Apple-2-Tools/a2cloud
1
0
Fork 0
mirror of https://github.com/RasppleII/a2cloud.git synced 2024-11-27 05:49:25 +00:00
Code Issues Projects Releases Wiki Activity
82b9d9d13d
a2cloud/setup/setup.txt

2009 lines
110 KiB
Plaintext
Raw Normal View History

Add modelines
2015-10-30 12:34:48 +00:00
#! /bin/bash
# vim: set tabstop=4 shiftwidth=4 expandtab filetype=sh:
Copy the archive setup.txt to the source tree
2015-10-30 10:38:11 +00:00
Bump version ahead of where Ivan is just in case
2015-11-12 19:05:02 +00:00
version="190"
Copy the archive setup.txt to the source tree
2015-10-30 10:38:11 +00:00
adtProVersion="2.0.1"
setup.txt: Disable everything Most of this script works fine for jessie, but some of it doesn't and the script is actually quite long and complex. Ivan notes he found it easier to develop it as a cohesive unit that didn't need to worry about semaphores after doing A2SERVER, and that's obviously going to be particularly true since he was the only one working on it at the time. Well, now that's changing we'll want a little more structure. I won't be breaking things out into their own files right now, but I'm going to begin organizing things based on where they should go as I re-enable them. Basically, we'll port to jessie block-by-block.
2015-12-14 08:21:45 +00:00
#DISABLE# # Ensure URL we'll use ends in a /
#DISABLE# case "$A2CLOUD_SCRIPT_URL" in
#DISABLE# */) scriptURL="$A2CLOUD_SCRIPT_URL" ;;
#DISABLE# *) scriptURL="${A2CLOUD_SCRIPT_URL:-http://appleii.ivanx.com/a2cloud}/" ;;
#DISABLE# esac
#DISABLE#
#DISABLE# ## ID-bashbyter routines
#DISABLE#
#DISABLE# binToDec () {
#DISABLE# # converts single-byte binary string (8 bits) value to decimal
#DISABLE# # warning: no error checking
#DISABLE# # arg: binary string up to 8 bits
#DISABLE# # out: decimal value
#DISABLE# dec=0
#DISABLE# bits=$1
#DISABLE# while (( ${#bits} < 8 )); do
#DISABLE# bits="0$bits"
#DISABLE# done
#DISABLE# for n in {0..7}; do
#DISABLE# (( dec+=( ${bits:$n:1} * ( 2**(7-$n) ) ) ))
#DISABLE# done
#DISABLE# echo -n $dec
#DISABLE# }
#DISABLE#
#DISABLE# writecharDec () {
#DISABLE# # write corresponding character of single-byte decimal value into file
#DISABLE# # arg1: filename
#DISABLE# # arg2: offset (# of bytes to skip before writing)
#DISABLE# # arg3: decimal number from 0-255
#DISABLE# # exit: 8=extraneous arg, 11=missing arg1, 12=missing arg2,
#DISABLE# # 13=missing arg3, 22=invalid arg2, 23=invalid arg3
#DISABLE# # out: nothing
#DISABLE# [[ $1 ]] || return 11; [[ $2 ]] || return 12; [[ $3 ]] || return 13
#DISABLE# [[ $4 ]] && return 8
#DISABLE# [[ ( $(printf %d "$2" 2> /dev/null) == $2 ) \
#DISABLE# && ( $2 -ge 0 ) ]] || return 22
#DISABLE# [[ ( $(printf %d "$3" 2> /dev/null) == $3 ) \
#DISABLE# && ( $3 -ge 0 ) && ( $3 -lt 255 ) ]] || return 23
#DISABLE# # args are valid
#DISABLE# echo -n -e "\x$(printf %02X "$3")" | \
#DISABLE# dd of="$1" bs=1 seek=$(($2)) conv=notrunc 2> /dev/null
#DISABLE# }
#DISABLE#
#DISABLE# writecharsHex () {
#DISABLE# # write corresponding characters of hex values into file
#DISABLE# # arg1: filename
#DISABLE# # arg2: offset (# of bytes to skip before writing)
#DISABLE# # arg3: string of two-digit hexadecimal numbers from 00-FF, period delimited (not checked!)
#DISABLE# # out: nothing
#DISABLE# # exit: 8=extraneous arg, 11=missing arg1, 12=missing arg2,
#DISABLE# # 13=missing arg3, 22=invalid arg2, 23=invalid arg3
#DISABLE# [[ $1 ]] || return 11; [[ $2 ]] || return 12; [[ $3 ]] || return 13
#DISABLE# [[ $4 ]] && return 8
#DISABLE# [[ ( $(printf %d "$2" 2> /dev/null) == $2 ) \
#DISABLE# && ( $2 -ge 0 ) ]] || return 22
#DISABLE# p=0
#DISABLE# offset=$2
#DISABLE# len=${#3}
#DISABLE# while (( p < len )); do
#DISABLE# outByte=${3:$p:2}
#DISABLE# [[ $(printf %02X "0x$outByte" 2> /dev/null) == \
#DISABLE# $(echo -n "$outByte" | tr [a-z] [A-Z]) ]] || return 23
#DISABLE# # args are valid
#DISABLE# echo -n -e "\x$outByte" | \
#DISABLE# dd of="$1" bs=1 seek=$offset conv=notrunc 2> /dev/null
#DISABLE# (( p += 3 ))
#DISABLE# (( offset++ ))
#DISABLE# done
#DISABLE# }
#DISABLE#
#DISABLE# # A2CLOUD installer start
#DISABLE#
#DISABLE# isRpi=
#DISABLE# [[ -f /usr/bin/raspi-config ]] && isRpi=1
#DISABLE# [[ $isRpi ]] && { me="Pi"; fullme="Raspberry Pi"; } || { me="computer"; fullme="computer"; }
#DISABLE#
#DISABLE# isDebian=
#DISABLE# [[ ( -f /etc/debian_version ) && ( $(cut -c 1-2 < /etc/debian_version) == "7." ) && ( $(uname -m) == "i686" ) ]] && isDebian=1
#DISABLE#
#DISABLE# if [[ -f /usr/local/etc/A2CLOUD-version ]]; then
#DISABLE# echo "A2CLOUD version available: $version"
#DISABLE# echo "A2CLOUD version installed: $(cat /usr/local/etc/A2CLOUD-version)"
#DISABLE# fi
#DISABLE#
#DISABLE# args="$@"
#DISABLE#
#DISABLE# buildA2CloudDisk=
#DISABLE# downloadBinaries=1
#DISABLE# noA2PiExtras=
#DISABLE# skipRepoUpdate=
#DISABLE# restartPrompt=
#DISABLE# autoAnswerYes=
#DISABLE# updateRasppleII=
#DISABLE# slot6=
#DISABLE# noSetGroups=
#DISABLE# while [[ $1 ]]; do
#DISABLE# if [[ $1 == "-b" ]]; then
#DISABLE# shift
#DISABLE# buildA2CloudDisk=1
#DISABLE# elif [[ $1 == "-c" ]]; then
#DISABLE# shift
#DISABLE# downloadBinaries=
#DISABLE# elif [[ $1 == "-p" ]]; then
#DISABLE# shift
#DISABLE# noA2PiExtras=1
#DISABLE# elif [[ $1 == "-r" ]]; then
#DISABLE# shift
#DISABLE# skipRepoUpdate="-r"
#DISABLE# elif [[ $1 == "-s" ]]; then
#DISABLE# shift
#DISABLE# restartPrompt=1
#DISABLE# elif [[ $1 == "-y" ]]; then
#DISABLE# shift
#DISABLE# autoAnswerYes="-y"
#DISABLE# elif [[ $1 == "-6" ]]; then
#DISABLE# shift
#DISABLE# slot6=1
#DISABLE# elif [[ $1 == "-os" || $1 == "os" ]]; then
#DISABLE# shift
#DISABLE# updateRasppleII=1
#DISABLE# elif [[ $1 == "-v" ]]; then
#DISABLE# shift
#DISABLE# if [[ ! -f /usr/local/etc/A2CLOUD-version ]]; then
#DISABLE# echo "A2CLOUD version available: $version"
#DISABLE# echo "A2CLOUD version installed: none"
#DISABLE# fi
#DISABLE# [[ $0 == "-bash" ]] && return 1 || exit 1
#DISABLE# elif [[ $1 == "noSetGroups" ]]; then
#DISABLE# shift
#DISABLE# noSetGroups=1
#DISABLE# elif [[ $1 ]]; then
#DISABLE# echo "options:"
#DISABLE# echo "-v: display installed and available versions, then exit"
#DISABLE# echo "-y: auto-answer yes to all prompts"
#DISABLE# echo "-r: don't update package lists"
#DISABLE# echo "-s: prompt for restart after installation"
#DISABLE# echo "-6: put blank 140K disk images in GSport and KEGS slot 6"
#DISABLE# echo "-b: build A2CLOUD disks, rather than downloading premade images"
#DISABLE# echo "-c: compile non-package items, rather than downloading binaries"
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# echo "-p: don't install Apple II Pi extras"
#DISABLE# echo "-os: update Raspbian OS, A2CLOUD, A2SERVER, and Apple II Pi"
#DISABLE# fi
#DISABLE# [[ $0 == "-bash" ]] && return 1 || exit 1
#DISABLE# fi
#DISABLE# done
#DISABLE#
#DISABLE# if [[ $updateRasppleII ]]; then
#DISABLE# echo "A2CLOUD: Updating Raspple II (takes up to an hour)..."
#DISABLE# wget -qO /tmp/raspbian-update ${scriptURL}setup/raspbian-update.txt
#DISABLE# source /tmp/raspbian-update a2cloud a2server $autoAnswerYes $skipRepoUpdate
#DISABLE# [[ $0 == "-bash" ]] && return 0 || exit 0
#DISABLE# fi
#DISABLE#
#DISABLE# echo
#DISABLE# echo "Your $fullme will be set up for A2CLOUD, providing you"
#DISABLE# echo " with mass storage and online access for your Apple II!"
#DISABLE# echo
#DISABLE# echo "Answer yes to all prompts if you want to be able to do all the"
#DISABLE# echo " stuff mentioned on the A2CLOUD web site."
#DISABLE# echo
#DISABLE# echo "If you already have A2CLOUD installed, you will be updated to the"
#DISABLE# echo " latest version. Check out http://ivanx.com/a2cloud for details."
#DISABLE# echo
#DISABLE# echo "Full installation may take an hour or longer. Updates are usually"
#DISABLE# echo " much quicker. Type 'a2cloud-setup -h' for installation options."
#DISABLE# echo
#DISABLE# echo "Some actions will be performed as the root user."
#DISABLE# if [[ ! $autoAnswerYes ]]; then
#DISABLE# echo
#DISABLE# echo -n "Continue? "
#DISABLE# read
#DISABLE# if [[ ${REPLY:0:1} != "Y" && ${REPLY:0:1} != "y" ]]; then
#DISABLE# [[ $0 == "-bash" ]] && return 2 || exit 2
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE# echo
#DISABLE# installAllFeatures=
#DISABLE# if [[ ! $autoAnswerYes ]]; then
#DISABLE# echo
#DISABLE# echo -n "Do you want to install all A2CLOUD features? "
#DISABLE# read
#DISABLE# fi
#DISABLE# [[ $autoAnswerYes || ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installAllFeatures=1
#DISABLE#
#DISABLE# if [[ $installAllFeatures ]]; then
#DISABLE# installADTPro=1
#DISABLE# createBootDisk=1
#DISABLE# setupSerialPortLogin=1
#DISABLE# installCommTools=1
#DISABLE# installArchiveTools=1
#DISABLE# installEmulators=1
#DISABLE# [[ $isRpi ]] && installA2Pi=1 || installA2Pi=
#DISABLE# else
#DISABLE# installADTPro=
#DISABLE# echo
#DISABLE# echo -n "Install ADTPro server, for virtual drives and floppy disk transfers"
#DISABLE# if ! command -v X >/dev/null; then
#DISABLE# echo
#DISABLE# echo -n "(the X Window System and LXDE desktop environment will be installed)"
#DISABLE# fi
#DISABLE# echo -n "? "
#DISABLE# read
#DISABLE# [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installADTPro=1
#DISABLE#
#DISABLE# createBootDisk=
#DISABLE# installArchiveTools=
#DISABLE# newImageName=
#DISABLE# imageSize=
#DISABLE# if [[ $installADTPro ]]; then
#DISABLE#
#DISABLE# echo
#DISABLE# echo -n "Do you want to create A2CLOUD 140K and 800K boot disk images? "
#DISABLE# read
#DISABLE# if [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]]; then
#DISABLE# createBootDisk=1
#DISABLE# installArchiveTools=1
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ ! -f /usr/local/adtpro/disks/Virtual.po || ( -f /usr/local/adtpro/adtpro.sh && -f /usr/local/adtpro/disks/Virtual.po && $(sha1sum /usr/local/adtpro/disks/Virtual.po | cut -f 1 -d ' ') == "a209a8b3a485c95c57bc691a8a58867a6c0ec628" ) ]]; then
#DISABLE# while (( 1 )); do
#DISABLE# echo
#DISABLE# echo "The default blank disk in S2,D1 will be 800K. If you want a different size,"
#DISABLE# echo -n " enter it in K (larger is slower when writing; max 8192): "
#DISABLE# read
#DISABLE# if (( ${REPLY}0 >= 1400 )); then
#DISABLE# imageSize=$REPLY
#DISABLE# echo -n "Enter new image file name: "
#DISABLE# read
#DISABLE# if [[ $REPLY ]]; then
#DISABLE# reply="$REPLY"
#DISABLE# [[ $(tr [:lower:] [:upper:] <<< ${reply:(-3)}) != ".PO" ]] && reply="$REPLY.PO"
#DISABLE# if [[ ! -f /usr/local/adtpro/disks/"$reply" ]]; then
#DISABLE# newImageName="$reply"
#DISABLE# prodosVolName='0'
#DISABLE# # test ProDOS name legality
#DISABLE# while [[ ${#prodosVolName} -gt 15 || ! $(grep ^[A-Z][0-9A-Z\.]*$ <<< $prodosVolName) ]]; do
#DISABLE# echo -n "Enter new image ProDOS volume name (or return for 'UNTITLED'): "
#DISABLE# read
#DISABLE# [[ $REPLY ]] && prodosVolName="$REPLY" || prodosVolName="UNTITLED"
#DISABLE# prodosVolName=$(tr [:lower:] [:upper:] <<< $prodosVolName)
#DISABLE# done
#DISABLE# break
#DISABLE# else
#DISABLE# echo "A2CLOUD: Disk image already exists. Not creating."
#DISABLE# fi
#DISABLE# fi
#DISABLE# else
#DISABLE# break
#DISABLE# fi
#DISABLE# done
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE# setupSerialPortLogin=
#DISABLE# echo
#DISABLE# echo -n "Do you want to set up your $me for serial port login? "
#DISABLE# read
#DISABLE# [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && setupSerialPortLogin=1
#DISABLE#
#DISABLE# installCommTools=
#DISABLE# echo
#DISABLE# echo -n "Install internet access and file transfer tools on your $me? "
#DISABLE# read
#DISABLE# [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installCommTools=1
#DISABLE#
#DISABLE# if [[ ! $installArchiveTools ]]; then
#DISABLE# echo
#DISABLE# echo -n "Install utilities for Apple II archives and disk images? "
#DISABLE# read
#DISABLE# [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installArchiveTools=1
#DISABLE# fi
#DISABLE#
#DISABLE# installEmulators=
#DISABLE# echo
#DISABLE# echo -n "Install Apple IIgs and IIe emulators? "
#DISABLE# read
#DISABLE# [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installEmulators=1
#DISABLE#
#DISABLE# installA2Pi=
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# echo
#DISABLE# echo -n "Install Apple II Pi? "
#DISABLE# read
#DISABLE# [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installA2Pi=1
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE# echo
#DISABLE# userPw=$(sudo grep "^$USER" /etc/shadow | cut -f 2 -d ':')
#DISABLE# [[ $userPw == "$(echo 'apple2' | perl -e '$_ = <STDIN>; chomp; print crypt($_, $ARGV[0])' "${userPw%"${userPw#\$*\$*\$}"}")" ]] && isApple2Pw=1 || isApple2Pw=
#DISABLE# [[ $userPw == "$(echo 'raspberry' | perl -e '$_ = <STDIN>; chomp; print crypt($_, $ARGV[0])' "${userPw%"${userPw#\$*\$*\$}"}")" ]] && isRaspberryPw=1 || isRaspberryPw=
#DISABLE#
#DISABLE# if [[ ! $isApple2Pw && ! -f /usr/local/etc/A2CLOUD-version ]]; then
#DISABLE# if [[ ! $autoAnswerYes ]]; then
#DISABLE# echo "To make A2CLOUD work smoothly, you are recommended"
#DISABLE# echo "to change your password to 'apple2'."
#DISABLE# echo
#DISABLE# echo -n "Do you want to change the password for user '$USER' to 'apple2' now? "
#DISABLE# read
#DISABLE# fi
#DISABLE# if [[ $autoAnswerYes || ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]]; then
#DISABLE# echo "A2CLOUD: changing password for user '$USER' to 'apple2'..."
#DISABLE# echo "$USER:apple2" | sudo chpasswd
#DISABLE# isApple2Pw=1
#DISABLE# fi
#DISABLE# fi
#DISABLE# thePassword="your password"
#DISABLE# [[ $isApple2Pw ]] && thePassword="'apple2'"
#DISABLE# [[ $isRaspberryPw ]] && thePassword="'raspberry'"
#DISABLE#
#DISABLE#
#DISABLE# echo
#DISABLE# echo "During this installation, enter ${thePassword}"
#DISABLE# echo "if prompted for passwords."
#DISABLE# echo
#DISABLE# if [[ ! $autoAnswerYes ]]; then
#DISABLE# echo -n "Press return to continue..."
#DISABLE# read
#DISABLE# fi
#DISABLE#
#DISABLE#
#DISABLE# origDir="$PWD"
#DISABLE# rm -rf /tmp/a2cloud-install &> /dev/null
#DISABLE# mkdir -p /tmp/a2cloud-install
#DISABLE# cd /tmp/a2cloud-install
#DISABLE#
#DISABLE# echo
#DISABLE# if [[ ! $skipRepoUpdate ]]; then
#DISABLE# echo "A2CLOUD: Updating package lists..."
#DISABLE# sudo apt-get -y update > /dev/null
#DISABLE# else
#DISABLE# echo "A2CLOUD: Not updating package lists..."
#DISABLE# fi
#DISABLE#
#DISABLE#
#DISABLE# # general commands and configuration
#DISABLE#
#DISABLE# echo "A2CLOUD: Adding udev trigger to /etc/rc.local..."
#DISABLE# grep udevadm /etc/rc.local > /dev/null || sudo sed -i 's/^exit 0$/[ -e \/dev\/ttyUSBupper ] \&\& ! [ -f \/tmp\/udev-ttyUSBupper-added ] \&\& udevadm trigger --action=change\n[ -e \/dev\/ttyUSBlower ] \&\& ! [ -f \/tmp\/udev-ttyUSBlower-added ] \&\& udevadm trigger --action=change\n\nexit 0/' /etc/rc.local
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up dopo command..."
#DISABLE# sudo wget -qO /usr/local/bin/dopo ${scriptURL}setup/dopo.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/dopo
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up cppo command..."
#DISABLE# sudo wget -qO /usr/local/bin/cppo ${scriptURL}setup/cppo.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/cppo
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up a2cloud-help..."
#DISABLE# sudo wget -qO /usr/local/etc/a2cloud-help.txt ${scriptURL}setup/a2cloud-help.txt
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# sudo sed -i 's/^gsport.*$/gsport : GSport Apple IIgs emulator (or log in with user "apple2user")/' /usr/local/etc/a2cloud-help.txt
#DISABLE# fi
#DISABLE#
#DISABLE# # FIXME: We have "three" MOTD files in the A2CLOUD tree but we only use
#DISABLE# # one. The other two come from the Raspple II tree. We should clean
#DISABLE# # this up at some point.
#DISABLE# echo "A2CLOUD: Setting up motd..."
#DISABLE# if [[ $(grep Raspple /etc/motd) ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/rasppleii/motd-rasppleii.txt | sudo tee /etc/motd > /dev/null
#DISABLE# elif [[ $(grep A2SERVER /etc/motd) ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/rasppleii/motd-vm.txt | sudo tee /etc/motd > /dev/null
#DISABLE# else
#DISABLE# wget -qO- ${scriptURL}setup/motd.txt | sudo tee /etc/motd > /dev/null
#DISABLE# fi
#DISABLE#
#DISABLE# if { lspci 2> /dev/null | grep -q VirtualBox; }; then
#DISABLE# echo "A2CLOUD: Disabling VirtualBox console screen blanking..."
#DISABLE# sudo sed -i 's/^BLANK_DPMS=off/BLANK_DPMS=on/' /etc/kbd/config
#DISABLE# sudo sed -i 's/^BLANK_TIME=[^0].$/BLANK_TIME=0/' /etc/kbd/config
#DISABLE# sudo /etc/init.d/kbd restart &> /dev/null
#DISABLE# sudo /etc/init.d/console-setup restart &> /dev/null
#DISABLE# fi
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up control commands and environment variables..."
#DISABLE# sudo wget -qO /usr/local/etc/a2cloud-aliases ${scriptURL}setup/a2cloud-aliases.txt
#DISABLE# echo "A2CLOUD: Setting up login script..."
#DISABLE# sudo sed -i "s/a2cloud-aliases/a2cloudrc/" /etc/bash.bashrc
#DISABLE# sudo sed -i '/ttyUSB/d' /etc/bash.bashrc
#DISABLE# [[ ! $(grep a2cloudrc /etc/bash.bashrc) ]] && echo "source /usr/local/etc/a2cloudrc" | sudo tee -a /etc/bash.bashrc > /dev/null
#DISABLE# sudo wget -qO /usr/local/etc/a2cloudrc ${scriptURL}setup/a2cloudrc.txt
#DISABLE# source /usr/local/etc/a2cloudrc
#DISABLE#
#DISABLE# echo "A2CLOUD: Saving installer version..."
#DISABLE# echo "$version" | sudo tee /usr/local/etc/A2CLOUD-version &> /dev/null
#DISABLE#
#DISABLE# if ! dpkg-query -l avahi-daemon &>/dev/null || ! dpkg-query -l libnss-mdns &>/dev/null; then
#DISABLE# echo "A2CLOUD: Installing avahi-daemon (mDNS)..."
#DISABLE# sudo apt-get -y install avahi-daemon &> /dev/null
#DISABLE# sudo apt-get -y clean
#DISABLE# sudo sed -i 's/^\(hosts.*\)$/\1 mdns/' /etc/nsswitch.conf
#DISABLE# else
#DISABLE# echo "A2CLOUD: avahi-daemon (mDNS) is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ $installADTPro ]]; then
#DISABLE#
#DISABLE# freeSpace=$(df / | tail -1 | awk '{ print $4 }')
#DISABLE# java -version &> /dev/null
#DISABLE# if (( $? == 127 && $freeSpace < 350000 )); then
#DISABLE# echo "You do not have enough free space to install"
#DISABLE# echo "Java, which is needed for ADTPro server."
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# echo "If you haven't"
#DISABLE# echo "yet expanded the file system to use the full capacity"
#DISABLE# echo "of your SD card, type \"sudo raspi-config\" and do that."
#DISABLE# else
#DISABLE# echo "Free up some space."
#DISABLE# fi
#DISABLE# echo "Then try this installer again."
#DISABLE# echo
#DISABLE# [[ $0 == "-bash" ]] && return 3 || exit 3
#DISABLE# fi
#DISABLE#
#DISABLE# if ! command -v X >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing X Window System and LXDE..."
#DISABLE# sudo apt-get -y install xorg lxde
#DISABLE# sudo apt-get -y clean
#DISABLE# # prevent automatically running at startup
#DISABLE# sudo sed -i 's/^GRUB_CMDLINE_LINUX_DEFAULT=.*$/GRUB_CMDLINE_LINUX_DEFAULT="text"/' /etc/default/grub
#DISABLE# sudo update-grub
#DISABLE# else
#DISABLE# echo "A2CLOUD: X Window System and LXDE are already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# if { lspci 2> /dev/null | grep -q VirtualBox; }; then
#DISABLE# if { ! grep -q default /etc/xdg/lxsession/LXDE/autostart; }; then
#DISABLE# echo "A2CLOUD: Setting desktop to 800x600 in VirtualBox console (no Additions)..."
#DISABLE# echo -e "\nxrandr --output default --mode 800x600" | sudo tee -a /etc/xdg/lxsession/LXDE/autostart > /dev/null
#DISABLE# else
#DISABLE# echo "A2CLOUD: Desktop already set to 800x600 in VirtualBox console (no Additions)."
#DISABLE# fi
#DISABLE# if { ! grep -q VBOX0 /etc/xdg/lxsession/LXDE/autostart; }; then
#DISABLE# echo "A2CLOUD: Setting desktop to 800x600 in VirtualBox console (with Additions)..."
#DISABLE# echo -e "\nxrandr --output VBOX0 --mode 800x600" | sudo tee -a /etc/xdg/lxsession/LXDE/autostart > /dev/null
#DISABLE# else
#DISABLE# echo "A2CLOUD: Desktop already set to 800x600 in VirtualBox console (with Additions)."
#DISABLE# fi
#DISABLE# echo "A2CLOUD: Disabling screensaver and screen blanking in VirtualBox LXDE..."
#DISABLE# sudo sed -i 's/^\(@xscreensaver.*\)$/#\1\n\nxset s noblank\nxset s off\nxset -dpms\n/' /etc/xdg/lxsession/LXDE/autostart
#DISABLE# fi
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# sudo sed -i 's/^.*VBOX0.*$//' /etc/xdg/lxsession/LXDE/autostart 2> /dev/null
#DISABLE# sudo sed -i 's/^.*VBOX0.*$//' /etc/xdg/lxsession/LXDE-pi/autostart 2> /dev/null
#DISABLE# fi
#DISABLE#
#DISABLE# # install or update java
#DISABLE# javaVersion=$(java -version 2>&1)
#DISABLE# if [[ ( $? -eq 127 ) || ( $(head -1 <<< "$javaVersion" | cut -f 2 -d '.') -lt 8 ) ]]; then
#DISABLE# echo "A2CLOUD: Installing Java (takes a while)..."
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# if [[ $(apt-cache search '^oracle-java8-jdk$') ]]; then
#DISABLE# sudo apt-get -y install oracle-java8-jdk
#DISABLE# else
#DISABLE# sudo apt-get -y install oracle-java7-jdk
#DISABLE# fi
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# # from http://www.webupd8.org/2012/06/how-to-install-oracle-java-7-in-debian.html
#DISABLE# if { ! grep -q webupd8team /etc/apt/sources.list; }; then
#DISABLE# {
#DISABLE# echo;
#DISABLE# echo "# Oracle Java JDK";
#DISABLE# echo "deb http://ppa.launchpad.net/webupd8team/java/ubuntu precise main";
#DISABLE# echo "deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu precise main";
#DISABLE# } | sudo tee -a /etc/apt/sources.list > /dev/null
#DISABLE# fi
#DISABLE# sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys EEA14886
#DISABLE# sudo apt-get -y update
#DISABLE# echo debconf shared/accepted-oracle-license-v1-1 select true | sudo debconf-set-selections
#DISABLE# sudo apt-get -y install oracle-java8-installer
#DISABLE# sudo apt-get -y clean
#DISABLE# fi
#DISABLE# source /usr/local/etc/a2cloudrc
#DISABLE# else
#DISABLE# echo "A2CLOUD: Java is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# updateADTPro=
#DISABLE# # check if update needed
#DISABLE# if [ -f /usr/local/adtpro/lib/ADTPro-* ]; then
#DISABLE# if [[ $(ls -1 /usr/local/adtpro/lib/ADTPro-*.jar | cut -f 6 -d '/') != "ADTPro-$adtProVersion.jar" ]]; then
#DISABLE# echo
#DISABLE# echo "ADTPro server should be updated. If you have made any customizations"
#DISABLE# echo " to any of the files in /usr/local/adtpro, other than the 'disks' folder,"
#DISABLE# echo " they will be lost. If you don't know what this means, then you don't"
#DISABLE# echo -n " need to worry. Update now? "
#DISABLE# read
#DISABLE# if [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]]; then
#DISABLE# updateADTPro=1
#DISABLE# echo "A2CLOUD: removing old version of ADTPro server..."
#DISABLE# sudo pkill -f [A]DTPro
#DISABLE# sudo rm /usr/local/adtpro/disks/ADTPRO*.DSK &> /dev/null
#DISABLE# sudo rm /usr/local/adtpro/disks/ADTPRO*.PO &> /dev/null
#DISABLE# sudo rm /usr/local/adtpro/disks/VDRIVE*.DSK &> /dev/null
#DISABLE# sudo rm -r /tmp/a2cloud-install/disks &> /dev/null
#DISABLE# sudo mv /usr/local/adtpro/disks /tmp/a2cloud-install
#DISABLE# sudo rm -r /usr/local/adtpro/ac.bat \
#DISABLE# /usr/local/adtpro/ac.sh \
#DISABLE# /usr/local/adtpro/adtpro.bat \
#DISABLE# /usr/local/adtpro/adtpro.cmd \
#DISABLE# /usr/local/adtpro/ADTPro.html \
#DISABLE# /usr/local/adtpro/adtpro.sh \
#DISABLE# /usr/local/adtpro/lib \
#DISABLE# /usr/local/adtpro/LICENSE \
#DISABLE# /usr/local/adtpro/README \
#DISABLE# &> /dev/null
#DISABLE# fi
#DISABLE# else
#DISABLE# echo "A2CLOUD: ADTPro server does not need updating."
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ ! -f /usr/local/adtpro/adtpro.sh || ! -f /usr/local/adtpro/ADTPro.html ]]; then
#DISABLE# echo "A2CLOUD: installing ADTPro server..."
#DISABLE# sudo pkill -f [A]DTPro
#DISABLE# wget -qO /tmp/a2cloud-install/adtpro.tar.gz downloads.sourceforge.net/project/adtpro/adtpro/ADTPro-$adtProVersion/ADTPro-$adtProVersion.tar.gz
#DISABLE# sudo mkdir -p /usr/local/adtpro
#DISABLE# sudo tar --strip-components=1 -C /usr/local/adtpro -zxf /tmp/a2cloud-install/adtpro.tar.gz
#DISABLE# sudo chmod -R ugo+w /usr/local/adtpro
#DISABLE# sudo ln -s /usr/local/adtpro/lib/ADTPro*jar /usr/local/adtpro/lib/ADTPro.jar
#DISABLE# sudo ln -s /usr/local/adtpro/lib/AppleCommander/AppleCommander*ac.jar /usr/local/adtpro/lib/AppleCommander/AppleCommander-ac.jar
#DISABLE# echo "sudo /usr/local/adtpro/adtpro.sh \$@" | sudo tee /usr/local/bin/adtpro.sh > /dev/null
#DISABLE# sudo chmod ugo+x /usr/local/bin/adtpro.sh
#DISABLE# sudo usermod -a -G uucp $USER
#DISABLE# sudo usermod -a -G uucp root
#DISABLE# else
#DISABLE# echo "A2CLOUD: ADTPro server is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ ! -f /usr/local/adtpro/lib/AppleCommander/AppleCommander-1.3.5.13id-ac.jar ]]; then
#DISABLE# echo "A2CLOUD: Installing AppleCommander-1.3.5.13id..."
#DISABLE# sudo mkdir -p /usr/local/adtpro/lib/AppleCommander
#DISABLE# wget -qO /usr/local/adtpro/lib/AppleCommander/AppleCommander-1.3.5.13id-ac.jar http://downloads.sourceforge.net/project/applecommander/AppleCommander%20-%20Interim/testcase/AppleCommander-1.3.5.13id-ac.jar
#DISABLE# rm /usr/local/adtpro/lib/AppleCommander/AppleCommander-ac.jar &> /dev/null
#DISABLE# ln -s AppleCommander-1.3.5.13id-ac.jar /usr/local/adtpro/lib/AppleCommander/AppleCommander-ac.jar
#DISABLE# else
#DISABLE# echo "A2CLOUD: AppleCommander-1.3.5.13id is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up customized adtpro.sh..."
#DISABLE# wget -qO /usr/local/adtpro/adtpro.sh ivanx.com/a2cloud/setup/adtpro.sh.txt
#DISABLE# sudo chmod ugo+rwx /usr/local/adtpro/adtpro.sh
#DISABLE#
#DISABLE# if [[ $updateADTPro ]]; then
#DISABLE# echo "A2CLOUD: Replacing disks folder..."
#DISABLE# sudo mv /tmp/a2cloud-install/disks/* /usr/local/adtpro/disks
#DISABLE# sudo rmdir /tmp/a2cloud-install/disks
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ ! -f /usr/lib/jni/librxtxSerial.so ]]; then
#DISABLE# echo "A2CLOUD: Installing serial port libraries..."
#DISABLE# sudo apt-get -y install librxtx-java
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: Serial port libraries are already installed."
#DISABLE# fi
#DISABLE# [[ ! -f /usr/lib/RXTXcomm.jar ]] && sudo ln -s /usr/share/java/RXTXcomm.jar /usr/lib &> /dev/null
#DISABLE# [[ ! -d /usr/local/adtpro/lib/rxtx/rxtx-2.2pre2-local/arm ]] && ln -s /usr/lib/jni /usr/local/adtpro/lib/rxtx/rxtx-2.2pre2-local/arm &> /dev/null
#DISABLE#
#DISABLE# if ! command -v xvfb-run >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing xvfb for headless operation..."
#DISABLE# sudo apt-get -y install xvfb
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: xvfb is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ -f /usr/local/sbin/afpd ]]; then # A2SERVER/netatalk installed
#DISABLE# if [[ ! -d /media/A2SHARED/ADTDISKS || ! $(grep ADTDISKS /usr/local/etc/netatalk/AppleVolumes.default) ]]; then
#DISABLE# echo "A2CLOUD: Setting up /usr/local/adtpro/disks for Apple file sharing..."
#DISABLE# if [[ ! -d /media/A2SHARED/ADTDISKS ]]; then
#DISABLE# ln -s /usr/local/adtpro/disks /media/A2SHARED/ADTDISKS 2> /dev/null
#DISABLE# fi
#DISABLE# if [[ ! $(grep ADTDISKS /usr/local/etc/netatalk/AppleVolumes.default) ]]; then
#DISABLE# sudo sed -i 's@^# End of File@/media/A2SHARED/ADTDISKS ADTDISKS ea:ad\n\n# End of File@' /usr/local/etc/netatalk/AppleVolumes.default
#DISABLE# fi
#DISABLE# sudo /etc/init.d/netatalk restart
#DISABLE# else
#DISABLE# echo "A2CLOUD: /usr/local/adtpro/disks is already set up for Apple file sharing."
#DISABLE# fi
#DISABLE#
#DISABLE# if { grep -q A2SHARED /etc/samba/smb.conf 2> /dev/null; }; then
#DISABLE# # SMB already enabled by A2SERVER
#DISABLE# if { grep -q ADTDISKS /etc/samba/smb.conf 2>/dev/null; }; then
#DISABLE# echo "A2CLOUD: /usr/local/adtpro/disks is already set up for Windows file sharing."
#DISABLE# else
#DISABLE# echo "A2CLOUD: Setting up /usr/local/adtpro/disks for Windows file sharing..."
#DISABLE# echo "[ADTDISKS]" | sudo tee -a /etc/samba/smb.conf > /dev/null
#DISABLE# echo " path = /media/A2SHARED/ADTDISKS" | sudo tee -a /etc/samba/smb.conf > /dev/null
#DISABLE# echo " browsable = yes" | sudo tee -a /etc/samba/smb.conf > /dev/null
#DISABLE# echo " guest ok = yes" | sudo tee -a /etc/samba/smb.conf > /dev/null
#DISABLE# echo " read only = no" | sudo tee -a /etc/samba/smb.conf > /dev/null
#DISABLE# echo " create mask = 0666" | sudo tee -a /etc/samba/smb.conf > /dev/null
#DISABLE# echo " force user = $(whoami)" | sudo tee -a /etc/samba/smb.conf > /dev/null
#DISABLE# fi
#DISABLE# else
#DISABLE# echo "A2CLOUD: Windows file sharing not in use."
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up adtpro-start command..."
#DISABLE# sudo wget -qO /usr/local/bin/adtpro-start ${scriptURL}setup/adtpro-start.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/adtpro-start
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up vsd1/vsd2 commands..."
#DISABLE# sudo wget -qO /usr/local/bin/vsd ${scriptURL}setup/vsd.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/vsd
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up acmd command..."
#DISABLE# sudo wget -qO /usr/local/bin/acmd ${scriptURL}setup/acmd.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/acmd
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up mkpo command..."
#DISABLE# sudo wget -qO /usr/local/bin/mkpo ${scriptURL}setup/mkpo.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/mkpo
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up dos2pro command..."
#DISABLE# sudo wget -qO /usr/local/bin/dos2pro ${scriptURL}setup/dos2pro.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/dos2pro
#DISABLE#
#DISABLE# fi
#DISABLE#
#DISABLE# if command -v X >/dev/null; then
#DISABLE# if dpkg-query -l xrdp; then
#DISABLE# echo "A2CLOUD: Installing xrdp/tightvncserver..."
#DISABLE# sudo apt-get -y install xrdp
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: xrdp/tightvncserver is already installed."
#DISABLE# fi
#DISABLE# else
#DISABLE# echo "A2CLOUD: X11 not found; not installing xrdp/tightvncserver."
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ $setupSerialPortLogin ]]; then
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting GPIO serial login to 4800 bps, and disabling..."
#DISABLE# # set console port login to 4800 bps (using RPi console cable) and comment it out
#DISABLE# sudo sed -i 's/^\(T.*\)ttyAMA0 .* /#\1ttyAMA0 4800 /' /etc/inittab
#DISABLE# sudo sed -i 's/ttyAMA0,[0-9]*/ttyAMA0,4800/g' /boot/cmdline.txt 2> /dev/null
#DISABLE#
#DISABLE# if ! command -v screen >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing Screen for multiple terminals..."
#DISABLE# sudo apt-get -y install screen
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: Screen is already installed."
#DISABLE# fi
#DISABLE# echo "A2CLOUD: Disabling Screen welcome message..."
#DISABLE# sudo sed -i 's/^#startup_message/startup_message/' /etc/screenrc
#DISABLE#
#DISABLE# # use 8-bit (non-Unicode) character set for proper emulation in Apple II term programs
#DISABLE# IFS='' defaultLang=$(grep ^LANG= /etc/default/locale | cut -f 2 -d '=')
#DISABLE# langLatin1=${defaultLang%%.*}
#DISABLE# if [[ ! $(grep "^$langLatin1.ISO" /usr/share/i18n/SUPPORTED) ]]; then
#DISABLE# langLatin1="en_US"
#DISABLE# fi
#DISABLE# if [[ $(cat /usr/local/etc/a2cloud-lang 2> /dev/null) != $langLatin1 ]]; then
#DISABLE# echo "A2CLOUD: Setting serial port login to use 8-bit character set..."
#DISABLE# if [[ ! $(grep "^$langLatin1.ISO" /etc/locale.gen) ]]; then
#DISABLE# echo "A2CLOUD: Generating locales..."
#DISABLE# locs=$(IFS='' grep "^[^#]" /etc/locale.gen | while read -r thisLoc; do echo -n "$thisLoc, " ; done)
#DISABLE# locISO=$(grep "$langLatin1.ISO" /usr/share/i18n/SUPPORTED | sort | head -1)
#DISABLE# echo "locales locales/locales_to_be_generated multiselect $locs$locISO" | sudo debconf-set-selections
#DISABLE# sudo rm /etc/locale.gen &> /dev/null
#DISABLE# sudo dpkg-reconfigure -f noninteractive locales
#DISABLE# else
#DISABLE# echo "A2CLOUD: Locales have already been generated."
#DISABLE# fi
#DISABLE# # set LANG to ISO-8859 (8-bit) character set on TTY login
#DISABLE# echo "${locISO%% *}" | sudo tee /usr/local/etc/a2cloud-lang > /dev/null
#DISABLE# source /usr/local/etc/a2cloudrc
#DISABLE# else
#DISABLE# echo "A2CLOUD: Serial port login is already using 8-bit character set."
#DISABLE# fi
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up baud command..."
#DISABLE# sudo wget -qO /usr/local/bin/baud ${scriptURL}setup/baud.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/baud
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up term command..."
#DISABLE# sudo wget -qO /usr/local/bin/term ${scriptURL}setup/term.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/term
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up usbgetty command..."
#DISABLE# sudo wget -qO /usr/local/sbin/usbgetty ${scriptURL}setup/usbgetty.txt
#DISABLE# sudo chmod ugo+x /usr/local/sbin/usbgetty
#DISABLE#
#DISABLE# echo "A2CLOUD: Removing ttyUSB0 shell login..."
#DISABLE# sudo sed -i "s/^\([^#].*ttyUSB0.*\)$//" /etc/inittab
#DISABLE#
#DISABLE# if [[ ! $(grep -e '-scanttyUSB' /etc/inittab) ]]; then
#DISABLE# echo "A2CLOUD: Adding USB port shell login at 4800 bps..."
#DISABLE# echo -e "\n\n#for USB-to-serial adapter\nT1:23:respawn:/usr/local/sbin/usbgetty -h -L -scanttyUSB 4800 vt100" | sudo tee -a /etc/inittab > /dev/null
#DISABLE# sudo init q
#DISABLE# sudo pkill -f "[g]etty.*ttyUSB"
#DISABLE# else
#DISABLE# echo "A2CLOUD: USB port shell login already added."
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up USB port serial adapter handler..."
#DISABLE# sudo wget -qO /usr/local/sbin/ttyusbhandler ${scriptURL}setup/ttyusbhandler.txt
#DISABLE# sudo chmod ugo+x /usr/local/sbin/ttyusbhandler
#DISABLE#
#DISABLE# if [[ ! -f /etc/udev/rules.d/50-usb.rules ]]; then
#DISABLE# echo "A2CLOUD: Creating device rules for USB ports..."
#DISABLE# udevLines=
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# # assign ttyUSBupper, or ttyUSBupper_hubXX, for shell usb-to-serial adapter
#DISABLE# # assign ttyUSBlower, or ttyUSBlower_hubXX, for ADTPro usb-to-serial adapter
#DISABLE# # (A/A+ direct attach is always ttyUSBlower;
#DISABLE# # hub attached to A/A+ will be ttyUSBupper on port 2, and ttyUSBlower on port 3)
#DISABLE# udevLines+='KERNEL=="ttyUSB*", KERNELS=="1-1:1.0", SYMLINK+="ttyUSBlower", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBlower"\n'
#DISABLE# udevLines+='ACTION=="remove", ENV{DEVPATH}=="*1-1:1.0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBlower"\n'
#DISABLE# udevLines+='KERNEL=="ttyUSB*", KERNELS=="1-1.2:1.0", SYMLINK+="ttyUSBupper", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBupper"\n'
#DISABLE# udevLines+='ACTION=="remove", ENV{DEVPATH}=="*1-1.2:1.0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBupper"\n'
#DISABLE# udevLines+='KERNEL=="ttyUSB*", KERNELS=="1-1.3:1.0", SYMLINK+="ttyUSBlower", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBlower"\n'
#DISABLE# udevLines+='ACTION=="remove", ENV{DEVPATH}=="*1-1.3:1.0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBlower"\n'
#DISABLE# for i in {1..25}; do
#DISABLE# ii=$(printf %02d $i)
#DISABLE# udevLines+='KERNEL=="ttyUSB*", KERNELS=="1-1.2.'$i':1.0", SYMLINK+="ttyUSBupper_hub'$ii'", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBupper_hub'$ii'"\n'
#DISABLE# udevLines+='ACTION=="remove", ENV{DEVPATH}=="*1-1.2.'$i':1.0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBupper_hub'$ii'"\n'
#DISABLE# udevLines+='KERNEL=="ttyUSB*", KERNELS=="1-1.3.'$i':1.0", SYMLINK+="ttyUSBlower_hub'$ii'", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBlower_hub'$ii'"\n'
#DISABLE# udevLines+='ACTION=="remove", ENV{DEVPATH}=="*1-1.3.'$i':1.0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBlower_hub'$ii'"\n'
#DISABLE# done
#DISABLE# else
#DISABLE# # on non-Pi installations, assign ttyUSBupper to ttyUSB0 and ttyUSBlower to ttyUSB1
#DISABLE# udevLines+='KERNEL=="ttyUSB0", SYMLINK+="ttyUSBupper", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBupper"\n'
#DISABLE# udevLines+='ACTION=="remove", ENV{DEVPATH}=="*ttyUSB0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBupper"\n'
#DISABLE# udevLines+='KERNEL=="ttyUSB1", SYMLINK+="ttyUSBlower", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBlower"\n'
#DISABLE# udevLines+='ACTION=="remove", ENV{DEVPATH}=="*ttyUSB1*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBlower"\n'
#DISABLE# fi
#DISABLE# echo -e "$udevLines" | sudo tee /etc/udev/rules.d/50-usb.rules > /dev/null
#DISABLE# else
#DISABLE# echo "A2CLOUD: Device rules for USB ports already exist."
#DISABLE# fi
#DISABLE#
#DISABLE#
#DISABLE# if [[ $installCommTools ]]; then
#DISABLE#
#DISABLE# if ! command -v curl >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing curl..."
#DISABLE# sudo apt-get -y install curl
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: curl is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# if ! command -v sz >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing rzsz for X/Y/Zmodem transfers..."
#DISABLE# sudo apt-get -y install lrzsz
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: rzsz is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# if ! command -v ftp >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing ftp..."
#DISABLE# sudo apt-get -y install ftp
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: ftp is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# if ! command -v cftp >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing cftp..."
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# if [[ $downloadBinaries ]]; then
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/cftp-rpi.tgz | sudo tar Pzx
#DISABLE# elif [[ $isDebian ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/cftp-debian7_x86.tgz | sudo tar Pzx
#DISABLE# fi
#DISABLE# fi
#DISABLE# if ! command -v cftp >/dev/null; then
#DISABLE# sudo apt-get -y install build-essential
#DISABLE# sudo apt-get -y install ncurses-dev
#DISABLE# sudo apt-get -y clean
#DISABLE# rm -rf /tmp/a2cloud-install/cftp* &> /dev/null
#DISABLE# mkdir -p /tmp/a2cloud-install/cftp
#DISABLE# cd /tmp/a2cloud-install/cftp
#DISABLE# wget -q -O cftp.tgz http://nih.at/cftp/cftp-0.12.tar.gz
#DISABLE# tar zxf cftp.tgz
#DISABLE# cd cftp-0.12
#DISABLE# ./configure
#DISABLE# make
#DISABLE# sudo make install
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# rm -rf cftp
#DISABLE# fi
#DISABLE# else
#DISABLE# echo "A2CLOUD: cftp is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# if ! command -v lynx >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing lynx..."
#DISABLE# sudo apt-get -y install lynx
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: lynx is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# if ! command -v links >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing links..."
#DISABLE# sudo apt-get -y --force-yes install links
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: links is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# sudo wget -qO /usr/local/bin/a2news ${scriptURL}setup/a2news.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/a2news
#DISABLE# if ! command -v tin >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing a2news/tin..."
#DISABLE# sudo apt-get -y install tin
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: a2news/tin is already installed."
#DISABLE# fi
#DISABLE# # have exim4 use IPv4 only to prevent log errors (IPv6 is off by default in Raspbian)
#DISABLE# if [[ $(grep ' ; ::1' /etc/exim4/update-exim4.conf.conf) ]]; then
#DISABLE# echo "A2CLOUD: Setting exim4 to use only IPv4 to prevent startup error messages..."
#DISABLE# sudo sed -i 's/ ; ::1//' /etc/exim4/update-exim4.conf.conf
#DISABLE# sudo update-exim4.conf
#DISABLE# sudo rm /var/log/exim4/mainlog /var/log/exim4/paniclog &> /dev/null
#DISABLE# fi
#DISABLE# # restore exim4 log directory if occupied by a file put there by earlier A2CLOUD versions
#DISABLE# if [[ -f /var/log/exim4 ]]; then
#DISABLE# echo "A2CLOUD: Restoring exim4 log directory..."
#DISABLE# sudo rm /var/log/exim4
#DISABLE# sudo mkdir /var/log/exim4
#DISABLE# sudo chown Debian-exim:adm /var/log/exim4
#DISABLE# sudo chmod 2750 /var/log/exim4
#DISABLE# fi
#DISABLE#
#DISABLE# sudo wget -qO /usr/local/bin/a2chat ${scriptURL}setup/a2chat.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/a2chat
#DISABLE# if ! command -v irssi >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing a2chat/irssi..."
#DISABLE# sudo apt-get -y install irssi
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: a2chat/irssi is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# if ! command -v telnet >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing telnet..."
#DISABLE# sudo apt-get -y install telnet
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: telnet is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# # Do we need to check for the readline module here as well?
#DISABLE# #if [[ ( ! -f /usr/bin/ttytter && ! -f /usr/local/bin/ttytter ) || ! -f "/usr/local/share/perl/5.14.2/Term/ReadLine/TTYtter.pm" ]]; then
#DISABLE# if ! command -v ttyter >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing TTYtter..."
#DISABLE# sudo wget -qO /usr/local/bin/ttytter http://www.floodgap.com/software/ttytter/dist2/2.1.00.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/ttytter
#DISABLE# perlVersion=$(perl -e 'print $^V' | cut -c 2-)
#DISABLE# if [[ ! -f "/usr/local/share/perl/$perlVersion/Term/ReadLine/TTYtter.pm" ]]; then
#DISABLE# echo "A2CLOUD: Installing TTYtter readline module..."
#DISABLE# if [[ $downloadBinaries && $perlVersion == "5.14.2" ]]; then
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/ttytter_readline-rpi.tgz | sudo tar Pzx
#DISABLE# elif [[ $isDebian ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/ttytter_readline-debian7_x86.tgz | sudo tar Pzx
#DISABLE# fi
#DISABLE# fi
#DISABLE# if [[ ! -f "/usr/local/share/perl/$perlVersion/Term/ReadLine/TTYtter.pm" ]]; then
#DISABLE# if [[ ! -f "/usr/local/lib/perl/$perlVersion/Term/ReadKey.pm" ]]; then
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# wget -qO TermReadKey-2.31.tar.gz http://www.cpan.org/authors/id/J/JS/JSTOWE/TermReadKey-2.31.tar.gz
#DISABLE# tar zxf TermReadKey-2.31.tar.gz
#DISABLE# cd TermReadKey-2.31
#DISABLE# perl Makefile.PL &> /dev/null
#DISABLE# make &> /dev/null
#DISABLE# sudo make install &> /dev/null
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# rm -rf TermReadKey-2.31
#DISABLE# fi
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# wget -qO Term-ReadLine-TTYtter-1.4.tar.gz http://www.cpan.org/authors/id/C/CK/CKAISER/Term-ReadLine-TTYtter-1.4.tar.gz
#DISABLE# tar zxf Term-ReadLine-TTYtter-1.4.tar.gz
#DISABLE# cd Term-ReadLine-TTYtter-1.4
#DISABLE# perl Makefile.PL &> /dev/null
#DISABLE# make &> /dev/null
#DISABLE# sudo make install &> /dev/null
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# rm -rf Term-ReadLine-TTYtter-1.4
#DISABLE# fi
#DISABLE# else
#DISABLE# echo "A2CLOUD: TTYtter readline module is already installed."
#DISABLE# fi
#DISABLE# else
#DISABLE# echo "A2CLOUD: TTYtter is already installed."
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ $installA2Pi ]]; then
#DISABLE# if dpkg-query -l a2pi &>/dev/null; then
#DISABLE# echo "A2CLOUD: Installing Apple II Pi..."
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# if ! grep 'schmenk.is-a-geek.com' /etc/apt/sources.list; then
#DISABLE# echo "deb http://schmenk.is-a-geek.com/raspbian wheezy contrib" | sudo tee -a /etc/apt/sources.list > /dev/null
#DISABLE# sudo apt-get -y update > /dev/null
#DISABLE# fi
#DISABLE# sudo apt-get -y --force-yes install a2pi
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: Apple II Pi is already installed."
#DISABLE# fi
#DISABLE# if [[ ! $noA2PiExtras ]]; then
#DISABLE# if [[ ! $(dpkg -l | grep libpcap0.8-dev) ]]; then
#DISABLE# sudo apt-get -y install libpcap0.8-dev
#DISABLE# sudo apt-get -y clean
#DISABLE# fi
#DISABLE# if ! command -v gsport >/dev/null; then
#DISABLE# # echo "A2CLOUD: Updating package repositories to include Apple II Pi..."
#DISABLE# # sudo apt-get -y update > /dev/null
#DISABLE# echo "A2CLOUD: Installing Apple II Pi extras (GSport)..."
#DISABLE# sudo apt-get -y --force-yes install apple2user
#DISABLE# sudo apt-get -y clean
#DISABLE# else
#DISABLE# echo "A2CLOUD: Apple II Pi extras (GSport) are already installed."
#DISABLE# fi
#DISABLE# fi
#DISABLE# sudo sed -i 's/( $SSH_CLIENT || $REMOTEHOST )/( $(tty | grep ttyUSB) || $(tty | grep ttyAMA) || $SSH_CLIENT || $REMOTEHOST )/' /usr/bin/gsport
#DISABLE# if [[ $slot6 ]]; then
#DISABLE# echo "A2CLOUD: Putting blank disks in GSport slot 6..."
#DISABLE# sudo sed -i 's@^s6d1.*$@s6d1 = /usr/share/gsport/disks/slot6drive1.po@' /usr/share/gsport/config.txt
#DISABLE# sudo sed -i 's@^s6d2.*$@s6d2 = /usr/share/gsport/disks/slot6drive2.po@' /usr/share/gsport/config.txt
#DISABLE# sudo sed -i 's@^s6d1.*$@s6d1 = /usr/share/gsport/disks/slot6drive1.po@' /home/apple2/config.txt
#DISABLE# sudo sed -i 's@^s6d2.*$@s6d2 = /usr/share/gsport/disks/slot6drive2.po@' /home/apple2/config.txt
#DISABLE# if [[ ! -f /usr/share/gsport/disks/slot6drive1.po || ! -f /usr/share/gsport/disks/slot6drive2.po ]]; then
#DISABLE# wget -qO- ivanx.com/a2cloud/files/slot6-gsport-rpi.tgz | sudo tar Pzx 2> /dev/null
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE# # set AppleTalk to turbo
#DISABLE# if ! grep -q 'g_appletalk_turbo' /usr/share/gsport/config.txt; then
#DISABLE# if grep -q 'bram1[00]' /usr/share/gsport/config.txt; then
#DISABLE# sudo sed -i 's/^\(bram1\[00\]\)/g_appletalk_turbo = 1\n\n\1/' /usr/share/gsport/config.txt
#DISABLE# else
#DISABLE# echo -e '\ng_appletalk_turbo = 1' | sudo tee -a /usr/share/gsport/config.txt > /dev/null
#DISABLE# fi
#DISABLE# fi
#DISABLE# sudo sed -i 's/^g_appletalk_turbo = 0/g_appletalk_turbo = 1/' /usr/share/gsport/config.txt
#DISABLE#
#DISABLE# # enable Uthernet
#DISABLE# if ! grep -q 'g_ethernet[^_]' /usr/share/gsport/config.txt; then
#DISABLE# if grep -q 'bram1[00]' /usr/share/gsport/config.txt; then
#DISABLE# sudo sed -i 's/^\(bram1\[00\]\)/g_ethernet = 1\n\n\1/' /usr/share/gsport/config.txt
#DISABLE# else
#DISABLE# echo -e '\ng_ethernet = 1' | sudo tee -a /usr/share/gsport/config.txt > /dev/null
#DISABLE# fi
#DISABLE# fi
#DISABLE# sudo sed -i 's/^g_ethernet = 0/g_ethernet = 1/' /usr/share/gsport/config.txt
#DISABLE#
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ $installEmulators ]]; then
#DISABLE#
#DISABLE# # KEGS
#DISABLE# if ! command -v xkegs >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing KEGS..."
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# if [[ $downloadBinaries ]]; then
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/kegs-rpi.tgz | sudo tar Pzx 2> /dev/null
#DISABLE# elif [[ $isDebian ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/kegs-debian7_x86.tgz | sudo tar Pzx
#DISABLE# fi
#DISABLE# fi
#DISABLE# if ! command -v xkegs >/dev/null; then
#DISABLE# echo "A2CLOUD: Building KEGS from source..."
#DISABLE# sudo apt-get -y install build-essential &> /dev/null
#DISABLE# sudo apt-get -y install libx11-dev libxext-dev xfonts-base &> /dev/null
#DISABLE# sudo apt-get -y clean
#DISABLE# mkdir -p /tmp/a2cloud-install/kegs
#DISABLE# cd /tmp/a2cloud-install/kegs
#DISABLE# wget -q -O kegs.tgz kegs.sourceforge.net/kegs.0.91.tar.gz
#DISABLE# tar zxf kegs.tgz
#DISABLE# cd kegs.0.91/src
#DISABLE# rm vars 2> /dev/null
#DISABLE# ln -s vars_x86linux vars
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# sudo sed -i 's/march=pentium/march=armv6k/' vars_x86linux
#DISABLE# fi
#DISABLE# make &> /dev/null
#DISABLE# gcc -o ../to_pro to_pro.c &> /dev/null
#DISABLE# gcc -o ../partls partls.c &> /dev/null
#DISABLE# sudo cp -P ../xkegs ../to_pro ../partls /usr/local/bin
#DISABLE# sudo cp ../config.kegs /usr/local/lib
#DISABLE# sudo chmod ugo+w /usr/local/lib/config.kegs
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# rm -rf kegs
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ $slot6 ]]; then
#DISABLE# echo "A2CLOUD: Putting blank disks in KEGS slot 6..."
#DISABLE# sudo sed -i 's@^s6d1.*$@s6d1 = /usr/local/share/gsdisks/slot6drive1.po@' /usr/local/lib/config.kegs
#DISABLE# sudo sed -i 's@^s6d2.*$@s6d2 = /usr/local/share/gsdisks/slot6drive2.po@' /usr/local/lib/config.kegs
#DISABLE# if [[ ! -f /usr/local/share/gsdisks/slot6drive1.po || ! -f /usr/local/share/gsdisks/slot6drive2.po ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/slot6.tgz | sudo tar Pzx 2> /dev/null
#DISABLE# fi
#DISABLE# fi
#DISABLE# else
#DISABLE# echo "A2CLOUD: KEGS is already installed."
#DISABLE# fi
#DISABLE# echo "A2CLOUD: Updating KEGS launch and setup files..."
#DISABLE#
#DISABLE# sudo addgroup kegs &> /dev/null
#DISABLE# sudo chgrp kegs /usr/local/bin/xkegs
#DISABLE# sudo chmod u+s /usr/local/bin/xkegs
#DISABLE#
#DISABLE# sudo wget -qO /usr/local/bin/kegs ${scriptURL}setup/kegs.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/kegs
#DISABLE# sudo wget -qO /usr/local/bin/kegs-setup ${scriptURL}setup/kegs-setup-shell.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/kegs-setup
#DISABLE#
#DISABLE#
#DISABLE# # GSport, if non-RPi
#DISABLE# if [[ ! $isRpi && ! -f /usr/local/bin/gsport ]]; then
#DISABLE# echo "A2CLOUD: Installing GSport..."
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# if [[ $downloadBinaries ]]; then
#DISABLE# sudo apt-get -y install libpcap0.8-dev &> /dev/null
#DISABLE# sudo apt-get -y clean
#DISABLE# if [[ $isDebian ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/gsport-debian7_x86.tgz | sudo tar Pzx 2> /dev/null
#DISABLE# fi
#DISABLE# fi
#DISABLE# if ! command -v gsport >/dev/null; then
#DISABLE# echo "A2CLOUD: Building GSport from source..."
#DISABLE# sudo apt-get -y install build-essential &> /dev/null
#DISABLE# sudo apt-get -y install libx11-dev libxext-dev xfonts-base libpcap0.8-dev &> /dev/null
#DISABLE# sudo apt-get -y clean > /dev/null
#DISABLE# mkdir -p /tmp/a2cloud-install/gsport
#DISABLE# cd /tmp/a2cloud-install/gsport
#DISABLE# wget -q -O gsport.tgz http://downloads.sourceforge.net/project/gsport/GSport-0.31/gsport_0.31.tar.gz
#DISABLE# tar zxf gsport.tgz
#DISABLE# cd gsport*/src
#DISABLE# rm vars 2> /dev/null
#DISABLE# ln -s vars_x86linux vars
#DISABLE# make &> /dev/null
#DISABLE# gcc -o ../to_pro to_pro.c &> /dev/null
#DISABLE# gcc -o ../partls partls.c &> /dev/null
#DISABLE# sudo cp -P ../gsportx ../to_pro ../partls /usr/local/bin
#DISABLE# sudo cp ../config.txt /usr/local/lib
#DISABLE# sudo chmod ugo+w /usr/local/lib/config.txt
#DISABLE# make clean &> /dev/null
#DISABLE# rm vars
#DISABLE# cp vars_fbrpilinux vars
#DISABLE# sed -i 's/-march=armv6/-march=i686/' vars
#DISABLE# make &> /dev/null
#DISABLE# sudo cp -P ../gsportfb /usr/local/bin
#DISABLE# cd /usr/local/lib
#DISABLE# sudo ln -s config.txt gsport_config.txt 2> /dev/null
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# rm -rf gsport
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ $slot6 ]]; then
#DISABLE# echo "A2CLOUD: Putting blank disks in GSport slot 6..."
#DISABLE# sudo sed -i 's@^s6d1.*$@s6d1 = /usr/local/share/gsdisks/slot6drive1.po@' /usr/local/lib/config.txt
#DISABLE# sudo sed -i 's@^s6d2.*$@s6d2 = /usr/local/share/gsdisks/slot6drive2.po@' /usr/local/lib/config.txt
#DISABLE# if [[ ! -f /usr/local/share/gsdisks/slot6drive1.po || ! -f /usr/local/share/gsdisks/slot6drive2.po ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/slot6.tgz | sudo tar Pzx 2> /dev/null
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE# # enable AppleTalk
#DISABLE# if ! grep -q 'g_appletalk_turbo' /usr/local/lib/config.txt; then
#DISABLE# if grep -q 'bram1[00]' /usr/local/lib/config.txt; then
#DISABLE# sudo sed -i 's/^\(bram1\[00\]\)/g_appletalk_turbo = 1\n\n\1/' /usr/local/lib/config.txt
#DISABLE# else
#DISABLE# echo -e '\ng_appletalk_turbo = 1' | sudo tee -a /usr/local/lib/config.txt > /dev/null
#DISABLE# fi
#DISABLE# fi
#DISABLE# sudo sed -i 's/g_appletalk_turbo = 0/g_appletalk_turbo = 1/' /usr/local/lib/config.txt
#DISABLE#
#DISABLE# # enable Uthernet
#DISABLE# if ! grep -q 'g_ethernet[^_]' /usr/local/lib/config.txt; then
#DISABLE# if grep -q 'bram1[00]' /usr/local/lib/config.txt; then
#DISABLE# sudo sed -i 's/^\(bram1\[00\]\)/g_ethernet = 1\n\n\1/' config.txt
#DISABLE# else
#DISABLE# echo -e '\ng_ethernet = 1' | sudo tee -a /usr/local/lib/config.txt > /dev/null
#DISABLE# fi
#DISABLE# fi
#DISABLE# sudo sed -i 's/g_ethernet = 0/g_ethernet = 1/' /usr/local/lib/config.txt
#DISABLE# else
#DISABLE# [[ ! $isRpi ]] && echo "A2CLOUD: GSport is already installed."
#DISABLE# fi
#DISABLE# if [[ ! $isRpi ]]; then
#DISABLE# echo "A2CLOUD: Updating GSport launch and setup files..."
#DISABLE#
#DISABLE# sudo addgroup gsport &> /dev/null
#DISABLE# sudo chgrp gsport /usr/local/bin/gsportfb
#DISABLE# sudo chmod u+s /usr/local/bin/gsportfb
#DISABLE# sudo chgrp gsport /usr/local/bin/gsportx
#DISABLE# sudo chmod u+s /usr/local/bin/gsportx
#DISABLE#
#DISABLE# sudo wget -qO /usr/local/bin/gsport ${scriptURL}setup/gsport.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/gsport
#DISABLE# sudo wget -qO /usr/local/bin/gsport-setup ${scriptURL}setup/gsport-setup-shell.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/gsport-setup
#DISABLE# fi
#DISABLE#
#DISABLE#
#DISABLE# # LinApple
#DISABLE# if ! command -v linapple >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing LinApple..."
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# if [[ $downloadBinaries ]]; then
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/linapple-rpi.tgz | sudo tar Pzx
#DISABLE# elif [[ $isDebian ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/linapple-debian7_x86.tgz | sudo tar Pzx
#DISABLE# fi
#DISABLE# fi
#DISABLE# if ! command -v linapple >/dev/null; then
#DISABLE# sudo apt-get -y install build-essential
#DISABLE# sudo apt-get -y install libsdl1.2-dev libcurl4-openssl-dev zlib1g-dev libzip-dev
#DISABLE# sudo apt-get -y clean
#DISABLE# rm -rf /tmp/a2cloud-install/linapple* &> /dev/null
#DISABLE# mkdir -p /tmp/a2cloud-install/linapple
#DISABLE# cd /tmp/a2cloud-install/linapple
#DISABLE# wget -q -O linapple.tar.bz2 http://downloads.sourceforge.net/project/linapple/linapple/linapple-2a/linapple-src_2a.tar.bz2
#DISABLE# tar jxf linapple.tar.bz2
#DISABLE# cd linapple-src_2a/src
#DISABLE# # doesn't compile with gcc 4.7, so use older version
#DISABLE# if (( $(g++ --version | head -1 | rev | cut -f 1 -d ' ' | rev | tr -d '.') >= 470 )); then
#DISABLE# sudo apt-get -y install g++-4.6
#DISABLE# sudo apt-get -y clean
#DISABLE# sed -i 's@CXX ?= c++@CXX = /usr/bin/g++-4.6@' Makefile
#DISABLE# fi
#DISABLE# make
#DISABLE# sudo make install
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# rm -rf linapple
#DISABLE# fi
#DISABLE# else
#DISABLE# echo "A2CLOUD: LinApple is already installed."
#DISABLE# fi
#DISABLE# echo "A2CLOUD: Updating LinApple launch file..."
#DISABLE# sudo wget -qO /usr/local/bin/linapple ${scriptURL}setup/linapple.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/linapple
#DISABLE#
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ $installArchiveTools ]]; then
#DISABLE#
#DISABLE# if [[ ! -f /usr/local/bin/nulib2 || ! -f /usr/local/bin/sciibin || ! -f /usr/local/bin/usq ]]; then
#DISABLE# if ! command -v nulib2 >/dev/null; then
#DISABLE#
#DISABLE# echo "A2CLOUD: Installing nulib2..."
#DISABLE#
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# if [[ $downloadBinaries ]]; then
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/nulib2-rpi.tgz | sudo tar Pzx
#DISABLE# elif [[ $isDebian ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/nulib2-debian7_x86.tgz | sudo tar Pzx
#DISABLE# fi
#DISABLE# fi
#DISABLE# if ! command -v nulib2 >/dev/null; then
#DISABLE# sudo apt-get -y install build-essential
#DISABLE# sudo apt-get -y install zlib1g-dev
#DISABLE# sudo apt-get -y clean
#DISABLE#
#DISABLE# # install nulib2
#DISABLE# rm -rf nulib &> /dev/null
#DISABLE# mkdir -p nulib
#DISABLE# cd nulib
#DISABLE# wget -qO nulib.tgz http://web.archive.org/web/20131031160750/http://www.nulib.com/downloads/nulibdist.tar.gz
#DISABLE# tar zxf nulib.tgz
#DISABLE# cd nufxlib*
#DISABLE# ./configure
#DISABLE# make
#DISABLE# sudo make install
#DISABLE# cd ../nulib2*
#DISABLE# ./configure
#DISABLE# make
#DISABLE# sudo make install
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# rm -rf nulib
#DISABLE# fi
#DISABLE# else
#DISABLE# echo "A2CLOUD: nulib2 is already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# if ! command -v sciibin >/dev/null; then
#DISABLE#
#DISABLE# echo "A2CLOUD: Installing sciibin, unblu, unbit, unexec, usq..."
#DISABLE#
#DISABLE# sudo apt-get -y install build-essential
#DISABLE# sudo apt-get -y clean
#DISABLE# rm -rf undoit &> /dev/null
#DISABLE# mkdir -p undoit
#DISABLE# cd undoit
#DISABLE# wget -q http://web.archive.org/web/20110619163030/http://fadden.com/dl-apple2/undoit.zip
#DISABLE# unzip undoit.zip
#DISABLE# make
#DISABLE# sudo mv sciibin unbit unblu unexec usq /usr/local/bin
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# rm -rf undoit
#DISABLE# else
#DISABLE# echo "A2CLOUD: sciibin, unblu, unbit, unexec, usq are already installed."
#DISABLE# fi
#DISABLE#
#DISABLE# echo "A2CLOUD: Setting up shk2image command..."
#DISABLE# sudo wget -qO /usr/local/bin/shk2image ${scriptURL}setup/shk2image.txt
#DISABLE# sudo chmod ugo+x /usr/local/bin/shk2image
#DISABLE#
#DISABLE# # download and install The Unarchiver, for expanding apple.com disk images
#DISABLE# # http://wakaba.c3.cx/s/apps/unarchiver.html
#DISABLE# if ! command -v unar >/dev/null; then
#DISABLE# echo "A2CLOUD: Installing The Unarchiver..."
#DISABLE# if apt-cache show unar &>/dev/null; then
#DISABLE# sudo apt-get -y install unar
#DISABLE# else
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# if [[ $downloadBinaries ]]; then
#DISABLE# if [[ $isRpi || $isDebian ]]; then
#DISABLE# sudo apt-get -y install libgnustep-base1.22
#DISABLE# sudo apt-get -y clean
#DISABLE# if [[ $isRpi ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/unar-rpi.tgz | sudo tar Pzx
#DISABLE# elif [[ $isDebian ]]; then
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/unar-debian7_x86.tgz | sudo tar Pzx
#DISABLE# fi
#DISABLE# fi
#DISABLE# fi
#DISABLE# if ! command -v unar >/dev/null; then
#DISABLE# sudo apt-get -y install build-essential
#DISABLE# sudo apt-get -y install libgnustep-base-dev libz-dev libbz2-dev
#DISABLE# sudo apt-get -y install libssl-dev libicu-dev unzip
#DISABLE# sudo apt-get -y clean
#DISABLE# rm -rf unar &> /dev/null
#DISABLE# mkdir -p unar
#DISABLE# cd unar
#DISABLE# wget -q -nc http://theunarchiver.googlecode.com/files/unar1.7_src.zip
#DISABLE# unzip -o unar1.7_src.zip
#DISABLE# cd The\ Unarchiver/XADMaster
#DISABLE# make -f Makefile.linux
#DISABLE# sudo mv lsar unar /usr/local/bin
#DISABLE# cd ../Extra
#DISABLE# sudo mkdir -p /usr/local/man/man1
#DISABLE# sudo mv lsar.1 unar.1 /usr/local/man/man1
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# rm -rf unar
#DISABLE# fi
#DISABLE# sudo mandb &> /dev/null
#DISABLE# fi
#DISABLE# else
#DISABLE# echo "A2CLOUD: The Unarchiver is already installed."
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE# # add shortcuts to LXDE desktop and menu
#DISABLE# if command -v X >/dev/null; then
#DISABLE#
#DISABLE# [[ -d /etc/xdg/lxsession/LXDE-pi ]] && lxde="lxde-pi" || lxde="lxde"
#DISABLE# echo "A2CLOUD: Creating LXDE desktop and menu shortcuts..."
#DISABLE#
#DISABLE# # remove auto-open Terminal window from pre-1.8.0
#DISABLE# echo "A2CLOUD: removing auto-open LXDE terminal window (if present)..."
#DISABLE# sudo rm /etc/xdg/autostart/lxterminal.desktop 2> /dev/null
#DISABLE#
#DISABLE# # create "AppleII" category
#DISABLE# mkdir -p ~/.config/menus
#DISABLE# if [[ ! -f ~/.config/menus/${lxde}-applications.menu ]]; then
#DISABLE# mkdir -p ~/.config/menus
#DISABLE# echo -e "<!DOCTYPE Menu PUBLIC \"-//freedesktop//DTD Menu 1.0//EN\" \"http://www.freedesktop.org/standards/menu-spec/1.0/menu.dtd\">\n<Menu>\n <Name>A2CLOUD menu extension</Name>\n <MergeFile type=\"parent\">/etc/xdg/menus/${lxde}-applications.menu</MergeFile>\n <Menu>\n <Name>Apple II</Name>\n <Directory>lxde-appleii.directory</Directory>\n <Include>\n <And><Category>AppleII</Category></And>\n </Include>\n </Menu>\n</Menu>\n" > ~/.config/menus/${lxde}-applications.menu
#DISABLE# else
#DISABLE# grep -q AppleII ~/.config/menus/${lxde}-applications.menu || echo "A2CLOUD: LXDE child category file exists, not creating Apple II category."
#DISABLE# fi
#DISABLE# # create "Apple II" menu entry
#DISABLE# sudo mkdir -p /usr/local/share/desktop-directories
#DISABLE# echo -e "[Desktop Entry]\nName=Apple II\nComment=Programs and utilities related to the Apple II\nIcon=/usr/local/linapple/icon.bmp\nType=Directory\n" | sudo tee /usr/local/share/desktop-directories/lxde-appleii.directory > /dev/null
#DISABLE# # create menu and desktop shortcuts
#DISABLE# sudo mkdir -p /usr/local/share/applications
#DISABLE# # create user desktop items folder
#DISABLE# mkdir -p ~/Desktop
#DISABLE# # GSport:
#DISABLE# GSPORT_PATH="$(command -v gsport)"
#DISABLE# if [ "$GSPORT_PATH" != "" ]; then
#DISABLE# echo -e "[Desktop Entry]\nName=GSport\nComment=Apple IIgs Emulator\nExec=lxterminal -e $GSPORT_PATH\nIcon=/usr/local/share/gsport32.ico\nTerminal=false\nType=Application\nCategories=AppleII\n" | sudo tee /usr/local/share/applications/gsport.desktop > ~/Desktop/gsport.desktop
#DISABLE# fi
#DISABLE# if [[ ! -f /usr/local/share/gsport32.ico ]]; then
#DISABLE# sudo wget -qO /usr/local/share/gsport32.ico http://appleii.ivanx.com/a2cloud/files/gsport32.ico
#DISABLE# fi
#DISABLE# # KEGS:
#DISABLE# KEGS_PATH="$(command -v kegs)"
#DISABLE# if [ "KEGS_PATH" != "" ]; then
#DISABLE# echo -e "[Desktop Entry]\nName=KEGS\nComment=Apple IIgs Emulator\nExec=lxterminal -e $KEGS_PATH\nIcon=/usr/local/share/kegsicon.png\nTerminal=false\nType=Application\nCategories=AppleII\n" | sudo tee /usr/local/share/applications/kegs.desktop > /dev/null
#DISABLE# [[ ! -f ~/Desktop/gsport.desktop ]] && cp /usr/local/share/applications/kegs.desktop ~/Desktop/kegs.desktop
#DISABLE# fi
#DISABLE# if [[ ! -f /usr/local/share/kegsicon.png ]]; then
#DISABLE# sudo wget -qO /usr/local/share/kegsicon.png http://appleii.ivanx.com/a2cloud/files/kegsicon.png
#DISABLE# fi
#DISABLE# # LinApple:
#DISABLE# LINAPPLE_PATH="$(command -v linapple)"
#DISABLE# if [ "LINAPPLE_PATH" != "" ]; then
#DISABLE# echo -e "[Desktop Entry]\nName=LinApple\nComment=Apple IIe Emulator\nExec=lxterminal -e $LINAPPLE_PATH\nIcon=/usr/local/linapple/icon.bmp\nTerminal=false\nType=Application\nCategories=AppleII\n" | sudo tee /usr/local/share/applications/linapple.desktop > ~/Desktop/linapple.desktop
#DISABLE# fi
#DISABLE# # ADTPro Server:
#DISABLE# ADTPRO_PATH="$(command -v adtpro.sh)"
#DISABLE# if [ "ADTPRO_PATH" != "" ]; then
#DISABLE# echo -e "[Desktop Entry]\nName=ADTPro Server\nComment=Floppy Transfer Utility\nExec=$ADTPRO_PATH\nIcon=/usr/local/adtpro/lib/ADTPro.ico\nTerminal=false\nType=Application\nCategories=AppleII\n" | sudo tee /usr/local/share/applications/adtproserver.desktop > ~/Desktop/adtproserver.desktop
#DISABLE# fi
#DISABLE# # LXTerminal:
#DISABLE# if [[ ! $(grep lxterminal.desktop /etc/xdg/lxpanel/profile/LXDE-pi/panels/panel 2> /dev/null) && ! -f ~/Desktop/lxterminal.desktop ]]; then
#DISABLE# cp /usr/share/applications/lxterminal.desktop ~/Desktop/lxterminal.desktop
#DISABLE# fi
#DISABLE# # prevent PolicyKit error on GUI startup
#DISABLE# sudo sed -i 's/^NotShowIn=GNOME;KDE;\?$/NotShowIn=GNOME;KDE;LXDE/' /etc/xdg/autostart/lxpolkit.desktop 2> /dev/null
#DISABLE# sed -i 's/^NotShowIn=GNOME;KDE;\?$/NotShowIn=GNOME;KDE;LXDE/' /home/$USER/.config/autostart/lxpolkit.desktop 2> /dev/null
#DISABLE# fi
#DISABLE#
#DISABLE#
#DISABLE# # create A2CLOUD disk
#DISABLE#
#DISABLE# if [[ ( $updateADTPro || $createBootDisk ) && -f /usr/local/bin/acmd ]]; then
#DISABLE# a2CloudDisk=/usr/local/adtpro/disks/A2CLOUD.PO
#DISABLE# else
#DISABLE# a2CloudDisk=
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ $a2CloudDisk ]]; then
#DISABLE# echo
#DISABLE# echo "A2CLOUD: Preparing A2CLOUD disk images..."
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# a2CloudDisk140=${a2CloudDisk%%.*}.DSK
#DISABLE# if [[ ! -f $a2CloudDisk && ! -f $a2CloudDisk140 ]]; then
#DISABLE# makeA2CloudDisk=1
#DISABLE# else
#DISABLE# [[ -f $a2CloudDisk ]] && echo "A2CLOUD: $a2CloudDisk already exists."
#DISABLE# [[ -f $a2CloudDisk140 ]] && echo "A2CLOUD: $a2CloudDisk140 already exists."
#DISABLE# echo " If you want a fresh copy, please move or delete as needed."
#DISABLE# makeA2CloudDisk=
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ ! $makeA2CloudDisk ]]; then # not getting/building disks
#DISABLE#
#DISABLE# a2CloudDiskUpdated=
#DISABLE# if [[ $updateADTPro && -f "$a2CloudDisk" ]]; then # does existing 800K disk need updating?
#DISABLE# sudo pkill -f [A]DTPro
#DISABLE# echo "A2CLOUD: Updating ADTPro and VDrive on 800K A2CLOUD disk..."
#DISABLE# acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VEDRIVE - | acmd -p "$a2CloudDisk" VEDRIVE SYS
#DISABLE# acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPROAUD - | acmd -p "$a2CloudDisk" ADTPROAUD SYS
#DISABLE# acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPROETH - | acmd -p "$a2CloudDisk" ADTPROETH SYS
#DISABLE# acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPRO.BIN - | acmd -p "$a2CloudDisk" ADTPRO.BIN BIN \$0800
#DISABLE# acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPROAUD.BIN - | acmd -p "$a2CloudDisk" ADTPROAUD.BIN SYS \$0800
#DISABLE# acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPROETH.BIN - | acmd -p "$a2CloudDisk" ADTPROETH.BIN SYS \$0800
#DISABLE# acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VEDRIVE.CONFIG - | acmd -p "$a2CloudDisk" VEDRIVE.CONFIG BAS
#DISABLE# acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPRO - | acmd -p "$a2CloudDisk" ADTPRO SYS
#DISABLE# acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE - | acmd -p "$a2CloudDisk" VSDRIVE SYS
#DISABLE# acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE.LOW - | acmd -p "$a2CloudDisk" VSDRIVE.LOW SYS
#DISABLE# a2CloudDiskUpdated=1
#DISABLE# fi
#DISABLE# if [[ $updateADTPro && -f "$a2CloudDisk140" ]]; then # does existing 140K disk need updating?
#DISABLE# sudo pkill -f [A]DTPro
#DISABLE# echo "A2CLOUD: Updating ADTPro and VDrive on 140K A2CLOUD disk..."
#DISABLE# acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPRO.BIN - | acmd -p "$a2CloudDisk140" ADTPRO.BIN BIN \$0800
#DISABLE# acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPRO - | acmd -p "$a2CloudDisk140" ADTPRO SYS
#DISABLE# acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE - | acmd -p "$a2CloudDisk140" VSDRIVE SYS
#DISABLE# acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE.LOW - | acmd -p "$a2CloudDisk140" VSDRIVE.LOW SYS
#DISABLE# a2CloudDiskUpdated=1
#DISABLE# fi
#DISABLE# if [[ $a2CloudDiskUpdated ]]; then
#DISABLE# echo
#DISABLE# echo "Your A2CLOUD boot disk images have been updated. You may want"
#DISABLE# echo " to update your boot floppy with their current contents using ADTPro."
#DISABLE# fi
#DISABLE# echo
#DISABLE# else # building or downloading disks
#DISABLE# sudo pkill -f [A]DTPro
#DISABLE# if [[ ! $buildA2CloudDisk ]]; then
#DISABLE# echo "A2CLOUD: Downloading 800K disk image..."
#DISABLE# wget -qO $a2CloudDisk http://appleii.ivanx.com/a2cloud/files/A2CLOUD.PO
#DISABLE# echo "A2CLOUD: Downloading 140K disk image..."
#DISABLE# wget -qO $a2CloudDisk140 http://appleii.ivanx.com/a2cloud/files/A2CLOUD.DSK
#DISABLE# fi
#DISABLE#
#DISABLE# # build if we don't have a disk image
#DISABLE# # (because download failed or -b argument was used)
#DISABLE# if [[ ! -f $a2CloudDisk || ( $(wc -c $a2CloudDisk | cut -f 1 -d ' ') != "819200" ) ]]; then
#DISABLE#
#DISABLE# # start with a disk image
#DISABLE# echo "A2CLOUD: Creating 800K disk image..."
#DISABLE# cp /usr/local/adtpro/disks/ADTPRO-*PO $a2CloudDisk
#DISABLE# acmd -n $a2CloudDisk A2CLOUD
#DISABLE#
#DISABLE# # ADTPro
#DISABLE# echo "A2CLOUD: Preparing ADTPro..."
#DISABLE#
#DISABLE# acmd -d "$a2CloudDisk" BASIC
#DISABLE# acmd -d "$a2CloudDisk" STARTUP.SYSTEM
#DISABLE# acmd -d "$a2CloudDisk" ADTPRO
#DISABLE#
#DISABLE# gsosURL="http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English-North_American/Apple_II/Apple_IIGS_System_6.0.1/"
#DISABLE# gsosBackupURL="http://archive.org/download/download.info.apple.com.2012.11/download.info.apple.com.2012.11.zip/download.info.apple.com%2FApple_Support_Area%2FApple_Software_Updates%2FEnglish-North_American%2FApple_II%2FApple_IIGS_System_6.0.1%2F"
#DISABLE#
#DISABLE# # start from ADTPro distribution image and replace BASIC.SYSTEM 1.4.1 with 1.5
#DISABLE# wget --max-redirect 0 -qO Disk_3_of_7-SystemTools1.sea.bin ${gsosURL}Disk_3_of_7-SystemTools1.sea.bin
#DISABLE# if (( $? != 0 )); then
#DISABLE# wget -qO Disk_3_of_7-SystemTools1.sea.bin ${gsosBackupURL}Disk_3_of_7-SystemTools1.sea.bin
#DISABLE# fi
#DISABLE# unar -k skip Disk_3_of_7-SystemTools1.sea.bin &> /dev/null
#DISABLE# mv 'Disk 3 of 7-SystemTools1.sea' SystemTools1.dc42
#DISABLE# acmd -g SystemTools1.dc42 BASIC.SYSTEM - | acmd -p "$a2CloudDisk" BASIC.SYSTEM SYS
#DISABLE# # use our startup program
#DISABLE# wget -qO- http://appleii.ivanx.com/a2cloud/files/STARTUP.BAS | acmd -p "$a2CloudDisk" STARTUP BAS
#DISABLE#
#DISABLE# # VEDRIVE
#DISABLE# echo "A2CLOUD: Copying VEDRIVE..."
#DISABLE# acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VEDRIVE - | acmd -p "$a2CloudDisk" VEDRIVE SYS
#DISABLE# acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VEDRIVE.CONFIG - | acmd -p "$a2CloudDisk" VEDRIVE.CONFIG BAS
#DISABLE#
#DISABLE# sysutilsURL="http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/English-North_American/Apple_II/Apple_II_Supplemental/"
#DISABLE# sysutilsBackupURL="http://archive.org/download/download.info.apple.com.2012.11/download.info.apple.com.2012.11.zip/download.info.apple.com%2FApple_Support_Area%2FApple_Software_Updates%2FEnglish-North_American%2FApple_II%2FApple_II_Supplemental%2F"
#DISABLE#
#DISABLE# # Apple System Utilities 3.1 support files
#DISABLE# if command -v unar >/dev/null; then
#DISABLE# echo "A2CLOUD: Downloading and copying System Utilities support files..."
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# wget --max-redirect 0 -qO Apple_II_System_Disk_3.2.sea.bin ${sysutilsURL}Apple_II_System_Disk_3.2.sea.bin
#DISABLE# if (( $? != 0 )); then
#DISABLE# wget -qO Apple_II_System_Disk_3.2.sea.bin ${sysutilsBackupURL}Apple_II_System_Disk_3.2.sea.bin
#DISABLE# fi
#DISABLE# unar -k skip Apple_II_System_Disk_3.2.sea.bin &> /dev/null
#DISABLE# dd if='Apple II System Disk 3.2.sea' of=A2SYSDISK32.PO bs=1 skip=84 count=819200 2> /dev/null
#DISABLE# acmd -g A2SYSDISK32.PO UTIL.0 - | acmd -p "$a2CloudDisk" UTIL.0 BIN \$0900
#DISABLE# acmd -g A2SYSDISK32.PO UTIL.1 - | acmd -p "$a2CloudDisk" UTIL.1 BIN \$0E00
#DISABLE# acmd -g A2SYSDISK32.PO UTIL.2 - | acmd -p "$a2CloudDisk" UTIL.2 BIN \$B400
#DISABLE# else
#DISABLE# echo "A2CLOUD: unar is not available; not installing System Utilities support files."
#DISABLE# fi
#DISABLE#
#DISABLE# # ProTERM
#DISABLE# echo "A2CLOUD: Downloading ProTERM..."
#DISABLE# wget --user-agent="Mozilla/5.0 (wget_A2CLOUD; rv:1.13.4) Gecko/20100101 Firefox/4.0.1" -qO /tmp/a2cloud-install/pt31.shk http://lostclassics.apple2.info/download/InTrec/PT31A2GM2K9.SHK
#DISABLE# mkdir -p /tmp/a2cloud-install/pt31
#DISABLE# cd /tmp/a2cloud-install/pt31
#DISABLE# nulib2 -xse ../pt31.shk > /dev/null
#DISABLE# # IIc slot 1 patch for ProTERM from Hugh Hood
#DISABLE# echo "A2CLOUD: Patching ProTERM for IIc printer port use..."
#DISABLE# writecharsHex "PT3.CODE0#060000" 1638 "41.70.70.6C.65.20.49.49.63.2F.49.49.63.2B.20.50.72.69.6E.74.65.72.20.50.6F.72.74.20.20.20.20.20.06.07.10.41.70.70.6C.65.20.49.49.63.2F.49.49.63.2B.20.4D.6F.64.65.6D.20.50.6F.72.74.20.20.20.20.20.20.20.06.07.20"
#DISABLE# echo "A2CLOUD: Copying ProTERM..."
#DISABLE# for thisFile in /tmp/a2cloud-install/pt31/*; do
#DISABLE# filenameUnix="${thisFile##*/}"
#DISABLE# filename="${filenameUnix%%#*}"
#DISABLE# filetype="${filenameUnix##*#}"
#DISABLE# if [[ $filename != "PT3.DIAL" && $filename != "ProDOS" && $filename != "PT3.BACKUP" && $filename != "PT3.SYSTEM" ]]; then
#DISABLE# acmd -p "$a2CloudDisk" $filename \$${filetype:0:2} \$${filetype:2:4} < $thisFile
#DISABLE# fi
#DISABLE# done
#DISABLE# acmd -p "$a2CloudDisk" PT3.DIAL/PTD.SPACEBAR COM \$8002 < /tmp/a2cloud-install/pt31/PT3.DIAL/"PTD.SPACEBAR#598002"
#DISABLE# echo "A2CLOUD: Adding 115200 baud macros for ProTERM..."
#DISABLE# wget -qO PT3.IIC.MACRO http://appleii.ivanx.com/a2cloud/files/PT3.IIC.MACRO.txt
#DISABLE# cat "PT3.GLOBAL#040000" | tr '\r' '\n' | sed ':a;N;$!ba;s/\n\*\nOPTION-f : Unused & available.\n\*/~~~/' | sed -e '/~~~/r PT3.IIC.MACRO' -e 's///' | tr '\n' '\r' | acmd -p "$a2CloudDisk" PT3.IIC.GLOBAL TXT
#DISABLE# wget -qO PT3.IIE.MACRO http://appleii.ivanx.com/a2cloud/files/PT3.IIE.MACRO.txt
#DISABLE# cat "PT3.GLOBAL#040000" | tr '\r' '\n' | sed ':a;N;$!ba;s/\n\*\nOPTION-f : Unused & available.\n\*/~~~/' | sed -e '/~~~/r PT3.IIE.MACRO' -e 's///' | tr '\n' '\r' | acmd -p "$a2CloudDisk" PT3.IIE.GLOBAL TXT
#DISABLE# wget -qO PT3.IIGS.MACRO http://appleii.ivanx.com/a2cloud/files/PT3.IIGS.MACRO.txt
#DISABLE# cat "PT3.GLOBAL#040000" | tr '\r' '\n' | sed ':a;N;$!ba;s/\n\*\nOPTION-h : Unused & available.\n\*\n\n\*\nOPTION-H : Unused & available.\n\*/~~~/' | sed -e '/~~~/r PT3.IIGS.MACRO' -e 's///' | tr '\n' '\r' | acmd -p "$a2CloudDisk" PT3.IIGS.GLOBAL TXT
#DISABLE# acmd -p "$a2CloudDisk" PROTERM SYS < /tmp/a2cloud-install/pt31/"PT3.SYSTEM#ff2000"
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# rm -rf /tmp/a2cloud-install/pt31
#DISABLE#
#DISABLE# # Z-Link
#DISABLE# echo "A2CLOUD: Downloading and copying Z-Link..."
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# wget -qO /tmp/a2cloud-install/zlink.shk "ftp://ftp.gno.org/pub/apple2/prodos/comm/term/zLink91.shk"
#DISABLE# nulib2 -p zlink.shk z.link.system | acmd -p "$a2CloudDisk" Z.LINK SYS
#DISABLE#
#DISABLE# # ShrinkIt
#DISABLE# echo "A2CLOUD: Downloading and copying ShrinkIt..."
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# wget -qO shrinkit.sdk http://web.archive.org/web/20131031160750/http://www.nulib.com/library/shrinkit.sdk
#DISABLE# [[ ! -f shrinkit.sdk ]] && wget -qO shrinkit.sdk http://appleii.ivanx.com/a2cloud/files/shrinkit.sdk
#DISABLE# nulib2 -xs shrinkit.sdk > /dev/null
#DISABLE# acmd -g /tmp/a2cloud-install/SHRINKIT SHRINKIT - | acmd -p "$a2CloudDisk" SHRINKIT SYS
#DISABLE# acmd -g /tmp/a2cloud-install/SHRINKIT SHRINKIT.SYSTEM - | acmd -p "$a2CloudDisk" SHRINKIT.SYS SYS
#DISABLE# acmd -g /tmp/a2cloud-install/SHRINKIT IIPLUS.SHRINKIT - | acmd -p "$a2CloudDisk" IIPLUS.SHRINKIT SYS
#DISABLE# acmd -g /tmp/a2cloud-install/SHRINKIT IIPLUS.UNSHRINK - | acmd -p "$a2CloudDisk" IIPLUS.UNSHRINK SYS
#DISABLE#
#DISABLE# # DSK2FILE
#DISABLE# echo "A2CLOUD: Downloading and copying DSK2FILE..."
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# wget -q -O dsk2file.shk http://www.dwheeler.com/6502/oneelkruns/dsk2file.zip
#DISABLE# nulib2 -p dsk2file.shk dsk2file58 | acmd -p "$a2CloudDisk" DSK2FILE SYS
#DISABLE#
#DISABLE# # Apple System Utilities 3.1 launch file
#DISABLE# if command -v unar >/dev/null; then
#DISABLE# echo "A2CLOUD: Copying System Utilities launch file..."
#DISABLE# acmd -g A2SYSDISK32.PO SYSUTIL.SYSTEM - | acmd -p "$a2CloudDisk" SYSUTIL SYS
#DISABLE# else
#DISABLE# echo "A2CLOUD: unar is not available; not installing System Utilities."
#DISABLE# fi
#DISABLE#
#DISABLE# # Filer
#DISABLE# echo "A2CLOUD: Downloading and copying Filer..."
#DISABLE# wget -qO /tmp/a2cloud-install/mmgr.prutil.sdk ftp://ftp.gno.org/pub/apple2/prodos/comm/term/modem.mgr/mmgr.prutil.sdk
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# nulib2 -xs mmgr.prutil.sdk > /dev/null
#DISABLE# acmd -g /tmp/a2cloud-install/MMGR FILER - | acmd -p "$a2CloudDisk" FILER SYS
#DISABLE#
#DISABLE# # ADTPRO launch
#DISABLE# echo "A2CLOUD: Copying ADTPro launch file..."
#DISABLE# acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPRO - | acmd -p "$a2CloudDisk" ADTPRO SYS
#DISABLE#
#DISABLE# # VSDRIVE
#DISABLE# if [[ ! $(acmd -ls "$a2CloudDisk" | grep '^VSDRIVE BIN') ]]; then
#DISABLE# echo "A2CLOUD: Copying VSDRIVE..."
#DISABLE# acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE - | acmd -p "$a2CloudDisk" VSDRIVE SYS
#DISABLE# acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE.LOW - | acmd -p "$a2CloudDisk" VSDRIVE.LOW BIN \$2000
#DISABLE# else
#DISABLE# echo "A2CLOUD: VSDRIVE is already on the target disk image."
#DISABLE# fi
#DISABLE#
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ ! -f $a2CloudDisk140 || ( $(wc -c $a2CloudDisk140 | cut -f 1 -d ' ') != "143360" ) ]]; then
#DISABLE#
#DISABLE# echo "A2CLOUD: Creating 140K disk image..."
#DISABLE# mkpo "$a2CloudDisk140" A2CLOUD
#DISABLE# dd bs=256 count=1 of="$a2CloudDisk140" conv=notrunc 2> /dev/null < /usr/local/adtpro/disks/ADTPRO-*DSK
#DISABLE# dd bs=256 count=1 of="$a2CloudDisk140" skip=14 seek=14 conv=notrunc 2> /dev/null < /usr/local/adtpro/disks/ADTPRO-*DSK
#DISABLE#
#DISABLE# acmd -g $a2CloudDisk BASIC.SYSTEM - | acmd -p $a2CloudDisk140 BASIC.SYSTEM SYS
#DISABLE# acmd -g $a2CloudDisk PRODOS - | acmd -p $a2CloudDisk140 PRODOS SYS
#DISABLE# acmd -g $a2CloudDisk STARTUP - | acmd -p $a2CloudDisk140 STARTUP BAS
#DISABLE# acmd -g $a2CloudDisk ADTPRO.BIN - | acmd -p $a2CloudDisk140 ADTPRO.BIN BIN \$0800
#DISABLE# acmd -g $a2CloudDisk Z.LINK - | acmd -p $a2CloudDisk140 Z.LINK SYS
#DISABLE# acmd -g $a2CloudDisk IIPLUS.SHRINKIT - | acmd -p $a2CloudDisk140 IIPLUS.SHRINKIT SYS
#DISABLE# acmd -g $a2CloudDisk IIPLUS.UNSHRINK - | acmd -p $a2CloudDisk140 IIPLUS.UNSHRINK SYS
#DISABLE# acmd -g $a2CloudDisk FILER - | acmd -p $a2CloudDisk140 FILER SYS
#DISABLE# acmd -g $a2CloudDisk ADTPRO - | acmd -p $a2CloudDisk140 ADTPRO SYS
#DISABLE# acmd -g $a2CloudDisk VSDRIVE - | acmd -p $a2CloudDisk140 VSDRIVE SYS
#DISABLE# acmd -g $a2CloudDisk VSDRIVE.LOW - | acmd -p $a2CloudDisk140 VSDRIVE.LOW BIN \$2000
#DISABLE#
#DISABLE# fi
#DISABLE#
#DISABLE# # A2PI
#DISABLE# if [[ ! $(acmd -ls "$a2CloudDisk" | grep '^ A2PI BIN') ]]; then
#DISABLE# echo "A2CLOUD: Downloading and copying A2PI client..."
#DISABLE# mkdir -p /tmp/a2cloud-install/a2pi
#DISABLE# cd /tmp/a2cloud-install/a2pi
#DISABLE# wget -qO a2pi.deb http://schmenk.is-a-geek.com/tarfiles/a2pi_armhf.deb
#DISABLE# # dpkg-deb --fsys-tarfile a2pi.deb | tar --strip-components=4 --wildcards -O -x ./usr/share/a2pi/A2PI*.PO > A2PI.PO
#DISABLE# dpkg-deb --fsys-tarfile a2pi.deb | tar --strip-components=4 --wildcards -x ./usr/share/a2pi/A2PI*.PO
#DISABLE# a2piImage=$(ls -1r A2PI*.PO | head -1)
#DISABLE# mkdir a2pidisk
#DISABLE# cppo -e "$a2piImage" a2pidisk &> /dev/null
#DISABLE# mv a2pidisk/A2PI* a2pidisk/A2PI
#DISABLE# cd a2pidisk/A2PI
#DISABLE# rm PRODOS* *A3* BASIC.SYSTEM*
#DISABLE# cd ..
#DISABLE# nulib2 -a -r -e ../a2pi.shk A2PI &> /dev/null
#DISABLE# cd ..
#DISABLE# shk2image a2pi.shk $a2CloudDisk &> /dev/null
#DISABLE# shk2image a2pi.shk $a2CloudDisk140 &> /dev/null
#DISABLE# cd /tmp/a2cloud-install
#DISABLE# rm -rf a2pi
#DISABLE# else
#DISABLE# echo "A2CLOUD: A2PI client is already on the target disk image."
#DISABLE# fi
#DISABLE#
#DISABLE# if [[ -f /usr/local/adtpro/disks/Virtual.po && ! -L /usr/local/adtpro/disks/Virtual.po ]]; then
#DISABLE# mv /usr/local/adtpro/disks/Virtual.po /usr/local/adtpro/disks/defaultVirtual.po &> /dev/null
#DISABLE# vsd1 -f /usr/local/adtpro/disks/defaultVirtual.po
#DISABLE# fi
#DISABLE# if [[ -f /usr/local/adtpro/disks/Virtual2.po && ! -L /usr/local/adtpro/disks/Virtual2.po ]]; then
#DISABLE# if [[ $(sha1sum /usr/local/adtpro/disks/Virtual2.po | cut -d ' ' -f 1) == "41c178f9f596f94ea7607624672552137dccade2" ]]; then
#DISABLE# rm /usr/local/adtpro/disks/Virtual2.po
#DISABLE# else
#DISABLE# mv /usr/local/adtpro/disks/Virtual2.po /usr/local/adtpro/disks/defaultVirtual2.po &> /dev/null
#DISABLE# fi
#DISABLE# fi
#DISABLE# vsd2 -f $a2CloudDisk
#DISABLE#
#DISABLE# # for compatibility with pre-1.6.7
#DISABLE# ln -s /usr/local/adtpro/disks/A2CLOUD.PO /usr/local/adtpro/disks/A2CLOUD.HDV
#DISABLE#
#DISABLE# echo
#DISABLE# echo "Your A2CLOUD disk images are ready. They are called"
#DISABLE# echo "A2CLOUD.DSK (140K) and A2CLOUD.PO (800K), and are stored in"
#DISABLE# echo "/usr/local/adtpro/disks"
#DISABLE# echo
#DISABLE# echo "You can transfer to a floppy with ADTPro, or access"
#DISABLE# echo "the 800K image with VSDRIVE at S2,D2."
#DISABLE# echo
#DISABLE# echo "See http://ivanx.com/a2cloud for more info."
#DISABLE# echo
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE#
#DISABLE#
#DISABLE# # make new blank disk of specified size
#DISABLE#
#DISABLE# if [[ $newImageName ]]; then
#DISABLE# echo "A2CLOUD: Creating new ${imageSize}K image for virtual drive 1 at"
#DISABLE# echo " /usr/local/adtpro/disks/$newImageName..."
#DISABLE# sudo pkill -f [A]DTPro
#DISABLE# rm /usr/local/adtpro/disks/Virtual.po &> /dev/null
#DISABLE# mkpo -b $(( $imageSize * 2 )) /usr/local/adtpro/disks/"$newImageName" $prodosVolName
#DISABLE# vsd1 -f /usr/local/adtpro/disks/"$newImageName"
#DISABLE# fi
#DISABLE#
#DISABLE# echo "wget -qO /tmp/a2cloud-setup http://appleii.ivanx.com/a2cloud/setup; source /tmp/a2cloud-setup" | sudo tee /usr/local/bin/a2cloud-setup > /dev/null
#DISABLE# sudo chmod ugo+x /usr/local/bin/a2cloud-setup
#DISABLE#
#DISABLE# if [[ ! $restartPrompt ]]; then
#DISABLE# adtpro-start 2> /dev/null #start ADTPro if not running and USB adapter attached
#DISABLE# fi
#DISABLE#
#DISABLE# echo
#DISABLE# echo "A2CLOUD is now ready!"
#DISABLE# echo "See http://ivanx.com/a2cloud for instructions."
#DISABLE#
#DISABLE# sudo apt-get -y clean
#DISABLE#
#DISABLE# if [[ $restartPrompt ]]; then
#DISABLE# echo
#DISABLE# echo -n "Restart your $me now (not required, but recommended)? "
#DISABLE# read
#DISABLE# if [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]]; then
#DISABLE# doRestart=1
#DISABLE# fi
#DISABLE# fi
#DISABLE#
#DISABLE# cd "$origDir"
#DISABLE# rm setup &> /dev/null
#DISABLE# rm a2cloud-setup &> /dev/null
#DISABLE# rm -rf /tmp/a2cloud-install &> /dev/null
#DISABLE# if command -v gsport >/dev/null || command -v kegs >/dev/null; then
#DISABLE# sudo addgroup gsport &> /dev/null
#DISABLE# sudo addgroup kegs &> /dev/null
#DISABLE# sudo usermod -a -G audio,video,netdev,fuse,gsport,plugdev,kegs $USER &> /dev/null
#DISABLE# [[ ! $noSetGroups ]] && { groups | grep -q 'kegs.*gsport\|gsport.*kegs' || exec sudo su -l $USER; }
#DISABLE# fi
#DISABLE# [[ $doRestart ]] && sudo shutdown -r now
Copy the archive setup.txt to the source tree
2015-10-30 10:38:11 +00:00
# version history:
# future -- local links for everything
# email
# chromium
# version history:
# 1.8.1 -- set JAVA_HOME correctly for Java 8 (Pi, webupd8, Ubuntu for Pi 2B)
# A2PI 1.5 (PiDrive update) on A2CLOUD disk
# ADTPro 2.0.1 server, and 2.0.1 client on A2CLOUD disk
# 1.8.0d-- √ creates shortcuts on desktop for GSport, KEGS, LinApple, ADTPro server on x86
# √ adds LXTerminal to desktop for non-A2Pi version
# √ ProDOS instruction screen on GSOS install
# √ provide via downloaded program that is dd notrunc'd over PRODOS (instead of writeCharsHex)
# √ figure out why lines in autostart are supposed to start with @ (daemon; restarts command on crash)
# √ install AppleCommander-1.3.5.13id (so Spectrum installer will work)
# √ fix mouse not working in VirtualBox framebuffer
# √ requires uninstalling (or temporarily disabling, if possible) VirtualBox guest additions
# √ can be activated if vboxguest module is unloaded *while gsport is running*
# √ offer to uninstall vboxguestmodule if gsport is in run console
# √ rename slot6drive1 and 2 to not contain "-blank" in slot6.tgz and gsport and kegs (x86) archives
# √ add links browser
# √ fix webupd8team getting added twice to sources.list
# √ install GSport for non-Pi
# √ figure out how to replace Raspbian entry in OS json dynamically
# √ command "a2cloud-update rasppleii" to update raspple ii
# √ prevent samba update causing dialog to come up
# √ create rasppleii-update
# √ make rasppleii-update universal even for non-Raspple II installs -- it's just raspbian-update + a2cloud-update + a2server-update
# √ creates shortcuts on desktop for GSport, KEGS, LinApple, ADTPro server on Pi
# √ download gsport and kegs icons
# √ no longer opens terminal window (since icons exist)
# √ (remove /etc/xdg/autostart/lxterminal.desktop)
# √ create aliases for raspbian-update and rasppleii-update
# √ update A2CLOUD help file and aliases for GSport
# √ create raspbian-update
# √ update a2cloud-help
# √ update motd (vm, raspple ii/a2cloud-pi) for gsport
# √ see if shortcuts work in Raspple II 110
# √ check for /etc/xdg/lxsession/LXDE-pi; if so:
# √ create ~/.config/menus/lxde-pi-applications.menu, with reference to /etc/xdg/menus/lxde-pi-applications.menu
# √ no xrandr VBOX0 on the Pi; remove it if present (a2cloud 1.7.x may have put it there)
# √ user groups for pi user not only apple2
# √ gsport-setup and kegs post install text to say ctrl-F12 for reboot
# √ add "links" to motd and help
# √ put a -Xmx128m in acmd so gsport and kegs setup work on Pi A/A+ (256 MB)
# √ added 'disablesafemode' to NOOBS recovery.cmdline (also in raspbian-update) to make it work on (at least) my A+
# √ option for GISK rather than clean setup for GSport on x86
# √ provide actual command for clean GSOS + Spectrum install, which is what gsport runs if no HD available
# √ provide command for clean GSOS install for KEGS
# √ add Dave's preflight/postflight stuff (groups, ownership permissions) for gsport
# √ install libpcap0.8-dev as part of Apple II Pi, GSport install, and GSport launcher
# √ make kegs-setup
# √ make kegs splash text
# √ doesn't add VirtualBox 800x600 if installing on Pi
# √ stop xrandr from being added multiple times to autostart in VirtualBox
# √ only install vbox 800x600 if running in VirtualBox
# √ disable screen blanking in vbox console
# √ disable screensaver in vbox LXDE
# √ disable screen blanking in vbox LXDE
# √ don't create LXTerminal desktop shortcut if RPi
# √ -6 arg provides empty ProDOS disks in S6D1 and S6D2 to GSport to speed things up
# √ -6 arg provides empty ProDOS disks in S6D1 and S6D2 to KEGS to speed things up
# √ can test if password is "raspberry" or "apple2" and advise accordingly
# √ enable Uthernet by default in gsport-setup
# √ enable AppleTalk Turbo by default in gsport-setup
Remove trailing whitespace from lines
2015-10-30 12:38:31 +00:00
# √ make kegs run as root
Copy the archive setup.txt to the source tree
2015-10-30 10:38:11 +00:00
# √ consolidate gsport-setup and kegs-setup
# √ gsport-setup is gsport, gsport-setup -k is kegs
# √ clean up KEGS/GSport installer sections to be consistent
# √ create kegs-setup placeholders that call gsport-setup -k
# √ gsport-setup only offer system disks/GSport if java/acmd are available
# √ suppress policykit error that appears after upgrade:
# √ http://www.raspberrypi.org/forums/viewtopic.php?t=98617
# √ see if uninstalling vbox additions is really necessary (nope)
# √ A2SERVER: creates symlink to /usr/local/etc/netatalk in /etc
# √ A2SERVER: -r no repo update option
# √ A2SERVER: can test if password is "raspberry" or "apple2" and advise accordingly
# √ A2SERVER: set AFP password to "apple2"
# √ A2SERVER: automated Windows Sharing install option -w
# √ A2SERVER: automate SMB password set
# √ A2SERVER: fix bug where turning off windows sharing then on again made it not restart at startup
# √ A2SERVER: turnkey (non-prompting) updater
# √ A2SERVER: show current and available versions on run
# √ A2SERVER: -v option to show version and exit
# √ A2SERVER: -h shows help
# √ A2SERVER: prefix status messages with A2SERVER:
# √ A2SERVER: fixed OS X connection problems by adding dhx2 uams files to rpi and x86 tarballs
# √ A2SERVER: set user password to "apple2"
# √ A2SERVER: support a2server-update rasppleii
# √ A2SERVER: automated netboot install option -b
# √ A2SERVER: deletes /tmp/a2server-packageReposUpdated at end
# √ A2SERVER: update help and aliases for raspbian-update
# √ A2SERVER: update a2server-setup rasppleii
# √ A2SERVER: add "a2server-update rasppleii"
# √ A2SERVER: disable screen blanking in Debian VM console
# √ A2SERVER: add raspbian-update and rasppleii-update
# NOOBS:
# √ get photo B slide into all NOOBS slides (even non-a version) and also upload to online
# √ make NOOBS default to US keyboard (recovery.cmdline append lang=en keyboard=us)
# √ make NOOBS-lite 1.4.0+ that can install Raspple II from net, use for upgrade
# √ (change URL and default OS in noobs-master/recovery/config.h
# √ change "raspple" option to 'os' or '-os'
# √ remove silentinstall in raspbian-update
# √ add 'disablesafemode' to recovery.cmdline in Raspple II and Raspple II Lite
# √ make raspbian-update NOOBS-aware, both for standard NOOBS and Raspple II
# 1.7.2 -- manually triggers udev rules during startup if ttyusbhandler script didn't execute (which it doesn't in Raspbian 31-Jan-2015/Kernel 3.18)
# doesn't provide Java space warning if java is already installed
# A/A+ support (vsdrive on direct attach or hub port 3, console on hub port 2)
# 1.7.1 -- full undoit (unblu/unexec/unbit/usq/sciibin)
# debian7_x86 and rpi binaries
# perl version for ttytter not hardcoded
# KEGS and LinApple support on debian_x86
# kegs launch script creates additional symlink called ROM
# linapple launch script sets up framebuffer and udev mouse rule
# apt-get clean after all installs
# installer option to compile all rather than download binaries
# login message mentions A2SERVER if it is installed
# LXDE terminal window now in global autostart (opens for any user)
# LXDE desktop defaults to 800x600 if running in VirtualBox VM
# 1.7.0 -- Java 8
# 1.6.9 -- ADTPro 2.0.0
# new A2CLOUD disks with A2PI client 1.8
# 1.6.8 -- ADTPro 1.3.0
# tests for adtpro existence with either adtpro.sh or ADTPro.html
# installs ttytter from its home page, not via apt-get (because it's in non-free, which is not enabled by default in debian)
# 1.6.7 -- cppo installed from a2cloud directory on web server (a2server has symlink)
# fixed cppo -e bug that always created a resource fork file even if there is no resource fork
# shk2image leaves nothing behind in /tmp
# wildcard copy all files on A2PI disk except PRODOS/BASIC.SYSTEM/*A3* to A2CLOUD disks when building
# @ √ new A2CLOUD disks with A2PI client 1.4
# % update before install for a2chat/a2news/kegs/kegs-setup/linapple/gsport/gsport-setup
# disables IPv6 for exim4 to properly prevent startup error messages; restores log folder if not there
# ^@ A2CLOUD.HDV is now A2CLOUD.PO (with symlink to A2CLOUD.HDV)
# √ renamed MACRO files on server to be .txt and moved to files
# ^@ √ new startup app on disk to make it easier to get to A2PI
# a2cloud-setup updates a2news/a2chat/kegs/kegs-setup/linapple wrappers
# added screen to a2cloud-help
# 1.6.6 -- installs Screen
# installs curl if not installed (for ttytter)
# ttytter alias works correctly if run under Screen
# a2cloudrc is now downloaded rather than created by script
# LANG is now set in /usr/local/etc/a2cloud-lang rather than in a2cloudrc
# fixed bug which checked for nulib2 instead of unar when seeing if needing to compile
# opens terminal window in lxde on startup
# setup -v displays available and installed versions
# setup -y now bypasses all prompts; -n removed
# % setup exits properly whether run via source or shell
# moved cftp to files
# support for x86 Debian/Ubuntu:
# compiles binaries rather than downloads if not running on Pi
# gets and supports Oracle x86 Java if not on Pi
# installs X11 and LXDE if not installed
# ttyUSBupper is always ttyUSB0, ttyUSBlower is always ttyUSB1
# adtpro.sh supports USB-to-serial on all architectures
# 1.6.5 -- term command accepts mono/color/none as synonyms for vt100/pcansi/dumb
# minor reorganization of configuration of a2cloudrc and screenrc
# 1.6.4 -- term command has -f argument to force action
# bash.bashrc now calls /usr/local/etc/a2cloudrc, which calls a2cloud-aliases
# support for screen command (preserves TERM environment variable in new screen)
# 1.6.3 -- sets ttytter to use ssl, and also 7-bit on serial port login, and ansi
# if using TERM=pcansi. Also provides Term::ReadLine::TTYtter for -readline option
# revised command line options and prompt for installing all or selective
# added appleiipi-update command
# 1.6.2 -- installs ISO-8859 (8-bit) character set for serial port login
# adds 'term' command for setting vt100 or ANSI emulation
# apt-get clean at end of A2CLOUD install
# installs sciibin and unblu
# a2cloud-update alias to a2cloud-setup
# 300 baud support by 'baud'
# prevents gsport (A2PI) from running when invoked from serial port
# cmd line option and prompt to install either all, or select individual
# revised intro language
# 1.6.1 -- installs telnet and ttytter
# prevents exim4 error messages after Tin installation
# 1.6.0 -- checks for ADTPro update
# updates ADTPro server and client software
# put adtpro version number into variable and removed hardcoding elsewhere
# asks for prodos volume name for new disk image; 8192 max
# fixed order of files on 140K disk to be consistent with 800K disk
# adtpro-start start now checks for USB adapter before starting
# restarts ADTPro server on vsd1/vsd2 after prompting
# created vsdsync alias to adtpro-restart; acmd warns if neeed
# acmd warns if vsd1/vsd2 changes, and advises vsdsync if so
# acmd now provides acmd help even on AppleCommander error
# 1.6.0 beta
#(unreleased)
# 1.5.3 -- gets motd from web
# prevents /var/log/exim4/paniclog from filling up
# sets password to apple2
# shares /usr/local/adtpro/disks to AFP & SMB
# don't prompt for restart after install by default
# avahi-daemon installed
# backup server for shrinkit
# 1.5.2 -- cleans up at end, downloads disks, full A2PI including extras,
# bug fixes, -h for options
# 1.5.1 -- added dos2pro
# 1.5 -- provides a2chat, a2news, kegs, linapple, a2pi
# 1.23 -- support for new A2PI client
# 1.22 -- downloads base gnustep library for unar/lsar, not full dev packages;
# will still download those and build if binary isn't available for some reason
# same goes for nulib2 and cftp. Should make for speedier install.
# adds A2PI client software to A2CLOUD disk
# disables console getty
# installs xrdp
# adds DSK2FILE to A2CLOUD disk
# 1.7.2 -- manually triggers udev rules during startup if ttyusbhandler script didn't execute (which it doesn't in Raspbian 31-Jan-2015/Kernel 3.18)
# doesn't provide Java space warning if java is already installed
# A/A+ support (vsdrive on direct attach or hub port 3, console on hub port 2)
# 1.7.1 -- full undoit (unblu/unexec/unbit/usq/sciibin)
# debian7_x86 and rpi binaries
# perl version for ttytter not hardcoded
# KEGS and LinApple support on debian_x86
# kegs launch script creates additional symlink called ROM
# linapple launch script sets up framebuffer and udev mouse rule
# apt-get clean after all installs
# installer option to compile all rather than download binaries
# login message mentions A2SERVER if it is installed
# LXDE terminal window now in global autostart (opens for any user)
# LXDE desktop defaults to 800x600 if running in VirtualBox VM
# 1.7.0 -- Java 8
# 1.6.9 -- ADTPro 2.0.0
# new A2CLOUD disks with A2PI client 1.8
# 1.6.8 -- ADTPro 1.3.0
# tests for adtpro existence with either adtpro.sh or ADTPro.html
# installs ttytter from its home page, not via apt-get (because it's in non-free, which is not enabled by default in debian)
# 1.6.7 -- cppo installed from a2cloud directory on web server (a2server has symlink)
# fixed cppo -e bug that always created a resource fork file even if there is no resource fork
# shk2image leaves nothing behind in /tmp
# wildcard copy all files on A2PI disk except PRODOS/BASIC.SYSTEM/*A3* to A2CLOUD disks when building
# @ √ new A2CLOUD disks with A2PI client 1.4
# % update before install for a2chat/a2news/kegs/kegs-setup/linapple/gsport/gsport-setup
# disables IPv6 for exim4 to properly prevent startup error messages; restores log folder if not there
# ^@ A2CLOUD.HDV is now A2CLOUD.PO (with symlink to A2CLOUD.HDV)
# √ renamed MACRO files on server to be .txt and moved to files
# ^@ √ new startup app on disk to make it easier to get to A2PI
# a2cloud-setup updates a2news/a2chat/kegs/kegs-setup/linapple wrappers
# added screen to a2cloud-help
# 1.6.6 -- installs Screen
# installs curl if not installed (for ttytter)
# ttytter alias works correctly if run under Screen
# a2cloudrc is now downloaded rather than created by script
# LANG is now set in /usr/local/etc/a2cloud-lang rather than in a2cloudrc
# fixed bug which checked for nulib2 instead of unar when seeing if needing to compile
# opens terminal window in lxde on startup
# setup -v displays available and installed versions
# setup -y now bypasses all prompts; -n removed
# % setup exits properly whether run via source or shell
# moved cftp to files
# support for x86 Debian/Ubuntu:
# compiles binaries rather than downloads if not running on Pi
# gets and supports Oracle x86 Java if not on Pi
# installs X11 and LXDE if not installed
# ttyUSBupper is always ttyUSB0, ttyUSBlower is always ttyUSB1
# adtpro.sh supports USB-to-serial on all architectures
# 1.6.5 -- term command accepts mono/color/none as synonyms for vt100/pcansi/dumb
# minor reorganization of configuration of a2cloudrc and screenrc
# 1.6.4 -- term command has -f argument to force action
# bash.bashrc now calls /usr/local/etc/a2cloudrc, which calls a2cloud-aliases
# support for screen command (preserves TERM environment variable in new screen)
# 1.6.3 -- sets ttytter to use ssl, and also 7-bit on serial port login, and ansi
# if using TERM=pcansi. Also provides Term::ReadLine::TTYtter for -readline option
# revised command line options and prompt for installing all or selective
# added appleiipi-update command
# 1.6.2 -- installs ISO-8859 (8-bit) character set for serial port login
# adds 'term' command for setting vt100 or ANSI emulation
# apt-get clean at end of A2CLOUD install
# installs sciibin and unblu
# a2cloud-update alias to a2cloud-setup
# 300 baud support by 'baud'
# prevents gsport (A2PI) from running when invoked from serial port
# cmd line option and prompt to install either all, or select individual
# revised intro language
# 1.6.1 -- installs telnet and ttytter
# prevents exim4 error messages after Tin installation
# 1.6.0 -- checks for ADTPro update
# updates ADTPro server and client software
# put adtpro version number into variable and removed hardcoding elsewhere
# asks for prodos volume name for new disk image; 8192 max
# fixed order of files on 140K disk to be consistent with 800K disk
# adtpro-start start now checks for USB adapter before starting
# restarts ADTPro server on vsd1/vsd2 after prompting
# created vsdsync alias to adtpro-restart; acmd warns if neeed
# acmd warns if vsd1/vsd2 changes, and advises vsdsync if so
# acmd now provides acmd help even on AppleCommander error
# 1.6.0 beta
#(unreleased)
# 1.5.3 -- gets motd from web
# prevents /var/log/exim4/paniclog from filling up
# sets password to apple2
# shares /usr/local/adtpro/disks to AFP & SMB
# don't prompt for restart after install by default
# avahi-daemon installed
# backup server for shrinkit
# 1.5.2 -- cleans up at end, downloads disks, full A2PI including extras,
# bug fixes, -h for options
# 1.5.1 -- added dos2pro
# 1.5 -- provides a2chat, a2news, kegs, linapple, a2pi
# 1.23 -- support for new A2PI client
# 1.22 -- downloads base gnustep library for unar/lsar, not full dev packages;
# will still download those and build if binary isn't available for some reason
# same goes for nulib2 and cftp. Should make for speedier install.
# adds A2PI client software to A2CLOUD disk
# disables console getty
# installs xrdp
# adds DSK2FILE to A2CLOUD disk
Reference in New Issue Copy Permalink