Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
/*
|
|
|
|
* NuFX archive manipulation library
|
|
|
|
* Copyright (C) 2000-2007 by Andy McFadden, All Rights Reserved.
|
|
|
|
* This is free software; you can redistribute it and/or modify it under the
|
|
|
|
* terms of the BSD License, see the file COPYING-LIB.
|
|
|
|
*
|
|
|
|
* Get/set certain values and attributes.
|
|
|
|
*/
|
|
|
|
#include "NufxLibPriv.h"
|
|
|
|
|
|
|
|
#define kMaxJunkSkipMax 8192
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get a configurable parameter.
|
|
|
|
*/
|
2015-01-04 19:29:51 +00:00
|
|
|
NuError Nu_GetValue(NuArchive* pArchive, NuValueID ident, NuValue* pValue)
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
{
|
|
|
|
NuError err = kNuErrNone;
|
|
|
|
|
2015-01-04 19:29:51 +00:00
|
|
|
if (pValue == NULL)
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
return kNuErrInvalidArg;
|
|
|
|
|
|
|
|
switch (ident) {
|
|
|
|
case kNuValueAllowDuplicates:
|
|
|
|
*pValue = pArchive->valAllowDuplicates;
|
|
|
|
break;
|
|
|
|
case kNuValueConvertExtractedEOL:
|
|
|
|
*pValue = pArchive->valConvertExtractedEOL;
|
|
|
|
break;
|
|
|
|
case kNuValueDataCompression:
|
|
|
|
*pValue = pArchive->valDataCompression;
|
|
|
|
break;
|
|
|
|
case kNuValueDiscardWrapper:
|
|
|
|
*pValue = pArchive->valDiscardWrapper;
|
|
|
|
break;
|
|
|
|
case kNuValueEOL:
|
|
|
|
*pValue = pArchive->valEOL;
|
|
|
|
break;
|
|
|
|
case kNuValueHandleExisting:
|
|
|
|
*pValue = pArchive->valHandleExisting;
|
|
|
|
break;
|
|
|
|
case kNuValueIgnoreCRC:
|
|
|
|
*pValue = pArchive->valIgnoreCRC;
|
|
|
|
break;
|
|
|
|
case kNuValueMaskDataless:
|
|
|
|
*pValue = pArchive->valMaskDataless;
|
|
|
|
break;
|
|
|
|
case kNuValueMimicSHK:
|
|
|
|
*pValue = pArchive->valMimicSHK;
|
|
|
|
break;
|
|
|
|
case kNuValueModifyOrig:
|
|
|
|
*pValue = pArchive->valModifyOrig;
|
|
|
|
break;
|
|
|
|
case kNuValueOnlyUpdateOlder:
|
|
|
|
*pValue = pArchive->valOnlyUpdateOlder;
|
|
|
|
break;
|
|
|
|
case kNuValueStripHighASCII:
|
|
|
|
*pValue = pArchive->valStripHighASCII;
|
|
|
|
break;
|
|
|
|
case kNuValueJunkSkipMax:
|
|
|
|
*pValue = pArchive->valJunkSkipMax;
|
|
|
|
break;
|
|
|
|
case kNuValueIgnoreLZW2Len:
|
|
|
|
*pValue = pArchive->valIgnoreLZW2Len;
|
|
|
|
break;
|
|
|
|
case kNuValueHandleBadMac:
|
|
|
|
*pValue = pArchive->valHandleBadMac;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
err = kNuErrInvalidArg;
|
|
|
|
Nu_ReportError(NU_BLOB, err, "Unknown ValueID %d requested", ident);
|
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
|
|
|
|
bail:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Set a configurable parameter.
|
|
|
|
*/
|
2015-01-04 19:29:51 +00:00
|
|
|
NuError Nu_SetValue(NuArchive* pArchive, NuValueID ident, NuValue value)
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
{
|
|
|
|
NuError err = kNuErrInvalidArg;
|
|
|
|
|
|
|
|
switch (ident) {
|
|
|
|
case kNuValueAllowDuplicates:
|
|
|
|
if (value != true && value != false) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueAllowDuplicates value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valAllowDuplicates = value;
|
|
|
|
break;
|
|
|
|
case kNuValueConvertExtractedEOL:
|
|
|
|
if (value < kNuConvertOff || value > kNuConvertAuto) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueConvertExtractedEOL value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valConvertExtractedEOL = value;
|
|
|
|
break;
|
|
|
|
case kNuValueDataCompression:
|
|
|
|
if (value < kNuCompressNone || value > kNuCompressBzip2) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueDataCompression value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valDataCompression = value;
|
|
|
|
break;
|
|
|
|
case kNuValueDiscardWrapper:
|
|
|
|
if (value != true && value != false) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueDiscardWrapper value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valDiscardWrapper = value;
|
|
|
|
break;
|
|
|
|
case kNuValueEOL:
|
|
|
|
if (value < kNuEOLUnknown || value > kNuEOLCRLF) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueEOL value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valEOL = value;
|
|
|
|
break;
|
|
|
|
case kNuValueHandleExisting:
|
|
|
|
if (value < kNuMaybeOverwrite || value > kNuMustOverwrite) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueHandleExisting value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valHandleExisting = value;
|
|
|
|
break;
|
|
|
|
case kNuValueIgnoreCRC:
|
|
|
|
if (value != true && value != false) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueIgnoreCRC value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valIgnoreCRC = value;
|
|
|
|
break;
|
|
|
|
case kNuValueMaskDataless:
|
|
|
|
if (value != true && value != false) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueMaskDataless value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valMaskDataless = value;
|
|
|
|
break;
|
|
|
|
case kNuValueMimicSHK:
|
|
|
|
if (value != true && value != false) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueMimicSHK value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valMimicSHK = value;
|
|
|
|
break;
|
|
|
|
case kNuValueModifyOrig:
|
|
|
|
if (value != true && value != false) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueModifyOrig value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valModifyOrig = value;
|
|
|
|
break;
|
|
|
|
case kNuValueOnlyUpdateOlder:
|
|
|
|
if (value != true && value != false) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueOnlyUpdateOlder value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valOnlyUpdateOlder = value;
|
|
|
|
break;
|
|
|
|
case kNuValueStripHighASCII:
|
|
|
|
if (value != true && value != false) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueStripHighASCII value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valStripHighASCII = value;
|
|
|
|
break;
|
|
|
|
case kNuValueJunkSkipMax:
|
|
|
|
if (value > kMaxJunkSkipMax) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueJunkSkipMax value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valJunkSkipMax = value;
|
|
|
|
break;
|
|
|
|
case kNuValueIgnoreLZW2Len:
|
|
|
|
if (value != true && value != false) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueIgnoreLZW2Len value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valIgnoreLZW2Len = value;
|
|
|
|
break;
|
|
|
|
case kNuValueHandleBadMac:
|
|
|
|
if (value != true && value != false) {
|
|
|
|
Nu_ReportError(NU_BLOB, err,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Invalid kNuValueHandleBadMac value %u", value);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
pArchive->valHandleBadMac = value;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
Nu_ReportError(NU_BLOB, err, "Unknown ValueID %d requested", ident);
|
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = kNuErrNone;
|
|
|
|
|
|
|
|
bail:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Get an archive attribute. These are things that you would have to
|
|
|
|
* pry into pArchive to get at (like the archive type) or get the master
|
|
|
|
* header (like the number of records).
|
|
|
|
*/
|
2015-01-04 19:29:51 +00:00
|
|
|
NuError Nu_GetAttr(NuArchive* pArchive, NuAttrID ident, NuAttr* pAttr)
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
{
|
|
|
|
NuError err = kNuErrNone;
|
2015-01-04 19:29:51 +00:00
|
|
|
if (pAttr == NULL)
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
return kNuErrInvalidArg;
|
|
|
|
|
|
|
|
switch (ident) {
|
|
|
|
case kNuAttrArchiveType:
|
|
|
|
*pAttr = pArchive->archiveType;
|
|
|
|
break;
|
|
|
|
case kNuAttrNumRecords:
|
|
|
|
*pAttr = pArchive->masterHeader.mhTotalRecords;
|
|
|
|
break;
|
|
|
|
case kNuAttrHeaderOffset:
|
|
|
|
*pAttr = pArchive->headerOffset;
|
|
|
|
break;
|
|
|
|
case kNuAttrJunkOffset:
|
|
|
|
*pAttr = pArchive->junkOffset;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
err = kNuErrInvalidArg;
|
|
|
|
Nu_ReportError(NU_BLOB, err, "Unknown AttrID %d requested", ident);
|
|
|
|
goto bail;
|
|
|
|
}
|
|
|
|
|
|
|
|
bail:
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Convert a NuValue compression type to a "phyiscal" ThreadFormat.
|
|
|
|
*
|
|
|
|
* Unsupported compression types cause a warning to be flagged.
|
|
|
|
*/
|
2015-01-04 19:29:51 +00:00
|
|
|
NuThreadFormat Nu_ConvertCompressValToFormat(NuArchive* pArchive,
|
|
|
|
NuValue compValue)
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
{
|
|
|
|
NuThreadFormat threadFormat;
|
|
|
|
Boolean unsup = false;
|
|
|
|
|
|
|
|
switch (compValue) {
|
|
|
|
case kNuCompressNone: threadFormat = kNuThreadFormatUncompressed; break;
|
|
|
|
|
|
|
|
#ifdef ENABLE_SQ
|
|
|
|
case kNuCompressSQ: threadFormat = kNuThreadFormatHuffmanSQ; break;
|
|
|
|
#else
|
|
|
|
case kNuCompressSQ: threadFormat = kNuThreadFormatHuffmanSQ;
|
|
|
|
unsup = true; break;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef ENABLE_LZW
|
|
|
|
case kNuCompressLZW1: threadFormat = kNuThreadFormatLZW1; break;
|
|
|
|
case kNuCompressLZW2: threadFormat = kNuThreadFormatLZW2; break;
|
|
|
|
#else
|
|
|
|
case kNuCompressLZW1: threadFormat = kNuThreadFormatLZW1;
|
|
|
|
unsup = true; break;
|
|
|
|
case kNuCompressLZW2: threadFormat = kNuThreadFormatLZW2;
|
|
|
|
unsup = true; break;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef ENABLE_LZC
|
|
|
|
case kNuCompressLZC12: threadFormat = kNuThreadFormatLZC12; break;
|
|
|
|
case kNuCompressLZC16: threadFormat = kNuThreadFormatLZC16; break;
|
|
|
|
#else
|
|
|
|
case kNuCompressLZC12: threadFormat = kNuThreadFormatLZC12;
|
|
|
|
unsup = true; break;
|
|
|
|
case kNuCompressLZC16: threadFormat = kNuThreadFormatLZC16;
|
|
|
|
unsup = true; break;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef ENABLE_DEFLATE
|
|
|
|
case kNuCompressDeflate: threadFormat = kNuThreadFormatDeflate; break;
|
|
|
|
#else
|
|
|
|
case kNuCompressDeflate: threadFormat = kNuThreadFormatDeflate;
|
|
|
|
unsup = true; break;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef ENABLE_BZIP2
|
|
|
|
case kNuCompressBzip2: threadFormat = kNuThreadFormatBzip2; break;
|
|
|
|
#else
|
|
|
|
case kNuCompressBzip2: threadFormat = kNuThreadFormatBzip2;
|
|
|
|
unsup = true; break;
|
|
|
|
#endif
|
|
|
|
|
|
|
|
default:
|
|
|
|
Nu_ReportError(NU_BLOB, kNuErrInvalidArg,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Unknown compress value %u", compValue);
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
Assert(false);
|
|
|
|
return kNuThreadFormatUncompressed;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (unsup) {
|
|
|
|
Nu_ReportError(NU_BLOB, kNuErrNone,
|
2015-01-04 19:29:51 +00:00
|
|
|
"Unsupported compression 0x%04x requested (%u), storing",
|
Large set of changes to restore CiderPress build.
CiderPress and MDC now compile, and execute far enough to open
their respective "about" boxes, but I doubt they'll do much
more than that.
* Switch from MBCS to UNICODE APIs
Microsoft switched to UTF-16 (by way of UCS-2) a long time ago,
and the support for MBCS seems to be getting phased out. So it's
time to switch to wide strings.
This is a bit awkward for CiderPress because it works with disk
and file archives with 8-bit filenames, and I want NufxLib and
DiskImgLib to continue to work on Linux (which has largely taken
the UTF-8 approach to Unicode). The libraries will continue to
work with 8-bit filenames, with CiderPress/MDC doing the
conversion at the appropriate point.
There were a couple of places where strings from a structure
handed back by one of the libraries were used directly in the UI,
or vice-versa, which is a problem because we have nowhere to
store the result of the conversion. These currently have fixed
place-holder "xyzzy" strings.
All UI strings are now wide.
Various format strings now use "%ls" and "%hs" to explicitly
specify wide and narrow. This doesn't play well with gcc, so
only the Windows-specific parts use those.
* Various updates to vcxproj files
The project-file conversion had some cruft that is now largely
gone. The build now has a common output directory for the EXEs
and libraries, avoiding the old post-build copy steps.
* Added zlib 1.2.8 and nufxlib 2.2.2 source snapshots
The old "prebuilts" directory is now gone. The libraries are now
built as part of building the apps.
I added a minimal set of files for zlib, and a full set for nufxlib.
The Linux-specific nufxlib goodies are included for the benefit of
the Linux utilities, which are currently broken (don't build).
* Replace symbols used for include guards
Symbols with a leading "__" are reserved.
2014-11-10 23:32:55 +00:00
|
|
|
threadFormat, compValue);
|
|
|
|
return kNuThreadFormatUncompressed;
|
|
|
|
}
|
|
|
|
|
|
|
|
return threadFormat;
|
|
|
|
}
|
|
|
|
|