffer
    ldx    #ldrlo
    iny
    jsr    @setbuffer
    ldx    #sizelo
    iny
    !byte  $2c
@setbuffer1
    ldy    #1

@setbuffer
    lda    (packet), y
    sta    $0,x
    iny
    lda    (packet), y
    sta    $1,x
    rts

@handle
    !byte  0, 0 ;only up to two handles at a time