mirror of
https://github.com/AppleWin/AppleWin.git
synced 2024-05-28 17:41:37 +00:00
Change HDD firmware to a separate V2 name and folders.
Revert back old firmware into original place. Bounce version of firmware loaded in Hardisk.cpp
This commit is contained in:
parent
5262d50b0f
commit
6472f47c79
Binary file not shown.
|
@ -55,8 +55,6 @@ hd_unitnum = $c083
|
||||||
hd_memblock = $c084
|
hd_memblock = $c084
|
||||||
hd_diskblock = $c086
|
hd_diskblock = $c086
|
||||||
;hd_nextbyte = $c088 ; legacy read-only port (still supported by AppleWin)
|
;hd_nextbyte = $c088 ; legacy read-only port (still supported by AppleWin)
|
||||||
hd_imgsizelo = $c089
|
|
||||||
hd_imgsizehi = $c08a
|
|
||||||
|
|
||||||
; Notes on accesses to I/O registers:
|
; Notes on accesses to I/O registers:
|
||||||
; . ROR ABS16,X and ROL ABS16,X - only used for $C081+s*$10 STATUS register:
|
; . ROR ABS16,X and ROL ABS16,X - only used for $C081+s*$10 STATUS register:
|
||||||
|
@ -282,12 +280,7 @@ GetSlotInX
|
||||||
; Post:
|
; Post:
|
||||||
; C = hd_status.b0
|
; C = hd_status.b0
|
||||||
; A = result of hd_execute
|
; A = result of hd_execute
|
||||||
; Read or write command
|
|
||||||
; X = Slot# << 4
|
; X = Slot# << 4
|
||||||
; Y = command
|
|
||||||
; Status command
|
|
||||||
; X = low byte of disk size
|
|
||||||
; Y = high byte of disk size
|
|
||||||
cmdproc
|
cmdproc
|
||||||
php
|
php
|
||||||
|
|
||||||
|
@ -316,21 +309,11 @@ cmdproc
|
||||||
|
|
||||||
done
|
done
|
||||||
ror hd_status,x ; Post: C=0 or 1
|
ror hd_status,x ; Post: C=0 or 1
|
||||||
ldy command ; Was it status
|
|
||||||
beq size ; yes, fill in the values
|
|
||||||
rts ; no, go home
|
|
||||||
|
|
||||||
size
|
|
||||||
pha ; Save result
|
|
||||||
ldy hd_imgsizehi,x ; Get high byte of size
|
|
||||||
lda hd_imgsizelo,x ; Get low byte of size
|
|
||||||
tax ; Transfer into X
|
|
||||||
pla ; Get back status call result
|
|
||||||
rts
|
rts
|
||||||
|
|
||||||
;======================================
|
;======================================
|
||||||
|
|
||||||
; 18 unused bytes
|
; 33 unused bytes
|
||||||
|
|
||||||
!zone data
|
!zone data
|
||||||
|
|
||||||
|
@ -347,12 +330,12 @@ size
|
||||||
; $D7 = Removable, Interruptable, #Volumes=2, Supports write/read/status
|
; $D7 = Removable, Interruptable, #Volumes=2, Supports write/read/status
|
||||||
; $BF = Removable, Interruptable, #Volumes=4, Supports format/write/read/status (KEGS / IIGS)
|
; $BF = Removable, Interruptable, #Volumes=4, Supports format/write/read/status (KEGS / IIGS)
|
||||||
|
|
||||||
; datablock. This starts near the end of the firmware (at offset $FB)
|
; datablock. This starts near the end of the firmware (at offset $FC)
|
||||||
;; data
|
;; data
|
||||||
@checkCsFB
|
@checkCsFC
|
||||||
*= $00FB ; org $00FB
|
*= $00FC ; org $00FC
|
||||||
!warn "CsFB padding = ", * - @checkCsFB
|
!warn "CsFC padding = ", * - @checkCsFC
|
||||||
!byte $00 ; Smart port ID Type byte
|
|
||||||
!word $0000 ; how many blocks are on the device. Zero means use status call
|
!word $7fff ; how many blocks are on the device.
|
||||||
!byte $D7 ; specifics about the device (number of drives, read/write/format capability, etc)
|
!byte $D7 ; specifics about the device (number of drives, read/write/format capability, etc)
|
||||||
!byte <Entrypoint_ProDOS ; entry point offset for ProDOS (must be $0a)
|
!byte <Entrypoint_ProDOS ; entry point offset for ProDOS (must be $0a)
|
||||||
|
|
11
firmware/HDDv2/build.bat
Normal file
11
firmware/HDDv2/build.bat
Normal file
|
@ -0,0 +1,11 @@
|
||||||
|
@REM ACME only ever returns 0!
|
||||||
|
acme.exe hddrvr-v2.a65
|
||||||
|
@IF %ERRORLEVEL% NEQ 0 goto error
|
||||||
|
|
||||||
|
copy hddrvr-v2.bin ..\..\resource
|
||||||
|
@goto end
|
||||||
|
|
||||||
|
:error
|
||||||
|
@echo "ACME failed"
|
||||||
|
|
||||||
|
:end
|
358
firmware/HDDv2/hddrvr-v2.a65
Normal file
358
firmware/HDDv2/hddrvr-v2.a65
Normal file
|
@ -0,0 +1,358 @@
|
||||||
|
;AppleWin : An Apple //e emulator for Windows
|
||||||
|
;
|
||||||
|
;Copyright (C) 1994-1996, Michael O'Brien
|
||||||
|
;Copyright (C) 1999-2001, Oliver Schmidt
|
||||||
|
;Copyright (C) 2002-2005, Tom Charlesworth
|
||||||
|
;Copyright (C) 2006-2012, Tom Charlesworth, Michael Pohoreski
|
||||||
|
;
|
||||||
|
;AppleWin is free software; you can redistribute it and/or modify
|
||||||
|
;it under the terms of the GNU General Public License as published by
|
||||||
|
;the Free Software Foundation; either version 2 of the License, or
|
||||||
|
;(at your option) any later version.
|
||||||
|
;
|
||||||
|
;AppleWin is distributed in the hope that it will be useful,
|
||||||
|
;but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
;MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
;GNU General Public License for more details.
|
||||||
|
;
|
||||||
|
;You should have received a copy of the GNU General Public License
|
||||||
|
;along with AppleWin; if not, write to the Free Software
|
||||||
|
;Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||||
|
;
|
||||||
|
|
||||||
|
; Description: Firmware for harddisk card
|
||||||
|
;
|
||||||
|
; Author: Copyright (c) 2005, Robert Hoem
|
||||||
|
;
|
||||||
|
|
||||||
|
; Modified by Tom Charlesworth:
|
||||||
|
; . Updated so it can be assembled by ACME 0.97
|
||||||
|
; . Fixed so that ProDOS entrypoint is $c70a (26 Dev 2007) (Bug #12723)
|
||||||
|
; . Modified to support Apple Oasis' entrypoint: $c761 (8 Sept 2012) (Feature #5557)
|
||||||
|
; . Added support for SmartPort entrypoint (20 Oct 2012)
|
||||||
|
; - EG. "Prince of Persia (Original 3.5 floppy for IIc+).2mg"
|
||||||
|
; . GH#370 (Robert Hoem, 27 Oct 2016):
|
||||||
|
; . Added a check against open-apple during boot to route boot to slot 6
|
||||||
|
; . This happens after the first two blocks are loaded from the HD.
|
||||||
|
; . GH#319: SmartPort return address wrong when crossing page
|
||||||
|
; . GH#996: Make code slot-independent (so HDD controller card can go into any slot)
|
||||||
|
; . Moved the 512-byte block read into AppleWin's HDD emulation (to mirror the block write command)
|
||||||
|
; TODO:
|
||||||
|
; . Remove support for Entrypoint_Cs46 (old AppleWin) & Entrypoint_Cs61 (Apple Oasis)
|
||||||
|
; - provide a utility to convert these to use Entrypoint_ProDOS
|
||||||
|
; . Check SmartPort: Is it OK to trash Y and $42,..,$47 ?
|
||||||
|
;
|
||||||
|
|
||||||
|
!cpu 6502 ; Compatible with all Apple2's
|
||||||
|
!to "hddrvr-v2.bin", plain
|
||||||
|
!sl "hddrvr-v2.labels"
|
||||||
|
|
||||||
|
; constants
|
||||||
|
hd_execute = $c080
|
||||||
|
hd_status = $c081 ; b7=busy, b0=error
|
||||||
|
hd_command = $c082
|
||||||
|
hd_unitnum = $c083
|
||||||
|
hd_memblock = $c084
|
||||||
|
hd_diskblock = $c086
|
||||||
|
;hd_nextbyte = $c088 ; legacy read-only port (still supported by AppleWin)
|
||||||
|
hd_imgsizelo = $c089
|
||||||
|
hd_imgsizehi = $c08a
|
||||||
|
|
||||||
|
; Notes on accesses to I/O registers:
|
||||||
|
; . ROR ABS16,X and ROL ABS16,X - only used for $C081+s*$10 STATUS register:
|
||||||
|
; 6502: double read (old data), write (old data), write (new data). The writes are harmless as writes to STATUS are ignored.
|
||||||
|
; 65C02: double read (old data), write (new data). The write is harmless as writes to STATUS are ignored.
|
||||||
|
; . STA ABS16,X does a false-read. This is harmless for writable I/O registers, since the false-read has no side effect.
|
||||||
|
|
||||||
|
command = $42
|
||||||
|
unitnum = $43
|
||||||
|
memblock = $44
|
||||||
|
diskblock = $46
|
||||||
|
|
||||||
|
slot6 = $C600
|
||||||
|
OS = $0801
|
||||||
|
BUTTON0 = $C061
|
||||||
|
|
||||||
|
;======================================
|
||||||
|
|
||||||
|
!zone code
|
||||||
|
|
||||||
|
*= $0000 ; org $0000 - position-independent code, so doesn't matter (but the other fixed org positions need to be on the same page)
|
||||||
|
|
||||||
|
; The Autoboot rom will call this.
|
||||||
|
; This is also the entry point for such things as IN#7 and PR#7
|
||||||
|
|
||||||
|
start
|
||||||
|
|
||||||
|
; Autoboot and ProDOS look at the following few opcodes to detect block devices
|
||||||
|
; NB. $Cn07 should be $00 for a SmartPort Interface, but changing this means that it won't autoboot on ][, ][+ and unenhanced IIe.
|
||||||
|
; . ref: http://www.1000bit.it/support/manuali/apple/technotes/udsk/tn.udsk.2.html
|
||||||
|
lda #$20
|
||||||
|
lda #$00
|
||||||
|
lda #$03
|
||||||
|
lda #$3C
|
||||||
|
bne Bootstrap
|
||||||
|
|
||||||
|
Entrypoint_ProDOS ; $Cn0A - ProDOS entrypoint
|
||||||
|
sec
|
||||||
|
bcs Entrypoint
|
||||||
|
|
||||||
|
Entrypoint_SmartPort ; $Cn0D - SmartPort entrypoint
|
||||||
|
clc
|
||||||
|
|
||||||
|
Entrypoint ; $Cn0E - entrypoint?
|
||||||
|
bcs GetSlotInX ; C=1: GetSlotInX -> cmdproc
|
||||||
|
|
||||||
|
; C=0: fall through to SmartPort...
|
||||||
|
|
||||||
|
;======================================
|
||||||
|
|
||||||
|
; TODO: Is it OK to trash Y and $42,..,$47 ?
|
||||||
|
; Pre: C=0, X = Slot# << 4
|
||||||
|
SmartPort ; SmartPort -> GetSlotInX -> cmdproc
|
||||||
|
pla
|
||||||
|
sta $46
|
||||||
|
adc #3 ; Pre: C=0, Post: C=0 or 1
|
||||||
|
tay
|
||||||
|
pla
|
||||||
|
sta $47 ; ($46) = &cmd_hdr
|
||||||
|
adc #0
|
||||||
|
pha
|
||||||
|
tya
|
||||||
|
pha ; (sp).w += 3
|
||||||
|
|
||||||
|
ldy #1
|
||||||
|
lda ($46),y ; cmd
|
||||||
|
sta $42
|
||||||
|
iny
|
||||||
|
|
||||||
|
lda ($46),y ; param_l
|
||||||
|
sta $45
|
||||||
|
iny
|
||||||
|
lda ($46),y ; param_h
|
||||||
|
sta $46
|
||||||
|
|
||||||
|
ldy #1 ; skip paramLength (assume it's #$03)
|
||||||
|
lda ($45),y ; unit
|
||||||
|
sta $43
|
||||||
|
iny
|
||||||
|
|
||||||
|
lda ($45),y ; memblock_l
|
||||||
|
sta $44
|
||||||
|
iny
|
||||||
|
lda ($45),y ; memblock_h
|
||||||
|
pha
|
||||||
|
iny
|
||||||
|
|
||||||
|
lda ($45),y ; diskblock_l
|
||||||
|
pha
|
||||||
|
iny
|
||||||
|
|
||||||
|
bne SmartPort2
|
||||||
|
|
||||||
|
;======================================
|
||||||
|
; 2 unused bytes
|
||||||
|
|
||||||
|
@checkCs46
|
||||||
|
*= $0046 ; org $0046
|
||||||
|
!warn "Cs46 padding = ", * - @checkCs46
|
||||||
|
|
||||||
|
Entrypoint_Cs46 ; Old f/w 'cmdproc' entrypoint
|
||||||
|
; Keep this for any DOSMaster HDD images created with old AppleWin HDD f/w.
|
||||||
|
; DOSMaster hardcodes the entrypoint addr into its bootstrapping code:
|
||||||
|
; - So DOSMaster images are tied to the HDD's controller's f/w
|
||||||
|
sec
|
||||||
|
bcs Entrypoint ; or directly to GetSlotInX
|
||||||
|
|
||||||
|
;======================================
|
||||||
|
|
||||||
|
Bootstrap
|
||||||
|
; Lets check to see if there's an image ready
|
||||||
|
; Slot n, disk 1
|
||||||
|
clc
|
||||||
|
bcc GetSlotInX ; Post: X = Slot# << 4
|
||||||
|
Bootstrap2
|
||||||
|
lda #$00
|
||||||
|
sta hd_unitnum,x ; b7=0 => disk 1
|
||||||
|
sta hd_command,x
|
||||||
|
lda hd_execute,x
|
||||||
|
ror hd_status,x ; Post: C=0 or 1
|
||||||
|
bcc hdboot
|
||||||
|
|
||||||
|
; no image ready, boot diskette image instead
|
||||||
|
BootSlot6
|
||||||
|
jmp slot6
|
||||||
|
|
||||||
|
;======================================
|
||||||
|
; 2 unused bytes
|
||||||
|
|
||||||
|
@checkCs61
|
||||||
|
*= $0061 ; org $0061
|
||||||
|
!warn "Cs61 padding = ", * - @checkCs61
|
||||||
|
|
||||||
|
Entrypoint_Cs61 ; Apple Oasis HDD controller entrypoint
|
||||||
|
; Keep this for any DOSMaster HDD images created with Apple Oasis HDD f/w.
|
||||||
|
; DOSMaster hardcodes the entrypoint addr into its bootstrapping code:
|
||||||
|
; - So DOSMaster images are tied to the HDD's controller's f/w
|
||||||
|
sec
|
||||||
|
bcs Entrypoint ; or directly to GetSlotInX
|
||||||
|
|
||||||
|
;======================================
|
||||||
|
|
||||||
|
; image ready. Lets boot from it.
|
||||||
|
; we want to load block 1 from disk 1 to $800 then jump there
|
||||||
|
; Pre: X = Slot# << 4
|
||||||
|
; C = 0
|
||||||
|
hdboot
|
||||||
|
lda #$0
|
||||||
|
sta unitnum ; b7=0 => disk 1
|
||||||
|
sta memblock
|
||||||
|
sta diskblock
|
||||||
|
sta diskblock+1
|
||||||
|
lda #$8
|
||||||
|
sta memblock+1
|
||||||
|
lda #$1
|
||||||
|
sta command
|
||||||
|
bne cmdproc
|
||||||
|
hdboot2
|
||||||
|
bcs BootSlot6
|
||||||
|
|
||||||
|
bit BUTTON0 ; button 0 pressed?
|
||||||
|
bmi BootSlot6
|
||||||
|
|
||||||
|
; Pre: X = Slot# << 4
|
||||||
|
jmp OS
|
||||||
|
|
||||||
|
;======================================
|
||||||
|
|
||||||
|
SmartPort2
|
||||||
|
lda ($45),y ; diskblock_h
|
||||||
|
sta $47
|
||||||
|
|
||||||
|
pla
|
||||||
|
sta $46
|
||||||
|
pla
|
||||||
|
sta $45
|
||||||
|
|
||||||
|
sec
|
||||||
|
; fall through...
|
||||||
|
|
||||||
|
;======================================
|
||||||
|
|
||||||
|
; Pre:
|
||||||
|
; C=0 => via Bootstrap
|
||||||
|
; C=1 => via Entrypoint / SmartPort2
|
||||||
|
; Post:
|
||||||
|
; X = Slot# << 4
|
||||||
|
GetSlotInX
|
||||||
|
php
|
||||||
|
sei ; disable ints, in case an int handler races our $0000/RTS and stack accesses!
|
||||||
|
|
||||||
|
; NB. need RAM that's guaranteed to be both read & writeable:
|
||||||
|
; . can't use $0200-$BFFF, due to eg. RAMRD=0/RAMWRT=1 combination
|
||||||
|
; . can't use LC as ROM might be enabled.
|
||||||
|
; So use ZP (specifically $0000) as whatever the state of ALTZP, both read & write will be to the same physical memory location.
|
||||||
|
lda $00 ; save $00
|
||||||
|
ldx #$60 ; opcode RTS
|
||||||
|
stx $00
|
||||||
|
jsr $0000 ; RTS immediately (NB. can't use $FF58, since LC RAM may be switched in)
|
||||||
|
sta $00 ; restore $00
|
||||||
|
tsx
|
||||||
|
lda $0100,x ; $Cn
|
||||||
|
asl
|
||||||
|
asl
|
||||||
|
asl
|
||||||
|
asl
|
||||||
|
tax ; X=$n0
|
||||||
|
|
||||||
|
plp ; + restore int status
|
||||||
|
bcc Bootstrap2
|
||||||
|
; otherwise fall through for Entrypoint / SmartPort...
|
||||||
|
|
||||||
|
;--------------------------------------
|
||||||
|
|
||||||
|
; entry point for ProDOS' block driver
|
||||||
|
; simple really. Copy the command from $42..$47
|
||||||
|
; to our I/O ports then execute command
|
||||||
|
|
||||||
|
; Pre:
|
||||||
|
; C=0 => via Bootstrap (hdboot)
|
||||||
|
; C=1 => via GetSlotInX (eg. Entrypoint / SmartPort2)
|
||||||
|
; X = Slot# << 4
|
||||||
|
; Post:
|
||||||
|
; C = hd_status.b0
|
||||||
|
; A = result of hd_execute
|
||||||
|
; Read or write command
|
||||||
|
; X = Slot# << 4
|
||||||
|
; Y = command
|
||||||
|
; Status command
|
||||||
|
; X = low byte of disk size
|
||||||
|
; Y = high byte of disk size
|
||||||
|
cmdproc
|
||||||
|
php
|
||||||
|
|
||||||
|
lda command
|
||||||
|
sta hd_command,x
|
||||||
|
lda unitnum
|
||||||
|
sta hd_unitnum,x
|
||||||
|
lda memblock
|
||||||
|
sta hd_memblock,x
|
||||||
|
lda memblock+1
|
||||||
|
sta hd_memblock+1,x
|
||||||
|
lda diskblock
|
||||||
|
sta hd_diskblock,x
|
||||||
|
lda diskblock+1
|
||||||
|
sta hd_diskblock+1,x
|
||||||
|
lda hd_execute,x ; A = result of hd_execute (NB. instantaneous 512 byte r/w!)
|
||||||
|
|
||||||
|
- rol hd_status,x ; b7=busy doing DMA?
|
||||||
|
bcs -
|
||||||
|
|
||||||
|
plp ; restore C from start of cmdproc
|
||||||
|
bcs done
|
||||||
|
ror hd_status,x ; Post: C=0 or 1
|
||||||
|
lda #0
|
||||||
|
beq hdboot2
|
||||||
|
|
||||||
|
done
|
||||||
|
ror hd_status,x ; Post: C=0 or 1
|
||||||
|
ldy command ; Was it status
|
||||||
|
beq size ; yes, fill in the values
|
||||||
|
rts ; no, go home
|
||||||
|
|
||||||
|
size
|
||||||
|
pha ; Save result
|
||||||
|
ldy hd_imgsizehi,x ; Get high byte of size
|
||||||
|
lda hd_imgsizelo,x ; Get low byte of size
|
||||||
|
tax ; Transfer into X
|
||||||
|
pla ; Get back status call result
|
||||||
|
rts
|
||||||
|
|
||||||
|
;======================================
|
||||||
|
|
||||||
|
; 18 unused bytes
|
||||||
|
|
||||||
|
!zone data
|
||||||
|
|
||||||
|
; $CsFE = status bits (BAP p7-14)
|
||||||
|
; 7 = medium is removable
|
||||||
|
; 6 = device is interruptable
|
||||||
|
; 5-4 = number of volumes (0..3 means 1..4)
|
||||||
|
; 3 = device supports Format call
|
||||||
|
; 2 = device can be written to
|
||||||
|
; 1 = device can be read from (must be 1)
|
||||||
|
; 0 = device status can be read (must be 1)
|
||||||
|
|
||||||
|
; $C7 = Removable, Interruptable, #Volumes=1, Supports write/read/status
|
||||||
|
; $D7 = Removable, Interruptable, #Volumes=2, Supports write/read/status
|
||||||
|
; $BF = Removable, Interruptable, #Volumes=4, Supports format/write/read/status (KEGS / IIGS)
|
||||||
|
|
||||||
|
; datablock. This starts near the end of the firmware (at offset $FB)
|
||||||
|
;; data
|
||||||
|
@checkCsFB
|
||||||
|
*= $00FB ; org $00FB
|
||||||
|
!warn "CsFB padding = ", * - @checkCsFB
|
||||||
|
!byte $00 ; Smart port ID Type byte
|
||||||
|
!word $0000 ; how many blocks are on the device. Zero means use status call
|
||||||
|
!byte $D7 ; specifics about the device (number of drives, read/write/format capability, etc)
|
||||||
|
!byte <Entrypoint_ProDOS ; entry point offset for ProDOS (must be $0a)
|
BIN
firmware/HDDv2/hddrvr-v2.bin
Normal file
BIN
firmware/HDDv2/hddrvr-v2.bin
Normal file
Binary file not shown.
|
@ -332,6 +332,7 @@ IDR_DISK2_13SECTOR_FW FIRMWARE "Disk2-13sector.rom"
|
||||||
IDR_DISK2_16SECTOR_FW FIRMWARE "Disk2.rom"
|
IDR_DISK2_16SECTOR_FW FIRMWARE "Disk2.rom"
|
||||||
IDR_SSC_FW FIRMWARE "SSC.rom"
|
IDR_SSC_FW FIRMWARE "SSC.rom"
|
||||||
IDR_HDDRVR_FW FIRMWARE "Hddrvr.bin"
|
IDR_HDDRVR_FW FIRMWARE "Hddrvr.bin"
|
||||||
|
IDR_HDDRVR_V2_FW FIRMWARE "Hddrvr-v2.bin"
|
||||||
IDR_PRINTDRVR_FW FIRMWARE "Parallel.rom"
|
IDR_PRINTDRVR_FW FIRMWARE "Parallel.rom"
|
||||||
IDR_MOCKINGBOARD_D_FW FIRMWARE "Mockingboard-D.rom"
|
IDR_MOCKINGBOARD_D_FW FIRMWARE "Mockingboard-D.rom"
|
||||||
IDR_MOUSEINTERFACE_FW FIRMWARE "MouseInterface.rom"
|
IDR_MOUSEINTERFACE_FW FIRMWARE "MouseInterface.rom"
|
||||||
|
|
BIN
resource/Hddrvr-v2.bin
Normal file
BIN
resource/Hddrvr-v2.bin
Normal file
Binary file not shown.
Binary file not shown.
|
@ -52,6 +52,7 @@
|
||||||
#define IDR_APPLE2_JPLUS_VIDEO_ROM 152
|
#define IDR_APPLE2_JPLUS_VIDEO_ROM 152
|
||||||
#define IDR_BASE_64A_ROM 153
|
#define IDR_BASE_64A_ROM 153
|
||||||
#define IDR_BASE64A_VIDEO_ROM 154
|
#define IDR_BASE64A_VIDEO_ROM 154
|
||||||
|
#define IDR_HDDRVR_V2_FW 155
|
||||||
#define IDC_KEYB_BUFFER_ENABLE 1005
|
#define IDC_KEYB_BUFFER_ENABLE 1005
|
||||||
#define IDC_SAVESTATE 1006
|
#define IDC_SAVESTATE 1006
|
||||||
#define IDC_SAVESTATE_ON_EXIT 1007
|
#define IDC_SAVESTATE_ON_EXIT 1007
|
||||||
|
|
|
@ -167,7 +167,7 @@ void HarddiskInterfaceCard::InitializeIO(LPBYTE pCxRomPeripheral)
|
||||||
{
|
{
|
||||||
const DWORD HARDDISK_FW_SIZE = APPLE_SLOT_SIZE;
|
const DWORD HARDDISK_FW_SIZE = APPLE_SLOT_SIZE;
|
||||||
|
|
||||||
BYTE* pData = GetFrame().GetResource(IDR_HDDRVR_FW, "FIRMWARE", HARDDISK_FW_SIZE);
|
BYTE* pData = GetFrame().GetResource(IDR_HDDRVR_V2_FW, "FIRMWARE", HARDDISK_FW_SIZE);
|
||||||
if (pData == NULL)
|
if (pData == NULL)
|
||||||
return;
|
return;
|
||||||
|
|
||||||
|
@ -795,7 +795,8 @@ bool HarddiskInterfaceCard::ImageSwap(void)
|
||||||
// 2: Updated $C7nn firmware to fix GH#319
|
// 2: Updated $C7nn firmware to fix GH#319
|
||||||
// 3: Updated $Csnn firmware to fix GH#996 (now slot-independent code)
|
// 3: Updated $Csnn firmware to fix GH#996 (now slot-independent code)
|
||||||
// Added: Not Busy Cycle
|
// Added: Not Busy Cycle
|
||||||
static const UINT kUNIT_VERSION = 3;
|
// 4: Updated $Csnn firmware to fix GH#1264
|
||||||
|
static const UINT kUNIT_VERSION = 4;
|
||||||
|
|
||||||
#define SS_YAML_VALUE_CARD_HDD "Generic HDD"
|
#define SS_YAML_VALUE_CARD_HDD "Generic HDD"
|
||||||
|
|
||||||
|
|
Loading…
Reference in New Issue
Block a user