Apple-2-Tools/a2cloud
1
0
Fork 0
mirror of https://github.com/RasppleII/a2cloud.git synced 2024-12-25 17:29:29 +00:00
Code Issues Projects Releases Wiki Activity
9b23c44b00
a2cloud/docs/ivanx/setup/v1.8.2.txt

1984 lines
94 KiB
Plaintext
Raw Normal View History

setup.txt is a symlink in Ivan's tree
2015-10-28 22:53:10 +00:00
#!/bin/bash
version="182"
adtProVersion="2.0.1"
## ID-bashbyter routines
binToDec () {
# converts single-byte binary string (8 bits) value to decimal
# warning: no error checking
# arg: binary string up to 8 bits
# out: decimal value
dec=0
bits=$1
while (( ${#bits} < 8 )); do
bits="0$bits"
done
for n in {0..7}; do
(( dec+=( ${bits:$n:1} * ( 2**(7-$n) ) ) ))
done
echo -n $dec
}
writecharDec () {
# write corresponding character of single-byte decimal value into file
# arg1: filename
# arg2: offset (# of bytes to skip before writing)
# arg3: decimal number from 0-255
# exit: 8=extraneous arg, 11=missing arg1, 12=missing arg2,
# 13=missing arg3, 22=invalid arg2, 23=invalid arg3
# out: nothing
[[ $1 ]] || return 11; [[ $2 ]] || return 12; [[ $3 ]] || return 13
[[ $4 ]] && return 8
[[ ( $(printf %d "$2" 2> /dev/null) == $2 ) \
&& ( $2 -ge 0 ) ]] || return 22
[[ ( $(printf %d "$3" 2> /dev/null) == $3 ) \
&& ( $3 -ge 0 ) && ( $3 -lt 255 ) ]] || return 23
# args are valid
echo -n -e "\x$(printf %02X "$3")" | \
dd of="$1" bs=1 seek=$(($2)) conv=notrunc 2> /dev/null
}
writecharsHex () {
# write corresponding characters of hex values into file
# arg1: filename
# arg2: offset (# of bytes to skip before writing)
# arg3: string of two-digit hexadecimal numbers from 00-FF, period delimited (not checked!)
# out: nothing
# exit: 8=extraneous arg, 11=missing arg1, 12=missing arg2,
# 13=missing arg3, 22=invalid arg2, 23=invalid arg3
[[ $1 ]] || return 11; [[ $2 ]] || return 12; [[ $3 ]] || return 13
[[ $4 ]] && return 8
[[ ( $(printf %d "$2" 2> /dev/null) == $2 ) \
&& ( $2 -ge 0 ) ]] || return 22
p=0
offset=$2
len=${#3}
while (( p < len )); do
outByte=${3:$p:2}
[[ $(printf %02X "0x$outByte" 2> /dev/null) == \
$(echo -n "$outByte" | tr [a-z] [A-Z]) ]] || return 23
# args are valid
echo -n -e "\x$outByte" | \
dd of="$1" bs=1 seek=$offset conv=notrunc 2> /dev/null
(( p += 3 ))
(( offset++ ))
done
}
# A2CLOUD installer start
isRpi=
[[ -f /usr/bin/raspi-config ]] && isRpi=1
[[ $isRpi ]] && { me="Pi"; fullme="Raspberry Pi"; } || { me="computer"; fullme="computer"; }
isDebian=
[[ ( -f /etc/debian_version ) && ( $(cut -c 1-2 < /etc/debian_version) == "7." ) && ( $(uname -m) == "i686" ) ]] && isDebian=1
if [[ -f /usr/local/etc/A2CLOUD-version ]]; then
echo "A2CLOUD version available: $version"
echo "A2CLOUD version installed: $(cat /usr/local/etc/A2CLOUD-version)"
fi
args="$@"
buildA2CloudDisk=
downloadBinaries=1
noA2PiExtras=
skipRepoUpdate=
restartPrompt=
autoAnswerYes=
updateRasppleII=
slot6=
noSetGroups=
while [[ $1 ]]; do
if [[ $1 == "-b" ]]; then
shift
buildA2CloudDisk=1
elif [[ $1 == "-c" ]]; then
shift
downloadBinaries=
elif [[ $1 == "-p" ]]; then
shift
noA2PiExtras=1
elif [[ $1 == "-r" ]]; then
shift
skipRepoUpdate="-r"
elif [[ $1 == "-s" ]]; then
shift
restartPrompt=1
elif [[ $1 == "-y" ]]; then
shift
autoAnswerYes="-y"
elif [[ $1 == "-6" ]]; then
shift
slot6=1
elif [[ $1 == "-os" || $1 == "os" ]]; then
# elif [[ ${1,,} == "rasppleii" || ${1,,} == "raspple" || ${1,,} == "rasappleii" || ${1,,} == "rasapple" || ${1,,} == "raspple2" || ${1,,} == "rasapple2" || ${1,,} == "-rasppleii" || ${1,,} == "-raspple" || ${1,,} == "-rasappleii" || ${1,,} == "-rasapple" || ${1,,} == "-raspple2" || ${1,,} == "-rasapple2" ]]; then
shift
updateRasppleII=1
elif [[ $1 == "-v" ]]; then
shift
if [[ ! -f /usr/local/etc/A2CLOUD-version ]]; then
echo "A2CLOUD version available: $version"
echo "A2CLOUD version installed: none"
fi
[[ $0 == "-bash" ]] && return 1 || exit 1
elif [[ $1 == "noSetGroups" ]]; then
shift
noSetGroups=1
elif [[ $1 ]]; then
echo "options:"
echo "-v: display installed and available versions, then exit"
echo "-y: auto-answer yes to all prompts"
echo "-r: don't update package lists"
echo "-s: prompt for restart after installation"
echo "-6: put blank 140K disk images in GSport and KEGS slot 6"
echo "-b: build A2CLOUD disks, rather than downloading premade images"
echo "-c: compile non-package items, rather than downloading binaries"
if [[ $isRpi ]]; then
echo "-p: don't install Apple II Pi extras"
echo "-os: update Raspbian OS, A2CLOUD, A2SERVER, and Apple II Pi"
fi
[[ $0 == "-bash" ]] && return 1 || exit 1
fi
done
if [[ $updateRasppleII ]]; then
echo "A2CLOUD: Updating Raspple II (takes up to an hour)..."
wget -qO /tmp/raspbian-update ivanx.com/a2cloud/setup/raspbian-update.txt
source /tmp/raspbian-update a2cloud a2server $autoAnswerYes $skipRepoUpdate
[[ $0 == "-bash" ]] && return 0 || exit 0
fi
echo
echo "Your $fullme will be set up for A2CLOUD, providing you"
echo " with mass storage and online access for your Apple II!"
echo
echo "Answer yes to all prompts if you want to be able to do all the"
echo " stuff mentioned on the A2CLOUD web site."
echo
echo "If you already have A2CLOUD installed, you will be updated to the"
echo " latest version. Check out http://ivanx.com/a2cloud for details."
echo
echo "Full installation may take an hour or longer. Updates are usually"
echo " much quicker. Type 'a2cloud-setup -h' for installation options."
echo
echo "Some actions will be performed as the root user."
if [[ ! $autoAnswerYes ]]; then
echo
echo -n "Continue? "
read
if [[ ${REPLY:0:1} != "Y" && ${REPLY:0:1} != "y" ]]; then
[[ $0 == "-bash" ]] && return 2 || exit 2
fi
fi
echo
installAllFeatures=
if [[ ! $autoAnswerYes ]]; then
echo
echo -n "Do you want to install all A2CLOUD features? "
read
fi
[[ $autoAnswerYes || ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installAllFeatures=1
if [[ $installAllFeatures ]]; then
installADTPro=1
createBootDisk=1
setupSerialPortLogin=1
installCommTools=1
installArchiveTools=1
installEmulators=1
[[ $isRpi ]] && installA2Pi=1 || installA2Pi=
else
installADTPro=
echo
echo -n "Install ADTPro server, for virtual drives and floppy disk transfers"
if [[ ! -f /usr/bin/X ]]; then
echo
echo -n "(the X Window System and LXDE desktop environment will be installed)"
fi
echo -n "? "
read
[[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installADTPro=1
createBootDisk=
installArchiveTools=
newImageName=
imageSize=
if [[ $installADTPro ]]; then
echo
echo -n "Do you want to create A2CLOUD 140K and 800K boot disk images? "
read
if [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]]; then
createBootDisk=1
installArchiveTools=1
fi
if [[ ! -f /usr/local/adtpro/disks/Virtual.po || ( -f /usr/local/adtpro/adtpro.sh && -f /usr/local/adtpro/disks/Virtual.po && $(sha1sum /usr/local/adtpro/disks/Virtual.po | cut -f 1 -d ' ') == "a209a8b3a485c95c57bc691a8a58867a6c0ec628" ) ]]; then
while (( 1 )); do
echo
echo "The default blank disk in S2,D1 will be 800K. If you want a different size,"
echo -n " enter it in K (larger is slower when writing; max 8192): "
read
if (( ${REPLY}0 >= 1400 )); then
imageSize=$REPLY
echo -n "Enter new image file name: "
read
if [[ $REPLY ]]; then
reply="$REPLY"
[[ $(tr [:lower:] [:upper:] <<< ${reply:(-3)}) != ".PO" ]] && reply="$REPLY.PO"
if [[ ! -f /usr/local/adtpro/disks/"$reply" ]]; then
newImageName="$reply"
prodosVolName='0'
# test ProDOS name legality
while [[ ${#prodosVolName} -gt 15 || ! $(grep ^[A-Z][0-9A-Z\.]*$ <<< $prodosVolName) ]]; do
echo -n "Enter new image ProDOS volume name (or return for 'UNTITLED'): "
read
[[ $REPLY ]] && prodosVolName="$REPLY" || prodosVolName="UNTITLED"
prodosVolName=$(tr [:lower:] [:upper:] <<< $prodosVolName)
done
break
else
echo "A2CLOUD: Disk image already exists. Not creating."
fi
fi
else
break
fi
done
fi
fi
setupSerialPortLogin=
echo
echo -n "Do you want to set up your $me for serial port login? "
read
[[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && setupSerialPortLogin=1
installCommTools=
echo
echo -n "Install internet access and file transfer tools on your $me? "
read
[[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installCommTools=1
if [[ ! $installArchiveTools ]]; then
echo
echo -n "Install utilities for Apple II archives and disk images? "
read
[[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installArchiveTools=1
fi
installEmulators=
echo
echo -n "Install Apple IIgs and IIe emulators? "
read
[[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installEmulators=1
installA2Pi=
if [[ $isRpi ]]; then
echo
echo -n "Install Apple II Pi? "
read
[[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]] && installA2Pi=1
fi
fi
echo
userPw=$(sudo grep "^$USER" /etc/shadow | cut -f 2 -d ':')
[[ $userPw == "$(echo 'apple2' | perl -e '$_ = <STDIN>; chomp; print crypt($_, $ARGV[0])' "${userPw%"${userPw#\$*\$*\$}"}")" ]] && isApple2Pw=1 || isApple2Pw=
[[ $userPw == "$(echo 'raspberry' | perl -e '$_ = <STDIN>; chomp; print crypt($_, $ARGV[0])' "${userPw%"${userPw#\$*\$*\$}"}")" ]] && isRaspberryPw=1 || isRaspberryPw=
if [[ ! $isApple2Pw && ! -f /usr/local/etc/A2CLOUD-version ]]; then
if [[ ! $autoAnswerYes ]]; then
echo "To make A2CLOUD work smoothly, you are recommended"
echo "to change your password to 'apple2'."
echo
echo -n "Do you want to change the password for user '$USER' to 'apple2' now? "
read
fi
if [[ $autoAnswerYes || ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]]; then
echo "A2CLOUD: changing password for user '$USER' to 'apple2'..."
echo "$USER:apple2" | sudo chpasswd
isApple2Pw=1
fi
fi
thePassword="your password"
[[ $isApple2Pw ]] && thePassword="'apple2'"
[[ $isRaspberryPw ]] && thePassword="'raspberry'"
echo
echo "During this installation, enter ${thePassword}"
echo "if prompted for passwords."
echo
if [[ ! $autoAnswerYes ]]; then
echo -n "Press return to continue..."
read
fi
origDir="$PWD"
rm -rf /tmp/a2cloud-install &> /dev/null
mkdir -p /tmp/a2cloud-install
cd /tmp/a2cloud-install
echo
if [[ ! $skipRepoUpdate ]]; then
echo "A2CLOUD: Updating package lists..."
sudo apt-get -y update > /dev/null
else
echo "A2CLOUD: Not updating package lists..."
fi
# general commands and configuration
echo "A2CLOUD: Adding udev trigger to /etc/rc.local..."
#grep udevadm /etc/rc.local > /dev/null || sudo sed -i 's/^exit 0$/[ -e \/dev\/ttyUSBupper ] \&\& $(ps aux | grep "sleep 86399" > \/dev\/null) \&\& udevadm trigger --action=change\n[ -e \/dev\/ttyUSBlower ] \&\& ! $(ps aux | grep [a]dtpro > \/dev\/null) \&\& udevadm trigger --action=change\n\nexit 0/' /etc/rc.local
grep udevadm /etc/rc.local > /dev/null || sudo sed -i 's/^exit 0$/[ -e \/dev\/ttyUSBupper ] \&\& ! [ -f \/tmp\/udev-ttyUSBupper-added ] \&\& udevadm trigger --action=change\n[ -e \/dev\/ttyUSBlower ] \&\& ! [ -f \/tmp\/udev-ttyUSBlower-added ] \&\& udevadm trigger --action=change\n\nexit 0/' /etc/rc.local
echo "A2CLOUD: Setting up dopo command..."
sudo wget -qO /usr/local/bin/dopo ivanx.com/a2cloud/setup/dopo.txt
sudo chmod ugo+x /usr/local/bin/dopo
echo "A2CLOUD: Setting up cppo command..."
sudo wget -qO /usr/local/bin/cppo ivanx.com/a2cloud/setup/cppo.txt
sudo chmod ugo+x /usr/local/bin/cppo
echo "A2CLOUD: Setting up a2cloud-help..."
sudo wget -qO /usr/local/etc/a2cloud-help.txt ivanx.com/a2cloud/setup/a2cloud-help.txt
if [[ $isRpi ]]; then
sudo sed -i 's/^gsport.*$/gsport : GSport Apple IIgs emulator (or log in with user "apple2user")/' /usr/local/etc/a2cloud-help.txt
fi
echo "A2CLOUD: Setting up motd..."
if [[ $(grep Raspple /etc/motd) ]]; then
wget -qO- ivanx.com/rasppleii/motd-rasppleii.txt | sudo tee /etc/motd > /dev/null
elif [[ $(grep A2SERVER /etc/motd) ]]; then
wget -qO- ivanx.com/rasppleii/motd-vm.txt | sudo tee /etc/motd > /dev/null
else
wget -qO- ivanx.com/a2cloud/setup/motd.txt | sudo tee /etc/motd > /dev/null
fi
if { lspci 2> /dev/null | grep -q VirtualBox; }; then
echo "A2CLOUD: Disabling VirtualBox console screen blanking..."
sudo sed -i 's/^BLANK_DPMS=off/BLANK_DPMS=on/' /etc/kbd/config
sudo sed -i 's/^BLANK_TIME=[^0].$/BLANK_TIME=0/' /etc/kbd/config
sudo /etc/init.d/kbd restart &> /dev/null
sudo /etc/init.d/console-setup restart &> /dev/null
fi
echo "A2CLOUD: Setting up control commands and environment variables..."
sudo wget -qO /usr/local/etc/a2cloud-aliases ivanx.com/a2cloud/setup/a2cloud-aliases.txt
echo "A2CLOUD: Setting up login script..."
sudo sed -i "s/a2cloud-aliases/a2cloudrc/" /etc/bash.bashrc
sudo sed -i '/ttyUSB/d' /etc/bash.bashrc
[[ ! $(grep a2cloudrc /etc/bash.bashrc) ]] && echo "source /usr/local/etc/a2cloudrc" | sudo tee -a /etc/bash.bashrc > /dev/null
sudo wget -qO /usr/local/etc/a2cloudrc ivanx.com/a2cloud/setup/a2cloudrc.txt
source /usr/local/etc/a2cloudrc
echo "A2CLOUD: Saving installer version..."
echo "$version" | sudo tee /usr/local/etc/A2CLOUD-version &> /dev/null
if [[ ! $(dpkg -l avahi-daemon 2> /dev/null | grep ^ii) || ! $(dpkg -l libnss-mdns 2> /dev/null | grep ^ii) ]]; then
echo "A2CLOUD: Installing avahi-daemon (mDNS)..."
sudo apt-get -y install avahi-daemon &> /dev/null
sudo apt-get -y clean
sudo sed -i 's/^\(hosts.*\)$/\1 mdns/' /etc/nsswitch.conf
else
echo "A2CLOUD: avahi-daemon (mDNS) is already installed."
fi
if [[ $installADTPro ]]; then
freeSpace=$(df / | tail -1 | awk '{ print $4 }')
java -version &> /dev/null
if (( $? == 127 && $freeSpace < 350000 )); then
echo "You do not have enough free space to install"
echo "Java, which is needed for ADTPro server."
if [[ $isRpi ]]; then
echo "If you haven't"
echo "yet expanded the file system to use the full capacity"
echo "of your SD card, type \"sudo raspi-config\" and do that."
else
echo "Free up some space."
fi
echo "Then try this installer again."
echo
[[ $0 == "-bash" ]] && return 3 || exit 3
fi
if [[ ! -f /usr/bin/X ]]; then
echo "A2CLOUD: Installing X Window System and LXDE..."
sudo apt-get -y install xorg lxde
sudo apt-get -y clean
# prevent automatically running at startup
sudo sed -i 's/^GRUB_CMDLINE_LINUX_DEFAULT=.*$/GRUB_CMDLINE_LINUX_DEFAULT="text"/' /etc/default/grub
sudo update-grub
else
echo "A2CLOUD: X Window System and LXDE are already installed."
fi
# if [[ ! -f /etc/xdg/autostart/lxterminal.desktop ]]; then
# echo "A2CLOUD: Setting terminal window to auto-open on desktop..."
# echo -e "\n[Desktop Entry]\nType=Application\nExec=/usr/bin/lxterminal" | sudo tee /etc/xdg/autostart/lxterminal.desktop > /dev/null
# else
# echo "A2CLOUD: Terminal window already set to auto-open on desktop."
# fi
if { lspci 2> /dev/null | grep -q VirtualBox; }; then
if { ! grep -q default /etc/xdg/lxsession/LXDE/autostart; }; then
echo "A2CLOUD: Setting desktop to 800x600 in VirtualBox console (no Additions)..."
echo -e "\nxrandr --output default --mode 800x600" | sudo tee -a /etc/xdg/lxsession/LXDE/autostart > /dev/null
else
echo "A2CLOUD: Desktop already set to 800x600 in VirtualBox console (no Additions)."
fi
if { ! grep -q VBOX0 /etc/xdg/lxsession/LXDE/autostart; }; then
echo "A2CLOUD: Setting desktop to 800x600 in VirtualBox console (with Additions)..."
echo -e "\nxrandr --output VBOX0 --mode 800x600" | sudo tee -a /etc/xdg/lxsession/LXDE/autostart > /dev/null
else
echo "A2CLOUD: Desktop already set to 800x600 in VirtualBox console (with Additions)."
fi
echo "A2CLOUD: Disabling screensaver and screen blanking in VirtualBox LXDE..."
sudo sed -i 's/^\(@xscreensaver.*\)$/#\1\n\nxset s noblank\nxset s off\nxset -dpms\n/' /etc/xdg/lxsession/LXDE/autostart
fi
if [[ $isRpi ]]; then
sudo sed -i 's/^.*VBOX0.*$//' /etc/xdg/lxsession/LXDE/autostart 2> /dev/null
sudo sed -i 's/^.*VBOX0.*$//' /etc/xdg/lxsession/LXDE-pi/autostart 2> /dev/null
fi
# install or update java
javaVersion=$(java -version 2>&1)
if [[ ( $? -eq 127 ) || ( $(head -1 <<< "$javaVersion" | cut -f 2 -d '.') -lt 8 ) ]]; then
echo "A2CLOUD: Installing Java (takes a while)..."
if [[ $isRpi ]]; then
if [[ $(apt-cache search '^oracle-java8-jdk$') ]]; then
sudo apt-get -y install oracle-java8-jdk
else
sudo apt-get -y install oracle-java7-jdk
fi
sudo apt-get -y clean
else
# from http://www.webupd8.org/2012/06/how-to-install-oracle-java-7-in-debian.html
if { ! grep -q webupd8team /etc/apt/sources.list; }; then
{
echo;
echo "# Oracle Java JDK";
echo "deb http://ppa.launchpad.net/webupd8team/java/ubuntu precise main";
echo "deb-src http://ppa.launchpad.net/webupd8team/java/ubuntu precise main";
} | sudo tee -a /etc/apt/sources.list > /dev/null
fi
sudo apt-key adv --keyserver hkp://keyserver.ubuntu.com:80 --recv-keys EEA14886
sudo apt-get -y update
echo debconf shared/accepted-oracle-license-v1-1 select true | sudo debconf-set-selections
sudo apt-get -y install oracle-java8-installer
sudo apt-get -y clean
fi
source /usr/local/etc/a2cloudrc
else
echo "A2CLOUD: Java is already installed."
fi
updateADTPro=
# check if update needed
if [ -f /usr/local/adtpro/lib/ADTPro-* ]; then
if [[ $(ls -1 /usr/local/adtpro/lib/ADTPro-*.jar | cut -f 6 -d '/') != "ADTPro-$adtProVersion.jar" ]]; then
echo
echo "ADTPro server should be updated. If you have made any customizations"
echo " to any of the files in /usr/local/adtpro, other than the 'disks' folder,"
echo " they will be lost. If you don't know what this means, then you don't"
echo -n " need to worry. Update now? "
read
if [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]]; then
updateADTPro=1
echo "A2CLOUD: removing old version of ADTPro server..."
sudo pkill -f [A]DTPro
sudo rm /usr/local/adtpro/disks/ADTPRO*.DSK &> /dev/null
sudo rm /usr/local/adtpro/disks/ADTPRO*.PO &> /dev/null
sudo rm /usr/local/adtpro/disks/VDRIVE*.DSK &> /dev/null
sudo rm -r /tmp/a2cloud-install/disks &> /dev/null
sudo mv /usr/local/adtpro/disks /tmp/a2cloud-install
sudo rm -r /usr/local/adtpro/ac.bat \
/usr/local/adtpro/ac.sh \
/usr/local/adtpro/adtpro.bat \
/usr/local/adtpro/adtpro.cmd \
/usr/local/adtpro/ADTPro.html \
/usr/local/adtpro/adtpro.sh \
/usr/local/adtpro/lib \
/usr/local/adtpro/LICENSE \
/usr/local/adtpro/README \
&> /dev/null
fi
else
echo "A2CLOUD: ADTPro server does not need updating."
fi
fi
if [[ ! -f /usr/local/adtpro/adtpro.sh || ! -f /usr/local/adtpro/ADTPro.html ]]; then
echo "A2CLOUD: installing ADTPro server..."
sudo pkill -f [A]DTPro
wget -qO /tmp/a2cloud-install/adtpro.tar.gz downloads.sourceforge.net/project/adtpro/adtpro/ADTPro-$adtProVersion/ADTPro-$adtProVersion.tar.gz
sudo mkdir -p /usr/local/adtpro
sudo tar --strip-components=1 -C /usr/local/adtpro -zxf /tmp/a2cloud-install/adtpro.tar.gz
sudo chmod -R ugo+w /usr/local/adtpro
sudo ln -s /usr/local/adtpro/lib/ADTPro*jar /usr/local/adtpro/lib/ADTPro.jar
sudo ln -s /usr/local/adtpro/lib/AppleCommander/AppleCommander*ac.jar /usr/local/adtpro/lib/AppleCommander/AppleCommander-ac.jar
echo "sudo /usr/local/adtpro/adtpro.sh \$@" | sudo tee /usr/local/bin/adtpro.sh > /dev/null
sudo chmod ugo+x /usr/local/bin/adtpro.sh
sudo usermod -a -G uucp $USER
sudo usermod -a -G uucp root
else
echo "A2CLOUD: ADTPro server is already installed."
fi
if [[ ! -f /usr/local/adtpro/lib/AppleCommander/AppleCommander-1.3.5.13id-ac.jar ]]; then
echo "A2CLOUD: Installing AppleCommander-1.3.5.13id..."
sudo mkdir -p /usr/local/adtpro/lib/AppleCommander
wget -qO /usr/local/adtpro/lib/AppleCommander/AppleCommander-1.3.5.13id-ac.jar http://downloads.sourceforge.net/project/applecommander/AppleCommander%20-%20Interim/testcase/AppleCommander-1.3.5.13id-ac.jar
rm /usr/local/adtpro/lib/AppleCommander/AppleCommander-ac.jar &> /dev/null
ln -s AppleCommander-1.3.5.13id-ac.jar /usr/local/adtpro/lib/AppleCommander/AppleCommander-ac.jar
else
echo "A2CLOUD: AppleCommander-1.3.5.13id is already installed."
fi
echo "A2CLOUD: Setting up customized adtpro.sh..."
wget -qO /usr/local/adtpro/adtpro.sh ivanx.com/a2cloud/setup/adtpro.sh.txt
sudo chmod ugo+rwx /usr/local/adtpro/adtpro.sh
if [[ $updateADTPro ]]; then
echo "A2CLOUD: Replacing disks folder..."
sudo mv /tmp/a2cloud-install/disks/* /usr/local/adtpro/disks
sudo rmdir /tmp/a2cloud-install/disks
fi
if [[ ! -f /usr/lib/jni/librxtxSerial.so ]]; then
echo "A2CLOUD: Installing serial port libraries..."
sudo apt-get -y install librxtx-java
sudo apt-get -y clean
else
echo "A2CLOUD: Serial port libraries are already installed."
fi
[[ ! -f /usr/lib/RXTXcomm.jar ]] && sudo ln -s /usr/share/java/RXTXcomm.jar /usr/lib &> /dev/null
[[ ! -d /usr/local/adtpro/lib/rxtx/rxtx-2.2pre2-local/arm ]] && ln -s /usr/lib/jni /usr/local/adtpro/lib/rxtx/rxtx-2.2pre2-local/arm &> /dev/null
if [[ ! -f /usr/bin/xvfb-run ]]; then
echo "A2CLOUD: Installing xvfb for headless operation..."cd
sudo apt-get -y install xvfb
sudo apt-get -y clean
else
echo "A2CLOUD: xvfb is already installed."
fi
if [[ -f /usr/local/sbin/afpd ]]; then # A2SERVER/netatalk installed
if [[ ! -d /media/A2SHARED/ADTDISKS || ! $(grep ADTDISKS /usr/local/etc/netatalk/AppleVolumes.default) ]]; then
echo "A2CLOUD: Setting up /usr/local/adtpro/disks for Apple file sharing..."
if [[ ! -d /media/A2SHARED/ADTDISKS ]]; then
ln -s /usr/local/adtpro/disks /media/A2SHARED/ADTDISKS 2> /dev/null
fi
if [[ ! $(grep ADTDISKS /usr/local/etc/netatalk/AppleVolumes.default) ]]; then
sudo sed -i 's@^# End of File@/media/A2SHARED/ADTDISKS ADTDISKS ea:ad\n\n# End of File@' /usr/local/etc/netatalk/AppleVolumes.default
fi
sudo /etc/init.d/netatalk restart
else
echo "A2CLOUD: /usr/local/adtpro/disks is already set up for Apple file sharing."
fi
if { grep -q A2SHARED /etc/samba/smb.conf 2> /dev/null; }; then # SMB already enabled by A2SERVER
if { grep -q ADTDISKS /etc/samba/smb.conf 2>/dev/null; }; then
echo "A2CLOUD: /usr/local/adtpro/disks is already set up for Windows file sharing."
else
echo "A2CLOUD: Setting up /usr/local/adtpro/disks for Windows file sharing..."
echo "[ADTDISKS]" | sudo tee -a /etc/samba/smb.conf > /dev/null
echo " path = /media/A2SHARED/ADTDISKS" | sudo tee -a /etc/samba/smb.conf > /dev/null
echo " browsable = yes" | sudo tee -a /etc/samba/smb.conf > /dev/null
echo " guest ok = yes" | sudo tee -a /etc/samba/smb.conf > /dev/null
echo " read only = no" | sudo tee -a /etc/samba/smb.conf > /dev/null
echo " create mask = 0666" | sudo tee -a /etc/samba/smb.conf > /dev/null
echo " force user = $(whoami)" | sudo tee -a /etc/samba/smb.conf > /dev/null
fi
else
echo "A2CLOUD: Windows file sharing not in use."
fi
fi
echo "A2CLOUD: Setting up adtpro-start command..."
sudo wget -qO /usr/local/bin/adtpro-start ivanx.com/a2cloud/setup/adtpro-start.txt
sudo chmod ugo+x /usr/local/bin/adtpro-start
echo "A2CLOUD: Setting up vsd1/vsd2 commands..."
sudo wget -qO /usr/local/bin/vsd ivanx.com/a2cloud/setup/vsd.txt
sudo chmod ugo+x /usr/local/bin/vsd
echo "A2CLOUD: Setting up acmd command..."
sudo wget -qO /usr/local/bin/acmd ivanx.com/a2cloud/setup/acmd.txt
sudo chmod ugo+x /usr/local/bin/acmd
echo "A2CLOUD: Setting up mkpo command..."
sudo wget -qO /usr/local/bin/mkpo ivanx.com/a2cloud/setup/mkpo.txt
sudo chmod ugo+x /usr/local/bin/mkpo
echo "A2CLOUD: Setting up dos2pro command..."
sudo wget -qO /usr/local/bin/dos2pro ivanx.com/a2cloud/setup/dos2pro.txt
sudo chmod ugo+x /usr/local/bin/dos2pro
fi
if [[ -f /usr/bin/X ]]; then
if [[ ! -f /usr/sbin/xrdp ]]; then
echo "A2CLOUD: Installing xrdp/tightvncserver..."
sudo apt-get -y install xrdp
sudo apt-get -y clean
else
echo "A2CLOUD: xrdp/tightvncserver is already installed."
fi
else
echo "A2CLOUD: /usr/bin/X not found; not installing xrdp/tightvncserver."
fi
if [[ $setupSerialPortLogin ]]; then
echo "A2CLOUD: Setting GPIO serial login to 4800 bps, and disabling..."
# set console port login to 4800 bps (using RPi console cable) and comment it out
sudo sed -i 's/^\(T.*\)ttyAMA0 .* /#\1ttyAMA0 4800 /' /etc/inittab
sudo sed -i 's/ttyAMA0,[0-9]*/ttyAMA0,4800/g' /boot/cmdline.txt 2> /dev/null
if [[ ! -f /usr/bin/screen ]]; then
echo "A2CLOUD: Installing Screen for multiple terminals..."
sudo apt-get -y install screen
sudo apt-get -y clean
else
echo "A2CLOUD: Screen is already installed."
fi
echo "A2CLOUD: Disabling Screen welcome message..."
sudo sed -i 's/^#startup_message/startup_message/' /etc/screenrc
# use 8-bit (non-Unicode) character set for proper emulation in Apple II term programs
IFS='' defaultLang=$(grep ^LANG= /etc/default/locale | cut -f 2 -d '=')
langLatin1=${defaultLang%%.*}
if [[ ! $(grep "^$langLatin1.ISO" /usr/share/i18n/SUPPORTED) ]]; then
langLatin1="en_US"
fi
if [[ $(cat /usr/local/etc/a2cloud-lang 2> /dev/null) != $langLatin1 ]]; then
echo "A2CLOUD: Setting serial port login to use 8-bit character set..."
if [[ ! $(grep "^$langLatin1.ISO" /etc/locale.gen) ]]; then
echo "A2CLOUD: Generating locales..."
locs=$(IFS='' grep "^[^#]" /etc/locale.gen | while read -r thisLoc; do echo -n "$thisLoc, " ; done)
locISO=$(grep "$langLatin1.ISO" /usr/share/i18n/SUPPORTED | sort | head -1)
echo "locales locales/locales_to_be_generated multiselect $locs$locISO" | sudo debconf-set-selections
sudo rm /etc/locale.gen &> /dev/null
sudo dpkg-reconfigure -f noninteractive locales
else
echo "A2CLOUD: Locales have already been generated."
fi
# set LANG to ISO-8859 (8-bit) character set on TTY login
echo "${locISO%% *}" | sudo tee /usr/local/etc/a2cloud-lang > /dev/null
source /usr/local/etc/a2cloudrc
else
echo "A2CLOUD: Serial port login is already using 8-bit character set."
fi
echo "A2CLOUD: Setting up baud command..."
sudo wget -qO /usr/local/bin/baud ivanx.com/a2cloud/setup/baud.txt
sudo chmod ugo+x /usr/local/bin/baud
echo "A2CLOUD: Setting up term command..."
sudo wget -qO /usr/local/bin/term ivanx.com/a2cloud/setup/term.txt
sudo chmod ugo+x /usr/local/bin/term
echo "A2CLOUD: Setting up usbgetty command..."
sudo wget -qO /usr/local/sbin/usbgetty ivanx.com/a2cloud/setup/usbgetty.txt
sudo chmod ugo+x /usr/local/sbin/usbgetty
echo "A2CLOUD: Removing ttyUSB0 shell login..."
sudo sed -i "s/^\([^#].*ttyUSB0.*\)$//" /etc/inittab
if [[ ! $(grep -e '-scanttyUSB' /etc/inittab) ]]; then
echo "A2CLOUD: Adding USB port shell login at 4800 bps..."
echo -e "\n\n#for USB-to-serial adapter\nT1:23:respawn:/usr/local/sbin/usbgetty -h -L -scanttyUSB 4800 vt100" | sudo tee -a /etc/inittab > /dev/null
sudo init q
sudo pkill -f "[g]etty.*ttyUSB"
else
echo "A2CLOUD: USB port shell login already added."
fi
fi
echo "A2CLOUD: Setting up USB port serial adapter handler..."
sudo wget -qO /usr/local/sbin/ttyusbhandler ivanx.com/a2cloud/setup/ttyusbhandler.txt
sudo chmod ugo+x /usr/local/sbin/ttyusbhandler
if [[ ! -f /etc/udev/rules.d/50-usb.rules ]]; then
echo "A2CLOUD: Creating device rules for USB ports..."
udevLines=
if [[ $isRpi ]]; then
# assign ttyUSBupper, or ttyUSBupper_hubXX, for shell usb-to-serial adapter
# assign ttyUSBlower, or ttyUSBlower_hubXX, for ADTPro usb-to-serial adapter
# (A/A+ direct attach is always ttyUSBlower;
# hub attached to A/A+ will be ttyUSBupper on port 2, and ttyUSBlower on port 3)
udevLines+='KERNEL=="ttyUSB*", KERNELS=="1-1:1.0", SYMLINK+="ttyUSBlower", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBlower"\n'
udevLines+='ACTION=="remove", ENV{DEVPATH}=="*1-1:1.0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBlower"\n'
udevLines+='KERNEL=="ttyUSB*", KERNELS=="1-1.2:1.0", SYMLINK+="ttyUSBupper", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBupper"\n'
udevLines+='ACTION=="remove", ENV{DEVPATH}=="*1-1.2:1.0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBupper"\n'
udevLines+='KERNEL=="ttyUSB*", KERNELS=="1-1.3:1.0", SYMLINK+="ttyUSBlower", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBlower"\n'
udevLines+='ACTION=="remove", ENV{DEVPATH}=="*1-1.3:1.0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBlower"\n'
for i in {1..25}; do
ii=$(printf %02d $i)
udevLines+='KERNEL=="ttyUSB*", KERNELS=="1-1.2.'$i':1.0", SYMLINK+="ttyUSBupper_hub'$ii'", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBupper_hub'$ii'"\n'
udevLines+='ACTION=="remove", ENV{DEVPATH}=="*1-1.2.'$i':1.0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBupper_hub'$ii'"\n'
udevLines+='KERNEL=="ttyUSB*", KERNELS=="1-1.3.'$i':1.0", SYMLINK+="ttyUSBlower_hub'$ii'", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBlower_hub'$ii'"\n'
udevLines+='ACTION=="remove", ENV{DEVPATH}=="*1-1.3.'$i':1.0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBlower_hub'$ii'"\n'
done
else
# on non-Pi installations, assign ttyUSBupper to ttyUSB0 and ttyUSBlower to ttyUSB1
udevLines+='KERNEL=="ttyUSB0", SYMLINK+="ttyUSBupper", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBupper"\n'
udevLines+='ACTION=="remove", ENV{DEVPATH}=="*ttyUSB0*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBupper"\n'
udevLines+='KERNEL=="ttyUSB1", SYMLINK+="ttyUSBlower", RUN+="/usr/local/sbin/ttyusbhandler add ttyUSBlower"\n'
udevLines+='ACTION=="remove", ENV{DEVPATH}=="*ttyUSB1*", RUN+="/usr/local/sbin/ttyusbhandler remove ttyUSBlower"\n'
fi
echo -e "$udevLines" | sudo tee /etc/udev/rules.d/50-usb.rules > /dev/null
else
echo "A2CLOUD: Device rules for USB ports already exist."
fi
if [[ $installCommTools ]]; then
if [[ ! -f /usr/bin/curl ]]; then
echo "A2CLOUD: Installing curl..."
sudo apt-get -y install curl
sudo apt-get -y clean
else
echo "A2CLOUD: curl is already installed."
fi
if [[ ! -f /usr/bin/sz ]]; then
echo "A2CLOUD: Installing rzsz for X/Y/Zmodem transfers..."
sudo apt-get -y install lrzsz
sudo apt-get -y clean
else
echo "A2CLOUD: rzsz is already installed."
fi
if [[ ! -f /usr/bin/ftp ]]; then
echo "A2CLOUD: Installing ftp..."
sudo apt-get -y install ftp
sudo apt-get -y clean
else
echo "A2CLOUD: ftp is already installed."
fi
if [[ ! -f /usr/local/bin/cftp ]]; then
echo "A2CLOUD: Installing cftp..."
cd /tmp/a2cloud-install
if [[ $downloadBinaries ]]; then
if [[ $isRpi ]]; then
wget -qO- ivanx.com/a2cloud/files/cftp-rpi.tgz | sudo tar Pzx
elif [[ $isDebian ]]; then
wget -qO- ivanx.com/a2cloud/files/cftp-debian7_x86.tgz | sudo tar Pzx
fi
fi
if [[ ! -f /usr/local/bin/cftp ]]; then
sudo apt-get -y install build-essential
sudo apt-get -y install ncurses-dev
sudo apt-get -y clean
rm -rf /tmp/a2cloud-install/cftp* &> /dev/null
mkdir -p /tmp/a2cloud-install/cftp
cd /tmp/a2cloud-install/cftp
wget -q -O cftp.tgz http://nih.at/cftp/cftp-0.12.tar.gz
tar zxf cftp.tgz
cd cftp-0.12
./configure
make
sudo make install
cd /tmp/a2cloud-install
rm -rf cftp
fi
else
echo "A2CLOUD: cftp is already installed."
fi
if [[ ! -f /usr/bin/lynx ]]; then
echo "A2CLOUD: Installing lynx..."
sudo apt-get -y install lynx
sudo apt-get -y clean
else
echo "A2CLOUD: lynx is already installed."
fi
if [[ ! -f /usr/bin/links ]]; then
echo "A2CLOUD: Installing links..."
sudo apt-get -y --force-yes install links
sudo apt-get -y clean
else
echo "A2CLOUD: links is already installed."
fi
sudo wget -qO /usr/local/bin/a2news ivanx.com/a2cloud/setup/a2news.txt
sudo chmod ugo+x /usr/local/bin/a2news
if [[ ! -f /usr/bin/tin ]]; then
echo "A2CLOUD: Installing a2news/tin..."
sudo apt-get -y install tin
sudo apt-get -y clean
else
echo "A2CLOUD: a2news/tin is already installed."
fi
# have exim4 use IPv4 only to prevent log errors (IPv6 is off by default in Raspbian)
if [[ $(grep ' ; ::1' /etc/exim4/update-exim4.conf.conf) ]]; then
echo "A2CLOUD: Setting exim4 to use only IPv4 to prevent startup error messages..."
sudo sed -i 's/ ; ::1//' /etc/exim4/update-exim4.conf.conf
sudo update-exim4.conf
sudo rm /var/log/exim4/mainlog /var/log/exim4/paniclog &> /dev/null
fi
# restore exim4 log directory if occupied by a file put there by earlier A2CLOUD versions
if [[ -f /var/log/exim4 ]]; then
echo "A2CLOUD: Restoring exim4 log directory..."
sudo rm /var/log/exim4
sudo mkdir /var/log/exim4
sudo chown Debian-exim:adm /var/log/exim4
sudo chmod 2750 /var/log/exim4
fi
sudo wget -qO /usr/local/bin/a2chat ivanx.com/a2cloud/setup/a2chat.txt
sudo chmod ugo+x /usr/local/bin/a2chat
if [[ ! -f /usr/bin/irssi ]]; then
echo "A2CLOUD: Installing a2chat/irssi..."
sudo apt-get -y install irssi
sudo apt-get -y clean
else
echo "A2CLOUD: a2chat/irssi is already installed."
fi
if [[ ! -f /usr/bin/telnet ]]; then
echo "A2CLOUD: Installing telnet..."
sudo apt-get -y install telnet
sudo apt-get -y clean
else
echo "A2CLOUD: telnet is already installed."
fi
if [[ ( ! -f /usr/bin/ttytter && ! -f /usr/local/bin/ttytter ) || ! -f "/usr/local/share/perl/5.14.2/Term/ReadLine/TTYtter.pm" ]]; then
echo "A2CLOUD: Installing TTYtter..."
sudo wget -qO /usr/local/bin/ttytter http://www.floodgap.com/software/ttytter/dist2/2.1.00.txt
sudo chmod ugo+x /usr/local/bin/ttytter
perlVersion=$(perl -e 'print $^V' | cut -c 2-)
if [[ ! -f "/usr/local/share/perl/$perlVersion/Term/ReadLine/TTYtter.pm" ]]; then
echo "A2CLOUD: Installing TTYtter readline module..."
if [[ $downloadBinaries && $perlVersion == "5.14.2" ]]; then
if [[ $isRpi ]]; then
wget -qO- ivanx.com/a2cloud/files/ttytter_readline-rpi.tgz | sudo tar Pzx
elif [[ $isDebian ]]; then
wget -qO- ivanx.com/a2cloud/files/ttytter_readline-debian7_x86.tgz | sudo tar Pzx
fi
fi
if [[ ! -f "/usr/local/share/perl/$perlVersion/Term/ReadLine/TTYtter.pm" ]]; then
if [[ ! -f "/usr/local/lib/perl/$perlVersion/Term/ReadKey.pm" ]]; then
cd /tmp/a2cloud-install
wget -qO TermReadKey-2.31.tar.gz http://www.cpan.org/authors/id/J/JS/JSTOWE/TermReadKey-2.31.tar.gz
tar zxf TermReadKey-2.31.tar.gz
cd TermReadKey-2.31
perl Makefile.PL &> /dev/null
make &> /dev/null
sudo make install &> /dev/null
cd /tmp/a2cloud-install
rm -rf TermReadKey-2.31
fi
cd /tmp/a2cloud-install
wget -qO Term-ReadLine-TTYtter-1.4.tar.gz http://www.cpan.org/authors/id/C/CK/CKAISER/Term-ReadLine-TTYtter-1.4.tar.gz
tar zxf Term-ReadLine-TTYtter-1.4.tar.gz
cd Term-ReadLine-TTYtter-1.4
perl Makefile.PL &> /dev/null
make &> /dev/null
sudo make install &> /dev/null
cd /tmp/a2cloud-install
rm -rf Term-ReadLine-TTYtter-1.4
fi
else
echo "A2CLOUD: TTYtter readline module is already installed."
fi
else
echo "A2CLOUD: TTYtter is already installed."
fi
fi
if [[ $installA2Pi ]]; then
if [[ ! -f /sbin/a2pid ]]; then
echo "A2CLOUD: Installing Apple II Pi..."
cd /tmp/a2cloud-install
if ! grep 'schmenk.is-a-geek.com' /etc/apt/sources.list; then
echo "deb http://schmenk.is-a-geek.com/raspbian wheezy contrib" | sudo tee -a /etc/apt/sources.list > /dev/null
sudo apt-get -y update > /dev/null
fi
sudo apt-get -y --force-yes install a2pi
sudo apt-get -y clean
# wget -qO a2pi_armhf.deb schmenk.is-a-geek.com/tarfiles/a2pi_armhf.deb
# sudo dpkg -i a2pi_armhf.deb &> /dev/null
# rm a2pi_armhf.deb &> /dev/null
else
echo "A2CLOUD: Apple II Pi is already installed."
fi
if [[ ! $noA2PiExtras ]]; then
if [[ ! $(dpkg -l | grep libpcap0.8-dev) ]]; then
sudo apt-get -y install libpcap0.8-dev
sudo apt-get -y clean
fi
if [[ ! -f /usr/bin/gsport ]]; then
# echo "A2CLOUD: Updating package repositories to include Apple II Pi..."
# sudo apt-get -y update > /dev/null
echo "A2CLOUD: Installing Apple II Pi extras (GSport)..."
sudo apt-get -y --force-yes install apple2user
sudo apt-get -y clean
else
echo "A2CLOUD: Apple II Pi extras (GSport) are already installed."
fi
fi
sudo sed -i 's/( $SSH_CLIENT || $REMOTEHOST )/( $(tty | grep ttyUSB) || $(tty | grep ttyAMA) || $SSH_CLIENT || $REMOTEHOST )/' /usr/bin/gsport
if [[ $slot6 ]]; then
echo "A2CLOUD: Putting blank disks in GSport slot 6..."
sudo sed -i 's@^s6d1.*$@s6d1 = /usr/share/gsport/disks/slot6drive1.po@' /usr/share/gsport/config.txt
sudo sed -i 's@^s6d2.*$@s6d2 = /usr/share/gsport/disks/slot6drive2.po@' /usr/share/gsport/config.txt
sudo sed -i 's@^s6d1.*$@s6d1 = /usr/share/gsport/disks/slot6drive1.po@' /home/apple2/config.txt
sudo sed -i 's@^s6d2.*$@s6d2 = /usr/share/gsport/disks/slot6drive2.po@' /home/apple2/config.txt
if [[ ! -f /usr/share/gsport/disks/slot6drive1.po || ! -f /usr/share/gsport/disks/slot6drive2.po ]]; then
wget -qO- ivanx.com/a2cloud/files/slot6-gsport-rpi.tgz | sudo tar Pzx 2> /dev/null
fi
fi
# set AppleTalk to turbo
if ! grep -q 'g_appletalk_turbo' /usr/share/gsport/config.txt; then
if grep -q 'bram1[00]' /usr/share/gsport/config.txt; then
sudo sed -i 's/^\(bram1\[00\]\)/g_appletalk_turbo = 1\n\n\1/' /usr/share/gsport/config.txt
else
echo -e '\ng_appletalk_turbo = 1' | sudo tee -a /usr/share/gsport/config.txt > /dev/null
fi
fi
sudo sed -i 's/^g_appletalk_turbo = 0/g_appletalk_turbo = 1/' /usr/share/gsport/config.txt
# enable Uthernet
if ! grep -q 'g_ethernet[^_]' /usr/share/gsport/config.txt; then
if grep -q 'bram1[00]' /usr/share/gsport/config.txt; then
sudo sed -i 's/^\(bram1\[00\]\)/g_ethernet = 1\n\n\1/' /usr/share/gsport/config.txt
else
echo -e '\ng_ethernet = 1' | sudo tee -a /usr/share/gsport/config.txt > /dev/null
fi
fi
sudo sed -i 's/^g_ethernet = 0/g_ethernet = 1/' /usr/share/gsport/config.txt
fi
if [[ $installEmulators ]]; then
# KEGS
if [[ ! -f /usr/local/bin/xkegs ]]; then
echo "A2CLOUD: Installing KEGS..."
cd /tmp/a2cloud-install
if [[ $downloadBinaries ]]; then
if [[ $isRpi ]]; then
wget -qO- ivanx.com/a2cloud/files/kegs-rpi.tgz | sudo tar Pzx 2> /dev/null
elif [[ $isDebian ]]; then
wget -qO- ivanx.com/a2cloud/files/kegs-debian7_x86.tgz | sudo tar Pzx
fi
fi
if [[ ! -f /usr/local/bin/xkegs ]]; then
echo "A2CLOUD: Building KEGS from source..."
sudo apt-get -y install build-essential &> /dev/null
sudo apt-get -y install libx11-dev libxext-dev xfonts-base &> /dev/null
sudo apt-get -y clean
mkdir -p /tmp/a2cloud-install/kegs
cd /tmp/a2cloud-install/kegs
wget -q -O kegs.tgz kegs.sourceforge.net/kegs.0.91.tar.gz
tar zxf kegs.tgz
cd kegs.0.91/src
rm vars 2> /dev/null
ln -s vars_x86linux vars
if [[ $isRpi ]]; then
sudo sed -i 's/march=pentium/march=armv6k/' vars_x86linux
fi
make &> /dev/null
gcc -o ../to_pro to_pro.c &> /dev/null
gcc -o ../partls partls.c &> /dev/null
sudo cp -P ../xkegs ../to_pro ../partls /usr/local/bin
sudo cp ../config.kegs /usr/local/lib
sudo chmod ugo+w /usr/local/lib/config.kegs
cd /tmp/a2cloud-install
rm -rf kegs
fi
if [[ $slot6 ]]; then
echo "A2CLOUD: Putting blank disks in KEGS slot 6..."
sudo sed -i 's@^s6d1.*$@s6d1 = /usr/local/share/gsdisks/slot6drive1.po@' /usr/local/lib/config.kegs
sudo sed -i 's@^s6d2.*$@s6d2 = /usr/local/share/gsdisks/slot6drive2.po@' /usr/local/lib/config.kegs
if [[ ! -f /usr/local/share/gsdisks/slot6drive1.po || ! -f /usr/local/share/gsdisks/slot6drive2.po ]]; then
wget -qO- ivanx.com/a2cloud/files/slot6.tgz | sudo tar Pzx 2> /dev/null
fi
fi
else
echo "A2CLOUD: KEGS is already installed."
fi
echo "A2CLOUD: Updating KEGS launch and setup files..."
sudo addgroup kegs &> /dev/null
sudo chgrp kegs /usr/local/bin/xkegs
sudo chmod u+s /usr/local/bin/xkegs
sudo wget -qO /usr/local/bin/kegs ivanx.com/a2cloud/setup/kegs.txt
sudo chmod ugo+x /usr/local/bin/kegs
sudo wget -qO /usr/local/bin/kegs-setup ivanx.com/a2cloud/setup/kegs-setup-shell.txt
sudo chmod ugo+x /usr/local/bin/kegs-setup
# GSport, if non-RPi
if [[ ! $isRpi && ! -f /usr/local/bin/gsport ]]; then
echo "A2CLOUD: Installing GSport..."
cd /tmp/a2cloud-install
if [[ $downloadBinaries ]]; then
sudo apt-get -y install libpcap0.8-dev &> /dev/null
sudo apt-get -y clean
if [[ $isDebian ]]; then
wget -qO- ivanx.com/a2cloud/files/gsport-debian7_x86.tgz | sudo tar Pzx 2> /dev/null
fi
fi
if [[ ! -f /usr/local/bin/gsport ]]; then
echo "A2CLOUD: Building GSport from source..."
sudo apt-get -y install build-essential &> /dev/null
sudo apt-get -y install libx11-dev libxext-dev xfonts-base libpcap0.8-dev &> /dev/null
sudo apt-get -y clean > /dev/null
mkdir -p /tmp/a2cloud-install/gsport
cd /tmp/a2cloud-install/gsport
wget -q -O gsport.tgz downloads.sourceforge.net/project/gsport/GSport-0.31/gsport_0.31.tar.gz
tar zxf gsport.tgz
cd gsport*/src
rm vars 2> /dev/null
ln -s vars_x86linux vars
make &> /dev/null
gcc -o ../to_pro to_pro.c &> /dev/null
gcc -o ../partls partls.c &> /dev/null
sudo cp -P ../gsportx ../to_pro ../partls /usr/local/bin
sudo cp ../config.txt /usr/local/lib
sudo chmod ugo+w /usr/local/lib/config.txt
make clean &> /dev/null
rm vars
cp vars_fbrpilinux vars
sed -i 's/-march=armv6/-march=i686/' vars
make &> /dev/null
sudo cp -P ../gsportfb /usr/local/bin
cd /usr/local/lib
sudo ln -s config.txt gsport_config.txt 2> /dev/null
cd /tmp/a2cloud-install
rm -rf gsport
fi
if [[ $slot6 ]]; then
echo "A2CLOUD: Putting blank disks in GSport slot 6..."
sudo sed -i 's@^s6d1.*$@s6d1 = /usr/local/share/gsdisks/slot6drive1.po@' /usr/local/lib/config.txt
sudo sed -i 's@^s6d2.*$@s6d2 = /usr/local/share/gsdisks/slot6drive2.po@' /usr/local/lib/config.txt
if [[ ! -f /usr/local/share/gsdisks/slot6drive1.po || ! -f /usr/local/share/gsdisks/slot6drive2.po ]]; then
wget -qO- ivanx.com/a2cloud/files/slot6.tgz | sudo tar Pzx 2> /dev/null
fi
fi
# enable AppleTalk
if ! grep -q 'g_appletalk_turbo' /usr/local/lib/config.txt; then
if grep -q 'bram1[00]' /usr/local/lib/config.txt; then
sudo sed -i 's/^\(bram1\[00\]\)/g_appletalk_turbo = 1\n\n\1/' /usr/local/lib/config.txt
else
echo -e '\ng_appletalk_turbo = 1' | sudo tee -a /usr/local/lib/config.txt > /dev/null
fi
fi
sudo sed -i 's/g_appletalk_turbo = 0/g_appletalk_turbo = 1/' /usr/local/lib/config.txt
# enable Uthernet
if ! grep -q 'g_ethernet[^_]' /usr/local/lib/config.txt; then
if grep -q 'bram1[00]' /usr/local/lib/config.txt; then
sudo sed -i 's/^\(bram1\[00\]\)/g_ethernet = 1\n\n\1/' config.txt
else
echo -e '\ng_ethernet = 1' | sudo tee -a /usr/local/lib/config.txt > /dev/null
fi
fi
sudo sed -i 's/g_ethernet = 0/g_ethernet = 1/' /usr/local/lib/config.txt
else
[[ ! $isRpi ]] && echo "A2CLOUD: GSport is already installed."
fi
if [[ ! $isRpi ]]; then
echo "A2CLOUD: Updating GSport launch and setup files..."
sudo addgroup gsport &> /dev/null
sudo chgrp gsport /usr/local/bin/gsportfb
sudo chmod u+s /usr/local/bin/gsportfb
sudo chgrp gsport /usr/local/bin/gsportx
sudo chmod u+s /usr/local/bin/gsportx
sudo wget -qO /usr/local/bin/gsport ivanx.com/a2cloud/setup/gsport.txt
sudo chmod ugo+x /usr/local/bin/gsport
sudo wget -qO /usr/local/bin/gsport-setup ivanx.com/a2cloud/setup/gsport-setup-shell.txt
sudo chmod ugo+x /usr/local/bin/gsport-setup
fi
# LinApple
if [[ ! -f /usr/local/linapple/linapple ]]; then
echo "A2CLOUD: Installing LinApple..."
cd /tmp/a2cloud-install
if [[ $downloadBinaries ]]; then
if [[ $isRpi ]]; then
wget -qO- ivanx.com/a2cloud/files/linapple-rpi.tgz | sudo tar Pzx
elif [[ $isDebian ]]; then
wget -qO- ivanx.com/a2cloud/files/linapple-debian7_x86.tgz | sudo tar Pzx
fi
fi
if [[ ! -f /usr/local/linapple/linapple ]]; then
sudo apt-get -y install build-essential
sudo apt-get -y install libsdl1.2-dev libcurl4-openssl-dev zlib1g-dev libzip-dev
sudo apt-get -y clean
rm -rf /tmp/a2cloud-install/linapple* &> /dev/null
mkdir -p /tmp/a2cloud-install/linapple
cd /tmp/a2cloud-install/linapple
wget -q -O linapple.tar.bz2 downloads.sourceforge.net/project/linapple/linapple/linapple-2a/linapple-src_2a.tar.bz2
tar jxf linapple.tar.bz2
cd linapple-src_2a/src
# doesn't compile with gcc 4.7, so use older version
if (( $(g++ --version | head -1 | rev | cut -f 1 -d ' ' | rev | tr -d '.') >= 470 )); then
sudo apt-get -y install g++-4.6
sudo apt-get -y clean
sed -i 's@CXX ?= c++@CXX = /usr/bin/g++-4.6@' Makefile
fi
make
sudo make install
cd /tmp/a2cloud-install
rm -rf linapple
fi
else
echo "A2CLOUD: LinApple is already installed."
fi
echo "A2CLOUD: Updating LinApple launch file..."
sudo wget -qO /usr/local/bin/linapple ivanx.com/a2cloud/setup/linapple.txt
sudo chmod ugo+x /usr/local/bin/linapple
fi
if [[ $installArchiveTools ]]; then
if [[ ! -f /usr/local/bin/nulib2 || ! -f /usr/local/bin/sciibin || ! -f /usr/local/bin/usq ]]; then
echo "A2CLOUD: Installing nulib2, sciibin, unblu, unbit, unexec, usq..."
cd /tmp/a2cloud-install
if [[ $downloadBinaries ]]; then
if [[ $isRpi ]]; then
wget -qO- ivanx.com/a2cloud/files/nulib2-rpi.tgz | sudo tar Pzx
elif [[ $isDebian ]]; then
wget -qO- ivanx.com/a2cloud/files/nulib2-debian7_x86.tgz | sudo tar Pzx
fi
fi
if [[ ! -f /usr/local/bin/nulib2 ]]; then
sudo apt-get -y install build-essential
sudo apt-get -y install zlib1g-dev
sudo apt-get -y clean
# install nulib2
rm -rf nulib &> /dev/null
mkdir -p nulib
cd nulib
wget -qO nulib.tgz http://web.archive.org/web/20131031160750/http://www.nulib.com/downloads/nulibdist.tar.gz
tar zxf nulib.tgz
cd nufxlib*
./configure
make
sudo make install
cd ../nulib2*
./configure
make
sudo make install
cd /tmp/a2cloud-install
rm -rf nulib
fi
if [[ ! -f /usr/local/bin/sciibin || ! -f /usr/local/bin/usq ]]; then
# install sciibin/unblu/unbit/unexec/usq
sudo apt-get -y install build-essential
sudo apt-get -y clean
rm -rf undoit &> /dev/null
mkdir -p undoit
cd undoit
wget -q http://web.archive.org/web/20110619163030/http://fadden.com/dl-apple2/undoit.zip
unzip undoit.zip
make
sudo mv sciibin unbit unblu unexec usq /usr/local/bin
cd /tmp/a2cloud-install
rm -rf undoit
fi
else
echo "A2CLOUD: nulib2, sciibin, unblu, unbit, unexec, usq are already installed."
fi
echo "A2CLOUD: Setting up shk2image command..."
sudo wget -qO /usr/local/bin/shk2image ivanx.com/a2cloud/setup/shk2image.txt
sudo chmod ugo+x /usr/local/bin/shk2image
# download and install The Unarchiver, for expanding apple.com disk images
# http://wakaba.c3.cx/s/apps/unarchiver.html
if [[ ! -f /usr/local/bin/unar ]]; then
echo "A2CLOUD: Installing The Unarchiver..."
cd /tmp/a2cloud-install
if [[ $downloadBinaries ]]; then
if [[ $isRpi || $isDebian ]]; then
sudo apt-get -y install libgnustep-base1.22
sudo apt-get -y clean
if [[ $isRpi ]]; then
wget -qO- ivanx.com/a2cloud/files/unar-rpi.tgz | sudo tar Pzx
elif [[ $isDebian ]]; then
wget -qO- ivanx.com/a2cloud/files/unar-debian7_x86.tgz | sudo tar Pzx
fi
fi
fi
if [[ ! -f /usr/local/bin/unar ]]; then
sudo apt-get -y install build-essential
sudo apt-get -y install libgnustep-base-dev libz-dev libbz2-dev
sudo apt-get -y install libssl-dev libicu-dev unzip
sudo apt-get -y clean
rm -rf unar &> /dev/null
mkdir -p unar
cd unar
wget -q -nc http://theunarchiver.googlecode.com/files/unar1.7_src.zip
unzip -o unar1.7_src.zip
cd The\ Unarchiver/XADMaster
make -f Makefile.linux
sudo mv lsar unar /usr/local/bin
cd ../Extra
sudo mkdir -p /usr/local/man/man1
sudo mv lsar.1 unar.1 /usr/local/man/man1
cd /tmp/a2cloud-install
rm -rf unar
fi
sudo mandb &> /dev/null
else
echo "A2CLOUD: The Unarchiver is already installed."
fi
fi
# add shortcuts to LXDE desktop and menu
if [[ -f /usr/bin/X ]]; then
[[ -d /etc/xdg/lxsession/LXDE-pi ]] && lxde="lxde-pi" || lxde="lxde"
echo "A2CLOUD: Creating LXDE desktop and menu shortcuts..."
# remove auto-open Terminal window from pre-1.8.0
echo "A2CLOUD: removing auto-open LXDE terminal window (if present)..."
sudo rm /etc/xdg/autostart/lxterminal.desktop 2> /dev/null
# create "AppleII" category
mkdir -p ~/.config/menus
if [[ ! -f ~/.config/menus/${lxde}-applications.menu ]]; then
mkdir -p ~/.config/menus
echo -e "<!DOCTYPE Menu PUBLIC \"-//freedesktop//DTD Menu 1.0//EN\" \"http://www.freedesktop.org/standards/menu-spec/1.0/menu.dtd\">\n<Menu>\n <Name>A2CLOUD menu extension</Name>\n <MergeFile type=\"parent\">/etc/xdg/menus/${lxde}-applications.menu</MergeFile>\n <Menu>\n <Name>Apple II</Name>\n <Directory>lxde-appleii.directory</Directory>\n <Include>\n <And><Category>AppleII</Category></And>\n </Include>\n </Menu>\n</Menu>\n" > ~/.config/menus/${lxde}-applications.menu
else
grep -q AppleII ~/.config/menus/${lxde}-applications.menu || echo "A2CLOUD: LXDE child category file exists, not creating Apple II category."
fi
# create "Apple II" menu entry
sudo mkdir -p /usr/local/share/desktop-directories
echo -e "[Desktop Entry]\nName=Apple II\nComment=Programs and utilities related to the Apple II\nIcon=/usr/local/linapple/icon.bmp\nType=Directory\n" | sudo tee /usr/local/share/desktop-directories/lxde-appleii.directory > /dev/null
# create menu and desktop shortcuts
sudo mkdir -p /usr/local/share/applications
# create user desktop items folder
mkdir -p ~/Desktop
# GSport:
if [[ -f /usr/bin/gsport ]]; then
echo -e "[Desktop Entry]\nName=GSport\nComment=Apple IIgs Emulator\nExec=lxterminal -e /usr/bin/gsport\nIcon=/usr/local/share/gsport32.ico\nTerminal=false\nType=Application\nCategories=AppleII\n" | sudo tee /usr/local/share/applications/gsport.desktop > ~/Desktop/gsport.desktop
elif [[ -f /usr/local/bin/gsport ]]; then
echo -e "[Desktop Entry]\nName=GSport\nComment=Apple IIgs Emulator\nExec=lxterminal -e /usr/local/bin/gsport\nIcon=/usr/local/share/gsport32.ico\nTerminal=false\nType=Application\nCategories=AppleII\n" | sudo tee /usr/local/share/applications/gsport.desktop > ~/Desktop/gsport.desktop
fi
if [[ ! -f /usr/local/share/gsport32.ico ]]; then
sudo wget -qO /usr/local/share/gsport32.ico ivanx.com/a2cloud/files/gsport32.ico
fi
# KEGS:
if [[ -f /usr/local/bin/kegs ]]; then
echo -e "[Desktop Entry]\nName=KEGS\nComment=Apple IIgs Emulator\nExec=lxterminal -e /usr/local/bin/kegs\nIcon=/usr/local/share/kegsicon.png\nTerminal=false\nType=Application\nCategories=AppleII\n" | sudo tee /usr/local/share/applications/kegs.desktop > /dev/null
[[ ! -f ~/Desktop/gsport.desktop ]] && cp /usr/local/share/applications/kegs.desktop ~/Desktop/kegs.desktop
fi
if [[ ! -f /usr/local/share/kegsicon.png ]]; then
sudo wget -qO /usr/local/share/kegsicon.png ivanx.com/a2cloud/files/kegsicon.png
fi
# LinApple:
if [[ -f /usr/local/bin/linapple ]]; then
echo -e "[Desktop Entry]\nName=LinApple\nComment=Apple IIe Emulator\nExec=lxterminal -e /usr/local/bin/linapple\nIcon=/usr/local/linapple/icon.bmp\nTerminal=false\nType=Application\nCategories=AppleII\n" | sudo tee /usr/local/share/applications/linapple.desktop > ~/Desktop/linapple.desktop
fi
# ADTPro Server:
if [[ -f /usr/local/bin/adtpro.sh ]]; then
echo -e "[Desktop Entry]\nName=ADTPro Server\nComment=Floppy Transfer Utility\nExec=/usr/local/bin/adtpro.sh\nIcon=/usr/local/adtpro/lib/ADTPro.ico\nTerminal=false\nType=Application\nCategories=AppleII\n" | sudo tee /usr/local/share/applications/adtproserver.desktop > ~/Desktop/adtproserver.desktop
fi
# LXTerminal:
if [[ ! $(grep lxterminal.desktop /etc/xdg/lxpanel/profile/LXDE-pi/panels/panel 2> /dev/null) && ! -f ~/Desktop/lxterminal.desktop ]]; then
cp /usr/share/applications/lxterminal.desktop ~/Desktop/lxterminal.desktop
fi
# prevent PolicyKit error on GUI startup
sudo sed -i 's/^NotShowIn=GNOME;KDE;\?$/NotShowIn=GNOME;KDE;LXDE/' /etc/xdg/autostart/lxpolkit.desktop 2> /dev/null
sed -i 's/^NotShowIn=GNOME;KDE;\?$/NotShowIn=GNOME;KDE;LXDE/' /home/$USER/.config/autostart/lxpolkit.desktop 2> /dev/null
fi
# create A2CLOUD disk
if [[ ( $updateADTPro || $createBootDisk ) && -f /usr/local/bin/acmd ]]; then
a2CloudDisk=/usr/local/adtpro/disks/A2CLOUD.PO
else
a2CloudDisk=
fi
if [[ $a2CloudDisk ]]; then
echo
echo "A2CLOUD: Preparing A2CLOUD disk images..."
cd /tmp/a2cloud-install
a2CloudDisk140=${a2CloudDisk%%.*}.DSK
if [[ ! -f $a2CloudDisk && ! -f $a2CloudDisk140 ]]; then
makeA2CloudDisk=1
else
[[ -f $a2CloudDisk ]] && echo "A2CLOUD: $a2CloudDisk already exists."
[[ -f $a2CloudDisk140 ]] && echo "A2CLOUD: $a2CloudDisk140 already exists."
echo " If you want a fresh copy, please move or delete as needed."
makeA2CloudDisk=
fi
if [[ ! $makeA2CloudDisk ]]; then # not getting/building disks
a2CloudDiskUpdated=
if [[ $updateADTPro && -f "$a2CloudDisk" ]]; then # does existing 800K disk need updating?
sudo pkill -f [A]DTPro
echo "A2CLOUD: Updating ADTPro and VDrive on 800K A2CLOUD disk..."
acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VEDRIVE - | acmd -p "$a2CloudDisk" VEDRIVE SYS
acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPROAUD - | acmd -p "$a2CloudDisk" ADTPROAUD SYS
acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPROETH - | acmd -p "$a2CloudDisk" ADTPROETH SYS
acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPRO.BIN - | acmd -p "$a2CloudDisk" ADTPRO.BIN BIN \$0800
acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPROAUD.BIN - | acmd -p "$a2CloudDisk" ADTPROAUD.BIN SYS \$0800
acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPROETH.BIN - | acmd -p "$a2CloudDisk" ADTPROETH.BIN SYS \$0800
acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VEDRIVE.CONFIG - | acmd -p "$a2CloudDisk" VEDRIVE.CONFIG BAS
acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPRO - | acmd -p "$a2CloudDisk" ADTPRO SYS
acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE - | acmd -p "$a2CloudDisk" VSDRIVE SYS
acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE.LOW - | acmd -p "$a2CloudDisk" VSDRIVE.LOW SYS
a2CloudDiskUpdated=1
fi
if [[ $updateADTPro && -f "$a2CloudDisk140" ]]; then # does existing 140K disk need updating?
sudo pkill -f [A]DTPro
echo "A2CLOUD: Updating ADTPro and VDrive on 140K A2CLOUD disk..."
acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPRO.BIN - | acmd -p "$a2CloudDisk140" ADTPRO.BIN BIN \$0800
acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPRO - | acmd -p "$a2CloudDisk140" ADTPRO SYS
acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE - | acmd -p "$a2CloudDisk140" VSDRIVE SYS
acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE.LOW - | acmd -p "$a2CloudDisk140" VSDRIVE.LOW SYS
a2CloudDiskUpdated=1
fi
if [[ $a2CloudDiskUpdated ]]; then
echo
echo "Your A2CLOUD boot disk images have been updated. You may want"
echo " to update your boot floppy with their current contents using ADTPro."
fi
echo
else # building or downloading disks
sudo pkill -f [A]DTPro
if [[ ! $buildA2CloudDisk ]]; then
echo "A2CLOUD: Downloading 800K disk image..."
wget -qO $a2CloudDisk ivanx.com/a2cloud/files/A2CLOUD.PO
echo "A2CLOUD: Downloading 140K disk image..."
wget -qO $a2CloudDisk140 ivanx.com/a2cloud/files/A2CLOUD.DSK
fi
# build if we don't have a disk image
# (because download failed or -b argument was used)
if [[ ! -f $a2CloudDisk || ( $(wc -c $a2CloudDisk | cut -f 1 -d ' ') != "819200" ) ]]; then
# start with a disk image
echo "A2CLOUD: Creating 800K disk image..."
cp /usr/local/adtpro/disks/ADTPRO-*PO $a2CloudDisk
acmd -n $a2CloudDisk A2CLOUD
# ADTPro
echo "A2CLOUD: Preparing ADTPro..."
acmd -d "$a2CloudDisk" BASIC
acmd -d "$a2CloudDisk" STARTUP.SYSTEM
acmd -d "$a2CloudDisk" ADTPRO
# start from ADTPro distribution image and replace BASIC.SYSTEM 1.4.1 with 1.5
wget -qO Disk_3_of_7-SystemTools1.sea.bin http://archive.org/download/download.info.apple.com.2012.11/download.info.apple.com.2012.11.zip/download.info.apple.com%2FApple_Support_Area%2FApple_Software_Updates%2FEnglish-North_American%2FApple_II%2FApple_IIGS_System_6.0.1%2FDisk_3_of_7-SystemTools1.sea.bin
unar -k skip Disk_3_of_7-SystemTools1.sea.bin &> /dev/null
mv 'Disk 3 of 7-SystemTools1.sea' SystemTools1.dc42
acmd -g SystemTools1.dc42 BASIC.SYSTEM - | acmd -p "$a2CloudDisk" BASIC.SYSTEM SYS
# use our startup program
wget -qO- ivanx.com/a2cloud/files/STARTUP.BAS | acmd -p "$a2CloudDisk" STARTUP BAS
# VEDRIVE
echo "A2CLOUD: Copying VEDRIVE..."
acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VEDRIVE - | acmd -p "$a2CloudDisk" VEDRIVE SYS
acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VEDRIVE.CONFIG - | acmd -p "$a2CloudDisk" VEDRIVE.CONFIG BAS
# Apple System Utilities 3.1 support files
if [[ -f /usr/local/bin/unar ]]; then
echo "A2CLOUD: Downloading and copying System Utilities support files..."
cd /tmp/a2cloud-install
wget -qO Apple_II_System_Disk_3.2.sea.bin http://archive.org/download/download.info.apple.com.2012.11/download.info.apple.com.2012.11.zip/download.info.apple.com%2FApple_Support_Area%2FApple_Software_Updates%2FEnglish-North_American%2FApple_II%2FApple_II_Supplemental%2FApple_II_System_Disk_3.2.sea.bin
unar -k skip Apple_II_System_Disk_3.2.sea.bin &> /dev/null
dd if='Apple II System Disk 3.2.sea' of=A2SYSDISK32.PO bs=1 skip=84 count=819200 2> /dev/null
acmd -g A2SYSDISK32.PO UTIL.0 - | acmd -p "$a2CloudDisk" UTIL.0 BIN \$0900
acmd -g A2SYSDISK32.PO UTIL.1 - | acmd -p "$a2CloudDisk" UTIL.1 BIN \$0E00
acmd -g A2SYSDISK32.PO UTIL.2 - | acmd -p "$a2CloudDisk" UTIL.2 BIN \$B400
else
echo "A2CLOUD: unar is not available; not installing System Utilities support files."
fi
# ProTERM
echo "A2CLOUD: Downloading ProTERM..."
wget --user-agent="Mozilla/5.0 (wget_A2CLOUD; rv:1.13.4) Gecko/20100101 Firefox/4.0.1" -qO /tmp/a2cloud-install/pt31.shk http://lostclassics.apple2.info/download/InTrec/PT31A2GM2K9.SHK
mkdir -p /tmp/a2cloud-install/pt31
cd /tmp/a2cloud-install/pt31
nulib2 -xse ../pt31.shk > /dev/null
# IIc slot 1 patch for ProTERM from Hugh Hood
echo "A2CLOUD: Patching ProTERM for IIc printer port use..."
writecharsHex "PT3.CODE0#060000" 1638 "41.70.70.6C.65.20.49.49.63.2F.49.49.63.2B.20.50.72.69.6E.74.65.72.20.50.6F.72.74.20.20.20.20.20.06.07.10.41.70.70.6C.65.20.49.49.63.2F.49.49.63.2B.20.4D.6F.64.65.6D.20.50.6F.72.74.20.20.20.20.20.20.20.06.07.20"
echo "A2CLOUD: Copying ProTERM..."
for thisFile in /tmp/a2cloud-install/pt31/*; do
filenameUnix="${thisFile##*/}"
filename="${filenameUnix%%#*}"
filetype="${filenameUnix##*#}"
if [[ $filename != "PT3.DIAL" && $filename != "ProDOS" && $filename != "PT3.BACKUP" && $filename != "PT3.SYSTEM" ]]; then
acmd -p "$a2CloudDisk" $filename \$${filetype:0:2} \$${filetype:2:4} < $thisFile
fi
done
acmd -p "$a2CloudDisk" PT3.DIAL/PTD.SPACEBAR COM \$8002 < /tmp/a2cloud-install/pt31/PT3.DIAL/"PTD.SPACEBAR#598002"
echo "A2CLOUD: Adding 115200 baud macros for ProTERM..."
wget -qO PT3.IIC.MACRO ivanx.com/a2cloud/files/PT3.IIC.MACRO.txt
cat "PT3.GLOBAL#040000" | tr '\r' '\n' | sed ':a;N;$!ba;s/\n\*\nOPTION-f : Unused & available.\n\*/~~~/' | sed -e '/~~~/r PT3.IIC.MACRO' -e 's///' | tr '\n' '\r' | acmd -p "$a2CloudDisk" PT3.IIC.GLOBAL TXT
wget -qO PT3.IIE.MACRO ivanx.com/a2cloud/files/PT3.IIE.MACRO.txt
cat "PT3.GLOBAL#040000" | tr '\r' '\n' | sed ':a;N;$!ba;s/\n\*\nOPTION-f : Unused & available.\n\*/~~~/' | sed -e '/~~~/r PT3.IIE.MACRO' -e 's///' | tr '\n' '\r' | acmd -p "$a2CloudDisk" PT3.IIE.GLOBAL TXT
wget -qO PT3.IIGS.MACRO ivanx.com/a2cloud/files/PT3.IIGS.MACRO.txt
cat "PT3.GLOBAL#040000" | tr '\r' '\n' | sed ':a;N;$!ba;s/\n\*\nOPTION-h : Unused & available.\n\*\n\n\*\nOPTION-H : Unused & available.\n\*/~~~/' | sed -e '/~~~/r PT3.IIGS.MACRO' -e 's///' | tr '\n' '\r' | acmd -p "$a2CloudDisk" PT3.IIGS.GLOBAL TXT
acmd -p "$a2CloudDisk" PROTERM SYS < /tmp/a2cloud-install/pt31/"PT3.SYSTEM#ff2000"
cd /tmp/a2cloud-install
rm -rf /tmp/a2cloud-install/pt31
# Z-Link
echo "A2CLOUD: Downloading and copying Z-Link..."
cd /tmp/a2cloud-install
wget -qO /tmp/a2cloud-install/zlink.shk "ftp://ftp.gno.org/pub/apple2/prodos/comm/term/zLink91.shk"
nulib2 -p zlink.shk z.link.system | acmd -p "$a2CloudDisk" Z.LINK SYS
# ShrinkIt
echo "A2CLOUD: Downloading and copying ShrinkIt..."
cd /tmp/a2cloud-install
wget -qO shrinkit.sdk http://web.archive.org/web/20131031160750/http://www.nulib.com/library/shrinkit.sdk
[[ ! -f shrinkit.sdk ]] && wget -qO shrinkit.sdk ivanx.com/a2cloud/files/shrinkit.sdk
nulib2 -xs shrinkit.sdk > /dev/null
acmd -g /tmp/a2cloud-install/SHRINKIT SHRINKIT - | acmd -p "$a2CloudDisk" SHRINKIT SYS
acmd -g /tmp/a2cloud-install/SHRINKIT SHRINKIT.SYSTEM - | acmd -p "$a2CloudDisk" SHRINKIT.SYS SYS
acmd -g /tmp/a2cloud-install/SHRINKIT IIPLUS.SHRINKIT - | acmd -p "$a2CloudDisk" IIPLUS.SHRINKIT SYS
acmd -g /tmp/a2cloud-install/SHRINKIT IIPLUS.UNSHRINK - | acmd -p "$a2CloudDisk" IIPLUS.UNSHRINK SYS
# DSK2FILE
echo "A2CLOUD: Downloading and copying DSK2FILE..."
cd /tmp/a2cloud-install
wget -q -O dsk2file.shk http://www.dwheeler.com/6502/oneelkruns/dsk2file.zip
nulib2 -p dsk2file.shk dsk2file58 | acmd -p "$a2CloudDisk" DSK2FILE SYS
# Apple System Utilities 3.1 launch file
if [[ -f /usr/local/bin/unar ]]; then
echo "A2CLOUD: Copying System Utilities launch file..."
acmd -g A2SYSDISK32.PO SYSUTIL.SYSTEM - | acmd -p "$a2CloudDisk" SYSUTIL SYS
else
echo "A2CLOUD: unar is not available; not installing System Utilities."
fi
# Filer
echo "A2CLOUD: Downloading and copying Filer..."
wget -qO /tmp/a2cloud-install/mmgr.prutil.sdk ftp://ftp.gno.org/pub/apple2/prodos/comm/term/modem.mgr/mmgr.prutil.sdk
cd /tmp/a2cloud-install
nulib2 -xs mmgr.prutil.sdk > /dev/null
acmd -g /tmp/a2cloud-install/MMGR FILER - | acmd -p "$a2CloudDisk" FILER SYS
# ADTPRO launch
echo "A2CLOUD: Copying ADTPro launch file..."
acmd -g /usr/local/adtpro/disks/ADTPRO-*DSK ADTPRO - | acmd -p "$a2CloudDisk" ADTPRO SYS
# VSDRIVE
if [[ ! $(acmd -ls "$a2CloudDisk" | grep '^VSDRIVE BIN') ]]; then
echo "A2CLOUD: Copying VSDRIVE..."
acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE - | acmd -p "$a2CloudDisk" VSDRIVE SYS
acmd -g /usr/local/adtpro/disks/VDRIVE-*DSK VSDRIVE.LOW - | acmd -p "$a2CloudDisk" VSDRIVE.LOW BIN \$2000
else
echo "A2CLOUD: VSDRIVE is already on the target disk image."
fi
fi
if [[ ! -f $a2CloudDisk140 || ( $(wc -c $a2CloudDisk140 | cut -f 1 -d ' ') != "143360" ) ]]; then
echo "A2CLOUD: Creating 140K disk image..."
mkpo "$a2CloudDisk140" A2CLOUD
dd bs=256 count=1 of="$a2CloudDisk140" conv=notrunc 2> /dev/null < /usr/local/adtpro/disks/ADTPRO-*DSK
dd bs=256 count=1 of="$a2CloudDisk140" skip=14 seek=14 conv=notrunc 2> /dev/null < /usr/local/adtpro/disks/ADTPRO-*DSK
acmd -g $a2CloudDisk BASIC.SYSTEM - | acmd -p $a2CloudDisk140 BASIC.SYSTEM SYS
acmd -g $a2CloudDisk PRODOS - | acmd -p $a2CloudDisk140 PRODOS SYS
acmd -g $a2CloudDisk STARTUP - | acmd -p $a2CloudDisk140 STARTUP BAS
acmd -g $a2CloudDisk ADTPRO.BIN - | acmd -p $a2CloudDisk140 ADTPRO.BIN BIN \$0800
acmd -g $a2CloudDisk Z.LINK - | acmd -p $a2CloudDisk140 Z.LINK SYS
acmd -g $a2CloudDisk IIPLUS.SHRINKIT - | acmd -p $a2CloudDisk140 IIPLUS.SHRINKIT SYS
acmd -g $a2CloudDisk IIPLUS.UNSHRINK - | acmd -p $a2CloudDisk140 IIPLUS.UNSHRINK SYS
acmd -g $a2CloudDisk FILER - | acmd -p $a2CloudDisk140 FILER SYS
acmd -g $a2CloudDisk ADTPRO - | acmd -p $a2CloudDisk140 ADTPRO SYS
acmd -g $a2CloudDisk VSDRIVE - | acmd -p $a2CloudDisk140 VSDRIVE SYS
acmd -g $a2CloudDisk VSDRIVE.LOW - | acmd -p $a2CloudDisk140 VSDRIVE.LOW BIN \$2000
fi
# A2PI
if [[ ! $(acmd -ls "$a2CloudDisk" | grep '^ A2PI BIN') ]]; then
echo "A2CLOUD: Downloading and copying A2PI client..."
mkdir -p /tmp/a2cloud-install/a2pi
cd /tmp/a2cloud-install/a2pi
wget -qO a2pi.deb http://schmenk.is-a-geek.com/tarfiles/a2pi_armhf.deb
# dpkg-deb --fsys-tarfile a2pi.deb | tar --strip-components=4 --wildcards -O -x ./usr/share/a2pi/A2PI*.PO > A2PI.PO
dpkg-deb --fsys-tarfile a2pi.deb | tar --strip-components=4 --wildcards -x ./usr/share/a2pi/A2PI*.PO
a2piImage=$(ls -1r A2PI*.PO | head -1)
mkdir a2pidisk
cppo -e "$a2piImage" a2pidisk &> /dev/null
mv a2pidisk/A2PI* a2pidisk/A2PI
cd a2pidisk/A2PI
rm PRODOS* *A3* BASIC.SYSTEM*
cd ..
nulib2 -a -r -e ../a2pi.shk A2PI &> /dev/null
cd ..
shk2image a2pi.shk $a2CloudDisk &> /dev/null
shk2image a2pi.shk $a2CloudDisk140 &> /dev/null
cd /tmp/a2cloud-install
rm -rf a2pi
else
echo "A2CLOUD: A2PI client is already on the target disk image."
fi
if [[ -f /usr/local/adtpro/disks/Virtual.po && ! -L /usr/local/adtpro/disks/Virtual.po ]]; then
mv /usr/local/adtpro/disks/Virtual.po /usr/local/adtpro/disks/defaultVirtual.po &> /dev/null
vsd1 -f /usr/local/adtpro/disks/defaultVirtual.po
fi
if [[ -f /usr/local/adtpro/disks/Virtual2.po && ! -L /usr/local/adtpro/disks/Virtual2.po ]]; then
if [[ $(sha1sum /usr/local/adtpro/disks/Virtual2.po | cut -d ' ' -f 1) == "41c178f9f596f94ea7607624672552137dccade2" ]]; then
rm /usr/local/adtpro/disks/Virtual2.po
else
mv /usr/local/adtpro/disks/Virtual2.po /usr/local/adtpro/disks/defaultVirtual2.po &> /dev/null
fi
fi
vsd2 -f $a2CloudDisk
# for compatibility with pre-1.6.7
ln -s /usr/local/adtpro/disks/A2CLOUD.PO /usr/local/adtpro/disks/A2CLOUD.HDV
echo
echo "Your A2CLOUD disk images are ready. They are called"
echo "A2CLOUD.DSK (140K) and A2CLOUD.PO (800K), and are stored in"
echo "/usr/local/adtpro/disks"
echo
echo "You can transfer to a floppy with ADTPro, or access"
echo "the 800K image with VSDRIVE at S2,D2."
echo
echo "See http://ivanx.com/a2cloud for more info."
echo
fi
fi
# make new blank disk of specified size
if [[ $newImageName ]]; then
echo "A2CLOUD: Creating new ${imageSize}K image for virtual drive 1 at"
echo " /usr/local/adtpro/disks/$newImageName..."
sudo pkill -f [A]DTPro
rm /usr/local/adtpro/disks/Virtual.po &> /dev/null
mkpo -b $(( $imageSize * 2 )) /usr/local/adtpro/disks/"$newImageName" $prodosVolName
vsd1 -f /usr/local/adtpro/disks/"$newImageName"
fi
echo "wget -qO /tmp/a2cloud-setup ivanx.com/a2cloud/setup; source /tmp/a2cloud-setup" | sudo tee /usr/local/bin/a2cloud-setup > /dev/null
sudo chmod ugo+x /usr/local/bin/a2cloud-setup
if [[ ! $restartPrompt ]]; then
adtpro-start 2> /dev/null #start ADTPro if not running and USB adapter attached
fi
echo
echo "A2CLOUD is now ready!"
echo "See http://ivanx.com/a2cloud for instructions."
sudo apt-get -y clean
if [[ $restartPrompt ]]; then
echo
echo -n "Restart your $me now (not required, but recommended)? "
read
if [[ ${REPLY:0:1} == "Y" || ${REPLY:0:1} == "y" ]]; then
doRestart=1
fi
fi
cd "$origDir"
rm setup &> /dev/null
rm a2cloud-setup &> /dev/null
rm -rf /tmp/a2cloud-install &> /dev/null
if [[ -f /usr/local/bin/gsport || -f /usr/bin/gsport || -f /usr/local/bin/kegs ]]; then
sudo addgroup gsport &> /dev/null
sudo addgroup kegs &> /dev/null
sudo usermod -a -G audio,video,netdev,fuse,gsport,plugdev,kegs $USER &> /dev/null
[[ ! $noSetGroups ]] && { groups | grep -q 'kegs.*gsport\|gsport.*kegs' || exec sudo su -l $USER; }
fi
[[ $doRestart ]] && sudo shutdown -r now
# version history:
# future -- local links for everything
# email
# chromium
# version history:
# 1.8.1 -- set JAVA_HOME correctly for Java 8 (Pi, webupd8, Ubuntu for Pi 2B)
# A2PI 1.5 (PiDrive update) on A2CLOUD disk
# ADTPro 2.0.1 server, and 2.0.1 client on A2CLOUD disk
# 1.8.0d-- √ creates shortcuts on desktop for GSport, KEGS, LinApple, ADTPro server on x86
# √ adds LXTerminal to desktop for non-A2Pi version
# √ ProDOS instruction screen on GSOS install
# √ provide via downloaded program that is dd notrunc'd over PRODOS (instead of writeCharsHex)
# √ figure out why lines in autostart are supposed to start with @ (daemon; restarts command on crash)
# √ install AppleCommander-1.3.5.13id (so Spectrum installer will work)
# √ fix mouse not working in VirtualBox framebuffer
# √ requires uninstalling (or temporarily disabling, if possible) VirtualBox guest additions
# √ can be activated if vboxguest module is unloaded *while gsport is running*
# √ offer to uninstall vboxguestmodule if gsport is in run console
# √ rename slot6drive1 and 2 to not contain "-blank" in slot6.tgz and gsport and kegs (x86) archives
# √ add links browser
# √ fix webupd8team getting added twice to sources.list
# √ install GSport for non-Pi
# √ figure out how to replace Raspbian entry in OS json dynamically
# √ command "a2cloud-update rasppleii" to update raspple ii
# √ prevent samba update causing dialog to come up
# √ create rasppleii-update
# √ make rasppleii-update universal even for non-Raspple II installs -- it's just raspbian-update + a2cloud-update + a2server-update
# √ creates shortcuts on desktop for GSport, KEGS, LinApple, ADTPro server on Pi
# √ download gsport and kegs icons
# √ no longer opens terminal window (since icons exist)
# √ (remove /etc/xdg/autostart/lxterminal.desktop)
# √ create aliases for raspbian-update and rasppleii-update
# √ update A2CLOUD help file and aliases for GSport
# √ create raspbian-update
# √ update a2cloud-help
# √ update motd (vm, raspple ii/a2cloud-pi) for gsport
# √ see if shortcuts work in Raspple II 110
# √ check for /etc/xdg/lxsession/LXDE-pi; if so:
# √ create ~/.config/menus/lxde-pi-applications.menu, with reference to /etc/xdg/menus/lxde-pi-applications.menu
# √ no xrandr VBOX0 on the Pi; remove it if present (a2cloud 1.7.x may have put it there)
# √ user groups for pi user not only apple2
# √ gsport-setup and kegs post install text to say ctrl-F12 for reboot
# √ add "links" to motd and help
# √ put a -Xmx128m in acmd so gsport and kegs setup work on Pi A/A+ (256 MB)
# √ added 'disablesafemode' to NOOBS recovery.cmdline (also in raspbian-update) to make it work on (at least) my A+
# √ option for GISK rather than clean setup for GSport on x86
# √ provide actual command for clean GSOS + Spectrum install, which is what gsport runs if no HD available
# √ provide command for clean GSOS install for KEGS
# √ add Dave's preflight/postflight stuff (groups, ownership permissions) for gsport
# √ install libpcap0.8-dev as part of Apple II Pi, GSport install, and GSport launcher
# √ make kegs-setup
# √ make kegs splash text
# √ doesn't add VirtualBox 800x600 if installing on Pi
# √ stop xrandr from being added multiple times to autostart in VirtualBox
# √ only install vbox 800x600 if running in VirtualBox
# √ disable screen blanking in vbox console
# √ disable screensaver in vbox LXDE
# √ disable screen blanking in vbox LXDE
# √ don't create LXTerminal desktop shortcut if RPi
# √ -6 arg provides empty ProDOS disks in S6D1 and S6D2 to GSport to speed things up
# √ -6 arg provides empty ProDOS disks in S6D1 and S6D2 to KEGS to speed things up
# √ can test if password is "raspberry" or "apple2" and advise accordingly
# √ enable Uthernet by default in gsport-setup
# √ enable AppleTalk Turbo by default in gsport-setup
# √ make kegs run as root
# √ consolidate gsport-setup and kegs-setup
# √ gsport-setup is gsport, gsport-setup -k is kegs
# √ clean up KEGS/GSport installer sections to be consistent
# √ create kegs-setup placeholders that call gsport-setup -k
# √ gsport-setup only offer system disks/GSport if java/acmd are available
# √ suppress policykit error that appears after upgrade:
# √ http://www.raspberrypi.org/forums/viewtopic.php?t=98617
# √ see if uninstalling vbox additions is really necessary (nope)
# √ A2SERVER: creates symlink to /usr/local/etc/netatalk in /etc
# √ A2SERVER: -r no repo update option
# √ A2SERVER: can test if password is "raspberry" or "apple2" and advise accordingly
# √ A2SERVER: set AFP password to "apple2"
# √ A2SERVER: automated Windows Sharing install option -w
# √ A2SERVER: automate SMB password set
# √ A2SERVER: fix bug where turning off windows sharing then on again made it not restart at startup
# √ A2SERVER: turnkey (non-prompting) updater
# √ A2SERVER: show current and available versions on run
# √ A2SERVER: -v option to show version and exit
# √ A2SERVER: -h shows help
# √ A2SERVER: prefix status messages with A2SERVER:
# √ A2SERVER: fixed OS X connection problems by adding dhx2 uams files to rpi and x86 tarballs
# √ A2SERVER: set user password to "apple2"
# √ A2SERVER: support a2server-update rasppleii
# √ A2SERVER: automated netboot install option -b
# √ A2SERVER: deletes /tmp/a2server-packageReposUpdated at end
# √ A2SERVER: update help and aliases for raspbian-update
# √ A2SERVER: update a2server-setup rasppleii
# √ A2SERVER: add "a2server-update rasppleii"
# √ A2SERVER: disable screen blanking in Debian VM console
# √ A2SERVER: add raspbian-update and rasppleii-update
# NOOBS:
# √ get photo B slide into all NOOBS slides (even non-a version) and also upload to online
# √ make NOOBS default to US keyboard (recovery.cmdline append lang=en keyboard=us)
# √ make NOOBS-lite 1.4.0+ that can install Raspple II from net, use for upgrade
# √ (change URL and default OS in noobs-master/recovery/config.h
# √ change "raspple" option to 'os' or '-os'
# √ remove silentinstall in raspbian-update
# √ add 'disablesafemode' to recovery.cmdline in Raspple II and Raspple II Lite
# √ make raspbian-update NOOBS-aware, both for standard NOOBS and Raspple II
# 1.7.2 -- manually triggers udev rules during startup if ttyusbhandler script didn't execute (which it doesn't in Raspbian 31-Jan-2015/Kernel 3.18)
# doesn't provide Java space warning if java is already installed
# A/A+ support (vsdrive on direct attach or hub port 3, console on hub port 2)
# 1.7.1 -- full undoit (unblu/unexec/unbit/usq/sciibin)
# debian7_x86 and rpi binaries
# perl version for ttytter not hardcoded
# KEGS and LinApple support on debian_x86
# kegs launch script creates additional symlink called ROM
# linapple launch script sets up framebuffer and udev mouse rule
# apt-get clean after all installs
# installer option to compile all rather than download binaries
# login message mentions A2SERVER if it is installed
# LXDE terminal window now in global autostart (opens for any user)
# LXDE desktop defaults to 800x600 if running in VirtualBox VM
# 1.7.0 -- Java 8
# 1.6.9 -- ADTPro 2.0.0
# new A2CLOUD disks with A2PI client 1.8
# 1.6.8 -- ADTPro 1.3.0
# tests for adtpro existence with either adtpro.sh or ADTPro.html
# installs ttytter from its home page, not via apt-get (because it's in non-free, which is not enabled by default in debian)
# 1.6.7 -- cppo installed from a2cloud directory on web server (a2server has symlink)
# fixed cppo -e bug that always created a resource fork file even if there is no resource fork
# shk2image leaves nothing behind in /tmp
# wildcard copy all files on A2PI disk except PRODOS/BASIC.SYSTEM/*A3* to A2CLOUD disks when building
# @ √ new A2CLOUD disks with A2PI client 1.4
# % update before install for a2chat/a2news/kegs/kegs-setup/linapple/gsport/gsport-setup
# disables IPv6 for exim4 to properly prevent startup error messages; restores log folder if not there
# ^@ A2CLOUD.HDV is now A2CLOUD.PO (with symlink to A2CLOUD.HDV)
# √ renamed MACRO files on server to be .txt and moved to files
# ^@ √ new startup app on disk to make it easier to get to A2PI
# a2cloud-setup updates a2news/a2chat/kegs/kegs-setup/linapple wrappers
# added screen to a2cloud-help
# 1.6.6 -- installs Screen
# installs curl if not installed (for ttytter)
# ttytter alias works correctly if run under Screen
# a2cloudrc is now downloaded rather than created by script
# LANG is now set in /usr/local/etc/a2cloud-lang rather than in a2cloudrc
# fixed bug which checked for nulib2 instead of unar when seeing if needing to compile
# opens terminal window in lxde on startup
# setup -v displays available and installed versions
# setup -y now bypasses all prompts; -n removed
# % setup exits properly whether run via source or shell
# moved cftp to files
# support for x86 Debian/Ubuntu:
# compiles binaries rather than downloads if not running on Pi
# gets and supports Oracle x86 Java if not on Pi
# installs X11 and LXDE if not installed
# ttyUSBupper is always ttyUSB0, ttyUSBlower is always ttyUSB1
# adtpro.sh supports USB-to-serial on all architectures
# 1.6.5 -- term command accepts mono/color/none as synonyms for vt100/pcansi/dumb
# minor reorganization of configuration of a2cloudrc and screenrc
# 1.6.4 -- term command has -f argument to force action
# bash.bashrc now calls /usr/local/etc/a2cloudrc, which calls a2cloud-aliases
# support for screen command (preserves TERM environment variable in new screen)
# 1.6.3 -- sets ttytter to use ssl, and also 7-bit on serial port login, and ansi
# if using TERM=pcansi. Also provides Term::ReadLine::TTYtter for -readline option
# revised command line options and prompt for installing all or selective
# added appleiipi-update command
# 1.6.2 -- installs ISO-8859 (8-bit) character set for serial port login
# adds 'term' command for setting vt100 or ANSI emulation
# apt-get clean at end of A2CLOUD install
# installs sciibin and unblu
# a2cloud-update alias to a2cloud-setup
# 300 baud support by 'baud'
# prevents gsport (A2PI) from running when invoked from serial port
# cmd line option and prompt to install either all, or select individual
# revised intro language
# 1.6.1 -- installs telnet and ttytter
# prevents exim4 error messages after Tin installation
# 1.6.0 -- checks for ADTPro update
# updates ADTPro server and client software
# put adtpro version number into variable and removed hardcoding elsewhere
# asks for prodos volume name for new disk image; 8192 max
# fixed order of files on 140K disk to be consistent with 800K disk
# adtpro-start start now checks for USB adapter before starting
# restarts ADTPro server on vsd1/vsd2 after prompting
# created vsdsync alias to adtpro-restart; acmd warns if neeed
# acmd warns if vsd1/vsd2 changes, and advises vsdsync if so
# acmd now provides acmd help even on AppleCommander error
# 1.6.0 beta
#(unreleased)
# 1.5.3 -- gets motd from web
# prevents /var/log/exim4/paniclog from filling up
# sets password to apple2
# shares /usr/local/adtpro/disks to AFP & SMB
# don't prompt for restart after install by default
# avahi-daemon installed
# backup server for shrinkit
# 1.5.2 -- cleans up at end, downloads disks, full A2PI including extras,
# bug fixes, -h for options
# 1.5.1 -- added dos2pro
# 1.5 -- provides a2chat, a2news, kegs, linapple, a2pi
# 1.23 -- support for new A2PI client
# 1.22 -- downloads base gnustep library for unar/lsar, not full dev packages;
# will still download those and build if binary isn't available for some reason
# same goes for nulib2 and cftp. Should make for speedier install.
# adds A2PI client software to A2CLOUD disk
# disables console getty
# installs xrdp
# adds DSK2FILE to A2CLOUD disk
# 1.7.2 -- manually triggers udev rules during startup if ttyusbhandler script didn't execute (which it doesn't in Raspbian 31-Jan-2015/Kernel 3.18)
# doesn't provide Java space warning if java is already installed
# A/A+ support (vsdrive on direct attach or hub port 3, console on hub port 2)
# 1.7.1 -- full undoit (unblu/unexec/unbit/usq/sciibin)
# debian7_x86 and rpi binaries
# perl version for ttytter not hardcoded
# KEGS and LinApple support on debian_x86
# kegs launch script creates additional symlink called ROM
# linapple launch script sets up framebuffer and udev mouse rule
# apt-get clean after all installs
# installer option to compile all rather than download binaries
# login message mentions A2SERVER if it is installed
# LXDE terminal window now in global autostart (opens for any user)
# LXDE desktop defaults to 800x600 if running in VirtualBox VM
# 1.7.0 -- Java 8
# 1.6.9 -- ADTPro 2.0.0
# new A2CLOUD disks with A2PI client 1.8
# 1.6.8 -- ADTPro 1.3.0
# tests for adtpro existence with either adtpro.sh or ADTPro.html
# installs ttytter from its home page, not via apt-get (because it's in non-free, which is not enabled by default in debian)
# 1.6.7 -- cppo installed from a2cloud directory on web server (a2server has symlink)
# fixed cppo -e bug that always created a resource fork file even if there is no resource fork
# shk2image leaves nothing behind in /tmp
# wildcard copy all files on A2PI disk except PRODOS/BASIC.SYSTEM/*A3* to A2CLOUD disks when building
# @ √ new A2CLOUD disks with A2PI client 1.4
# % update before install for a2chat/a2news/kegs/kegs-setup/linapple/gsport/gsport-setup
# disables IPv6 for exim4 to properly prevent startup error messages; restores log folder if not there
# ^@ A2CLOUD.HDV is now A2CLOUD.PO (with symlink to A2CLOUD.HDV)
# √ renamed MACRO files on server to be .txt and moved to files
# ^@ √ new startup app on disk to make it easier to get to A2PI
# a2cloud-setup updates a2news/a2chat/kegs/kegs-setup/linapple wrappers
# added screen to a2cloud-help
# 1.6.6 -- installs Screen
# installs curl if not installed (for ttytter)
# ttytter alias works correctly if run under Screen
# a2cloudrc is now downloaded rather than created by script
# LANG is now set in /usr/local/etc/a2cloud-lang rather than in a2cloudrc
# fixed bug which checked for nulib2 instead of unar when seeing if needing to compile
# opens terminal window in lxde on startup
# setup -v displays available and installed versions
# setup -y now bypasses all prompts; -n removed
# % setup exits properly whether run via source or shell
# moved cftp to files
# support for x86 Debian/Ubuntu:
# compiles binaries rather than downloads if not running on Pi
# gets and supports Oracle x86 Java if not on Pi
# installs X11 and LXDE if not installed
# ttyUSBupper is always ttyUSB0, ttyUSBlower is always ttyUSB1
# adtpro.sh supports USB-to-serial on all architectures
# 1.6.5 -- term command accepts mono/color/none as synonyms for vt100/pcansi/dumb
# minor reorganization of configuration of a2cloudrc and screenrc
# 1.6.4 -- term command has -f argument to force action
# bash.bashrc now calls /usr/local/etc/a2cloudrc, which calls a2cloud-aliases
# support for screen command (preserves TERM environment variable in new screen)
# 1.6.3 -- sets ttytter to use ssl, and also 7-bit on serial port login, and ansi
# if using TERM=pcansi. Also provides Term::ReadLine::TTYtter for -readline option
# revised command line options and prompt for installing all or selective
# added appleiipi-update command
# 1.6.2 -- installs ISO-8859 (8-bit) character set for serial port login
# adds 'term' command for setting vt100 or ANSI emulation
# apt-get clean at end of A2CLOUD install
# installs sciibin and unblu
# a2cloud-update alias to a2cloud-setup
# 300 baud support by 'baud'
# prevents gsport (A2PI) from running when invoked from serial port
# cmd line option and prompt to install either all, or select individual
# revised intro language
# 1.6.1 -- installs telnet and ttytter
# prevents exim4 error messages after Tin installation
# 1.6.0 -- checks for ADTPro update
# updates ADTPro server and client software
# put adtpro version number into variable and removed hardcoding elsewhere
# asks for prodos volume name for new disk image; 8192 max
# fixed order of files on 140K disk to be consistent with 800K disk
# adtpro-start start now checks for USB adapter before starting
# restarts ADTPro server on vsd1/vsd2 after prompting
# created vsdsync alias to adtpro-restart; acmd warns if neeed
# acmd warns if vsd1/vsd2 changes, and advises vsdsync if so
# acmd now provides acmd help even on AppleCommander error
# 1.6.0 beta
#(unreleased)
# 1.5.3 -- gets motd from web
# prevents /var/log/exim4/paniclog from filling up
# sets password to apple2
# shares /usr/local/adtpro/disks to AFP & SMB
# don't prompt for restart after install by default
# avahi-daemon installed
# backup server for shrinkit
# 1.5.2 -- cleans up at end, downloads disks, full A2PI including extras,
# bug fixes, -h for options
# 1.5.1 -- added dos2pro
# 1.5 -- provides a2chat, a2news, kegs, linapple, a2pi
# 1.23 -- support for new A2PI client
# 1.22 -- downloads base gnustep library for unar/lsar, not full dev packages;
# will still download those and build if binary isn't available for some reason
# same goes for nulib2 and cftp. Should make for speedier install.
# adds A2PI client software to A2CLOUD disk
# disables console getty
# installs xrdp
# adds DSK2FILE to A2CLOUD disk
Reference in New Issue Copy Permalink