* Harmonize drive and disk type hierarchies
Before, the `XXXDrive` and `XXXDisk` type hierarchies were similar,
but not exactly the same. For example, `encoding` and `format` were
missing on some `XXXDisk` types where they existed on the `XXXDrive`
type. This change attempts to bring the hierarchies closer together.
However, the biggest visible consequence is the introduction of the
`FLOPPY_FORMATS` array and its associated `FloppyFormat` type. This
replaces `NIBBLE_FORMATS` in most places. A couple of new type guards
for disk formats and disks have been added as well.
All tests pass, everything compiles with no errors, and both WOZ and
nibble format disks load in the emulator.
* Move disk data to a `disk` field in the drive
Before, disk data was mixed in with state about the drive itself (like
track, motor phase, etc.). This made it hard to know exactly what data
was necessary for different image formats.
Now, the disk data is in a `disk` field whose type depends on the
drive type. This makes responisbility a bit easier.
One oddity, though, is that the `Drive` has metadata _and_ the `Disk`
has metadata. When a disk is in the drive, these should be `===`, but
when there is no disk in the drive, obviously only the drive metadata
is set.
All tests pass, everything compiles, and both WOZ and nibble disks
work in the emulator (both preact and classic).
* Squash the `Drive` type hierarchy
Before, the type of the drive depended on the type of the disk in the
drive. Thus, `NibbleDrive` contained a `NibbleDisk` and a `WozDrive`
contained a `WozDisk`. With the extraction of the disk data to a
single field, this type hierarchy makes no sense. Instead, it
suffices to check the type of the disk.
This change removes the `NibbleDrive` and `WozDrive` types and type
guards, checking the disk type where necessary. This change also
introduces the `NoFloppyDisk` type to represent the lack of a
disk. This allows the drive to have metadata, for one.
All tests pass, everything compiles, and both WOZ and nibble disks
work locally.
* Use more destructuring assignment
Now, more places use constructs like:
```TypeScript
const { metadata, readOnly, track, head, phase, dirty } = drive;
return {
disk: getDiskState(drive.disk),
metadata: {...metadata},
readOnly,
track,
head,
phase,
dirty,
};
```
* Remove the `Disk` object from the `Drive` object
This change splits out the disk objects into a record parallel to the
drive objects. The idea is that the `Drive` structure becomes a
representation of the state of the drive that is separate from the
disk image actually in the drive. This helps in an upcoming
refactoring.
This also changes the default empty disks to be writable. While odd,
the write protect switch should be in the "off" position since there
is no disk pressing on it.
Finally, `insertDisk` now resets the head position to 0 since there is
no way of preserving the head position across disks. (Even in the real
world, the motor-off delay plus spindle spin-down would make it
impossible to know the disk head position with any accuracy.)
* Add `DiskMetada` to the `Disk` interface
Before, metadata about the image, such as name, side, etc. was mixed
in with actual disk image information. This change breaks that
information into a separate structure called `DiskMetadata`.
Currently, the only two fields are `name` and `side`, but the idea is
that more fields could be added as necessary, like a description, a
scan of the disk or label, etc. In a follow-on change, the default
write-protection status will come from the metadata as well.
The current implementation copies the metadata when saving/restoring
state, loading disk images, etc. In the future, the metadata should
passed around until the format is required to change (like saving one
disk image format as another). Likewise, in the future, in may be
desirable to be able to override the disk image metadata with
user-supplied metadata. This could be use, for example, to
temporarily add or remove write-protection from a disk image.
All existing tests pass and the emulator builds with no errors.
* Rename `writeMode` to `q7`
Before, nibble disk emulation used the `writeMode` field to keep track
of whether the drive should be read from or written to, but the WOZ
emulation used `q7` to keep track of the same state.
This change renames `writeMode` to `q7` because it more accurately
reflects the state of the Disk II controller as specified in the
manuals, DOS source, and, especially, _Understanding the Apple //e_ by
Jim Sather.
* Remove the coil state
Before, `q` captured the state of the coils. But it was never read.
This change just deletes it.
* Use the bootstrap and sequencer ROMs with indirection
Before, the contents of the bootstrap ROM and sequencer ROM were set
directly on fields of the controller. These were not saved or
restored with the state in `getState` and `setState`. (It would have
been very space inefficient if they had).
Now, these ROMs are used from constants indexed by the number of
sectors the card supports. This, in turn, means that if the number of
sectors is saved with the state, it can be easily restored.
* Split out the Disk II controller state
This change factors the emulated hardware state into a separate
structure in the Disk II controller. The idea is that this hardware
state will be able to be shared with the WOZ and nibble disk code
instead of sharing _all_ of the controller state (like callbacks and
so forth).
* Factor out disk insertion
Before, several places in the code essentially inserted a new disk
image into the drive, which similar—but not always exactly the
same—code. Now there is an `insertDisk` method that is responsible
for inserting a new `FloppyDisk`.
All tests pass, everything compiles, manually tested nibble disks and
WOZ disks.
* Add a test for the dirty callback on writes
This new test just checks that a clean disk becomes dirty after a
write _and_ that the dirty callback is fired.
* Add tests for WOZ disks
The new tests verify the basic read behavior of the state sequencer on
well-behaved disks, including sync bytes and so on. Write tests are
still to come.
There's also a change to the Woz format to return the info chunk data
as well.
This adds both the recommended TypeScript checks, plus the recommended
TypeScript checks that require type checking. This latter addition
means that eslint essentially has to compile all of the TypeScript in
the project, causing it to be slower. This isn't much of a problem in
VS Code because there's a lot of caching being done, but it's clearly
slower when run on the commandline.
All of the errors are either fixed or suppressed. Some errors are
suppressed because fixing them would be too laborious for the little
value gained.
The eslint config is also slightly refactored to separate the strictly
TypeScript checks from the JavaScript checks.
Disk side information was being dropped and thus not displayable in the UI. This plumbs the value through various formats and adds some light testing.
Also fixes an issue where URL encoded hashes were not properly interpreted.
