AppleWin/source/Disk.cpp

2014 lines
61 KiB
C++

/*
AppleWin : An Apple //e emulator for Windows
Copyright (C) 1994-1996, Michael O'Brien
Copyright (C) 1999-2001, Oliver Schmidt
Copyright (C) 2002-2005, Tom Charlesworth
Copyright (C) 2006-2019, Tom Charlesworth, Michael Pohoreski, Nick Westgate
AppleWin is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
AppleWin is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with AppleWin; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/* Description: Disk
*
* Author: Various
*
* In comments, UTAIIe is an abbreviation for a reference to "Understanding the Apple //e" by James Sather
*/
#include "StdAfx.h"
#include "SaveState_Structs_v1.h"
#include "Applewin.h"
#include "CPU.h"
#include "Disk.h"
#include "DiskImage.h"
#include "Frame.h"
#include "Log.h"
#include "Memory.h"
#include "Registry.h"
#include "Video.h"
#include "YamlHelper.h"
#include "../resource/resource.h"
// About m_enhanceDisk:
// . In general m_enhanceDisk==false is used for authentic disk access speed, whereas m_enhanceDisk==true is for enhanced speed.
// Details:
// . if false: Used by ImageReadTrack() to skew the sectors in a track (for .do, .dsk, .po 5.25" images).
// . if true && m_floppyMotorOn, then this is a condition for full-speed (unthrottled) emulation mode.
// . if false && I/O ReadWrite($C0EC) && drive is spinning, then advance the track buffer's nibble index (to simulate spinning).
// . if I/O ReadWrite($C0EC) && read, then depending on true/false support partial nibble reads for different gaps between consecutive accesses.
// Also m_enhanceDisk is persisted to the save-state, so it's an attribute of the DiskII interface card.
Disk2InterfaceCard::Disk2InterfaceCard(void)
{
ResetSwitches();
m_floppyLatch = 0;
m_saveDiskImage = true; // Save the DiskImage name to Registry
m_slot = 0;
m_diskLastCycle = 0;
m_diskLastReadLatchCycle = 0;
m_enhanceDisk = true;
ResetLogicStateSequencer();
// Debug:
#if LOG_DISK_NIBBLES_USE_RUNTIME_VAR
m_bLogDisk_NibblesRW = false;
#endif
#if LOG_DISK_NIBBLES_WRITE
m_uWriteLastCycle = 0;
m_uSyncFFCount = 0;
#endif
}
bool Disk2InterfaceCard::GetEnhanceDisk(void) { return m_enhanceDisk; }
void Disk2InterfaceCard::SetEnhanceDisk(bool bEnhanceDisk) { m_enhanceDisk = bEnhanceDisk; }
int Disk2InterfaceCard::GetCurrentDrive(void) { return m_currDrive; }
int Disk2InterfaceCard::GetCurrentTrack(void) { return ImagePhaseToTrack(m_floppyDrive[m_currDrive].m_disk.m_imagehandle, m_floppyDrive[m_currDrive].m_phasePrecise, false); }
float Disk2InterfaceCard::GetCurrentPhase(void) { return m_floppyDrive[m_currDrive].m_phasePrecise; }
int Disk2InterfaceCard::GetCurrentOffset(void) { return m_floppyDrive[m_currDrive].m_disk.m_byte; }
BYTE Disk2InterfaceCard::GetCurrentLSSBitMask(void) { return m_floppyDrive[m_currDrive].m_disk.m_bitMask; }
double Disk2InterfaceCard::GetCurrentExtraCycles(void) { return m_floppyDrive[m_currDrive].m_disk.m_extraCycles; }
int Disk2InterfaceCard::GetTrack(const int drive) { return ImagePhaseToTrack(m_floppyDrive[drive].m_disk.m_imagehandle, m_floppyDrive[drive].m_phasePrecise, false); }
std::string Disk2InterfaceCard::GetCurrentTrackString(void)
{
const UINT trackInt = (UINT)(m_floppyDrive[m_currDrive].m_phasePrecise / 2);
const float trackFrac = (m_floppyDrive[m_currDrive].m_phasePrecise / 2) - (float)trackInt;
char szInt[8] = "";
sprintf(szInt, "%02X", trackInt); // "$NN"
char szFrac[8] = "";
sprintf(szFrac, "%.02f", trackFrac); // "0.nn"
return std::string(szInt) + std::string(szFrac+1);
}
std::string Disk2InterfaceCard::GetCurrentPhaseString(void)
{
const UINT phaseInt = (UINT)(m_floppyDrive[m_currDrive].m_phasePrecise);
const float phaseFrac = m_floppyDrive[m_currDrive].m_phasePrecise - (float)phaseInt;
char szInt[8] = "";
sprintf(szInt, "%02X", phaseInt); // "$NN"
char szFrac[8] = "";
sprintf(szFrac, "%.02f", phaseFrac); // "0.nn"
return std::string(szInt) + std::string(szFrac+1);
}
LPCTSTR Disk2InterfaceCard::GetCurrentState(void)
{
if (m_floppyDrive[m_currDrive].m_disk.m_imagehandle == NULL)
return "Empty";
if (!m_floppyMotorOn)
{
if (m_floppyDrive[m_currDrive].m_spinning > 0)
return "Off (spinning)";
else
return "Off";
}
else if (m_floppyWriteMode)
{
if (m_floppyDrive[m_currDrive].m_disk.m_bWriteProtected)
return "Writing (write protected)";
else
return "Writing";
}
else
{
/*if (m_floppyLoadMode)
{
if (m_floppyDrive[m_currDrive].disk.bWriteProtected)
return "Reading write protect state (write protected)";
else
return "Reading write protect state (not write protected)";
}
else*/
return "Reading";
}
}
//===========================================================================
void Disk2InterfaceCard::LoadLastDiskImage(const int drive)
{
_ASSERT(drive == DRIVE_1 || drive == DRIVE_2);
const TCHAR *pRegKey = (drive == DRIVE_1)
? TEXT(REGVALUE_PREF_LAST_DISK_1)
: TEXT(REGVALUE_PREF_LAST_DISK_2);
TCHAR sFilePath[MAX_PATH];
if (RegLoadString(TEXT(REG_PREFS), pRegKey, 1, sFilePath, MAX_PATH, TEXT("")))
{
m_saveDiskImage = false;
// Pass in ptr to local copy of filepath, since RemoveDisk() sets DiskPathFilename = ""
InsertDisk(drive, sFilePath, IMAGE_USE_FILES_WRITE_PROTECT_STATUS, IMAGE_DONT_CREATE);
m_saveDiskImage = true;
}
}
//===========================================================================
void Disk2InterfaceCard::SaveLastDiskImage(const int drive)
{
_ASSERT(drive == DRIVE_1 || drive == DRIVE_2);
if (!m_saveDiskImage)
return;
const TCHAR *pFileName = m_floppyDrive[drive].m_disk.m_fullname;
if (drive == DRIVE_1)
RegSaveString(TEXT(REG_PREFS), TEXT(REGVALUE_PREF_LAST_DISK_1), TRUE, pFileName);
else
RegSaveString(TEXT(REG_PREFS), TEXT(REGVALUE_PREF_LAST_DISK_2), TRUE, pFileName);
//
TCHAR szPathName[MAX_PATH];
StringCbCopy(szPathName, MAX_PATH, DiskGetFullPathName(drive));
TCHAR* slash = _tcsrchr(szPathName, TEXT('\\'));
if (slash != NULL)
{
slash[1] = '\0';
RegSaveString(TEXT(REG_PREFS), TEXT(REGVALUE_PREF_START_DIR), 1, szPathName);
}
}
//===========================================================================
// Called by ControlMotor() & Enable()
void Disk2InterfaceCard::CheckSpinning(const ULONG uExecutedCycles)
{
DWORD modechange = (m_floppyMotorOn && !m_floppyDrive[m_currDrive].m_spinning);
if (m_floppyMotorOn)
m_floppyDrive[m_currDrive].m_spinning = SPINNING_CYCLES;
if (modechange)
FrameDrawDiskLEDS( (HDC)0 );
if (modechange)
{
// Set m_diskLastCycle when motor changes: not spinning (ie. off for 1 sec) -> on
CpuCalcCycles(uExecutedCycles);
m_diskLastCycle = g_nCumulativeCycles;
}
}
//===========================================================================
Disk_Status_e Disk2InterfaceCard::GetDriveLightStatus(const int drive)
{
if (IsDriveValid( drive ))
{
FloppyDrive* pDrive = &m_floppyDrive[ drive ];
if (pDrive->m_spinning)
{
if (pDrive->m_disk.m_bWriteProtected)
return DISK_STATUS_PROT;
if (pDrive->m_writelight)
return DISK_STATUS_WRITE;
else
return DISK_STATUS_READ;
}
else
{
return DISK_STATUS_OFF;
}
}
return DISK_STATUS_OFF;
}
//===========================================================================
bool Disk2InterfaceCard::IsDriveValid(const int drive)
{
return (drive >= 0 && drive < NUM_DRIVES);
}
//===========================================================================
void Disk2InterfaceCard::AllocTrack(const int drive)
{
FloppyDisk* pFloppy = &m_floppyDrive[drive].m_disk;
pFloppy->m_trackimage = (LPBYTE)VirtualAlloc(NULL, NIBBLES_PER_TRACK, MEM_COMMIT, PAGE_READWRITE);
}
//===========================================================================
void Disk2InterfaceCard::ReadTrack(const int drive, ULONG uExecutedCycles)
{
if (! IsDriveValid( drive ))
return;
FloppyDrive* pDrive = &m_floppyDrive[ drive ];
FloppyDisk* pFloppy = &pDrive->m_disk;
if (ImagePhaseToTrack(pFloppy->m_imagehandle, pDrive->m_phasePrecise, false) >= ImageGetNumTracks(pFloppy->m_imagehandle))
{
_ASSERT(0); // What can cause this? Add a comment to replace this assert.
pFloppy->m_trackimagedata = false;
return;
}
if (!pFloppy->m_trackimage)
AllocTrack( drive );
if (pFloppy->m_trackimage && pFloppy->m_imagehandle)
{
#if LOG_DISK_TRACKS
CpuCalcCycles(uExecutedCycles);
const ULONG cycleDelta = (ULONG)(g_nCumulativeCycles - pDrive->m_lastStepperCycle);
LOG_DISK("track $%s read (time since last stepper %.3fms)\r\n", GetCurrentTrackString().c_str(), ((float)cycleDelta) / (CLK_6502_NTSC / 1000.0));
#endif
const UINT32 currentPosition = pFloppy->m_byte;
const UINT32 currentTrackLength = pFloppy->m_nibbles;
ImageReadTrack(
pFloppy->m_imagehandle,
pDrive->m_phasePrecise,
pFloppy->m_trackimage,
&pFloppy->m_nibbles,
&pFloppy->m_bitCount,
m_enhanceDisk);
if (!ImageIsWOZ(pFloppy->m_imagehandle) || (currentTrackLength == 0))
{
pFloppy->m_byte = 0;
}
else
{
_ASSERT(pFloppy->m_nibbles && pFloppy->m_bitCount);
if (pFloppy->m_nibbles == 0 || pFloppy->m_bitCount == 0)
{
pFloppy->m_nibbles = 1;
pFloppy->m_bitCount = 8;
}
pFloppy->m_byte = (currentPosition * pFloppy->m_nibbles) / currentTrackLength; // Ref: WOZ-1.01
if (pFloppy->m_byte == (pFloppy->m_nibbles-1)) // Last nibble may not be complete, so advance by 1 nibble
pFloppy->m_byte = 0;
pFloppy->m_bitOffset = pFloppy->m_byte*8;
pFloppy->m_bitMask = 1 << 7;
pFloppy->m_extraCycles = 0.0;
pDrive->m_headWindow = 0;
}
pFloppy->m_trackimagedata = (pFloppy->m_nibbles != 0);
}
}
//===========================================================================
void Disk2InterfaceCard::RemoveDisk(const int drive)
{
FloppyDisk* pFloppy = &m_floppyDrive[drive].m_disk;
if (pFloppy->m_imagehandle)
{
FlushCurrentTrack(drive);
ImageClose(pFloppy->m_imagehandle);
pFloppy->m_imagehandle = NULL;
}
if (pFloppy->m_trackimage)
{
VirtualFree(pFloppy->m_trackimage, 0, MEM_RELEASE);
pFloppy->m_trackimage = NULL;
pFloppy->m_trackimagedata = false;
}
memset( pFloppy->m_imagename, 0, MAX_DISK_IMAGE_NAME+1 );
memset( pFloppy->m_fullname , 0, MAX_DISK_FULL_NAME +1 );
pFloppy->m_strFilenameInZip = "";
SaveLastDiskImage( drive );
Video_ResetScreenshotCounter( NULL );
}
//===========================================================================
void Disk2InterfaceCard::WriteTrack(const int drive)
{
FloppyDrive* pDrive = &m_floppyDrive[ drive ];
FloppyDisk* pFloppy = &pDrive->m_disk;
if (ImagePhaseToTrack(pFloppy->m_imagehandle, pDrive->m_phasePrecise, false) >= ImageGetNumTracks(pFloppy->m_imagehandle))
{
_ASSERT(0); // What can cause this? Add a comment to replace this assert.
return;
}
if (pFloppy->m_bWriteProtected)
return;
if (pFloppy->m_trackimage && pFloppy->m_imagehandle)
{
#if LOG_DISK_TRACKS
LOG_DISK("track $%s write\r\n", GetCurrentTrackString().c_str());
#endif
ImageWriteTrack(
pFloppy->m_imagehandle,
pDrive->m_phasePrecise,
pFloppy->m_trackimage,
pFloppy->m_nibbles);
}
pFloppy->m_trackimagedirty = false;
}
void Disk2InterfaceCard::FlushCurrentTrack(const int drive)
{
FloppyDisk* pFloppy = &m_floppyDrive[drive].m_disk;
if (pFloppy->m_trackimage && pFloppy->m_trackimagedirty)
WriteTrack(drive);
}
//===========================================================================
void Disk2InterfaceCard::Boot(void)
{
// THIS FUNCTION RELOADS A PROGRAM IMAGE IF ONE IS LOADED IN DRIVE ONE.
// IF A DISK IMAGE OR NO IMAGE IS LOADED IN DRIVE ONE, IT DOES NOTHING.
if (m_floppyDrive[0].m_disk.m_imagehandle && ImageBoot(m_floppyDrive[0].m_disk.m_imagehandle))
m_floppyMotorOn = 0;
}
//===========================================================================
void __stdcall Disk2InterfaceCard::ControlMotor(WORD, WORD address, BYTE, BYTE, ULONG uExecutedCycles)
{
BOOL newState = address & 1;
if (newState != m_floppyMotorOn) // motor changed state
m_formatTrack.DriveNotWritingTrack();
m_floppyMotorOn = newState;
// NB. Motor off doesn't reset the Command Decoder like reset. (UTAIIe figures 9.7 & 9.8 chip C2)
// - so it doesn't reset this state: m_floppyLoadMode, m_floppyWriteMode, m_magnetStates
#if LOG_DISK_MOTOR
LOG_DISK("motor %s\r\n", (m_floppyMotorOn) ? "on" : "off");
#endif
CheckSpinning(uExecutedCycles);
}
//===========================================================================
void __stdcall Disk2InterfaceCard::ControlStepper(WORD, WORD address, BYTE, BYTE, ULONG uExecutedCycles)
{
FloppyDrive* pDrive = &m_floppyDrive[m_currDrive];
FloppyDisk* pFloppy = &pDrive->m_disk;
if (!m_floppyMotorOn) // GH#525
{
if (!pDrive->m_spinning)
{
#if LOG_DISK_PHASES
LOG_DISK("stepper accessed whilst motor is off and not spinning\r\n");
#endif
return;
}
#if LOG_DISK_PHASES
LOG_DISK("stepper accessed whilst motor is off, but still spinning\r\n");
#endif
}
// update phases (magnet states)
{
const int phase = (address >> 1) & 3;
const int phase_bit = (1 << phase);
// update the magnet states
if (address & 1)
m_magnetStates |= phase_bit; // phase on
else
m_magnetStates &= ~phase_bit; // phase off
}
CpuCalcCycles(uExecutedCycles);
#if LOG_DISK_PHASES
const ULONG cycleDelta = (ULONG)(g_nCumulativeCycles - pDrive->m_lastStepperCycle);
#endif
pDrive->m_lastStepperCycle = g_nCumulativeCycles;
// check for any stepping effect from a magnet
// - move only when the magnet opposite the cog is off
// - move in the direction of an adjacent magnet if one is on
// - do not move if both adjacent magnets are on (ie. quarter track)
// momentum and timing are not accounted for ... maybe one day!
int direction = 0;
if (m_magnetStates & (1 << ((pDrive->m_phase + 1) & 3)))
direction += 1;
if (m_magnetStates & (1 << ((pDrive->m_phase + 3) & 3)))
direction -= 1;
// Only calculate quarterDirection for WOZ, as NIB/DSK don't support half phases.
int quarterDirection = 0;
if (ImageIsWOZ(pFloppy->m_imagehandle))
{
if ((m_magnetStates == 0xC || // 1100
m_magnetStates == 0x6 || // 0110
m_magnetStates == 0x3 || // 0011
m_magnetStates == 0x9)) // 1001
{
quarterDirection = direction;
direction = 0;
}
}
pDrive->m_phase = MAX(0, MIN(79, pDrive->m_phase + direction));
float newPhasePrecise = (float)(pDrive->m_phase) + (float)quarterDirection * 0.5f;
if (newPhasePrecise < 0)
newPhasePrecise = 0;
// apply magnet step, if any
if (newPhasePrecise != pDrive->m_phasePrecise)
{
FlushCurrentTrack(m_currDrive);
pDrive->m_phasePrecise = newPhasePrecise;
pFloppy->m_trackimagedata = false;
m_formatTrack.DriveNotWritingTrack();
FrameDrawDiskStatus((HDC)0); // Show track status (GH#201)
}
#if LOG_DISK_PHASES
LOG_DISK("track $%s magnet-states %d%d%d%d phase %d %s address $%4X last-stepper %.3fms\r\n",
GetCurrentTrackString().c_str(),
(m_magnetStates >> 3) & 1,
(m_magnetStates >> 2) & 1,
(m_magnetStates >> 1) & 1,
(m_magnetStates >> 0) & 1,
(address >> 1) & 3, // phase
(address & 1) ? "on " : "off",
address,
((float)cycleDelta)/(CLK_6502_NTSC/1000.0));
#endif
}
//===========================================================================
void Disk2InterfaceCard::Destroy(void)
{
m_saveDiskImage = false;
RemoveDisk(DRIVE_1);
m_saveDiskImage = false;
RemoveDisk(DRIVE_2);
m_saveDiskImage = true;
}
//===========================================================================
void __stdcall Disk2InterfaceCard::Enable(WORD, WORD address, BYTE, BYTE, ULONG uExecutedCycles)
{
m_currDrive = address & 1;
#if LOG_DISK_ENABLE_DRIVE
LOG_DISK("enable drive: %d\r\n", m_currDrive);
#endif
m_floppyDrive[!m_currDrive].m_spinning = 0;
m_floppyDrive[!m_currDrive].m_writelight = 0;
CheckSpinning(uExecutedCycles);
}
//===========================================================================
void Disk2InterfaceCard::EjectDisk(const int drive)
{
if (IsDriveValid(drive))
{
RemoveDisk(drive);
}
}
//===========================================================================
// Return the filename
// . Used by Drive Buttons' tooltips
LPCTSTR Disk2InterfaceCard::GetFullDiskFilename(const int drive)
{
if (!m_floppyDrive[drive].m_disk.m_strFilenameInZip.empty())
return m_floppyDrive[drive].m_disk.m_strFilenameInZip.c_str();
return GetFullName(drive);
}
// Return the file or zip name
// . Used by Property Sheet Page (Disk)
LPCTSTR Disk2InterfaceCard::GetFullName(const int drive)
{
return m_floppyDrive[drive].m_disk.m_fullname;
}
// Return the imagename
// . Used by Drive Button's icons & Property Sheet Page (Save snapshot)
LPCTSTR Disk2InterfaceCard::GetBaseName(const int drive)
{
return m_floppyDrive[drive].m_disk.m_imagename;
}
LPCTSTR Disk2InterfaceCard::DiskGetFullPathName(const int drive)
{
return ImageGetPathname(m_floppyDrive[drive].m_disk.m_imagehandle);
}
//===========================================================================
void Disk2InterfaceCard::GetLightStatus(Disk_Status_e *pDisk1Status, Disk_Status_e *pDisk2Status)
{
if (pDisk1Status)
*pDisk1Status = GetDriveLightStatus(DRIVE_1);
if (pDisk2Status)
*pDisk2Status = GetDriveLightStatus(DRIVE_2);
}
//===========================================================================
ImageError_e Disk2InterfaceCard::InsertDisk(const int drive, LPCTSTR pszImageFilename, const bool bForceWriteProtected, const bool bCreateIfNecessary)
{
FloppyDrive* pDrive = &m_floppyDrive[drive];
FloppyDisk* pFloppy = &pDrive->m_disk;
if (pFloppy->m_imagehandle)
RemoveDisk(drive);
// Reset the disk's attributes, but preserve the drive's attributes (GH#138/Platoon, GH#640)
// . Changing the disk (in the drive) doesn't affect the drive's attributes.
pFloppy->clear();
const DWORD dwAttributes = GetFileAttributes(pszImageFilename);
if(dwAttributes == INVALID_FILE_ATTRIBUTES)
pFloppy->m_bWriteProtected = false; // Assume this is a new file to create
else
pFloppy->m_bWriteProtected = bForceWriteProtected ? true : (dwAttributes & FILE_ATTRIBUTE_READONLY);
// Check if image is being used by the other drive, and if so remove it in order so it can be swapped
{
const char* pszOtherPathname = DiskGetFullPathName(!drive);
char szCurrentPathname[MAX_PATH];
DWORD uNameLen = GetFullPathName(pszImageFilename, MAX_PATH, szCurrentPathname, NULL);
if (uNameLen == 0 || uNameLen >= MAX_PATH)
strcpy_s(szCurrentPathname, MAX_PATH, pszImageFilename);
if (!strcmp(pszOtherPathname, szCurrentPathname))
{
EjectDisk(!drive);
FrameRefreshStatus(DRAW_LEDS | DRAW_BUTTON_DRIVES);
}
}
ImageError_e Error = ImageOpen(pszImageFilename,
&pFloppy->m_imagehandle,
&pFloppy->m_bWriteProtected,
bCreateIfNecessary,
pFloppy->m_strFilenameInZip);
if (Error == eIMAGE_ERROR_NONE && ImageIsMultiFileZip(pFloppy->m_imagehandle))
{
TCHAR szText[100+MAX_PATH];
StringCbPrintf(szText, sizeof(szText), "Only the first file in a multi-file zip is supported\nUse disk image '%s' ?", pFloppy->m_strFilenameInZip.c_str());
int nRes = MessageBox(g_hFrameWindow, szText, TEXT("Multi-Zip Warning"), MB_ICONWARNING | MB_YESNO | MB_SETFOREGROUND);
if (nRes == IDNO)
{
RemoveDisk(drive);
Error = eIMAGE_ERROR_REJECTED_MULTI_ZIP;
}
}
if (Error == eIMAGE_ERROR_NONE)
{
GetImageTitle(pszImageFilename, pFloppy->m_imagename, pFloppy->m_fullname);
Video_ResetScreenshotCounter(pFloppy->m_imagename);
}
else
{
Video_ResetScreenshotCounter(NULL);
}
SaveLastDiskImage(drive);
return Error;
}
//===========================================================================
bool Disk2InterfaceCard::IsConditionForFullSpeed(void)
{
return m_floppyMotorOn && m_enhanceDisk;
}
//===========================================================================
void Disk2InterfaceCard::NotifyInvalidImage(const int drive, LPCTSTR pszImageFilename, const ImageError_e Error)
{
TCHAR szBuffer[MAX_PATH + 128];
switch (Error)
{
case eIMAGE_ERROR_UNABLE_TO_OPEN:
case eIMAGE_ERROR_UNABLE_TO_OPEN_GZ:
case eIMAGE_ERROR_UNABLE_TO_OPEN_ZIP:
StringCbPrintf(
szBuffer,
MAX_PATH + 128,
TEXT("Unable to open the file %s."),
pszImageFilename);
break;
case eIMAGE_ERROR_BAD_SIZE:
StringCbPrintf(
szBuffer,
MAX_PATH + 128,
TEXT("Unable to use the file %s\nbecause the ")
TEXT("disk image is an unsupported size."),
pszImageFilename);
break;
case eIMAGE_ERROR_BAD_FILE:
StringCbPrintf(
szBuffer,
MAX_PATH + 128,
TEXT("Unable to use the file %s\nbecause the ")
TEXT("OS can't access it."),
pszImageFilename);
break;
case eIMAGE_ERROR_UNSUPPORTED:
StringCbPrintf(
szBuffer,
MAX_PATH + 128,
TEXT("Unable to use the file %s\nbecause the ")
TEXT("disk image format is not recognized."),
pszImageFilename);
break;
case eIMAGE_ERROR_UNSUPPORTED_HDV:
StringCbPrintf(
szBuffer,
MAX_PATH + 128,
TEXT("Unable to use the file %s\n")
TEXT("because this UniDisk 3.5/Apple IIGS/hard-disk image is not supported.\n")
TEXT("Try inserting as a hard-disk image instead."),
pszImageFilename);
break;
case eIMAGE_ERROR_UNSUPPORTED_MULTI_ZIP:
StringCbPrintf(
szBuffer,
MAX_PATH + 128,
TEXT("Unable to use the file %s\nbecause the ")
TEXT("first file (%s) in this multi-zip archive is not recognized.\n")
TEXT("Try unzipping and using the disk images directly.\n"),
pszImageFilename,
m_floppyDrive[drive].m_disk.m_strFilenameInZip.c_str());
break;
case eIMAGE_ERROR_GZ:
case eIMAGE_ERROR_ZIP:
StringCbPrintf(
szBuffer,
MAX_PATH + 128,
TEXT("Unable to use the compressed file %s\nbecause the ")
TEXT("compressed disk image is corrupt/unsupported."),
pszImageFilename);
break;
case eIMAGE_ERROR_FAILED_TO_GET_PATHNAME:
StringCbPrintf(
szBuffer,
MAX_PATH + 128,
TEXT("Unable to GetFullPathName() for the file: %s."),
pszImageFilename);
break;
case eIMAGE_ERROR_ZEROLENGTH_WRITEPROTECTED:
StringCbPrintf(
szBuffer,
MAX_PATH + 128,
TEXT("Unsupported zero-length write-protected file: %s."),
pszImageFilename);
break;
case eIMAGE_ERROR_FAILED_TO_INIT_ZEROLENGTH:
StringCbPrintf(
szBuffer,
MAX_PATH + 128,
TEXT("Failed to resize the zero-length file: %s."),
pszImageFilename);
break;
default:
// IGNORE OTHER ERRORS SILENTLY
return;
}
MessageBox(
g_hFrameWindow,
szBuffer,
g_pAppTitle,
MB_ICONEXCLAMATION | MB_SETFOREGROUND);
}
//===========================================================================
bool Disk2InterfaceCard::GetProtect(const int drive)
{
if (IsDriveValid(drive))
{
if (m_floppyDrive[drive].m_disk.m_bWriteProtected)
return true;
}
return false;
}
//===========================================================================
void Disk2InterfaceCard::SetProtect(const int drive, const bool bWriteProtect)
{
if (IsDriveValid( drive ))
{
m_floppyDrive[drive].m_disk.m_bWriteProtected = bWriteProtect;
}
}
//===========================================================================
bool Disk2InterfaceCard::IsDiskImageWriteProtected(const int drive)
{
if (!IsDriveValid(drive))
return true;
return ImageIsWriteProtected(m_floppyDrive[drive].m_disk.m_imagehandle);
}
//===========================================================================
bool Disk2InterfaceCard::IsDriveEmpty(const int drive)
{
if (!IsDriveValid(drive))
return true;
return m_floppyDrive[drive].m_disk.m_imagehandle == NULL;
}
//===========================================================================
#if LOG_DISK_NIBBLES_WRITE
bool Disk2InterfaceCard::LogWriteCheckSyncFF(ULONG& uCycleDelta)
{
bool bIsSyncFF = false;
if (m_uWriteLastCycle == 0) // Reset to 0 when write mode is enabled
{
uCycleDelta = 0;
if (m_floppyLatch == 0xFF)
{
m_uSyncFFCount = 0;
bIsSyncFF = true;
}
}
else
{
uCycleDelta = (ULONG) (g_nCumulativeCycles - m_uWriteLastCycle);
if (m_floppyLatch == 0xFF && uCycleDelta > 32)
{
m_uSyncFFCount++;
bIsSyncFF = true;
}
}
m_uWriteLastCycle = g_nCumulativeCycles;
return bIsSyncFF;
}
#endif
//===========================================================================
void __stdcall Disk2InterfaceCard::ReadWrite(WORD pc, WORD addr, BYTE bWrite, BYTE d, ULONG uExecutedCycles)
{
/* m_floppyLoadMode = 0; */
FloppyDrive* pDrive = &m_floppyDrive[m_currDrive];
FloppyDisk* pFloppy = &pDrive->m_disk;
if (!pFloppy->m_trackimagedata && pFloppy->m_imagehandle)
ReadTrack(m_currDrive, uExecutedCycles);
if (!pFloppy->m_trackimagedata)
{
m_floppyLatch = 0xFF;
return;
}
// Improve precision of "authentic" drive mode - GH#125
UINT uSpinNibbleCount = 0;
CpuCalcCycles(uExecutedCycles); // g_nCumulativeCycles required for uSpinNibbleCount & LogWriteCheckSyncFF()
if (!m_enhanceDisk && pDrive->m_spinning)
{
const ULONG nCycleDiff = (ULONG) (g_nCumulativeCycles - m_diskLastCycle);
m_diskLastCycle = g_nCumulativeCycles;
if (nCycleDiff > 40)
{
// 40 cycles for a write of a 10-bit 0xFF sync byte
uSpinNibbleCount = nCycleDiff >> 5; // ...but divide by 32 (not 40)
ULONG uWrapOffset = uSpinNibbleCount % pFloppy->m_nibbles;
pFloppy->m_byte += uWrapOffset;
if (pFloppy->m_byte >= pFloppy->m_nibbles)
pFloppy->m_byte -= pFloppy->m_nibbles;
#if LOG_DISK_NIBBLES_SPIN
UINT uCompleteRevolutions = uSpinNibbleCount / pFloppy->m_nibbles;
LOG_DISK("spin: revs=%d, nibbles=%d\r\n", uCompleteRevolutions, uWrapOffset);
#endif
}
}
if (!m_floppyWriteMode)
{
// Don't change latch if drive off after 1 second drive-off delay (UTAIIe page 9-13)
// "DRIVES OFF forces the data register to hold its present state." (UTAIIe page 9-12)
// Note: Sherwood Forest sets shift mode and reads with the drive off.
if (!pDrive->m_spinning) // GH#599
return;
const ULONG nReadCycleDiff = (ULONG) (g_nCumulativeCycles - m_diskLastReadLatchCycle);
// Support partial nibble read if disk reads are very close: (GH#582)
// . 6 cycles (1st->2nd read) for DOS 3.3 / $BD34: "read with delays to see if disk is spinning." (Beneath Apple DOS)
// . 6 cycles (1st->2nd read) for Curse of the Azure Bonds (loop to see if disk is spinning)
// . 31 cycles is the max for a partial 8-bit nibble
const ULONG kReadAccessThreshold = m_enhanceDisk ? 6 : 31;
if (nReadCycleDiff <= kReadAccessThreshold)
{
UINT invalidBits = 8 - (nReadCycleDiff / 4); // 4 cycles per bit-cell
m_floppyLatch = *(pFloppy->m_trackimage + pFloppy->m_byte) >> invalidBits;
return; // Early return so don't update: m_diskLastReadLatchCycle & pFloppy->byte
}
m_floppyLatch = *(pFloppy->m_trackimage + pFloppy->m_byte);
m_diskLastReadLatchCycle = g_nCumulativeCycles;
#if LOG_DISK_NIBBLES_READ
#if LOG_DISK_NIBBLES_USE_RUNTIME_VAR
if (m_bLogDisk_NibblesRW)
#endif
{
LOG_DISK("read %04X = %02X\r\n", pFloppy->m_byte, m_floppyLatch);
}
m_formatTrack.DecodeLatchNibbleRead(m_floppyLatch);
#endif
}
else if (!pFloppy->m_bWriteProtected) // && m_floppyWriteMode
{
if (!pDrive->m_spinning)
return; // If not spinning then only 1 bit-cell gets written?
*(pFloppy->m_trackimage + pFloppy->m_byte) = m_floppyLatch;
pFloppy->m_trackimagedirty = true;
bool bIsSyncFF = false;
#if LOG_DISK_NIBBLES_WRITE
ULONG uCycleDelta = 0;
bIsSyncFF = LogWriteCheckSyncFF(uCycleDelta);
#endif
m_formatTrack.DecodeLatchNibbleWrite(m_floppyLatch, uSpinNibbleCount, pFloppy, bIsSyncFF); // GH#125
#if LOG_DISK_NIBBLES_WRITE
#if LOG_DISK_NIBBLES_USE_RUNTIME_VAR
if (m_bLogDisk_NibblesRW)
#endif
{
if (!bIsSyncFF)
LOG_DISK("write %04X = %02X (cy=+%d)\r\n", pFloppy->m_byte, m_floppyLatch, uCycleDelta);
else
LOG_DISK("write %04X = %02X (cy=+%d) sync #%d\r\n", pFloppy->m_byte, m_floppyLatch, uCycleDelta, m_uSyncFFCount);
}
#endif
}
if (++pFloppy->m_byte >= pFloppy->m_nibbles)
pFloppy->m_byte = 0;
// Show track status (GH#201) - NB. Prevent flooding of forcing UI to redraw!!!
if ((pFloppy->m_byte & 0xFF) == 0)
FrameDrawDiskStatus( (HDC)0 );
}
//===========================================================================
void Disk2InterfaceCard::ResetLogicStateSequencer(void)
{
m_shiftReg = 0;
m_latchDelay = 0;
m_resetSequencer = true;
m_dbgLatchDelayedCnt = 0;
}
void Disk2InterfaceCard::UpdateBitStreamPositionAndDiskCycle(const ULONG uExecutedCycles)
{
FloppyDisk& floppy = m_floppyDrive[m_currDrive].m_disk;
CpuCalcCycles(uExecutedCycles);
const UINT bitCellDelta = GetBitCellDelta(ImageGetOptimalBitTiming(floppy.m_imagehandle));
UpdateBitStreamPosition(floppy, bitCellDelta);
m_diskLastCycle = g_nCumulativeCycles;
}
UINT Disk2InterfaceCard::GetBitCellDelta(const BYTE optimalBitTiming)
{
FloppyDisk& floppy = m_floppyDrive[m_currDrive].m_disk;
// NB. m_extraCycles is needed to retain accuracy:
// . Read latch #1: 0-> 9: cycleDelta= 9, bitCellDelta=2, extraCycles=1
// . Read latch #2: 9->20: cycleDelta=11, bitCellDelta=2, extraCycles=3
// . Overall: 0->20: cycleDelta=20, bitCellDelta=5, extraCycles=0
UINT bitCellDelta;
#if 0
if (optimalBitTiming == 32)
{
const ULONG cycleDelta = (ULONG)(g_nCumulativeCycles - m_diskLastCycle) + (BYTE) m_extraCycles;
bitCellDelta = cycleDelta / 4; // DIV 4 for 4us per bit-cell
m_extraCycles = cycleDelta & 3; // MOD 4 : remainder carried forward for next time
}
else
#endif
{
const double cycleDelta = (double)(g_nCumulativeCycles - m_diskLastCycle) + floppy.m_extraCycles;
const double bitTime = 0.125 * (double)optimalBitTiming; // 125ns units
bitCellDelta = (UINT) floor( cycleDelta / bitTime );
floppy.m_extraCycles = (double)cycleDelta - ((double)bitCellDelta * bitTime);
}
return bitCellDelta;
}
void Disk2InterfaceCard::UpdateBitStreamPosition(FloppyDisk& floppy, const ULONG bitCellDelta)
{
_ASSERT(floppy.m_bitCount); // Should never happen - ReadTrack() will handle this
if (floppy.m_bitCount == 0)
return;
floppy.m_bitOffset += bitCellDelta;
if (floppy.m_bitOffset >= floppy.m_bitCount)
floppy.m_bitOffset %= floppy.m_bitCount;
UpdateBitStreamOffsets(floppy);
}
void Disk2InterfaceCard::UpdateBitStreamOffsets(FloppyDisk& floppy)
{
floppy.m_byte = floppy.m_bitOffset / 8;
const UINT remainder = 7 - (floppy.m_bitOffset & 7);
floppy.m_bitMask = 1 << remainder;
}
void __stdcall Disk2InterfaceCard::DataLatchReadWriteWOZ(WORD pc, WORD addr, BYTE bWrite, BYTE d, ULONG uExecutedCycles)
{
/* m_floppyLoadMode = 0; */
FloppyDrive& drive = m_floppyDrive[m_currDrive];
FloppyDisk& floppy = drive.m_disk;
if (!floppy.m_trackimagedata && floppy.m_imagehandle)
ReadTrack(m_currDrive, uExecutedCycles);
if (!floppy.m_trackimagedata)
{
_ASSERT(0); // Can't happen for WOZ - ReadTrack() should return an empty track
m_floppyLatch = 0xFF;
return;
}
// Don't change latch if drive off after 1 second drive-off delay (UTAIIe page 9-13)
// "DRIVES OFF forces the data register to hold its present state." (UTAIIe page 9-12)
// Note: Sherwood Forest sets shift mode and reads with the drive off.
// TODO: And same for a write?
if (!drive.m_spinning) // GH#599
return;
CpuCalcCycles(uExecutedCycles);
// Skipping forward a large amount of bitcells means the bitstream will very likely be out-of-sync.
// The first 1-bit will produce a latch nibble, and this 1-bit is unlikely to be the nibble's high bit.
// So we need to ensure we run enough bits through the sequencer to re-sync.
// NB. For Planetfall 13 bitcells(NG) / 14 bitcells(OK)
const UINT significantBitCells = 50; // 5x 10-bit sync FF nibbles
UINT bitCellDelta = GetBitCellDelta(ImageGetOptimalBitTiming(floppy.m_imagehandle));
UINT bitCellRemainder;
if (bitCellDelta <= significantBitCells)
{
bitCellRemainder = bitCellDelta;
}
else
{
bitCellRemainder = significantBitCells;
bitCellDelta -= significantBitCells;
UpdateBitStreamPosition(floppy, bitCellDelta);
m_latchDelay = 0;
}
m_diskLastCycle = g_nCumulativeCycles;
if (!bWrite)
DataLatchReadWOZ(pc, addr, bitCellRemainder);
else
DataLatchWriteWOZ(pc, addr, d, bitCellRemainder);
// Show track status (GH#201) - NB. Prevent flooding of forcing UI to redraw!!!
if ((floppy.m_byte & 0xFF) == 0)
FrameDrawDiskStatus((HDC)0);
}
void Disk2InterfaceCard::DataLatchReadWOZ(WORD pc, WORD addr, UINT bitCellRemainder)
{
// m_diskLastReadLatchCycle = g_nCumulativeCycles; // Not used by WOZ (only by NIB)
#if LOG_DISK_NIBBLES_READ
bool newLatchData = false;
#endif
FloppyDrive& drive = m_floppyDrive[m_currDrive];
FloppyDisk& floppy = drive.m_disk;
#if _DEBUG
static int dbgWOZ = 0;
if (dbgWOZ)
{
DumpSectorWOZ(floppy);
//DumpTrackWOZ(floppy); // Enable as necessary
}
#endif
for (UINT i = 0; i < bitCellRemainder; i++)
{
BYTE n = floppy.m_trackimage[floppy.m_byte];
drive.m_headWindow <<= 1;
drive.m_headWindow |= (n & floppy.m_bitMask) ? 1 : 0;
BYTE outputBit = (drive.m_headWindow & 0xf) ? (drive.m_headWindow >> 1) & 1
: rand() & 1;
floppy.m_bitMask >>= 1;
if (!floppy.m_bitMask)
{
floppy.m_bitMask = 1 << 7;
floppy.m_byte++;
}
floppy.m_bitOffset++;
if (floppy.m_bitOffset == floppy.m_bitCount)
{
floppy.m_bitMask = 1 << 7;
floppy.m_bitOffset = 0;
floppy.m_byte = 0;
}
if (m_resetSequencer)
{
m_resetSequencer = false; // LSS takes some cycles to reset (ref?)
continue;
}
//
m_shiftReg <<= 1;
m_shiftReg |= outputBit;
if (m_latchDelay)
{
m_latchDelay -= 4;
if (m_latchDelay < 0)
m_latchDelay = 0;
if (m_shiftReg)
{
m_dbgLatchDelayedCnt = 0;
}
else // m_shiftReg==0
{
m_latchDelay += 4; // extend by 4us (so 7us again) - GH#662
m_dbgLatchDelayedCnt++;
#if LOG_DISK_NIBBLES_READ
if (m_dbgLatchDelayedCnt >= 3)
{
LOG_DISK("read: latch held due to 0: PC=%04X, cnt=%02X\r\n", regs.pc, m_dbgLatchDelayedCnt);
}
#endif
}
}
if (!m_latchDelay)
{
#if LOG_DISK_NIBBLES_READ
if (newLatchData)
{
LOG_DISK("read skipped latch data: %04X = %02X\r\n", floppy.m_byte, m_floppyLatch);
newLatchData = false;
}
#endif
m_floppyLatch = m_shiftReg;
if (m_shiftReg & 0x80)
{
m_latchDelay = 7;
m_shiftReg = 0;
#if LOG_DISK_NIBBLES_READ
// May not actually be read by 6502 (eg. Prologue's CHKSUM 4&4 nibble pair), but still pass to the log's nibble reader
m_formatTrack.DecodeLatchNibbleRead(m_floppyLatch);
newLatchData = true;
#endif
}
}
}
#if LOG_DISK_NIBBLES_READ
if (m_floppyLatch & 0x80)
{
#if LOG_DISK_NIBBLES_USE_RUNTIME_VAR
if (m_bLogDisk_NibblesRW)
#endif
{
LOG_DISK("read %04X = %02X\r\n", floppy.m_byte, m_floppyLatch);
}
}
#endif
}
void Disk2InterfaceCard::DataLatchWriteWOZ(WORD pc, WORD addr, BYTE d, UINT bitCellRemainder)
{
_ASSERT(m_floppyWriteMode);
FloppyDrive& drive = m_floppyDrive[m_currDrive];
FloppyDisk& floppy = drive.m_disk;
if (!floppy.m_bWriteProtected)
{
//TODO
}
}
//===========================================================================
#ifdef _DEBUG
// Dump nibbles from current position until 0xDEAA (ie. data epilogue)
void Disk2InterfaceCard::DumpSectorWOZ(FloppyDisk floppy) // pass a copy of m_floppy
{
BYTE shiftReg = 0;
UINT32 lastNibbles = 0;
UINT zeroCount = 0;
UINT nibbleCount = 0;
while (1)
{
BYTE n = floppy.m_trackimage[floppy.m_byte];
BYTE outputBit = (n & floppy.m_bitMask) ? 1 : 0;
floppy.m_bitMask >>= 1;
if (!floppy.m_bitMask)
{
floppy.m_bitMask = 1 << 7;
floppy.m_byte++;
}
floppy.m_bitOffset++;
if (floppy.m_bitOffset == floppy.m_bitCount)
{
floppy.m_bitMask = 1 << 7;
floppy.m_bitOffset = 0;
floppy.m_byte = 0;
}
if (shiftReg == 0 && outputBit == 0)
{
zeroCount++;
continue;
}
shiftReg <<= 1;
shiftReg |= outputBit;
if ((shiftReg & 0x80) == 0)
continue;
nibbleCount++;
char str[10];
sprintf(str, "%02X ", shiftReg);
OutputDebugString(str);
if ((nibbleCount & 0xf) == 0)
OutputDebugString("\n");
lastNibbles <<= 8;
lastNibbles |= shiftReg;
if ((lastNibbles & 0xffff) == 0xDEAA)
break;
shiftReg = 0;
zeroCount = 0;
}
}
// Dump nibbles from current position bitstream wraps to same position
void Disk2InterfaceCard::DumpTrackWOZ(FloppyDisk floppy) // pass a copy of m_floppy
{
#ifdef LOG_DISK_NIBBLES_READ
FormatTrack formatTrack;
#endif
BYTE shiftReg = 0;
UINT nibbleCount = 0;
floppy.m_bitMask = 1 << 7;
floppy.m_bitOffset = 0;
floppy.m_byte = 0;
const UINT startBitOffset = floppy.m_bitOffset;
while (1)
{
BYTE n = floppy.m_trackimage[floppy.m_byte];
BYTE outputBit = (n & floppy.m_bitMask) ? 1 : 0;
floppy.m_bitMask >>= 1;
if (!floppy.m_bitMask)
{
floppy.m_bitMask = 1 << 7;
floppy.m_byte++;
}
floppy.m_bitOffset++;
if (floppy.m_bitOffset == floppy.m_bitCount)
{
floppy.m_bitMask = 1 << 7;
floppy.m_bitOffset = 0;
floppy.m_byte = 0;
}
if (startBitOffset == floppy.m_bitOffset)
break;
if (shiftReg == 0 && outputBit == 0)
continue;
shiftReg <<= 1;
shiftReg |= outputBit;
if ((shiftReg & 0x80) == 0)
continue;
nibbleCount++;
TCHAR str[10];
StringCbPrintf(str, 10, "%02X ", shiftReg);
OutputDebugString(str);
if ((nibbleCount % 32) == 0)
OutputDebugString("\n");
#ifdef LOG_DISK_NIBBLES_READ
formatTrack.DecodeLatchNibbleRead(shiftReg);
#endif
shiftReg = 0;
}
}
#endif
//===========================================================================
void Disk2InterfaceCard::Reset(const bool bIsPowerCycle/*=false*/)
{
// RESET forces all switches off (UTAIIe Table 9.1)
ResetSwitches();
m_formatTrack.Reset();
ResetLogicStateSequencer();
if (bIsPowerCycle) // GH#460
{
// NB. This doesn't affect the drive head (ie. drive's track position)
// . The initial machine start-up state is track=0, but after a power-cycle the track could be any value.
// . (For DiskII firmware, this results in a subtle extra latch read in this latter case, for the track!=0 case)
m_floppyDrive[DRIVE_1].m_spinning = 0;
m_floppyDrive[DRIVE_1].m_writelight = 0;
m_floppyDrive[DRIVE_2].m_spinning = 0;
m_floppyDrive[DRIVE_2].m_writelight = 0;
FrameRefreshStatus(DRAW_LEDS, false);
}
}
void Disk2InterfaceCard::ResetSwitches(void)
{
m_currDrive = 0;
m_floppyMotorOn = 0;
m_floppyLoadMode = 0;
m_floppyWriteMode = 0;
m_magnetStates = 0;
}
//===========================================================================
bool Disk2InterfaceCard::UserSelectNewDiskImage(const int drive, LPCSTR pszFilename/*=""*/)
{
TCHAR directory[MAX_PATH];
TCHAR filename[MAX_PATH];
TCHAR title[40];
StringCbCopy(filename, MAX_PATH, pszFilename);
RegLoadString(TEXT(REG_PREFS), REGVALUE_PREF_START_DIR, 1, directory, MAX_PATH, TEXT(""));
StringCbPrintf(title, 40, TEXT("Select Disk Image For Drive %d"), drive + 1);
_ASSERT(sizeof(OPENFILENAME) == sizeof(OPENFILENAME_NT4)); // Required for Win98/ME support (selected by _WIN32_WINNT=0x0400 in stdafx.h)
OPENFILENAME ofn;
ZeroMemory(&ofn,sizeof(OPENFILENAME));
ofn.lStructSize = sizeof(OPENFILENAME);
ofn.hwndOwner = g_hFrameWindow;
ofn.hInstance = g_hInstance;
ofn.lpstrFilter = TEXT("All Images\0*.bin;*.do;*.dsk;*.nib;*.po;*.gz;*.woz;*.zip;*.2mg;*.2img;*.iie;*.apl\0")
TEXT("Disk Images (*.bin,*.do,*.dsk,*.nib,*.po,*.gz,*.woz,*.zip,*.2mg,*.2img,*.iie)\0*.bin;*.do;*.dsk;*.nib;*.po;*.gz;*.woz;*.zip;*.2mg;*.2img;*.iie\0")
TEXT("All Files\0*.*\0");
ofn.lpstrFile = filename;
ofn.nMaxFile = MAX_PATH;
ofn.lpstrInitialDir = directory;
ofn.Flags = OFN_PATHMUSTEXIST;
ofn.lpstrTitle = title;
bool bRes = false;
if (GetOpenFileName(&ofn))
{
if ((!ofn.nFileExtension) || !filename[ofn.nFileExtension])
StringCbCat(filename, MAX_PATH, TEXT(".dsk"));
ImageError_e Error = InsertDisk(drive, filename, ofn.Flags & OFN_READONLY, IMAGE_CREATE);
if (Error == eIMAGE_ERROR_NONE)
{
bRes = true;
}
else
{
NotifyInvalidImage(drive, filename, Error);
}
}
return bRes;
}
//===========================================================================
void __stdcall Disk2InterfaceCard::LoadWriteProtect(WORD, WORD, BYTE write, BYTE value, ULONG uExecutedCycles)
{
/* m_floppyLoadMode = 1; */
// Don't change latch if drive off after 1 second drive-off delay (UTAIIe page 9-13)
// "DRIVES OFF forces the data register to hold its present state." (UTAIIe page 9-12)
// Note: Gemstone Warrior sets load mode with the drive off.
if (!m_floppyDrive[m_currDrive].m_spinning) // GH#599
return;
if (!write)
{
// Notes:
// . Phase 1 on also forces write protect in the Disk II drive (UTAIIe page 9-7) but we don't implement that
// . write mode doesn't prevent reading write protect (GH#537):
// "If for some reason the above write protect check were entered with the READ/WRITE switch in WRITE,
// the write protect switch would still be read correctly" (UTAIIe page 9-21)
// . Sequencer "SR" (Shift Right) command only loads QA (bit7) of data register (UTAIIe page 9-21)
if (m_floppyDrive[m_currDrive].m_disk.m_bWriteProtected)
m_floppyLatch |= 0x80;
else
m_floppyLatch &= 0x7F;
}
if (ImageIsWOZ(m_floppyDrive[m_currDrive].m_disk.m_imagehandle))
{
#if LOG_DISK_NIBBLES_READ
LOG_DISK("reset LSS: ~PC=%04X\r\n", regs.pc);
#endif
ResetLogicStateSequencer(); // reset sequencer (Ref: WOZ-1.01)
// m_latchDelay = 7; // TODO: Treat like a regular $C0EC latch load?
UpdateBitStreamPositionAndDiskCycle(uExecutedCycles); // Fix E7-copy protection
}
}
//===========================================================================
void __stdcall Disk2InterfaceCard::SetReadMode(WORD, WORD, BYTE, BYTE, ULONG)
{
m_floppyWriteMode = 0;
m_formatTrack.DriveSwitchedToReadMode(&m_floppyDrive[m_currDrive].m_disk);
#if LOG_DISK_RW_MODE
LOG_DISK("rw mode: read\r\n");
#endif
}
//===========================================================================
void __stdcall Disk2InterfaceCard::SetWriteMode(WORD, WORD, BYTE, BYTE, ULONG uExecutedCycles)
{
m_floppyWriteMode = 1;
m_formatTrack.DriveSwitchedToWriteMode(m_floppyDrive[m_currDrive].m_disk.m_byte);
BOOL modechange = !m_floppyDrive[m_currDrive].m_writelight;
#if LOG_DISK_RW_MODE
LOG_DISK("rw mode: write (mode changed=%d)\r\n", modechange ? 1 : 0);
#endif
#if LOG_DISK_NIBBLES_WRITE
m_uWriteLastCycle = 0;
#endif
m_floppyDrive[m_currDrive].m_writelight = WRITELIGHT_CYCLES;
if (modechange)
FrameDrawDiskLEDS( (HDC)0 );
}
//===========================================================================
void Disk2InterfaceCard::UpdateDriveState(DWORD cycles)
{
int loop = NUM_DRIVES;
while (loop--)
{
FloppyDrive* pDrive = &m_floppyDrive[loop];
if (pDrive->m_spinning && !m_floppyMotorOn)
{
if (!(pDrive->m_spinning -= MIN(pDrive->m_spinning, cycles)))
{
FrameDrawDiskLEDS( (HDC)0 );
FrameDrawDiskStatus( (HDC)0 );
}
}
if (m_floppyWriteMode && (m_currDrive == loop) && pDrive->m_spinning)
{
pDrive->m_writelight = WRITELIGHT_CYCLES;
}
else if (pDrive->m_writelight)
{
if (!(pDrive->m_writelight -= MIN(pDrive->m_writelight, cycles)))
{
FrameDrawDiskLEDS( (HDC)0 );
FrameDrawDiskStatus( (HDC)0 );
}
}
}
}
//===========================================================================
bool Disk2InterfaceCard::DriveSwap(void)
{
// Refuse to swap if either Disk][ is active
// TODO: if Shift-Click then FORCE drive swap to bypass message
if (m_floppyDrive[DRIVE_1].m_spinning || m_floppyDrive[DRIVE_2].m_spinning)
{
// 1.26.2.4 Prompt when trying to swap disks while drive is on instead of silently failing
int status = MessageBox(
g_hFrameWindow,
"WARNING:\n"
"\n"
"\tAttempting to swap a disk while a drive is on\n"
"\t\t--> is NOT recommended <--\n"
"\tas this will most likely read/write incorrect data!\n"
"\n"
"If the other drive is empty then swapping is harmless. The"
" computer will appear to 'hang' trying to read non-existent data but"
" you can safely swap disks once more to restore the original disk.\n"
"\n"
"Do you still wish to swap disks?",
"Trying to swap a disk while a drive is on ...",
MB_ICONWARNING | MB_YESNOCANCEL
);
switch( status )
{
case IDNO:
case IDCANCEL:
return false;
default:
break; // User is OK with swapping disks so let them proceed at their own risk
}
}
FlushCurrentTrack(DRIVE_1);
FlushCurrentTrack(DRIVE_2);
// Swap disks between drives
// . NB. We swap trackimage ptrs (so don't need to swap the buffers' data)
std::swap(m_floppyDrive[DRIVE_1].m_disk, m_floppyDrive[DRIVE_2].m_disk);
// Invalidate the trackimage so that a read latch will re-read the track for the new floppy (GH#543)
m_floppyDrive[DRIVE_1].m_disk.m_trackimagedata = false;
m_floppyDrive[DRIVE_2].m_disk.m_trackimagedata = false;
SaveLastDiskImage(DRIVE_1);
SaveLastDiskImage(DRIVE_2);
FrameRefreshStatus(DRAW_LEDS | DRAW_BUTTON_DRIVES, false);
return true;
}
//===========================================================================
// TODO: LoadRom_Disk_Floppy()
void Disk2InterfaceCard::Initialize(LPBYTE pCxRomPeripheral, UINT uSlot)
{
const UINT DISK2_FW_SIZE = APPLE_SLOT_SIZE;
HRSRC hResInfo = FindResource(NULL, MAKEINTRESOURCE(IDR_DISK2_FW), "FIRMWARE");
if(hResInfo == NULL)
return;
DWORD dwResSize = SizeofResource(NULL, hResInfo);
if(dwResSize != DISK2_FW_SIZE)
return;
HGLOBAL hResData = LoadResource(NULL, hResInfo);
if(hResData == NULL)
return;
BYTE* pData = (BYTE*) LockResource(hResData); // NB. Don't need to unlock resource
if(pData == NULL)
return;
memcpy(pCxRomPeripheral + uSlot*APPLE_SLOT_SIZE, pData, DISK2_FW_SIZE);
// Note: We used to disable the track stepping delay in the Disk II controller firmware by
// patching $C64C with $A9,$00,$EA. Now not doing this since:
// . Authentic Speed should be authentic
// . Enhanced Speed runs emulation unthrottled, so removing the delay has negligible effect
// . Patching the firmware breaks the ADC checksum used by "The CIA Files" (Tricky Dick)
// . In this case we can patch to compensate for an ADC or EOR checksum but not both (nickw)
RegisterIoHandler(uSlot, &Disk2InterfaceCard::IORead, &Disk2InterfaceCard::IOWrite, NULL, NULL, this, NULL);
m_slot = uSlot;
}
//===========================================================================
BYTE __stdcall Disk2InterfaceCard::IORead(WORD pc, WORD addr, BYTE bWrite, BYTE d, ULONG nExecutedCycles)
{
UINT uSlot = ((addr & 0xff) >> 4) - 8;
Disk2InterfaceCard* pCard = (Disk2InterfaceCard*) MemGetSlotParameters(uSlot);
ImageInfo* pImage = pCard->m_floppyDrive[pCard->m_currDrive].m_disk.m_imagehandle;
bool isWOZ = ImageIsWOZ(pImage);
switch (addr & 0xF)
{
case 0x0: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x1: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x2: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x3: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x4: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x5: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x6: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x7: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x8: pCard->ControlMotor(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x9: pCard->ControlMotor(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xA: pCard->Enable(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xB: pCard->Enable(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xC: if (!isWOZ) pCard->ReadWrite(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xD: pCard->LoadWriteProtect(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xE: pCard->SetReadMode(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xF: pCard->SetWriteMode(pc, addr, bWrite, d, nExecutedCycles); break;
}
// only even addresses return the latch (UTAIIe Table 9.1)
if (!(addr & 1))
{
if (isWOZ)
pCard->DataLatchReadWriteWOZ(pc, addr, bWrite, d, nExecutedCycles);
return pCard->m_floppyLatch;
}
return MemReadFloatingBus(nExecutedCycles);
}
BYTE __stdcall Disk2InterfaceCard::IOWrite(WORD pc, WORD addr, BYTE bWrite, BYTE d, ULONG nExecutedCycles)
{
UINT uSlot = ((addr & 0xff) >> 4) - 8;
Disk2InterfaceCard* pCard = (Disk2InterfaceCard*) MemGetSlotParameters(uSlot);
ImageInfo* pImage = pCard->m_floppyDrive[pCard->m_currDrive].m_disk.m_imagehandle;
bool isWOZ = ImageIsWOZ(pImage);
switch (addr & 0xF)
{
case 0x0: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x1: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x2: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x3: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x4: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x5: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x6: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x7: pCard->ControlStepper(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x8: pCard->ControlMotor(pc, addr, bWrite, d, nExecutedCycles); break;
case 0x9: pCard->ControlMotor(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xA: pCard->Enable(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xB: pCard->Enable(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xC: if (!isWOZ) pCard->ReadWrite(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xD: pCard->LoadWriteProtect(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xE: pCard->SetReadMode(pc, addr, bWrite, d, nExecutedCycles); break;
case 0xF: pCard->SetWriteMode(pc, addr, bWrite, d, nExecutedCycles); break;
}
// any address writes the latch via sequencer LD command (74LS323 datasheet)
if (pCard->m_floppyWriteMode /* && m_floppyLoadMode */)
{
pCard->m_floppyLatch = d;
if (isWOZ)
pCard->DataLatchReadWriteWOZ(pc, addr, bWrite, d, nExecutedCycles);
}
return 0;
}
//===========================================================================
// Unit version history:
// 2: Added: Format Track state & DiskLastCycle
// 3: Added: DiskLastReadLatchCycle
// 4: Added: WOZ state
// Split up 'Unit' putting some state into a new 'Floppy'
static const UINT kUNIT_VERSION = 4;
#define SS_YAML_VALUE_CARD_DISK2 "Disk]["
#define SS_YAML_KEY_PHASES "Phases"
#define SS_YAML_KEY_CURRENT_DRIVE "Current Drive"
#define SS_YAML_KEY_DISK_ACCESSED "Disk Accessed"
#define SS_YAML_KEY_ENHANCE_DISK "Enhance Disk"
#define SS_YAML_KEY_FLOPPY_LATCH "Floppy Latch"
#define SS_YAML_KEY_FLOPPY_MOTOR_ON "Floppy Motor On"
#define SS_YAML_KEY_FLOPPY_WRITE_MODE "Floppy Write Mode"
#define SS_YAML_KEY_LAST_CYCLE "Last Cycle"
#define SS_YAML_KEY_LAST_READ_LATCH_CYCLE "Last Read Latch Cycle"
#define SS_YAML_KEY_LSS_SHIFT_REG "LSS Shift Reg"
#define SS_YAML_KEY_LSS_LATCH_DELAY "LSS Latch Delay"
#define SS_YAML_KEY_LSS_RESET_SEQUENCER "LSS Reset Sequencer"
#define SS_YAML_KEY_DISK2UNIT "Unit"
#define SS_YAML_KEY_FILENAME "Filename"
#define SS_YAML_KEY_PHASE "Phase"
#define SS_YAML_KEY_PHASE_PRECISE "Phase (precise)"
#define SS_YAML_KEY_TRACK "Track" // deprecated at v4
#define SS_YAML_KEY_HEAD_WINDOW "Head Window"
#define SS_YAML_KEY_LAST_STEPPER_CYCLE "Last Stepper Cycle"
#define SS_YAML_KEY_FLOPPY "Floppy"
#define SS_YAML_KEY_BYTE "Byte"
#define SS_YAML_KEY_NIBBLES "Nibbles"
#define SS_YAML_KEY_BIT_OFFSET "Bit Offset"
#define SS_YAML_KEY_BIT_COUNT "Bit Count"
#define SS_YAML_KEY_EXTRA_CYCLES "Extra Cycles"
#define SS_YAML_KEY_WRITE_PROTECTED "Write Protected"
#define SS_YAML_KEY_SPINNING "Spinning"
#define SS_YAML_KEY_WRITE_LIGHT "Write Light"
#define SS_YAML_KEY_TRACK_IMAGE_DATA "Track Image Data"
#define SS_YAML_KEY_TRACK_IMAGE_DIRTY "Track Image Dirty"
#define SS_YAML_KEY_TRACK_IMAGE "Track Image"
std::string Disk2InterfaceCard::GetSnapshotCardName(void)
{
static const std::string name(SS_YAML_VALUE_CARD_DISK2);
return name;
}
void Disk2InterfaceCard::SaveSnapshotFloppy(YamlSaveHelper& yamlSaveHelper, UINT unit)
{
YamlSaveHelper::Label label(yamlSaveHelper, "%s:\n", SS_YAML_KEY_FLOPPY);
yamlSaveHelper.SaveString(SS_YAML_KEY_FILENAME, m_floppyDrive[unit].m_disk.m_fullname);
yamlSaveHelper.SaveHexUint16(SS_YAML_KEY_BYTE, m_floppyDrive[unit].m_disk.m_byte);
yamlSaveHelper.SaveHexUint16(SS_YAML_KEY_NIBBLES, m_floppyDrive[unit].m_disk.m_nibbles);
yamlSaveHelper.SaveHexUint32(SS_YAML_KEY_BIT_OFFSET, m_floppyDrive[unit].m_disk.m_bitOffset); // v4
yamlSaveHelper.SaveHexUint32(SS_YAML_KEY_BIT_COUNT, m_floppyDrive[unit].m_disk.m_bitCount); // v4
yamlSaveHelper.SaveDouble(SS_YAML_KEY_EXTRA_CYCLES, m_floppyDrive[unit].m_disk.m_extraCycles); // v4
yamlSaveHelper.SaveBool(SS_YAML_KEY_WRITE_PROTECTED, m_floppyDrive[unit].m_disk.m_bWriteProtected);
yamlSaveHelper.SaveUint(SS_YAML_KEY_TRACK_IMAGE_DATA, m_floppyDrive[unit].m_disk.m_trackimagedata);
yamlSaveHelper.SaveUint(SS_YAML_KEY_TRACK_IMAGE_DIRTY, m_floppyDrive[unit].m_disk.m_trackimagedirty);
if (m_floppyDrive[unit].m_disk.m_trackimage)
{
YamlSaveHelper::Label image(yamlSaveHelper, "%s:\n", SS_YAML_KEY_TRACK_IMAGE);
yamlSaveHelper.SaveMemory(m_floppyDrive[unit].m_disk.m_trackimage, NIBBLES_PER_TRACK);
}
}
void Disk2InterfaceCard::SaveSnapshotDriveUnit(YamlSaveHelper& yamlSaveHelper, UINT unit)
{
YamlSaveHelper::Label label(yamlSaveHelper, "%s%d:\n", SS_YAML_KEY_DISK2UNIT, unit);
yamlSaveHelper.SaveUint(SS_YAML_KEY_PHASE, m_floppyDrive[unit].m_phase);
yamlSaveHelper.SaveFloat(SS_YAML_KEY_PHASE_PRECISE, m_floppyDrive[unit].m_phasePrecise); // v4
yamlSaveHelper.SaveHexUint4(SS_YAML_KEY_HEAD_WINDOW, m_floppyDrive[unit].m_headWindow); // v4
yamlSaveHelper.SaveHexUint64(SS_YAML_KEY_LAST_STEPPER_CYCLE, m_floppyDrive[unit].m_lastStepperCycle); // v4
yamlSaveHelper.SaveUint(SS_YAML_KEY_SPINNING, m_floppyDrive[unit].m_spinning);
yamlSaveHelper.SaveUint(SS_YAML_KEY_WRITE_LIGHT, m_floppyDrive[unit].m_writelight);
SaveSnapshotFloppy(yamlSaveHelper, unit);
}
void Disk2InterfaceCard::SaveSnapshot(class YamlSaveHelper& yamlSaveHelper)
{
YamlSaveHelper::Slot slot(yamlSaveHelper, GetSnapshotCardName(), m_slot, kUNIT_VERSION);
YamlSaveHelper::Label state(yamlSaveHelper, "%s:\n", SS_YAML_KEY_STATE);
yamlSaveHelper.SaveUint(SS_YAML_KEY_CURRENT_DRIVE, m_currDrive);
yamlSaveHelper.SaveHexUint4(SS_YAML_KEY_PHASES, m_magnetStates);
yamlSaveHelper.SaveBool(SS_YAML_KEY_DISK_ACCESSED, false); // deprecated
yamlSaveHelper.SaveBool(SS_YAML_KEY_ENHANCE_DISK, m_enhanceDisk);
yamlSaveHelper.SaveHexUint8(SS_YAML_KEY_FLOPPY_LATCH, m_floppyLatch);
yamlSaveHelper.SaveBool(SS_YAML_KEY_FLOPPY_MOTOR_ON, m_floppyMotorOn == TRUE);
yamlSaveHelper.SaveBool(SS_YAML_KEY_FLOPPY_WRITE_MODE, m_floppyWriteMode == TRUE);
yamlSaveHelper.SaveHexUint64(SS_YAML_KEY_LAST_CYCLE, m_diskLastCycle); // v2
yamlSaveHelper.SaveHexUint64(SS_YAML_KEY_LAST_READ_LATCH_CYCLE, m_diskLastReadLatchCycle); // v3
yamlSaveHelper.SaveHexUint8(SS_YAML_KEY_LSS_SHIFT_REG, m_shiftReg); // v4
yamlSaveHelper.SaveInt(SS_YAML_KEY_LSS_LATCH_DELAY, m_latchDelay); // v4
yamlSaveHelper.SaveBool(SS_YAML_KEY_LSS_RESET_SEQUENCER, m_resetSequencer); // v4
m_formatTrack.SaveSnapshot(yamlSaveHelper); // v2
SaveSnapshotDriveUnit(yamlSaveHelper, DRIVE_1);
SaveSnapshotDriveUnit(yamlSaveHelper, DRIVE_2);
}
bool Disk2InterfaceCard::LoadSnapshotFloppy(YamlLoadHelper& yamlLoadHelper, UINT unit, UINT version, std::vector<BYTE>& track)
{
std::string filename = yamlLoadHelper.LoadString(SS_YAML_KEY_FILENAME);
bool bImageError = filename.empty();
if (!bImageError)
{
DWORD dwAttributes = GetFileAttributes(filename.c_str());
if (dwAttributes == INVALID_FILE_ATTRIBUTES)
{
// Get user to browse for file
UserSelectNewDiskImage(unit, filename.c_str());
dwAttributes = GetFileAttributes(filename.c_str());
}
bImageError = (dwAttributes == INVALID_FILE_ATTRIBUTES);
if (!bImageError)
{
if (InsertDisk(unit, filename.c_str(), dwAttributes & FILE_ATTRIBUTE_READONLY, IMAGE_DONT_CREATE) != eIMAGE_ERROR_NONE)
bImageError = true;
// DiskInsert() zeros m_floppyDrive[unit], then sets up:
// . m_imagename
// . m_fullname
// . m_bWriteProtected
}
}
yamlLoadHelper.LoadBool(SS_YAML_KEY_WRITE_PROTECTED); // Consume
m_floppyDrive[unit].m_disk.m_byte = yamlLoadHelper.LoadUint(SS_YAML_KEY_BYTE);
m_floppyDrive[unit].m_disk.m_nibbles = yamlLoadHelper.LoadUint(SS_YAML_KEY_NIBBLES);
m_floppyDrive[unit].m_disk.m_trackimagedata = yamlLoadHelper.LoadUint(SS_YAML_KEY_TRACK_IMAGE_DATA) ? true : false;
m_floppyDrive[unit].m_disk.m_trackimagedirty = yamlLoadHelper.LoadUint(SS_YAML_KEY_TRACK_IMAGE_DIRTY) ? true : false;
if (version >= 4)
{
m_floppyDrive[unit].m_disk.m_bitOffset = yamlLoadHelper.LoadUint(SS_YAML_KEY_BIT_OFFSET);
m_floppyDrive[unit].m_disk.m_bitCount = yamlLoadHelper.LoadUint(SS_YAML_KEY_BIT_COUNT);
m_floppyDrive[unit].m_disk.m_extraCycles = yamlLoadHelper.LoadDouble(SS_YAML_KEY_EXTRA_CYCLES);
if (m_floppyDrive[unit].m_disk.m_bitCount && (m_floppyDrive[unit].m_disk.m_bitOffset >= m_floppyDrive[unit].m_disk.m_bitCount))
throw std::string("Disk image: bitOffset >= bitCount");
if (ImageIsWOZ(m_floppyDrive[unit].m_disk.m_imagehandle))
UpdateBitStreamOffsets(m_floppyDrive[unit].m_disk); // overwrites m_byte, inits m_bitMask
}
if (yamlLoadHelper.GetSubMap(SS_YAML_KEY_TRACK_IMAGE))
{
yamlLoadHelper.LoadMemory(&track[0], NIBBLES_PER_TRACK);
yamlLoadHelper.PopMap();
}
return bImageError;
}
bool Disk2InterfaceCard::LoadSnapshotDriveUnitv3(YamlLoadHelper& yamlLoadHelper, UINT unit, UINT version, std::vector<BYTE>& track)
{
_ASSERT(version <= 3);
std::string disk2UnitName = std::string(SS_YAML_KEY_DISK2UNIT) + (unit == DRIVE_1 ? std::string("0") : std::string("1"));
if (!yamlLoadHelper.GetSubMap(disk2UnitName))
throw std::string("Card: Expected key: ") + disk2UnitName;
bool bImageError = LoadSnapshotFloppy(yamlLoadHelper, unit, version, track);
yamlLoadHelper.LoadUint(SS_YAML_KEY_TRACK); // consume
m_floppyDrive[unit].m_phase = yamlLoadHelper.LoadUint(SS_YAML_KEY_PHASE);
m_floppyDrive[unit].m_phasePrecise = (float) m_floppyDrive[unit].m_phase;
m_floppyDrive[unit].m_spinning = yamlLoadHelper.LoadUint(SS_YAML_KEY_SPINNING);
m_floppyDrive[unit].m_writelight = yamlLoadHelper.LoadUint(SS_YAML_KEY_WRITE_LIGHT);
yamlLoadHelper.PopMap();
return bImageError;
}
bool Disk2InterfaceCard::LoadSnapshotDriveUnitv4(YamlLoadHelper& yamlLoadHelper, UINT unit, UINT version, std::vector<BYTE>& track)
{
_ASSERT(version >= 4);
std::string disk2UnitName = std::string(SS_YAML_KEY_DISK2UNIT) + (unit == DRIVE_1 ? std::string("0") : std::string("1"));
if (!yamlLoadHelper.GetSubMap(disk2UnitName))
throw std::string("Card: Expected key: ") + disk2UnitName;
if (!yamlLoadHelper.GetSubMap(SS_YAML_KEY_FLOPPY))
throw std::string("Card: Expected key: ") + SS_YAML_KEY_FLOPPY;
bool bImageError = LoadSnapshotFloppy(yamlLoadHelper, unit, version, track);
yamlLoadHelper.PopMap();
//
m_floppyDrive[unit].m_phase = yamlLoadHelper.LoadUint(SS_YAML_KEY_PHASE);
m_floppyDrive[unit].m_phasePrecise = yamlLoadHelper.LoadFloat(SS_YAML_KEY_PHASE_PRECISE);
m_floppyDrive[unit].m_headWindow = yamlLoadHelper.LoadUint(SS_YAML_KEY_HEAD_WINDOW) & 0xf;
m_floppyDrive[unit].m_lastStepperCycle = yamlLoadHelper.LoadUint64(SS_YAML_KEY_LAST_STEPPER_CYCLE);
m_floppyDrive[unit].m_spinning = yamlLoadHelper.LoadUint(SS_YAML_KEY_SPINNING);
m_floppyDrive[unit].m_writelight = yamlLoadHelper.LoadUint(SS_YAML_KEY_WRITE_LIGHT);
yamlLoadHelper.PopMap();
return bImageError;
}
void Disk2InterfaceCard::LoadSnapshotDriveUnit(YamlLoadHelper& yamlLoadHelper, UINT unit, UINT version)
{
bool bImageError = false;
std::vector<BYTE> track(NIBBLES_PER_TRACK);
if (version <= 3)
bImageError = LoadSnapshotDriveUnitv3(yamlLoadHelper, unit, version, track);
else
bImageError = LoadSnapshotDriveUnitv4(yamlLoadHelper, unit, version, track);
if (!bImageError)
{
if ((m_floppyDrive[unit].m_disk.m_trackimage == NULL) && m_floppyDrive[unit].m_disk.m_nibbles)
AllocTrack(unit);
if (m_floppyDrive[unit].m_disk.m_trackimage == NULL)
bImageError = true;
else
memcpy(m_floppyDrive[unit].m_disk.m_trackimage, &track[0], NIBBLES_PER_TRACK);
}
if (bImageError)
{
m_floppyDrive[unit].m_disk.m_trackimagedata = false;
m_floppyDrive[unit].m_disk.m_trackimagedirty = false;
m_floppyDrive[unit].m_disk.m_nibbles = 0;
}
}
bool Disk2InterfaceCard::LoadSnapshot(class YamlLoadHelper& yamlLoadHelper, UINT slot, UINT version)
{
if (slot != 6) // fixme
throw std::string("Card: wrong slot");
if (version < 1 || version > kUNIT_VERSION)
throw std::string("Card: wrong version");
m_currDrive = yamlLoadHelper.LoadUint(SS_YAML_KEY_CURRENT_DRIVE);
m_magnetStates = yamlLoadHelper.LoadUint(SS_YAML_KEY_PHASES);
(void) yamlLoadHelper.LoadBool(SS_YAML_KEY_DISK_ACCESSED); // deprecated - but retrieve the value to avoid the "State: Unknown key (Disk Accessed)" warning
m_enhanceDisk = yamlLoadHelper.LoadBool(SS_YAML_KEY_ENHANCE_DISK);
m_floppyLatch = yamlLoadHelper.LoadUint(SS_YAML_KEY_FLOPPY_LATCH);
m_floppyMotorOn = yamlLoadHelper.LoadBool(SS_YAML_KEY_FLOPPY_MOTOR_ON);
m_floppyWriteMode = yamlLoadHelper.LoadBool(SS_YAML_KEY_FLOPPY_WRITE_MODE);
if (version >= 2)
{
m_diskLastCycle = yamlLoadHelper.LoadUint64(SS_YAML_KEY_LAST_CYCLE);
m_formatTrack.LoadSnapshot(yamlLoadHelper);
}
if (version >= 3)
{
m_diskLastReadLatchCycle = yamlLoadHelper.LoadUint64(SS_YAML_KEY_LAST_READ_LATCH_CYCLE);
}
if (version >= 4)
{
m_shiftReg = yamlLoadHelper.LoadUint(SS_YAML_KEY_LSS_SHIFT_REG) & 0xff;
m_latchDelay = yamlLoadHelper.LoadInt(SS_YAML_KEY_LSS_LATCH_DELAY);
m_resetSequencer = yamlLoadHelper.LoadBool(SS_YAML_KEY_LSS_RESET_SEQUENCER);
}
// Eject all disks first in case Drive-2 contains disk to be inserted into Drive-1
for (UINT i=0; i<NUM_DRIVES; i++)
{
EjectDisk(i); // Remove any disk & update Registry to reflect empty drive
m_floppyDrive[i].clear();
}
LoadSnapshotDriveUnit(yamlLoadHelper, DRIVE_1, version);
LoadSnapshotDriveUnit(yamlLoadHelper, DRIVE_2, version);
FrameRefreshStatus(DRAW_LEDS | DRAW_BUTTON_DRIVES);
return true;
}