Added new SmartPort Harddisk Controller (HDC) firmware for Enhanced //e. (@burniouf)
. remove the old DOSMaster entrypoints.
. firmware ID byte (at $FE) defaults to 4 ProDOS block devices (was 2 with older v2 f/w).
Enhanced //e defaults to using SP f/w, and older Apple II's still use the older v2 f/w.
Support up to 8 units per HDC (currently limited to 4GiB capacity for each unit).
Save-state: save HDC firmware in state file.
New slot-specific switches to configure each HDC's firmware: -s<N> -hdc-[sp|bm2|bm4].
New switch to select old non-SP firmware for all HDCs: -hdc-firmware-v2.
. A phoneme will continue playing back infinitely; unless the phoneme is changed or CTL=1.
. Reset doesn't affect SSI263/SC01 (so phonemes continue to play).
. CTL=1 sets "PD" (Power Down / "standby") mode, also set at power-on.
. CTL=0 brings device out of "PD" mode, the mode will be set to DR1,DR0 and the phoneme P5-P0 will play.
. Setting mode to DR1:0 = %00 just disables A/!R (ie. disables interrupts), but otherwise retains the previous DR1:0 mode.
. RESET is not connected to !PD/!RST pin 18.
. Support edge-case where RESET can enable ints & assert IRQ.
. Power-on: PD=1 (so D7=0), reg4 (Filter Freq)=0xFF.
. Support SSI263 IRQ and D7 on a Phasor mode change (including Echo+).
. $Csxx I/O mapping (same for Mockingboard and Phasor mode).
Other:
. SSI263 save-state: support SC01 as a sub-unit of the card.
. 6522: Fix reg $F (ORA w/HS) to be identical to reg $1 (ORA).
. Command line config only, and only permitted in slot 3 for now.
. Save-state Unit v9: Extended: memory (added 'Last Slot to Set Main Mem LC', 'MMU LC Mode').
. Add LanguageCardManager class.
* New command line option to force a size for autoexpanding use.
* New HDD Controller firmware uses a separate v2 name and folder.
* Harddisk.cpp now loads HDD Controller firmware v2 by default.
* Save-state for 'Generic HDD' bumped to v4
* SerialComms: compilation in linux.
1) static variables must be defined (otherwise it becomes optimisation-dependent)
2) ensure the socket is closed if an error is detected
* SerialComms: avoid issues with order of global variables.
GetFrame() and the GetCardMgr() use global variables and the order of their destructor is not well defined.
CSuperSerialCard::CommTcpSerialCleanup() is called as part of the CardManager's destructor.
. for scripts that can be loaded: output script pathname to console.
. for scripts that can't be loaded: don't truncate pathname that's output to console.
. specifically for the DebuggerAutoRun.txt script (which runs at AppleWin start-up)
. internally changed MAX_ARG_LEN from 127 to MAX_PATH(260), which is used to size Arg_t::sArg[]
