Added new SmartPort Harddisk Controller (HDC) firmware for Enhanced //e. (@burniouf)
. remove the old DOSMaster entrypoints.
. firmware ID byte (at $FE) defaults to 4 ProDOS block devices (was 2 with older v2 f/w).
Enhanced //e defaults to using SP f/w, and older Apple II's still use the older v2 f/w.
Support up to 8 units per HDC (currently limited to 4GiB capacity for each unit).
Save-state: save HDC firmware in state file.
New slot-specific switches to configure each HDC's firmware: -s<N> -hdc-[sp|bm2|bm4].
New switch to select old non-SP firmware for all HDCs: -hdc-firmware-v2.
. Command line config only, and only permitted in slot 3 for now.
. Save-state Unit v9: Extended: memory (added 'Last Slot to Set Main Mem LC', 'MMU LC Mode').
. Add LanguageCardManager class.
Mockingboard or Phasor cards can be inserted into any slot.
Change Config->Sound to that slots 4+5 to be individually selected for the 3 soundcard types.
Add MockingboardCardManager class to manage multiple cards and mix the sound buffers.
Changes:
- Add a drop-down menu to the 'Advanced' tab that lets the user select a dongle in use
- Add a new file "CopyProtectionDongles.cpp" that is a place to put drivers for these.
- Add a driver for the one known dongle we have now - Speed Star
- Modify Joystick.cpp to allow PB0-PB2 to be "pushed" by the protection dongle.
. In 2x windowed mode: always show slot 5 Disk II LEDs.
. Add tooltips for slot 5/6 track/sector info (d1 & d2) - shows dec/hex & fractional track position.
- but this track/sector info is now on a UI toggle in the Config -> Disk tab.
. Debugger: add 'DISK SLOT n' - to set current slot of Disk II card
- ie. support 'DISK INFO' for slot 5
Uthernet II: add extended feature to virtualise DNS requests.
. This allows pure TCP/UDP sockets to run *without* MACRAW requests (and so without libpcap).
. Raw sockets will not work.
. Add configuration for Virtual DNS.
libpcap: ensure all functions check if the library is loaded before using it.
Uthernet 1: do NOT overwrite tfe_cannot_use as it should only reflect the availability of npcap on *this* system.
Add Copyright notice, and mention Virtual DNS in html.
1) Remove Init()
2) Call Reset() via CardManager
3) Call Destroy() via CardManager (only used by Disks/Harddisk) on WM_DESTROY
The only "real" changes are in CSuperSerialCard: ensure destructor cleans up and remove Destroy().
. tfe.cpp renamed to Uthernet1.cpp.
. add class NetworkBackend: common to both U1 and U2 cards, and abstracts Windows/Linux backends.
. modernise error message if WPCAP.DLL is not installed.
. don't load floppy/harddisk images (in Registry's Config) if also loading a save-state via cmd-line.
. done to prevent MessageBox alerts when deleted disk images can't be found.
Info: Registry contains refs to disk images, but on test clean-up, the images get deleted.
Support VidHD in slot 3 (via Config GUI or '-s3 vidhd') for SHR video modes only.
- AppleWin window is slightly enlarged when VidHD card is inserted.
Support IIgs 320x200 (and fill mode) and 640x200 video modes.
Debugger: add 'shr' command to view video
CUI: Allow user to specify width & height (for full-screen); and allow separate x,y scaling in full-screen mode.
. Add user-protection when unchecking HDD controller (as images aren't restored on a 'cancel')
. Fix possible crash when removing (via Config->Disk) either Disk2 card(s5) or HDD card(s7), then cancelling during emulation
. Fix m_buf[] size
Initially all cards are removed before loading save-state.
Use new Registry "Configuration/Slot 2" location to save SSC's port name.
Use new Registry "Configuration/Slot 7" location to save HDV's image names.
Use new Registry "Configuration/Slot n" (and "Configuration/Slot Auxiliary") locations to save all other card types.
Command line: -s<slot> (eg. -s7 empty) now get persisted to the Registry.
Only update 'HDV Starting Directory' for slot7 & drive1.
Support these new cards in slots 3, 4 or 5; based on code from Lukazi.
- extend Configuration's Input prop sheet page.
- add save/load snapshot for both cards.
- add command line switch for alt controller type (for SNES MAX card).
Change to using Registry's 'Configuration\Slot 3' for slot 3 cards (Uthernet, 4Play & SNES MAX).
Update help doc.
Change to using Registry's 'Configuration\Slot n' for disk ii image pathnames (was 'Preferences').
Delete Registry's 'Configuration\Slot n' section each time there's a change of card.
Add same functionality to conf.ini.
LoadConfiguration(): load from the new Slot-n section (or otherwise the old legacy key).
Only update Registry's 'Starting Directory' for s6,d1.
Update help doc.
* Make Uthernet settings behave like all other cards.
Fix as well the fact that the Uthernet interface would not be reapplied after a restart.
* Uthernet: use consistent types to reduce code complexity.
Use std::string everywhere.
. simplify the interface FrameBase to make it easier to implement it for different cases (remove HDC and make parameters more explicit)
. remove functions which are only called on a Win32Frame (in which case a cast is guaranteed to succeed)
. otherwise there is the risk that every FrameBase implementation wants to add its own variants.
. FrameBase::FrameRefreshStatus() simplify implementation: pass all flags explicitly
. class hierarchy: WinVideo IS_A Video (ie. WinVideo is a subclass of Video)
. GetVideo() singleton instance of WinVideo in AppleWin.cpp, exposed via Interface.h
* Interface.h: ensure that functions in the interface are not exported by other header files.
This is generally harmless, except for the presence of default arguments, in which case the version with default arguments must come first.
To avoid the issue, these functions are only ever exported in the Interface.h header file.
This is not complete as header files from Windows/.. are still included in:
Keyboard.cpp
SerialComms.cpp
Joystick.cpp
But probably these are arch specific and will have to be completely reimplemented elsewhere.
. Split AppleWin -> Core with the functionality really needed by the emulator.
. Split AppleWin -> Utilities for generic code not called by other emulator components.
. Split AppleWin -> CmdLine for the command line option parsing.
