* Harmonize drive and disk type hierarchies
Before, the `XXXDrive` and `XXXDisk` type hierarchies were similar,
but not exactly the same. For example, `encoding` and `format` were
missing on some `XXXDisk` types where they existed on the `XXXDrive`
type. This change attempts to bring the hierarchies closer together.
However, the biggest visible consequence is the introduction of the
`FLOPPY_FORMATS` array and its associated `FloppyFormat` type. This
replaces `NIBBLE_FORMATS` in most places. A couple of new type guards
for disk formats and disks have been added as well.
All tests pass, everything compiles with no errors, and both WOZ and
nibble format disks load in the emulator.
* Move disk data to a `disk` field in the drive
Before, disk data was mixed in with state about the drive itself (like
track, motor phase, etc.). This made it hard to know exactly what data
was necessary for different image formats.
Now, the disk data is in a `disk` field whose type depends on the
drive type. This makes responisbility a bit easier.
One oddity, though, is that the `Drive` has metadata _and_ the `Disk`
has metadata. When a disk is in the drive, these should be `===`, but
when there is no disk in the drive, obviously only the drive metadata
is set.
All tests pass, everything compiles, and both WOZ and nibble disks
work in the emulator (both preact and classic).
* Squash the `Drive` type hierarchy
Before, the type of the drive depended on the type of the disk in the
drive. Thus, `NibbleDrive` contained a `NibbleDisk` and a `WozDrive`
contained a `WozDisk`. With the extraction of the disk data to a
single field, this type hierarchy makes no sense. Instead, it
suffices to check the type of the disk.
This change removes the `NibbleDrive` and `WozDrive` types and type
guards, checking the disk type where necessary. This change also
introduces the `NoFloppyDisk` type to represent the lack of a
disk. This allows the drive to have metadata, for one.
All tests pass, everything compiles, and both WOZ and nibble disks
work locally.
* Use more destructuring assignment
Now, more places use constructs like:
```TypeScript
const { metadata, readOnly, track, head, phase, dirty } = drive;
return {
disk: getDiskState(drive.disk),
metadata: {...metadata},
readOnly,
track,
head,
phase,
dirty,
};
```
* Remove the `Disk` object from the `Drive` object
This change splits out the disk objects into a record parallel to the
drive objects. The idea is that the `Drive` structure becomes a
representation of the state of the drive that is separate from the
disk image actually in the drive. This helps in an upcoming
refactoring.
This also changes the default empty disks to be writable. While odd,
the write protect switch should be in the "off" position since there
is no disk pressing on it.
Finally, `insertDisk` now resets the head position to 0 since there is
no way of preserving the head position across disks. (Even in the real
world, the motor-off delay plus spindle spin-down would make it
impossible to know the disk head position with any accuracy.)
This adds both the recommended TypeScript checks, plus the recommended
TypeScript checks that require type checking. This latter addition
means that eslint essentially has to compile all of the TypeScript in
the project, causing it to be slower. This isn't much of a problem in
VS Code because there's a lot of caching being done, but it's clearly
slower when run on the commandline.
All of the errors are either fixed or suppressed. Some errors are
suppressed because fixing them would be too laborious for the little
value gained.
The eslint config is also slightly refactored to separate the strictly
TypeScript checks from the JavaScript checks.
