mirror of
https://github.com/cmosher01/Epple-II.git
synced 2024-12-29 00:31:40 +00:00
64 lines
2.7 KiB
Plaintext
64 lines
2.7 KiB
Plaintext
== Configuration
|
|
|
|
The Epple ][ Emulator is most useful when properly configured.
|
|
After downloading and installing the Epple ][ Program, some System ROM (demo or real), and
|
|
optionally the peripheral card ROMs you want to use, you will need to configure the program.
|
|
Configuring is concerned primarily with telling the program what peripheral cards to use,
|
|
and where the ROM files are located (and what memory addresses to load them at).
|
|
|
|
=== epple2.conf
|
|
The default configuration file for
|
|
the Epple ][ emulator is:
|
|
|
|
---------------------
|
|
/etc/epple2/epple2.conf
|
|
---------------------
|
|
|
|
For Windows, the file will be:
|
|
|
|
---------------------
|
|
C:\Program Files\Epple2\etc\epple2\epple2.conf
|
|
---------------------
|
|
|
|
The configuration file could be in a different location depending upon how
|
|
the distribution package is built.
|
|
|
|
You can specify a different configuration file for the emulator to use by
|
|
specifying its name as the argument when running the epple2 program.
|
|
|
|
The format of the configuration file is just lines of <<commands>>.
|
|
Comments begin with a hash +#+ character, and continue to the end of the line.
|
|
|
|
=== Firmware
|
|
|
|
Firmware, commonly called ROM images or ROMs, will need to be loaded
|
|
into the emulated ROM areas of the emulated Apple
|
|
in order for it to be able to boot the emulated Apple machine.
|
|
The <<firmware>> available is described above.
|
|
Once the firmware image
|
|
files are installed on your computer, you can use the <<import>>
|
|
command in the configuration file to load the image files into the emulator.
|
|
|
|
=== Peripheral Cards
|
|
|
|
Another primary concern for configuring the Epple ][ is the insertion of
|
|
peripheral cards into the Apple's slots. The most useful card is probably the
|
|
Disk ][ Controller card; you will need to insert one of these cards if you want
|
|
to be able to load floppy disk images into the emulated Apple. The various
|
|
types of cards available are described in the <<cards>> section.
|
|
You can use the <<slot>> command in the configuration file to insert
|
|
them into the Apple's slots.
|
|
|
|
=== Sample Configuration Files
|
|
|
|
There are a number of configuration files provided with the distribution for
|
|
your convenience. They provide various common configurations of machines.
|
|
You can use one of these files directly, by specifying its path as the argument
|
|
to the program, or as a starting point for you own configuration file. These sample
|
|
files are in the same location as the default +epple2.conf+ file.
|
|
|
|
The Epple ][ Emulator can actually be run without a configuration file at all.
|
|
In this case, you will be able to ``power on'' the Apple and see the low-resolution
|
|
graphics display showing random RAM data. The system will not run, because
|
|
there is no firmware loaded, but the emulator will otherwise be functional.
|