Support FORMAT cmd:
. HDC firmware: byte $FE, b3=1 (format supported)
. HDC firmware: allow both SmartPort and BLK FORMAT cmd (and check that SP FORMAT only has 1 parameter)
SmartPort Controller:
. Format will just zero all blocks (if not write-protected)
. Write cmd: if write-protected return NOWRITE
. SP Status cmd: 'General Status': set format-allowed & write-protected flags
If HDD image is read-only then support as write-protected.
. On Insert() setup m_bWriteProtected flag correctly
Added new SmartPort Harddisk Controller (HDC) firmware for Enhanced //e. (@burniouf)
. remove the old DOSMaster entrypoints.
. firmware ID byte (at $FE) defaults to 4 ProDOS block devices (was 2 with older v2 f/w).
Enhanced //e defaults to using SP f/w, and older Apple II's still use the older v2 f/w.
Support up to 8 units per HDC (currently limited to 4GiB capacity for each unit).
Save-state: save HDC firmware in state file.
New slot-specific switches to configure each HDC's firmware: -s<N> -hdc-[sp|bm2|bm4].
New switch to select old non-SP firmware for all HDCs: -hdc-firmware-v2.
* New command line option to force a size for autoexpanding use.
* New HDD Controller firmware uses a separate v2 name and folder.
* Harddisk.cpp now loads HDD Controller firmware v2 by default.
* Save-state for 'Generic HDD' bumped to v4
